Complex spherical-wave elastic inversion using amplitude and phase reflection information

Unlike the real-valued plane wave reflection coefficient(PRC)at the pre-critical incident angles,the frequency-and depth-dependent spherical-wave reflection coefficient(SRC)is more accurate and always a complex value,which contains more reflection amplitude and phase information.In near field,the imaginary part of complex SRC(phase)cannot be ignored,but it is rarely considered in seismic inversion.To promote the practical application of spherical-wave seismic inversion,a novel spherical-wave inversion strategy is implemented.The complex-valued spherical-wave synthetic seismograms can be obtained by using a simple harmonic superposition model.It is assumed that geophone can only record the real part of complex-valued seismogram.The imaginary part can be further obtained by the Hilbert transform operator.We also propose the concept of complex spherical-wave elastic impedance(EI)and the complex spherical-wave EI equation.Finally,a novel complex spherical-wave EI inversion approach is proposed,which can fully use the reflection information of amplitude,phase,and frequency.With the inverted complex spherical-wave EI,the velocities and density can be further extracted.Synthetic data and field data examples show that the elastic parameters can be reasonably estimated,which illustrate the potential of our spherical-wave inversion approach in practical applications.

Laser Intensity Variation in Amplitude and Phase Induced by Elliptically Polarized Feedback

The laser output characteristics under elliptically polarized optical feedback effect are studied. Elliptically polarized light is generated by wave plate placed in the feedback cavity. By analyzing the amplitude and phase of the laser output in the orthogonal direction, some new phenomena are firstly discovered and explained theoretically.Elliptically polarized feedback light is amplified in the gain medium in the resonator, and the direction perpendicular to the original polarization direction is easiest to oscillate. The laser intensity variation in amplitude and phase are related to the amplified mode and the anisotropy of external cavity. The theoretical analysis and experimental results agree well. Because the output characteristic of the laser has a relationship with the anisotropy of the external cavity, the phenomenon also provides a method for measuring birefringence.

FPGA-based amplitude and phase detection in DLLRF

The new generation particle accelerator requires a highly stable radio frequency（RF） system. The stability of the RF system is realized by the Low Level RF（LLRF） subsystem which controls the amplitude and phase of the RF signal. The detection of the RF signal＇s amplitude and phase is fundamental to LLRF controls. High-speed ADC（Analog to Digital Converter） ,DAC（Digital to Analog Converter） and FPGA（Field Programmable Gate Array） play very important roles in digital LLRF control systems. This paper describes the implementation of real-time amplitude and phase detection based of the FPGA with an analysis of the main factors that affect the detection accuracy such as jitter,algorithm＇s defects and non-linearity of devices,which is helpful for future work on high precision detection and control.

High accuracy amplitude and phase measurements based on a double heterodyne architecture

In the digital low level RF （LLRF） system of a circular （particle） accelerator, the RF field signal is usually down converted to a fixed intermediate frequency （IF）. The ratio of IF and sampling frequency determines the processing required, and differs in various LLRF systems. It is generally desirable to design a universally compatible architecture for different IFs with no change to the sampling frequency and algorithm. A new RF detection method based on a double heterodyne architecture for wide IF range has been developed, which achieves the high accuracy requirement of modern LLRF. In this paper, the relation of IF and phase error is systematically analyzed for the first time and verified by experiments. The effects of temperature drift for 16 h IF detection are inhibited by the amplitude and phase calibrations.

Spatial diversity and combination technology using amplitude and phase weighting method for phase-coherent underwater acoustic communications

The UWA channel is characterized as a time-dispersive rapidly fading channel, which in addition exhibits Doppler instabilities and limited bandwidth. To eliminate inter- symbol interference caused by multipath propagation, spatial diversity equalization is the main technical means. The paper combines the passive phase conjugation and spatial processing to maximize the output array gain. It uses signal-to-noise-plus-interference to evaluate the quality of signals received at different channels. The amplitude of signal is weighted using Sigmoid function. Second order PLL can trace the phase variation caused by channel, so the signal can be accumulated in the same phase. The signals received at different channels need to be normal- ized. It adopts fractional-decision feedback diversity equalizer （FDFDE） and achieves diversity equalization by using different channel weighted coefficients. The simulation and lake trial data processing results show that, the optimized diversity receiving equalization algorithm can im- prove communication system＇s ability in tracking the change of underwater acoustic channel, offset the impact of multipath and noise and improve the performance of communication system. The performance of the communication receiving system is better than that of the equal gain combination. At the same time, the bit error rate （BER） reduces 1.8%.

Optical bistability and multistability via amplitude and phase control in a Duplicated two-level system

We investigate the optical bistabiiity （OB） in a duplicated two-level system contained in a ring cavity. The atoms are driven by two orthogonally polarized fields with a relative phase. The OB behavior of such a system can be controlled by the amplitude and the relative phase of the coupling field, and it is possible to switch between bistabilitv and multistability by adjusting the relative phase.

Effect of Surface Roughness in Micro-nano Scale on Slotted Waveguide Arrays in Ku-band

Modeling of the roughness in micro-nano scale and its influence have not been fully investigated, however the roughness will cause amplitude and phase errors of the radiating slot, and decrease the precision and efficiency of the SWA in Ku-band. Firstly, the roughness is simulated using the electromechanical coupled（EC） model. The relationship between roughness and the antenna＇s radiation properties is obtained. For verification, an antenna proto- type is manufactured and tested, and the simulation method is introduced. According to the prototype, a contrasting experiment dealing with the flatness of the radiating plane is conducted to test the simulation method. The advantage of the EC model is validated by comparisons of the EC model and two classical roughness models （sine wave and fractal function）, which shows that the EC model gives a more accurate description model for roughness, the maxi- mum error is 13%. The existence of roughness strongly broadens the beamwidth and raises the side-lobe level of SWA, which is 1.2 times greater than the ideal antenna. In addition, effect of the EC model＇s evaluation indices is investigated, the most affected scale of the roughness is found, which is 1/10 of the working wavelength. The proposed research provides the instruction for antenna designing and manufacturing.

IMPACT OF WIDE-BAND I/Q MODULATION ERRORS IN SAR IMAGING ANALYSIS AND COMPENSATION METHOD RESAERCH

Direct quadrature modulation technology is suitable for wide-band radar signal generation. However, this method has rigorous requirements on amplitude and phase balance of the orthogonal input signals. If the requirements are not satisfied, there would be modulation errors such as image frequency and oscillator leakage that cannot be filtered. The modulation errors will therefore raise the noise floor of the range profile and reduce the dynamic range of the Synthetic Aperture Radar (SAR) image as a whole. In this paper, the wide-band In-phase/Quadrature-phase (I/Q) modulation errors are modeling analyzed, and the influence of wide-band I/Q modulation errors on SAR imaging is discussed. Furthermore, a compensation method of modulation errors is proposed, and the circuit implementation of the radar signal generation and pre-distortion is presented. The experimental results illustrate that the curves of the I/Q amplitude and phase imbalance errors are successfully extracted and the rejection of image frequency improved significantly, thus meets the requirements of the SAR imaging.

Improved STAP algorithm based on APES

Space-time adaptive processing（STAP） has been proven to be one of the best techniques capable of detecting weak moving targets in strong clutter environment and has been widely applied in airborne ground moving target indication（GMTI） radar.This paper applies an amplitude and phase estimation（APES） approach to two aspects of the STAP algorithm.Firstly,APES is applied to accurately describe the clutter characteristic in angle-Doppler domain.Then,APES is incorporated into the standard STAP algorithm to improve its performance without increasing transmitting/receiving channel and pulse number.The experimental examples show that the detection performance can be improved by using the APES technique,as well as the high computational complexity can be avoided.

VARIABLE STRUCTURE CONTROL APPLIED IN ELECTRO-HYDRAULIC SERVO SYSTEM WITH ANN

The variable structure control （VSC） theory is applied to the electro-hydraulic servo system here. The VSC control law is achieved using Lyapunov method and pole placement. To eliminate the chattering phenomena, a saturation function is adopted. The proposed VSC approach is fairly robust to load disturbance and system parameter variation. Since the distortion. including phase lag and amplitude attenuation occurs in the system sinusoid response, the amplitude and phase control （APC） algorithm, based on Adaline neural network and using LMS algorithm, is developed for distortion cancellation. The APC controller is simple and can on-line adjust, thus it gives accurate tracking.

Methods to Improve the Long Distance Time-Varying Channel Transmission Performance of Expendable Profiler

To improve the transmission performance of XCTD channel, this paper proposes a method to measure directly and fit the channel transmission characteristics by using frequency sweeping method. Sinusoidal signals with a frequency range of 100 Hz to 10 k Hz and an interval of 100 Hz are used to measure transmission characteristics of channels with lengths of 300 m, 800 m, 1300 m, and 1800 m. The correctness of the fitted channel characteristics by transmitting square wave, composite waves of different frequencies, and ASK modulation are verified. The results show that when the frequency of the signal is below 1500 Hz, the channel has very little effect on the signal. The signal compensated for amplitude and phase at the receiver is not as good as the uncompensated signal.Alternatively, when the signal frequency is above 1500 Hz, the channel distorts the signal. The quality of signal compensated for amplitude and phase at receiver is better than that of the uncompensated signal. Thus, we can select the appropriate frequency for XCTD system and the appropriate way to process the received signals. Signals below1500 Hz can be directly used at the receiving end. Signals above 1500 Hz are used after amplitude and phase compensation at the receiving end.

BEAM BROADENING SYNTHESIS FOR SAR ANTENNA ARRAY BASED ON PROJECTION MATRIX ALGORITHM

A new beam broadening synthesis technique for Synthetic Aperture Radar(SAR) antenna array, namely Projection Matrix Algorithm(PMA) is presented. The theory of PMA is introduced firstly, and then the iterative renewed manner is improved to resolve the unbalance problem under amplitude and phase control. In order to validate the algorithm correct and effective, an actual engineering application example is investigated. The beam synthesis results of 1.0~4.5 times broadening under the phase only control and the amplitude and phase control using improved PMA are given. The results show that the beam directivity, the beam broadening, and the side-lobe level requirements were met. It is demonstrated that the improved PMA was effective and feasible for SAR application.

Tri-frequency spectrum method and results for resolving the parameters of Earth's liquid core free nutation

The parameters of Earth free core nutation (FCN) are two relatively significant geophysical parameters. Sasao et al. (1980) and Wahr and Bergen (1986) provided the theoretical estimation values of FCN parameters. Gwinn, Herring and Shapiro (1987) first obtained the observational values of FCN parameters by very long base Interference (VLBI) at Cambridge University. In the same year, Neuberg and Zurn in former West Germany and Hinderer in France began to retrieve FCN parameters by the observation of gravity tides and introduced the stacking method. The other scholars who researched into the same geophysical problems by applying the data of gravity tides basically followed the stacking method. The results they reached were similar to the observational result of FCN parameters given by Neuberg et al. in 1987. But the observational results of FCN parameters gained from gravity tides were not identical with those from VLBI, mainly because of the large difference of quality of FCN. So there was not an affirmative observational result of FCN parameters since then. In this paper, The authors firstly introduce the tri-frequency spectrum method with clearly geometrical and geophysical meaning for the resolution of FCN parameters , and the observational results of FCN parameters obtained from tide data at three superconducting gravity stations were accordant with those from VLBI, which will be relatively important to arriving at a certain observational result of FCN parameters.

Modeling and simulation methods of sea clutter based on measured data

The modeling and simulation of sea clutter are important in detecting radar targets in sea backgrounds.Because the nonstationary property of sea clutter is ignored in traditional statistical models,a new method based on measured sea clutter is proposed in this paper.First,we convert the measured sea clutter data under different sea conditions[xI,xQ]into real amplitude SM.Instantaneous phaseθis then extracted from the coherent radar’s baseband data.Second,we select a candidate statistic model and estimate its parameters based on SM by utilizing maximum likelihood estimation.Finally,we generate random series A using corresponding random data generator and then add instantaneous phaseθinto A,i.e.,y=Ae^(jθ),to obtain simulated sea clutter series.Through a comparison of simulated sea clutter and measured sea clutter data via histogram,the validity of the proposed method is proved.

Physical layer data encryption using two-level constellation masking in 3D-CAP-PON

A novel physical layer data encryption scheme using two-level constellation masking in three-dimensional(3D)carrier-less amplitude and phase modulation(CAP)passive optical network(PON)is proposed in this Letter.The chaotic sequence generated by Chua’s circuit model realizes two-level encryption of displacement masking and constellation rotation for3 D constellations.We successfully conduct an experiment demonstrating 8.7 Gb/s 3 D-CAP-8 data transmission over25 km standard single-mode fiber.With two-level constellation masking,a key space size of 2.1×1085 is achieved to bring about high security and good encryption performance,suggesting broad application prospects in future short-range secure communications.