A 3-D Polarization Quadrature Amplitude Modulation Method and Constellation Mapping

As a new three-dimensional(3-D)modulation,Polarization Quadrature Amplitude Modulation(PQAM) can be regarded as the combination of Pulse amplitude modulation(PAM) and Quadrature Amplitude Modulation(QAM) Modulation.It can better improve the digital communication efficiency and reduce the Symbol error rate(SER) of the system than one-dimensional or two-dimensional modulation scheme.How to design a feasible constellation is the most concerned problem of PQAM currently.This paper first studies the relationship between the SER theoretical value of PQAM and the distribution of M and N,proposes a new M,N allocation scheme.Secondly,a new and straightforward design method of constructing higher-level 3-D signal constellations,which can be matched with the PQAM,and the constellation can divided into three different structures according to the ary for PQAM.Finally,the simulation results show that:in PQAM system,the modulation scheme and the constellation mapping scheme are proposed in this paper which can effectively reduce the system SER and improve the anti-noise performance of the system.

Speech Enhancement Algorithm Based on MMSE Short Time Spectral Amplitude in Whispered Speech

An improved method based on minimum mean square error-short time spectral amplitude （MMSE-STSA） is proposed to cancel background noise in whispered speech. Using the acoustic character of whispered speech, the algorithm can track the change of non-stationary background noise effectively. Compared with original MMSE-STSA algorithm and method in selectable mode Vo-coder （SMV）, the improved algorithm can further suppress the residual noise for low signal-to-noise radio （SNR） and avoid the excessive suppression. Simulations show that under the non-stationary noisy environment, the proposed algorithm can not only get a better performance in enhancement, but also reduce the speech distortion.

Effect of Surface Roughness in Micro-nano Scale on Slotted Waveguide Arrays in Ku-band

Modeling of the roughness in micro-nano scale and its influence have not been fully investigated, however the roughness will cause amplitude and phase errors of the radiating slot, and decrease the precision and efficiency of the SWA in Ku-band. Firstly, the roughness is simulated using the electromechanical coupled（EC） model. The relationship between roughness and the antenna＇s radiation properties is obtained. For verification, an antenna proto- type is manufactured and tested, and the simulation method is introduced. According to the prototype, a contrasting experiment dealing with the flatness of the radiating plane is conducted to test the simulation method. The advantage of the EC model is validated by comparisons of the EC model and two classical roughness models （sine wave and fractal function）, which shows that the EC model gives a more accurate description model for roughness, the maxi- mum error is 13%. The existence of roughness strongly broadens the beamwidth and raises the side-lobe level of SWA, which is 1.2 times greater than the ideal antenna. In addition, effect of the EC model＇s evaluation indices is investigated, the most affected scale of the roughness is found, which is 1/10 of the working wavelength. The proposed research provides the instruction for antenna designing and manufacturing.

Quality analysis of crustal tilt and strain observations in China's earthquakes in 2014

This work analyzes the quality of crustal tilt and strain observations during 2014, which were acquired from 269 sets of ground tiltmeters and 212 sets of strainmeters. In terms of data quality, the water tube tiltmeters presented the highest rate of excellent quality,approximately 91%, and the pendulum tiltmeters and ground strainmeters yielded rates of81% and 78%, respectively. This means that a total of 380 sets of instruments produced high-quality observational data suitable for scientific investigations and analyses.

Performance of M-QAM, M-DPSK and M-PSK with MRC diversity in a Nakagami-m fading channel

The nature of a wireless communication channel is very unpredictable. To design a good communication link, it is required to know the statistical model of the channel accurately. The average symbol error probability(ASER) was analyzed for different modulation schemes. A unified analytical framework was presented to obtain closed-form solutions for calculating the ASER of M-ary differential phase-shift keying(M-DPSK), coherent M-ary phase-shift keying(M-PSK), and quadrature amplitude modulation(QAM) over single or multiple Nakagami-m fading channels. Moreover, the ASER was estimated and evaluated by using the maximal ratio-combining(MRC) diversity technique. Simulation results show that an error rate of the fading channel typically depends on Nakagami parameters(m), space diversity(N), and symbol rate(M). A comparison between M-PSK, M-DPSK, and M-QAM modulation schemes was shown, and the results prove that M-ary QAM(M-QAM) demonstrates better performance compared to M-DPSK and M-PSK under all fading and non-fading conditions.