An approach for determination of lateral limit angle in kinematic planar sliding analysis for rock slopes

Planar sliding is one of the frequently observed types of failure in rock slopes.Kinematic analysis is a classic and widely used method to examine the potential failure modes in rock masses.The accuracy of planar sliding kinematic analysis is significantly influenced by the value assigned to the lateral limit angleγlim.However,the assignment ofγlim is currently used generally based on an empirical criterion.This study aims to propose an approach for determining the value ofγlim in deterministic and probabilistic kinematic planar sliding analysis.A new perspective is presented to reveal thatγlim essentially influences the probability of forming a potential planar sliding block.The procedure to calculate this probability is introduced using the block theory method.It is found that the probability is correlated with the number of discontinuity sets presented in rock masses.Thus,different values ofγlim for rock masses with different sets of discontinuities are recommended in both probabilistic and deterministic planar sliding kinematic analyses;whereas a fixed value ofγlim is commonly assigned to different types of rock masses in traditional method.Finally,an engineering case was used to compare the proposed and traditional kinematic analysis methods.The error rates of the traditional method vary from 45%to 119%,while that of the proposed method ranges between 1%and 17%.Therefore,it is likely that the proposed method is superior to the traditional one.

Coupled DEM-FDM analyses of the effects of falling rock’s shape and impact angle on response of granular cushion and rock shed

Rock shed is an effective protection measure against rockfall.To investigate the influences of falling rock’s shape and impact angle on the impact effect of the cushioned rock shed,a modeling approach for a rock shed with a cushion layer using PFC-FLAC.The granular cushion is modeled as an aggregate of discrete non-cohesion particles,while the concrete plate and the beam are modeled as zones.The falling rock with different sphericities and impact angles is modeled as a rigid assembly.The numerical model is validated by comparing the simulation results with experimental and numerical results from previous literature.This model is applied to analyze the effects of rock shape and impact angle on the dynamic interaction effects between falling rock and cushioned rock shed,including the impact force,transmitted bottom force,penetration depth,and plate deflection.The numerical results show that the variation in the falling rock’s shape has different effects on the falling rock with different impact angles.These findings could support rock shed design by revealing the limitations of the assumptions in the past research,which may result in unsafe rock sheds for some rockfall cases.

The Application and Effect Evaluation of Corpus Linguistics in English Teaching

This paper explores the application and effect evaluation of corpus linguistics in English teaching.It first introduces the basic concepts and development history of corpus linguistics,then analyzes its connection with language teaching theories,discussing the advantages and challenges of using corpora in language teaching.Next,it delves into the methods and technologies for building and utilizing corpora,as well as their role in developing teaching resources.Lastly,within the framework and methods of teaching effect evaluation,specific application cases of corpus linguistics in teaching design are analyzed,and their effects are assessed.Recommendations for teaching improvement and future development directions are also proposed.

Mechanical analysis of the femoral neck dynamic intersection system with different nail angles and clinical applications

BACKGROUND The femoral neck dynamic intersection system(FNS)is mechanically more stable than other internal fixation techniques.Current studies have confirmed that the structural design of FNS has good biomechanical properties in European and American populations.However,whether the suitability of the FNS's 130°main nail angle design for Asian populations has been thoroughly investigated remains unclear.AIM To compare the biomechanical stability differences among different main nail angles of the FNS in the treatment of femoral neck fractures in Asian populations.METHODS Computed tomography data of the femur of healthy adult male volunteers were imported into Mimics software to create a three-dimensional model of the femur.The model was adapted to the curve using Geomagic software and imported into Solidworks software to construct the Pauwels I femoral neck fracture model and design the FNS internal fixation model using different main nail angles.Afterward,the models were assembled with the FNS fracture model and meshed using the preprocessing Hypermesh software.Subsequently,they were imported into Abaqus software to analyze and evaluate the biomechanical effects of different angles of the FNS main nail on the treatment of femoral neck fractures.RESULTS The peak displacement of the proximal femur under different angles of FNS fixation under stress was 7.446 millimeters in the 120°group and 7.416 millimeters in the 125°group;in the 130°,135°,and 140°FNS fixation groups,the peak displacement was 7.324 millimeters,8.138 millimeters,and 8.246 millimeters,respectively.In the 120°and 125°FNS fixation groups,the maximum stresses were concentrated at the main nail and the anti-rotation screw,which intersected the fracture line of the femur neck,resulting in peak stresses of 200.7 MPa and 138.8 MPa,respectively.Peak stresses of 208.8 MPa,219.8 MPa,and 239.3 MPa were observed on the angular locking plate distal to the locking screw in the 130°,135°,and 140°fixation groups.CONCLUSION FNS has significant stress distribution properties,a minimal proximal femoral displacement,and an optimal stability for treating femoral neck fractures in Asian populations when performed with a 130°main nail angle.

A Brief Analysis of Discrimination in Language Classroom——from the Perspective of Sociolinguistics

It is widely acknowledged that sociolinguistics is the study of language in certain context concerned with our society.Sociolinguistics and linguistics are intrinsically related to each other,but there has been difference as well.Linguistics research deals with language system itself,which belongs to the micro level on the one hand;many phenomena reflect discrimination in language classroom,these discrimination are caused by social factors to a certain degree.This paper makes a brief analysis of discrimination in language classroom from the perspective of sociolinguistics,which deals with many issues such as depiction of language discrimination、analysis of phenomenon and accordinglysolved measures.

Critical Discourse Analysis Based on Halliday’s Systemic Functional Linguistics: Taking The Economist’s First Commentation on the End of China’s Zero-COVID Policy as an Example

Based on Halliday’s systemic functional grammar,especially the ideational function,this research aims at disclosing the hidden ideologies and values of the seemingly objective news reports on China’s COVID-19 policies in The Economist.Transitivity,voice,and nominalization are the major analytical subjects.After China lifted the zero-COVID policy,western media began criticizing China’s lack of data sharing,with some misinformation and misleading reports.The denouncement of inertness and reluctance to fight against the pandemic disclaim the Chinese government’s efforts and depreciate China’s image.China is portrayed as the villain and destroyer of people’s health worldwide.Meanwhile,they also hold a hesitant attitude toward China’s diplomacy.The re-engaging with foreign countries and travel restrictions have been described as imprudent and rushed actions.They also consider China as the fuse of contradiction in the United Nations.What is overt is their view of breaking up China.

A Corpus-based Analysis of Keywords in Chinese Government Work Reports and State of the Union from the Perspective of Political Linguistics

This study compared and analyzed the features of keywords and their collocations in corpora:Chinese Government Work Reports and State of the Union(USA).A further comparison and analysis of the collocations of“develop”and“improve”was then conducted from the perspective of political linguistics.Results suggested that China and the United States have their own emphasis of government work.It was also indicated that“we”and“will”are both high-frequency keywords and combinations of“develop”and“improve”,which shows that both countries give the highest priority to narrowing the distance between the government and the public.

The Discourse Analysis of Ecology from the Perspective of Systemic Functional Linguistics

In recent decades, ecological problems are becoming more and more serious, which are focused worldwide. ＂Eco-[inguistics＂ （EL） also called ＂Ecology of Language＂ emerges in the situation that scholars try their best to solve the problems in linguistics. As an emerging interdisciplinary area of ecology and linguistics, eco-linguistics aims at analyzing the ecological phenomenon in language, exploring the relation between language and environment, and looking for the variety of internal patterns of language. At present, scholars at home have made a lot of achievements with the tendency from theoretical studies to practical studies. On the theoretical framework of eco-linguistics and the transitivity method of Systemic Functional Linguistics（SFL）, by analyzing two texts excerpted from BBC news reports which involve two kinds of animals, this article tries to explore the relation between human and animals and our attitudes toward different animals, analyze the ecological elements and hidden non-ecological features in the discourses, reveal the essential reasons for ecological disruption---inherent human ideology, interpret the influences on nature. We expect that people pay more attention to the issues of environment protection, change anthropocentrism to ecocentrism which builds the harmonious relation between human and nature.

The Analysis of Critical Discourse From the Perspective of Systemic Functional Linguistics

Critical discourse analysis, with its roots in the critical linguistics of East Anglia, is closely connected with systemic func- tional linguistics. This paper focuses on the relationship between systemic functional linguistics and critical discourse analysis, and illus-trates the future trend and significance of research on critical discourse analysis. Critical discourse analysis is increasingly becoming an a-cademic focus in linguistic field, its combination with other subjects contributes a lot to the social progress.

A Discourse Analysis from the Perspective of Textual Metafuction in Functional Linguistics

This essay excerpts an academic lecture on psychology from the listening part of TOEFL. Through respective analyses on the facets of thematic progression patterns and lexical sense relation, some main findings can be drawn. First, his text follows a typical Situation-Problem-Solution-Evaluation pattern. Also, this text applies various lexical sense relations and thematic progression patterns. Eventually, all make each paragraph and the whole text coherent.

Effect of Sweptback Angle of a Delta Wing on Surface Pressure Distribution at Supersonic Mach Numbers

The purpose of this work is to shed light on the effect of the pivot position on the surface pressure distribution over a 3D wing in different flight conditions.The study is intended to support the design and development of aerospace vehicles where stability analysis,performance optimization,and aircraft design are of primary importance.The following parameters are considered:Mach numbers(M)of 1.3,1.8,2.3,2.8,3.3,and 3.8,angle of incidence(θ)in the range from 5°to 25°,pivot position from h=0.2 to 1.The results of the CFD numerical simulations match available analytical data,thereby providing evidence for the reliability of the used approach.The findings provide valuable insights into the relationship between the surface pressure distribution,the Mach number and the angle of incidence.

Exploration on the Optimization Strategy for the Layup of Composite Material Pressure Vessels Based on Advanced Algorithms

This study aims to explore the influence of the laying angle on the pressure shell structure made of composite materials under the condition of a fixed shape. By using a composite material composed of a mixture of T800 carbon fiber and AG80 epoxy resin to design pressure vessels, this material combination can significantly improve the interlaminar shear strength and heat resistance. The article elaborates on the basic concepts and failure criteria of composite materials, such as the maximum stress criterion, the maximum strain criterion, the Tsai-Hill criterion, etc. With the help of the APDL parametric modeling language, the arc-shaped, parabolic, elliptical, and fitting curve-shaped pressure vessel models are accurately constructed, and the material property settings and mesh division are completed. Subsequently, APDL is used for static analysis, and the genetic algorithm toolbox built into Matlab is combined to carry out optimization calculations to determine the optimal laying angle. The research results show that the equivalent stress corresponding to the optimal laying angle of the arc-shaped pressure vessel is 5.3685e+08 Pa, the elliptical one is 5.1969e+08 Pa, the parabolic one is 5.8692e+08 Pa, and the fitting curve-shaped one is 5.36862e+08 Pa. Among them, the stress distribution of the fitting curve-shaped pressure vessel is relatively more uniform, with a deformation of 0.568E−03 m, a minimum equivalent stress value of 0.261E+09 Pa, a maximum equivalent stress value of 0.537E+09 Pa, and a ratio of 0.48, which conforms to the equivalent stress criterion. In addition, the fitting curve of this model can adapt to various models and has higher practical value. However, the stress distribution of the elliptical and parabolic pressure vessels is uneven, and their applicability is poor. In the future, further exploration can be conducted on the application of the fitting curve model in composite materials to optimize the design of pressure vessels. This study provides important theoretical support and practical guidance for the design of composite material pressure vessels.

The Topology Optimization of Oil Cylinder Mounting

The method of the structural topology optimization is often used to design machine in the early stage of the mechanical design.And the mechanical structures use the topology design to produce a new still and lightweight part with the different loading.A new structure is created through overlapping these new optimized structure.

Computational Analysis of Surface Pressure Distribution over a 2D Wedge in the Supersonic and Hypersonic Flow Regimes

The complex fluid-dynamic instabilities and shock waves occurring along the surface of a two-dimensional wedge at high values of the Mach number are studied here through numerical solution of the governing equations.Moreover,a regression model is implemented to determine the pressure distribution for various Mach numbers and angles of incidence.The Mach number spans the interval from 1.5 to 12.The wedge angles(θ)are from 5°to 25°.The pressure ratio(P2/P1)is reported at various locations(x/L)along the 2D wedge.The results of the numerical simulations are compared with the regression model showing good agreement.

A Meta-Analysis: Safety and Efficacy of Phacoemulsification with Goniosynechialysis versus Trabeculectomy for Acute Angle Closure Glaucoma in China

Aim: The aim is to evaluate the safety and efficacy of phacoemulsification with goniosynechialysis versus trabeculectomy in the treatment of acute angle closure glaucoma (AACG) systematically. Methods: From January 1, 2000 to August 31, 2022, we searched PubMed, Science Citation Index Database, China National Knowledge Infrastructure, and Wanfang Database for pertinent material about the treatment of AACG with various operations. The imported literature was carefully vetted using the inclusion and exclusion criteria, assessed for quality, and the raw data were retrieved and integrated into EndNoteX9. For the meta-analysis, STATA 16.0 and RevMan 5.3 were used as the tools. Results: The meta-analysis includes 20 clinical investigations in all, involving 1463 eyes. The quality of the literature was rated as excellent and the data homogeneity among the studies was excellent based on the various study types that were included in the literature. According to a meta-analysis, phacoemulsification with goniosynechialysis is superior to trabeculectomy for treating acute angle-closure glaucoma because it results in improved postoperative visual acuity, lower intraocular pressure, a broader anterior chamber depth, and fewer complications. Conclusion: If conditions allow, phacoemulsification in conjunction with goniosynechialysis performs better than trabeculectomy in terms of visual acuity, intraocular pressure, anterior chamber depth, and comorbidities.

A Meta-Analysis: Safety and Efficacy of Phacoemulsification with Goniosynechialysis versus Trabeculectomy for Acute Angle Closure Glaucoma in China

Aim: The aim is to evaluate the safety and efficacy of phacoemulsification with goniosynechialysis versus trabeculectomy in the treatment of acute angle closure glaucoma (AACG) systematically. Methods: From January 1, 2000 to August 31, 2022, we searched PubMed, Science Citation Index Database, China National Knowledge Infrastructure, and Wanfang Database for pertinent material about the treatment of AACG with various operations. The imported literature was carefully vetted using the inclusion and exclusion criteria, assessed for quality, and the raw data were retrieved and integrated into EndNoteX9. For the meta-analysis, STATA 16.0 and RevMan 5.3 were used as the tools. Results: The meta-analysis includes 20 clinical investigations in all, involving 1463 eyes. The quality of the literature was rated as excellent and the data homogeneity among the studies was excellent based on the various study types that were included in the literature. According to a meta-analysis, phacoemulsification with goniosynechialysis is superior to trabeculectomy for treating acute angle-closure glaucoma because it results in improved postoperative visual acuity, lower intraocular pressure, a broader anterior chamber depth, and fewer complications. Conclusion: If conditions allow, phacoemulsification in conjunction with goniosynechialysis performs better than trabeculectomy in terms of visual acuity, intraocular pressure, anterior chamber depth, and comorbidities.

The Application of Systemic-Functional Linguistics in Discourse Analysis

Systemic-functional linguistics considers function and semantics as the basis of human language and communicative activity. In recent years, Systemic-functional linguistics has been applied in such areas as natural language processing, early language learning, language education, stylistics, foreign language teaching, translation and stylistics. It sheds new light on the further application of this linguistic theory in other fields.

Phacoemulsification versus combined phacotrabeculectomy in the treatment of primary angle-closure glaucoma with cataract: a Meta-analysis

AIM： To compare the efficacy and safety of phacoemulsification（Phaco） against combined phacotrabeculectomy（Phacotrabe） in primary angle-closure glaucoma（PACG） with coexisting cataract.·METHODS： By searching electronically the Pub Med,EMBASE, Scientific Citation Index and Cochrane Library published up from inception to January 2014, all randomized controlled trials that matched the predefined criteria were included. The quality of included trials was evaluated according to the guidelines developed by the cochrane collaboration. And the outcomes estimating efficacy and safety of two different surgical treatments were measured and synthesised by Rev Man 5.0.· RESULTS： Five randomized controlled trials were selected and included in Meta-analysis with a total of468 patients（468 eyes） with both PACG and cataract. We found that Phacotrabe had a greater intraocular pressure（IOP） lowing effect [preoperative IOP： weighted mean difference（WMD）=0.58, 95% confidence intervals（95% CI,-0.53 to 1.69）, P =0.31; postoperative IOP： WMD =1.37,95% CI（0.45 to 2.28）, P =0.003], a lower number of antiglaucoma medications [risk ratio（RR）=0.05, 95% CI（0.02 to 0.18）, P 〈0.00001] needed postoperatively and less serious damage of optic nerve [RR =0.48, 95% CI（0.21 to 1.07）, P =0.07], but a higher risk of complications[odds ratio（OR）=0.04, 95% CI（0.01 to 0.16）, P 〈0.00001]compared with Phaco. The rest studies indicated that there had no significantly difference between the two surgical methods for postoperative best-corrected visual acuity（BCVA） [WMD =-0.05, 95% CI（-0.14 to 0.05）, P =0.32] and loss of visual field [RR=1.06, 95% CI（0.61 to1.83）, P =0.83].·CONCLUSION： Phaco alone compared with Phacotrabe had a better effect in IOP reduction, whereas the securitydecline. Considering the number of sample size, our results remains to be further studied.

Fixed combination of latanoprost and timolol vs the individual components for primary open angle glaucoma and ocular hypertension:a systematic review and meta-analysis

AIM:To assess the effects of the fixed combination of0.005% latanoprost and 0.5% timolol(FCLT) vs their individual components for primary open angle glaucoma(POAG) and ocular hypertension(OHT).· METHODS:After searched PubMed, EMBASE, the Cochrane Library and SCI, all randomized controlled clinical trials(RCTs) and cross-over studies were included. The control groups were the monotherapy or the concomitant therapy of latanoprost and timolol. The outcomes were visual field defect, optic atrophy, mean intraocular pressure(IOP) and IOP fluctuation. The analysis was carried out in RevMan version 5.1 software.RESULTS:Thepost-interventionmeanIOPofFCLTwas significantly lower compared to timolol [mean difference(MD)-2.92, 95%CI-3.28 to-2.55, P 【0.00001] and latanoprost(MD-1.11, 95%CI-1.51 to-0.72, P 【0.00001). The postintervention IOP fluctuation was also significantly lower compared to timolol(MD-0.88, 95%CI-1.23 to-0.53, P 【0. 00001) and latanoprost( MD- 0. 63, 95 % CI- 1. 04to-0.22, P =0.002). The mean IOP was higher in FCLT morning dose group than the one in unfixed combination of 0.005% latanoprost and 0.5% timolol(UFCLT)(MD1.10, 95% CI 0.81 to 1.39, P 【0.00001). Otherwise, there was no difference between FCLT evening dose group and UFCLT(MD 0.34, 95% CI-0.01 to 0.69, P =0.06).There was no statistical difference for the incidence ofvisual field defect and optic atrophy between FCLT and the monotherapy of components.CONCLUSION:A better IOP lowering effect has been demonstrated for FCLT compared to the monotherapy of components. The IOP lowering effect was worse for FCLT morning dose and almost same for FCLT evening dose compared to the UFCLT. We need more long-term high quality RCTs to demonstrate the outcomes of visual field defect and optic atrophy.visual field defect and optic atrophy between FCLT and the monotherapy of components.CONCLUSION:A better IOP lowering effect has been demonstrated for FCLT compared to the monotherapy of components. The IOP lowering effect was worse for FCLT morning dose and almost same for FCLT evening dose compared to the UFCLT. We need more long-term high quality RCTs to demonstrate the outcomes of visual field defect and optic atrophy.

Stability analysis of the open-pit mine slope and the study on the incensement of the slope angle

Based on the exploration of the engineering geology and the rock mechan-ics testing, limit equilibrium analysis method was adopted to calculate the stability of the Huogeqi Copper Mine slope, the results show that the original slope angle is too con-servative and the slope have the potential of more preferable slope angle. In order to discuss the possibility of slope angle enhancement, sensitivity analysis of parameters related to limit state slope was made. Quantitatively determined angle value of the add-ing and the optimal slope angle was obtained. The study having performed showed that it is not only useful for the safety control of open-pit mine slope but also for the open-pit mine design for the similar geological condition.