To obtain a stable amplified spontaneous emission（ASE） source for complex environment applications, we design an ASE source and study the output power and spectral characteristics under different ambient temperature...To obtain a stable amplified spontaneous emission（ASE） source for complex environment applications, we design an ASE source and study the output power and spectral characteristics under different ambient temperatures.We optimize the structure of the ASE source to flatten the ASE spectrum, and study the output characteristics in terms of output power and optical spectrum under different pump powers. Then the performance of the ASE source is investigated in the temperature range from-18.9°C to 50°C. A stable-power and flat-spectrum ASE source can be obtained by structural optimization and pump control.展开更多
A model of three-level amplified spontaneous emission(ASE)sources,considering radiation effect,is proposed to predict radiation induced loss of output power in radiation environment.Radiation absorption parameters of ...A model of three-level amplified spontaneous emission(ASE)sources,considering radiation effect,is proposed to predict radiation induced loss of output power in radiation environment.Radiation absorption parameters of ASE sources model are obtained by the fitting of color centers generation and recovery process of gain loss data at lower dose rate.Gain loss data at higher dose is applied for self-validating.This model takes both the influence of erbium ions absorption and photon bleaching effect into consideration,which makes the prediction of different dose and dose rate more accurate and flexible.The fitness value between ASE model and gain loss data is 99.98%,which also satisfies the extrapolation at the low dose rate.The method and model may serve as a valuable tool to predict ASE performance in harsh environment.展开更多
根据三轴光纤陀螺的高精度需求,采用大功率高稳定性的高精度双程后向方案掺铒光纤光源。通过对ASE光源的理论分析建立数学模型,并根据所用掺铒光纤及泵浦光源的参数对光源进行谱型分析,确定光路方案。再以掺铒光纤和泵浦激光器的温度特...根据三轴光纤陀螺的高精度需求,采用大功率高稳定性的高精度双程后向方案掺铒光纤光源。通过对ASE光源的理论分析建立数学模型,并根据所用掺铒光纤及泵浦光源的参数对光源进行谱型分析,确定光路方案。再以掺铒光纤和泵浦激光器的温度特性和补偿为研究重点,对掺铒光纤的长度和掺杂浓度以及泵浦功率和铒纤的匹配性进行试验,最终采用铒纤长度19 m,泵浦波长974.6 nm,泵浦功率140 m A,得到光源光功率为20 m W,平均波长变化量小于0.5′10^(-6)/℃,满足光纤陀螺对ASE光源的要求。展开更多
A two-electrode multi-quantum-well semiconductor optical amplifier is designed and fabricated.The amplified spontaneous emission（ASE）spectrum and gain were measured and analyzed.It is shown that the ASE spectrum and...A two-electrode multi-quantum-well semiconductor optical amplifier is designed and fabricated.The amplified spontaneous emission（ASE）spectrum and gain were measured and analyzed.It is shown that the ASE spectrum and gain characteristic are greatly influenced by the distribution of the injection current density.By changing the injection current density of two electrodes,the full width at half maximum,peak wavelength,peak power of the ASE spectrum and the gain characteristic can be easily controlled.展开更多
The superfluorescent Yb-doped fiber source operating near 980 nm is studied. The design requirement is theoretically discussed aiming to suppress the amplified spontaneous emission around 1030 nm in the 980-rim superf...The superfluorescent Yb-doped fiber source operating near 980 nm is studied. The design requirement is theoretically discussed aiming to suppress the amplified spontaneous emission around 1030 nm in the 980-rim superfluorescent fiber source. Based on the theoretical study, a multi-Watt, all-fiber, bi-directional, pumped, superfluorescent source operating near 980 nm is designed and experimentally demonstrated for the first time, to the best of our knowledge. The recorded 8.38-W combined output power is obtained with a 3-dB bandwidth about 3.5 nm. The power scaling of the 980-nm superlfuorescent fiber source is limited by the parasitic laser oscillation.展开更多
For all optical Wavelength Division Multiplexing (WDM) network based on G.653 fibers, we investigate the quality factor deterioration due to combined nonlinear effects and Amplified spontaneous emission (ASE) noise fo...For all optical Wavelength Division Multiplexing (WDM) network based on G.653 fibers, we investigate the quality factor deterioration due to combined nonlinear effects and Amplified spontaneous emission (ASE) noise for system parameters based on ITU-T Recommendation G.692. The investigation: (a) emphasizes on stimulated Raman scattering (SRS) and four wave mixing (FWM) effects which are the dominant nonlinearities known to limit WDM system performance and (b) accounts for beating between nonlinearities and beating between ASE noise and nonlinearities. Using the proposed model, performance of the worst affected channels due to SRS and FWM is compared and the results indicate that the worst affected channel due to SRS performs better and hence must be preferred for reliable and efficient transmission over the worst affected channel due to FWM. Further, the results suggest that to achieve a desired error rate (quality factor);there exists an optimal value of channel spacing for a given number of channels. The proposed theoretical model is also validated through extensive simulations over Rsoft OptSimTM simulator and the two sets of results are found to match, indicating that the proposed model accurately calculates the quality factor of the all optical WDM network.展开更多
A new type of gain flattening filter for amplified spontaneous emission （ASE） source based on erbium doped fiber （EDF） is proposed and demonstrated by fabricating and writing two series ultra-long period fiber gra...A new type of gain flattening filter for amplified spontaneous emission （ASE） source based on erbium doped fiber （EDF） is proposed and demonstrated by fabricating and writing two series ultra-long period fiber grating （ULPFG） on single mode fiber （SMF-28）. The novelty method in this research is based on writing the two ULPFGs as fat gratings. The LPG is written by a simple and available arc-discharge method. The pump power based on single-pass backward pump configuration is around 100mW, and the average wavelength is near to 974nm. The gain flattening profile is obtained by 3.4 （±1.7）dB ripple in the wavelength range between 1524nm and 1565nm with 41-nm band width.展开更多
We present a cascaded system designed with Er^3+-Doped,Tm^3+-doped and Nd^3+-doped fibers to realize amplified spontaneous emission(ASE)spectra covering 0.4—2.0μm.The system is excited with a pump laser emitting 808...We present a cascaded system designed with Er^3+-Doped,Tm^3+-doped and Nd^3+-doped fibers to realize amplified spontaneous emission(ASE)spectra covering 0.4—2.0μm.The system is excited with a pump laser emitting 808 nm photons with 500 m W pump power.The emission spectra of the cascaded system covering0.4—2.0μm are realized with the Er^3+,Tm^3+and Nd^3+ion doping densities optimized to 8×10^19,2×10^20 and8×10^20 ion/m^3,respectively,and the fiber length optimized to 1 m.Numerical methods reveal that the peak ASE power for the cascaded system can reach 20.9 m W.A minimum ASE power of 4.39 m W is attainable.Using numerical calculations and analytical techniques,we provide a detailed insight into optimized Er^3+-doped,Tm^3+-doped and Nd^3+-doped fiber lengths and their doping concentrations for ASE power spectra covering 0.4—2.0μm.We believe that the cascaded system can potentially provide significant applications in various optical fields which include but not limited to wavelength-division multiplexing,various optical communications and other salient medical imaging processes.展开更多
基金Supported by the National Natural Science Foundation of China under Grant No 11504320
文摘To obtain a stable amplified spontaneous emission（ASE） source for complex environment applications, we design an ASE source and study the output power and spectral characteristics under different ambient temperatures.We optimize the structure of the ASE source to flatten the ASE spectrum, and study the output characteristics in terms of output power and optical spectrum under different pump powers. Then the performance of the ASE source is investigated in the temperature range from-18.9°C to 50°C. A stable-power and flat-spectrum ASE source can be obtained by structural optimization and pump control.
基金supported by the Aeronautical Science Foundation of China(Grant No.20170851007)。
文摘A model of three-level amplified spontaneous emission(ASE)sources,considering radiation effect,is proposed to predict radiation induced loss of output power in radiation environment.Radiation absorption parameters of ASE sources model are obtained by the fitting of color centers generation and recovery process of gain loss data at lower dose rate.Gain loss data at higher dose is applied for self-validating.This model takes both the influence of erbium ions absorption and photon bleaching effect into consideration,which makes the prediction of different dose and dose rate more accurate and flexible.The fitness value between ASE model and gain loss data is 99.98%,which also satisfies the extrapolation at the low dose rate.The method and model may serve as a valuable tool to predict ASE performance in harsh environment.
文摘根据三轴光纤陀螺的高精度需求,采用大功率高稳定性的高精度双程后向方案掺铒光纤光源。通过对ASE光源的理论分析建立数学模型,并根据所用掺铒光纤及泵浦光源的参数对光源进行谱型分析,确定光路方案。再以掺铒光纤和泵浦激光器的温度特性和补偿为研究重点,对掺铒光纤的长度和掺杂浓度以及泵浦功率和铒纤的匹配性进行试验,最终采用铒纤长度19 m,泵浦波长974.6 nm,泵浦功率140 m A,得到光源光功率为20 m W,平均波长变化量小于0.5′10^(-6)/℃,满足光纤陀螺对ASE光源的要求。
基金Supported by National 863 High Technology Projects(2003AA312100)the National 973 BasicResearch Projects(2003 CB314906)+1 种基金the National Natural Science Foundation Key Projects(60137010)the Tianjin Natural Science Foundation projects(033800211)
基金Project supported by the National High Technology Research and Development Program of China(No2007AA03Z414)the National Natural Science Foundation of China(No60777019)
文摘A two-electrode multi-quantum-well semiconductor optical amplifier is designed and fabricated.The amplified spontaneous emission（ASE）spectrum and gain were measured and analyzed.It is shown that the ASE spectrum and gain characteristic are greatly influenced by the distribution of the injection current density.By changing the injection current density of two electrodes,the full width at half maximum,peak wavelength,peak power of the ASE spectrum and the gain characteristic can be easily controlled.
基金Project supported by the National Natural Science Foundation of China(Grant No.61405249)
文摘The superfluorescent Yb-doped fiber source operating near 980 nm is studied. The design requirement is theoretically discussed aiming to suppress the amplified spontaneous emission around 1030 nm in the 980-rim superfluorescent fiber source. Based on the theoretical study, a multi-Watt, all-fiber, bi-directional, pumped, superfluorescent source operating near 980 nm is designed and experimentally demonstrated for the first time, to the best of our knowledge. The recorded 8.38-W combined output power is obtained with a 3-dB bandwidth about 3.5 nm. The power scaling of the 980-nm superlfuorescent fiber source is limited by the parasitic laser oscillation.
文摘For all optical Wavelength Division Multiplexing (WDM) network based on G.653 fibers, we investigate the quality factor deterioration due to combined nonlinear effects and Amplified spontaneous emission (ASE) noise for system parameters based on ITU-T Recommendation G.692. The investigation: (a) emphasizes on stimulated Raman scattering (SRS) and four wave mixing (FWM) effects which are the dominant nonlinearities known to limit WDM system performance and (b) accounts for beating between nonlinearities and beating between ASE noise and nonlinearities. Using the proposed model, performance of the worst affected channels due to SRS and FWM is compared and the results indicate that the worst affected channel due to SRS performs better and hence must be preferred for reliable and efficient transmission over the worst affected channel due to FWM. Further, the results suggest that to achieve a desired error rate (quality factor);there exists an optimal value of channel spacing for a given number of channels. The proposed theoretical model is also validated through extensive simulations over Rsoft OptSimTM simulator and the two sets of results are found to match, indicating that the proposed model accurately calculates the quality factor of the all optical WDM network.
文摘A new type of gain flattening filter for amplified spontaneous emission （ASE） source based on erbium doped fiber （EDF） is proposed and demonstrated by fabricating and writing two series ultra-long period fiber grating （ULPFG） on single mode fiber （SMF-28）. The novelty method in this research is based on writing the two ULPFGs as fat gratings. The LPG is written by a simple and available arc-discharge method. The pump power based on single-pass backward pump configuration is around 100mW, and the average wavelength is near to 974nm. The gain flattening profile is obtained by 3.4 （±1.7）dB ripple in the wavelength range between 1524nm and 1565nm with 41-nm band width.
基金the National Natural Science Foundation of China(Nos.60377023 and 60672017)the Program for New Century Excellent Talents in Universities(NCET)the Shanghai Optical Science and Technology Project(No.05DZ22009)
文摘We present a cascaded system designed with Er^3+-Doped,Tm^3+-doped and Nd^3+-doped fibers to realize amplified spontaneous emission(ASE)spectra covering 0.4—2.0μm.The system is excited with a pump laser emitting 808 nm photons with 500 m W pump power.The emission spectra of the cascaded system covering0.4—2.0μm are realized with the Er^3+,Tm^3+and Nd^3+ion doping densities optimized to 8×10^19,2×10^20 and8×10^20 ion/m^3,respectively,and the fiber length optimized to 1 m.Numerical methods reveal that the peak ASE power for the cascaded system can reach 20.9 m W.A minimum ASE power of 4.39 m W is attainable.Using numerical calculations and analytical techniques,we provide a detailed insight into optimized Er^3+-doped,Tm^3+-doped and Nd^3+-doped fiber lengths and their doping concentrations for ASE power spectra covering 0.4—2.0μm.We believe that the cascaded system can potentially provide significant applications in various optical fields which include but not limited to wavelength-division multiplexing,various optical communications and other salient medical imaging processes.
