Transfer characteristics of dynamic biochemical signals in non-reversing pulsatile flows in a shallow Y-shaped microfluidic channel: signal filtering and nonlinear amplitude-frequency modulation

The transports of the dynamic biochemical signals in the non-reversing pulsatile flows in the mixing microchannel of a Y-shaped microfluidic device are ana- lyzed. The results show that the mixing micro-channel acts as a low-pass filter, and the biochemical signals are nonlinearly modulated by the pulsatile flows, which depend on the biochemical signal frequency, the flow signal frequency, and the biochemical signal transporting distance. It is concluded that, the transfer characteristics of the dynamic biochemical signals, which are transported in the time-varying flows, should be carefully considered for better loading biochemical signals on the cells cultured on the bottom of the microfluidic channel.

Vibration isolation performance analysis of a bilateral supported bio-inspired anti-vibration control system

To achieve better anti-vibration performance in a low frequency region and expand the range of vibration isolation,a bilateral supported bio-inspired anti-vibration(BBAV)structure composed of purely linear elements is proposed,inspired by the motion form of bird legs and the nonlinear extension and compression of muscles and tendons.The kinematic relations and nonlinear dynamic model considering vertical and rotational vibrations are established.The loading capacity and equivalent stiffness are investigated with key parameters.The amplitude-frequency characteristics and force transmissibility are used to evaluate the stability and anti-vibration performance with the effects of the excitation amplitude,rod length,installation angle,and spring stiffness.The results show that the loading requirements and resonant characteristics of the BBAV structure are adjustable,and superior vibration isolation performance can be achieved readily by tuning the parameters.The X-shaped vibration structure is sensitive to the spring stiffness,which exhibits a wider vibration isolation bandwidth with smaller spring stiffness.Besides,depending on the parameters,the nonlinear behavior of the BBAV system can be interconverted between the softening type and the hardening type.The theoretical analysis in this study demonstrates the advantages and effectiveness of the vibration isolation structure.

Impact Damage Identification of Aluminum Alloy Reinforced Plate Based on GWO-ELM Algorithm

As a critical structure of aerospace equipment,aluminum alloy stiffened plate will influence the stability of spacecraft in orbit and the normal operation of the system.In this study,a GWO-ELM algorithm-based impact damage identification method is proposed for aluminum alloy stiffened panels to monitor and evaluate the damage condition of such stiffened panels of spacecraft.Firstly,together with numerical simulation,the experimental simulation to obtain the damage acoustic emission signals of aluminum alloy reinforced panels is performed,to establish the damage data.Subsequently,the amplitude-frequency characteristics of impact damage signals are extracted and put into an extreme learning machine(ELM)model to identify the impact location and damage degree,and the Gray Wolf Optimization(GWO)algorithm is employed to update the weight parameters of the model.Finally,experiments are conducted on the irregular aluminum alloy stiffened plate with the size of 2200 mm×500 mm×10 mm,the identification accuracy of impact position and damage degree is 98.90% and 99.55% in 68 test areas,respectively.Comparative experiments with ELM and backpropagation neural networks(BPNN)demonstrate that the impact damage identification of aluminum alloy stiffened plate based on GWO-ELM algorithm can serve as an effective way to monitor spacecraft structural damage.

Nonlinear principal resonance of magneto-electro-elastic thin plate

Considering magneto-electro-elastic thin plate, the von Karman plate theory of large deflection and the geometric nonlinearity, the mathematical model of nonlinear undamped forced vibration is established. Making use of the improved Lindstedt-Poincare （L-P） method, the undamped forced vibration problem is solved, and the amplitude-frequency response equation of thin plate is obtained. Furthermore, the amplitude frequency response curves of system under different condi- tions are obtained by numerical simulation. The results show that the thickness of the plate, mechanical excitation, parame- ter e, pure piezoelectric material of BaTiO3, pure piezomagnetic material of CoFe2 04, different magneto-electro-elastic ma- terials of BaTiO3/CoFe2 04 and Terfenol-D/PZT will have an impact on the system frequency response. The main effects in- volve principal resonance interval, spring stiffness characteristic and amplitude jumping phenomena.

Rock fragmentation mechanisms and an experimental study of drilling tools during high-frequency harmonic vibration

Resonance drilling is a new technology, still at the laboratory stage. It has great potential to improve rock fragmentation efficiency. We analyzed the amplitude-frequency characteristics of steady- state mechanical vibration excited by harmonic vibration in rocks and an apparatus was built to achieve high fi＇equency vibration of rock. The influence of rock drillability, rotary speed, excitation frequency, and other parameters on the rate of penetration （ROP） in resonance drilling was analyzed. The results show that the rock drillability decreased with an increase in excitation frequency. When drilling with a large size drill bit, the ROP increased with excitation frequency. The ROP reached a maximum value at the resonant frequency of the rock. Tile ROP of the bit increased linearly with rotary speed when no vibration was applied on the rock and increased approximately exponentially when harmonic vibration was applied. In addition, the resonant frequency of the rock was changing during the process of rock fi＇agmentation, so in order to achieve tile desired resonance of the rock, it is necessary to detemaine an appropriate hamlonic vibration excitation frequency.

Digitalization of inverting filter shaping circuit for nuclear pulse signals

In the design of filter shaping circuits for nuclear pulse signals,inverting filter shaping circuits perform better than non-inverting filter shaping circuits.Because these circuits facilitate changing the phase of a pulse signal,they are widely used in processing nuclear pulse signals.In this study,the transfer functions of four types of inverting filter shaping circuits,namely the common inverting filter shaping,improved inverting filter shaping,multiple feedback low-pass filter shaping,and third-order multiple feedback low-pass filter shaping,in the Laplacian domain,are derived.We establish the numerical recursive function models and digitalize the four circuits,obtain the transfer functions in the Z domain,and analyze the filter performance and amplitude-frequency response characteristics in the frequency domain.Based on the actual nuclear pulse signal of the Si-PIN detector,we realize four types of inverting digital shaping.The results show that under the same shaping parameters,the common inverting digital shaping has better amplitude extraction characteristics,the third-order multiple feedback low-pass digital shaping has better noise suppression performance,and the multiple feedback digital shaping takes into account both pulse amplitude extraction and noise suppression performance.

Optimal design study of high order FIR digital filters based on neural network algorithm

An optimal design approach of high order FIR digital filter is developed based on the algorithm of neural networks with cosine basis function . The main idea is to minimize the sum of the square errors between the amplitude response of the desired FIR filter and that of the designed by training the weights of neural networks, then obtains the impulse response of FIR digital filter . The convergence theorem of the neural networks algorithm is presented and proved, and the optimal design method is introduced by designing four kinds of FIR digital filters , i.e., low-pass, high-pass, bandpass , and band-stop FIR digital filter. The results of the amplitude responses show that attenuation in stop-bands is more than 60 dB with no ripple and pulse existing in pass-bands, and cutoff frequency of passband and stop-band is easily controlled precisely .The presented optimal design approach of high order FIR digital filter is significantly effective.

A new method for improving the inductively coupled data transmission rate of mooring buoy based on carrier signal frequency selection

In the inductively coupled data transmission system of the mooring buoy, the carrier signal frequency of the transmission channel is limited due to the inherent characteristics of the system, resulting in limited channel bandwidth. The limited channel bandwidth limits the increase in inductively coupled data transmission rate.In order to improve the inductively coupled data transmission rate of mooring buoy as much as possible without damaging the data transmission performance, a new method was proposed in this paper. The method is proposed to improve the data transmission rate by selecting the appropriate carrier signal frequencies based on the principle of maximizing the amplitude value of amplitude-frequency characteristic curve of the system. Research has been done according to this method as follows. Firstly, according to the inductively coupled transmission mooring buoy structure, the inductively coupled data transmission circuit model was established. The binary frequency shift keying(2FSK) digital signal modulation mode was selected. Through theoretical analysis, the relation between the carrier signal frequency and the data transmission performance, the relation between the carrier signal frequency and the 2FSK signal bandwidth were obtained. Secondly, the performance and the bandwidth of the signal transmission were studied for the inherent characteristics of the actual inductively coupled data transmission system. The amplitude-frequency characteristic of the system was analyzed by experiments. By selecting the appropriate carrier signal frequency parameters, an excellent data transmission performance was guaranteed and a large 2FSK signal bandwidth was obtained. Finally, an inductively coupled data transmission rate optimization experiment and a bit error rate analysis experiment were designed and carried out. The results show that the high-speed and reliable data transmission of the system was realized and the rate can reach 100 kbps.

Pendulum-type laser strainmeter

Constructive disposition principles of the basic optical units of Michelson interferometers are used in making one-coordinate laser strainmeters of unequal-arm type. The fundamental advantages of pendulurn-type laser strainmeter more than classical-type laser strainmeter are displayed.

Nonlinear free vibration of reticulated shallow spherical shells taking into account transverse shear deformation

This paper deals with nonlinear free vibration of reticulated shallow spherical shells taking into account the effect of transverse shear deformation. The shell is formed by beam members placed in two orthogonal directions. The nondimensional fundamental governing equations in terms of the deflection, rotational angle, and force function are presented, and the solution for the nonlinear free frequency is derived by using the asymptotic iteration method. The asymptotic solution can be used readily to perform the parameter analysis of such space structures with numerous geometrical and material parameters. Numerical examples are given to illustrate the characteristic amplitudefrequency relation and softening and hardening nonlinear behaviors as well as the effect of transverse shear on the linear and nonlinear frequencies of reticulated shells and plates.

Thin-interbedded reservoirs prediction based on seismic sedimentology

Interference of thin-interbedded layers in seismic reflections has great negative impact on thin-interbedded reservoirs prediction.To deal with this,two novel methods are proposed that can predict the thin-interbedded reservoirs distribution through strata slices by suppressing the interference of adjacent layer with the help of seismic sedimentology.The plane distribution of single sand bodies in thin-interbedded reservoirs can be clarified.(1)The minimum interference frequency slicing method,uses the amplitude-frequency attribute estimated by wavelet transform to find a constant seismic frequency with the minimum influence on the stratal slice of target layer,and then an optimal slice corresponding the constant frequency mentioned above can be obtained.(2)The superimposed slicing method can calculate multiple interference coefficients of reservoir and adjacent layers of target geological body,and obtain superimposed slice by weighted stacking the multiple stratal slices of neighboring layers and target layer.The two proposed methods were used to predict the distribution of the target oil layers of 6 m thick in three sets of thin-interbedded reservoirs of Triassic Kelamayi Formation in the Fengnan area of Junggar Basin,Northwestern China.A comparison with drilling data and conventional stratal slices shows that the two methods can predict the distribution of single sand bodies in thin-interbedded reservoirs more accurately.

Disk Bimorph-Type Piezoelectric Energy Harvester

The study of the experimental investigation of a disk-type piezoelectric energy harvester presented. The harvester contains disk bimorph piezoceramic element of the umbrella form and contains two disk PZT plates. The element is excited at the base point at its center. The element is supplied by a loading ring mass to decrease its resonance frequency. The dependences of the vibration displacement along the radii of the bimorph and the ring mass from the frequency of excitation are presented and the output voltage frequency response is also presented as well. The idle mode and the load duty are investigated. The value of the internal resistance of the harvester is obtained using the load characteristic. The piezoelectric specific power is estimated experimentally.

Dynamic test methods for natural frequency of footbridge

Using environmental random vibration as the excitation,traditional accelerometer method,non-contact video method and non-contact laser method were employed to determine the natural frequency of Kunyu River footbridge.All the results of these three methods are close to 2.70 Hz,which are concordant with each other and hence credible.

Electrical characteristics of a fractional-order 3×n Fan network

In this article a new achievement of fractional-order 3×n Fan networks is presented.In the first step,the RT-I method is used to derive the general formulae of the equivalent impedance of fractional-order 3×n Fan networks.In the second part,the effects of five system parameters(L,C,n,α and β)on amplitude-frequency and phase-frequency characteristics are analyzed.At the same time,the amplitude-frequency and phase-frequency characteristics of the fractional order 3×n Fan network are revealed by Matlab drawing.This work has important theoretical and practical significance for resistor network models in the field of natural science and engineering technology.

Vertical-horizontal coupling nonlinear vibration characteristics of rolling mill under mixed lubrication

Considering the dynamic influence of the roll vibration on the lubricant film thickness in the rolling deformation area,nonlinear dynamic rolling forces related to film thickness in the vertical and horizontal directions were obtained based on the Karman balance theory.Based on these dynamic rolling forces and the mechanical vibration of the rolling mill,a vertical-horizontal coupling nonlinear vibration dynamic model was established.The amplitude-frequency equation of the main resonance was derived by using the multiple-scale method.At last,the parameters of the 1780 rolling mill were used for numerical simulation,and the time-domain response curves of the system’s vibration displacement and lubricating film thickness under the steady and unsteady conditions were analyzed.The influences of parameters such as interface contact ratio,nonlinear parameters and external disturbances on the primary resonance frequency characteristics were obtained,which provided a theoretical reference for the suppression of rolling mill vibration.

Characteristic of the equivalent impedance for an mxn RLC network with an arbitrary boundary

Considerable progress has been made recently in the development of techniques to determine exactly two-point resistances in networks of various topologies. In particular, a general resistance formula of a non-regular mxn resistor network with an arbitrary boundary is determined by the recursion-transform （RT） method. However, research on the complex impedance network is more difficult than that on the resistor network, and it is a problem worthy of study since the equivalent impedance has many different properties from equivalent resistance. In this study, the equivalent impedance of a non-regular mxn RLC network with an arbitrary boundary is studied based on the resistance formula, and the oscillation characteristics and resonance properties of the equivalent impedance are discovered. In the RLC network, it is found that our formula leads to the occurrence of resonances at the boundary condition holding a series of specific values with an external alternating current source. This curious result suggests the possibility of practical applications of our formula to resonant circuits.

A piecewise negative stiffness mechanism and its application in dynamic vibration absorber

A new type of piecewise negative stiffness(NS)mechanism is designed and the relationship between the force and displacement is studied.At first,the prototype of the piecewise NS mechanism is established,and the stiffness characteristic of this mechanism is analyzed.Then,the piecewise NS mechanism is applied to dynamic vibration absorber(DVA)system to establish a dynamic model with the piecewise linearity.The differential motion equations are derived according to Newton's law of mechanics.The approximate analytical solution and the amplitude frequency curve of the system with the piecewise NS are obtained by means of the averaging method.The correctness of the analytical solution is proved by comparing with the numerical solution.In the end,the comparisons with two other traditional DVAs show that the system in this paper has better vibration reduction effect under the condition of harmonic excitation and random excitation.

Dynamic numerical simulation on grinding medium flow field for vibration mill under various vibrating amplitude–frequency combination conditions

People gained limited progress on refinement of super-hard powder using the vibration mill for many years.According to various amplitude–frequency combination working conditions of vibration mill prototype,simulation research on dynamic characteristic of grinding medium flow field based on PFC is proposed in the paper,and a dynamics model of grinding medium flow field in barrel is established.Furthermore,trajectory image of medium flow,kinetic energy and strain energy and collision frequency can be obtained.The simulation analysis shows that collision between media as well as between media and the barrel can cause the changes of kinetic energy and strain energy of grinding medium flow under various amplitude–frequency combination conditions,and an energy-lacking region exists in the barrel.Contrast experiments under various working conditions show that kinetic energy and strain energy of grinding medium flow have large increment and energy-lacking regions become smaller,and then energy consumption decreases on working condition of high-amplitude and middle-frequency.The conclusion has practical value to refine powder by high-intensity vibration mill with certain frequency.