Experimental Study of Induced Polarization Effect in Unconventional Reservoir Rocks

Unconventional hydrocarbon reserves substantially surpass those of conventional resources and therefore are extremely economically attractive. However, exploration and production of uncon-ventional reserves is challenging. This paper demonstrates that one can observe significant induced polarization effects in shale reservoir rocks, which can be used in exploration for unconventional reserves. The generalized effective-medium theory of induced polarization (GEMTIP) was used to model the complex resistivity of shale rocks. We demonstrate that GEMTIP modeling provides an evaluation of mineral composition and volume fractions in rock samples. We have conducted spectral induced polarization (IP) measurements using different types of shale rocks to test the feasibility of the IP method and GEMTIP modeling for studying unconventional hydrocarbon (HC) reservoir rocks.

Some Experiences of Resistivity and Induced Polarization Methods on the Exploration of Sulfide: A Review

Sulfide minerals are a group of compounds with the presence of sulfur. This group’s most abundant and economically members are pyrites, pyrrhotite, chalcocite, galena, sphalerite, and the group of copper sulfides minerals. Resistivity and Induced Polarization (IP) methods, which play an essential role in mineral exploration, showed great success in sulfide exploration. This paper started on reviewing sulfide formation by giving details which help to understand their genesis better. To make the reader understand the procedures and appropriate mineral exploration methods, we have briefly covered the theory, the basic principles of resistivity and IP methods, and different investigation techniques using one, two, and three-dimensional surveys. Based on many electrical surveys, we discussed with examples of resistivity and IP methods applied to the exploration of sulfide deposits: the data inversion and interpretation of the geophysical signatures of most of the sulfide deposits in various geological environments were analyzed and end by showing both successful surveys and limitations of the methods.

Monitoring lime and cement improvement using spectral induced polarization and bender element techniques

Spectral induced polarization(SIP)and bender element(BE)techniques show a high sensitivity to particle size,particle distribution and content of generated hydration products,which essentially govern the efficiency of ground improvement.In this context,both SIP and BE were integrated on a column setup to monitor the processes of lime and cement stabilization.A 5 mmol/L Na2CO3 solution was injected into the sand-lime mixture to produce CaCO3 precipitation,while deionized water was injected into the sandcement mixture to induce the hydration of cement.The average diameters of the precipitated particles or clusters were calculated from the relaxation time,which was a significant parameter of SIP signals,via the Schwarz equation.Two pairs of BE were used to demonstrate the heterogeneity of the product precipitation,which was probably caused by the location of the inflow and outflow on the SIP-BE column.SIP and BE showed the capability of nondestructively monitoring the spatiotemporal chemical evolution processes,which could be helpful for engineering applications.

A comparison of single shot nanosecond and femtosecond polarization-resolved laser-induced breakdown spectroscopy of Al

Aluminum samples have been analyzed by femtosecond polarization-resolved laser-induced breakdown spectroscopy （fs-PRLIBS）. We compare the obtained spectra with those obtained from nanosecond PRLIBS （ns-PRLIBS）. The main specific features of fs-PRLIBS are that a lower plasma temperature leads to a low level of continuum and no species are detected from the ambient gas. Furthermore, signals obtained by fs-PRLIBS show a higher stability than those of ns-PRLIBS. However, more elements are detected in the ns-PRLIBS spectra.

The high dependence of polarization resolved laser-induced breakdown spectroscopy on experimental conditions

It is shown that the continuum emission produced by an A1 alloy ablated by femtosecond laser pulses is much more polarized than the characteristic lines of elements. A Glan-Thomson polarizer is used in the laser-induced breakdown spectroscopy experiment to investigate the polarization effect. The use of the polarizer at its minimal transmission increases the signal-to-noise ratio. The effects of angle of detection, focal position, and pulse energy on the signal-to- noise ratio are also studied.

Effect of thermally induced birefringence on high power picosecond azimuthal polarization Nd:YAG laser system

Pulse-burst 1064-nm picosecond azimuthal polarization beam amplification up to an average power of 16.32 W using side-pumped Nd: YAG amplifiers has been demonstrated. The maximum envelop energy as much as 16.32 mJ, corresponding to a power amplification factor of 299.5%. A simple criterion was defined to help estimate the amount of depolarization in Nd:YAG amplifier stages. The degree of depolarization of the beam was 7.1% and the beam quality was measured to be M2= 3.69. The reason for the azimuthal polarization depolarization and beam quality degradation were explained theoretically and experimentally during the amplification process.

The polarization characteristics of single shot nanosecond laser-induced breakdown spectroscopy of Al

The polarization-resolved laser-induced breakdown spectroscopy （PRLIBS） technique, which can significantly reduce the polarized emission from laser plasma by placing a polarizer in front of the detector, is a powerful tool to improve the line-to-continuum ratio in LIBS applications. It is shown that the continuum emission from the plasma produced through ablating an Al sample by nanosecond laser pulses is much more polarized than the discrete line emission with the singlepulse PRLIBS technique. The effects of laser fluence and detection angle on the Al polarization spectrum are systematically explored experimentally. The calculated result of the polarization spectrum as a function of laser fluence shows that it is in agreement with the experimental observations.

MEASURING PRECISION OF INDUCED POLARIZATION METHOD

ＭＥＡＳＵＲＩＮＧＰＲＥＣＩＳＩＯＮＯＦＩＮＤＵＣＥＤＰＯＬＡＲＩＺＡＴＩＯＮＭＥＴＨＯＤ￥Ｈｅ，Ｊｉｓｈａｎ（ＣｅｎｔｒａｌＳｏｕｔｈＵｎｉｖｅｒｓｉｔｙｏｆＴｅｃｈｎｏｌｏｇｙ，Ｃｈａｎｇｓｈａ４１００８３）Ａｂｓｔｒａｃｔ：Ｏｎｔｈｅｐｒｅｍｉ...

Gamma-Ray Spectrometry and Induced Polarization Studies for El Atshan-II Uranium Prospect Area, Central Eastern Desert, Egypt

Gamma-ray spectrometry and induced polarization (IP) studies were carried out to determine the radioactive anomalous zones and to follow their lateral and vertical extensions in El Atshan-II uranium prospect area, central Eastern Desert, Egypt. This area and its surroundings are covered by different Precambrian basement rocks, which intruded by younger bostonite rock, andesite dykes and carbonate veins. Data of the gamma-ray spectrometry have been analyzed qualitatively and quantitatively by applying specific interpretation techniques. These data revealed a wide radioactivity range oscillating from 15.0 to 2362.0 Ur, 0.5 to 307.2 ppm, 0.1 to 55.1 ppm and 0.3 to 22.0% for the total count (Tc), equivalent uranium (eU), equivalent thorium (eTh) and potassium (K), respectively. The constructed radioelement concentration maps and eU-composite image of the study area showed that the anomalously high radioactivity levels are mainly associated with outcrops of the bostonite rock. The induced polarization data were mathematically inverted to produce the true resistivity and chargeability values of cross-sections below the surveyed lines traverse in the area. The resistivity values are varied both vertically and horizontally from 7.83 to more than 1042.0 ohm·m, while the chargeability values are ranged from 0.195 to more than 204.0 mV/V, suggesting variation of the rocks facies and mineralizations. Integration of the resistivity and chargeability data indicates the presence of some mineralized zones, mainly associated with the bostonite rock, with depths varied from the near-surface to more than 70 m. Therefore, a core drilling is recommended at some stations along three selected profiles to a depth of 70 - 100 m to test the depth, structural model and grade of mineralization in the area.

Study on multiple induced polarization parameters in groundwater exploration in Bashang poverty alleviation area of Heibei Province,China

The study examines a water exploration and poverty alleviation project in Guyuan county.The study analyzes correlations between aquifers and multiple induced polarization(IP)parameters,including resistivity,polarizability,deviation,half decay time,water-bearing factors,and Kc,a new parameter refined in this study.Based on the study,the well was placed accurately,and its maximum water inflow reached 30 m3/h.Kc value highlights the rate of change at early stages of IP secondary field.Kc value served as a quick indicator in this groundwater prospecting and is validated in practice.Progress has been made in finding new parameters in exploring water with IP method.Thanks to the project,local people have access to water and poverty alleviation has scored some achievements.

Current-induced nonequilibrium spin polarization in semiconductor-nanowire/s-wave superconductor junctions with strong spin–orbit coupling

We have studied the characteristics of current-induced nonequilibrium spin polarization in semiconductor-nanowire/swave superconductor junctions with strong spin–orbit coupling. It was found that within some parameter regions the magnitude of the current-induced nonequilibrium spin polarization density in such structures will increase（or decrease） with the decrease（or increase） of the charge current density, in contrast to that found in normal spin–orbit coupled semiconductor structures. It was also found that the unusual characteristics of the current-induced nonequilibrium spin polarization in such structures can be well explained by the effect of the Andreev reflection.

Polarization-Independent Metamaterial Sensing Based on Electromagnetically Induced Transparency

We propose a metamaterial structure that can achieve electromagnetically induced transparency and polarization—independent of the incident wave. The structure consists of a regular octagonal frame and four L-shaped metal wires arranged periodically. There is a strong transparent window at 4.28 GHz. Our calculation results are in good agreement with the simulation results. When changing the excitation polarization of the incident wave, the transmission spectrum remains stable. Furthermore, when we adjust the permittivity of the medium in front of the metamaterial, the frequency of the transmission valley shifts linearly with the change in permittivity. This structure can be independent of the polarization of the incident wave and has potential inspiration in fields such as sensing.

Theoretical study of the intensity of chemically induce dynamic electron polarization of radical-triplet pairs

Considering the interaction between excited triplet molecule and doublet radical, based on the second-order perturbation theory and the motion equation of density matrix, the polarization intensity of RTPM were theoretically calculated with the overpopulated doublet spin states and quartet spin states of radical-triplet pairs as initial conditions respectively. The results of calculation indicate that the net emissive polarization and the net absorptive polarization on the radical result from the zero-field-splitting (zfs) and the multiplet A/E and E/A polarization result from hyperfine (hf) interactions of the triplet molecule. The hyperfine related A+A/E or E+E/A CIDEP on the radical were the overpopulation of the net absorptive or emissive polarization and multiplet A/E or E/A polarization..

THE EFFECT OF POLAR ADDITIVES ON THE γ RADIATION INDUCED POLYMERIZATION OF STYRENE

The γ induced polymerization of styrene in the presence of polar additives such as tributylphosphate, triethyl amine and ethanol was studied at dose rate of 5.0×10^(17) eV/ml. min. The re-sult shows that radiation induced polymerization of styrene was sensitized by the three kinds ofadditives at the approximate same rate and the experimental results were in agreement with thetheoretical calculation of WAS equation. The cause of sensitization is due to the proton transfer.

Laser Intensity Variation in Amplitude and Phase Induced by Elliptically Polarized Feedback

The laser output characteristics under elliptically polarized optical feedback effect are studied. Elliptically polarized light is generated by wave plate placed in the feedback cavity. By analyzing the amplitude and phase of the laser output in the orthogonal direction, some new phenomena are firstly discovered and explained theoretically.Elliptically polarized feedback light is amplified in the gain medium in the resonator, and the direction perpendicular to the original polarization direction is easiest to oscillate. The laser intensity variation in amplitude and phase are related to the amplified mode and the anisotropy of external cavity. The theoretical analysis and experimental results agree well. Because the output characteristic of the laser has a relationship with the anisotropy of the external cavity, the phenomenon also provides a method for measuring birefringence.

Polarization properties in a prism laser gyro with mechanical dither bias

Theoretical analysis and experimental research on the polarization properties of output light in gyro are carried out to investigate the phenomenon that the amplitude of an output voltage signal is modulated by dither bias in laser gyros consisting of totally reflecting prisms. Taking the effect of prism stress birefringence into account, an analytical formula of the output light intensity in the gyro and the relationship between the polarization parameter and the amplitude modulation of the output signal are obtained and discussed. For the first time, the polarized power value of the output light is adopted as a basis to estimate the output signal amplitude fading extent of laser gyros. Experimental results demonstrate that when the value of polarized power of output light is below 25.5% of that in ideal static case, the standard error is over 0.0337 dBm, and the displacement extent of the prism is higher than 53% of the radius of the beam waist in the gyro cavity, the amplitude modulation extent of gyro output signal can reach up to 16%, which badly influences the measurement accuracy of the laser gyro. Using this polarized power detecting measurement method can repair the gyro immediately during its fabrication process, improve the testing and production efficiency and shorten the product development cycle.

Linear polarization output performance of Nd:YAG laser at 946 nm considering the energy-transfer upconversion

A theoretical model of quasi-three-level laser system is developed, in which both the thermally induced depolarization loss and the effect of energy-transfer upconversion are taken into account. Based on the theoretical investigation of the influences of output transmission and incident pump power on thermally induced depolarization loss, the output performance of 946 nm linearly polarized Nd：YAG laser is experimentally studied. By optimizing the transmission of output coupler, a 946 nm linearly polarized continuous-wave single-transverse-mode laser with an output power of 4.2 W and an optical-optical conversion efficiency of 16.8% is obtained, and the measured beam quality factors are M2 = 1.13 and My2 = 1.21. The theoretical prediction is in good agreement with the experimental result.

Polarization and Breakdown Analysis of AlGaN Channel HEMTs with AlN Buffer

We have demonstrated the first carrier density model for AlGaN channel with AlN buffer using spontaneous and piezoelectric polarization comparison with experimental and theoretical results. From the results we proved that the formation of 2DEG in undoped structure relied both on spontaneous and piezoelectric polarization. The electron distribution of Al concentration (0 < x < 0.5) was measured for both AlGaN channel and barrier. Barrier thickness assumed between 20 and 25 nm for validating the experimental results. The carrier concentration was observed at the specific interface of the N- and Ga-face by assuming x1, x2 = 0. The model results are verified with previously reported experimental data.