Numerical analysis of crack generation within embankment built on expansive soil foundation

In order to analyze the initial cracking behavior of highway embankment in the regions of expansive soil, the changes in peaks of tensile stress and their location on top of the embankment for a typical highway embankment section were simulated by ABAQUS. The simulation results indicate that the matric suction was a concave distribution on top of the expansive soil foundation and that it induced differential deformation of foundation and embankment. The peaks of tensile stress on top of the embankment are not located at a fixed site, but gradually move towards the shoulder following the evaporation duration. When the evaporation intensity is larger, the peak of tensile stress on top of embankment increases at a faster rate following the evaporation duration,and its location is closer to the shoulder. The thicker expansive soil layer helps the peaks of tensile stress to reach the critical tensile stress quickly, but the embankment cannot crack when the expansive soil layer is no more than 1.5m after 30d soil surface evaporation; the higher the embankment, the smaller the peak of tensile stress occurring on top of the highway embankment, and its location will be further away from the shoulder. Therefore, a higher embankment constructed on a thinner expansive soil layer can reduce the crack generation within the highway embankment.

ANALYSIS OF GEOSYNTHETICS REINFORCED EMBANKMENT ON SOFT SOIL BY FEM

The reinforcement effects of geosynthetics in thick soft subsoil case and thin soft subsoil case are studied in this paper,and a Duncan Chang nonlinear numerical model based on the finite element method (FEM) is developed.Moreover,an important conclusion that the thickness of soft subsoil affects greatly the geotechnical behavior of geosynthetic reinforced embankments is drawn.A series of embankment built on soft subsoil is calculated using the FEM program.The results of the computer program,such as the lateral displacements,settlements,and stress level and shear stresses in the subsoil,are presented in great detail and the comparison of those results disposes clearly the huge discrepancy of reinforce benefit between the thick subsoil embankment and thin subsoil embankment.Reinforcement mechanism of geosynthetics is also discussed in this paper and several conclusions are reached.This paper also gives recommendations for design.

Stability analysis of cohesive soil embankment slope based on discrete element method

In order to study the safety factor and instability process of cohesive soil slope, the discrete element method(DEM) was applied. DEM software PFC2 D was used to simulate the triaxial test to study the influence of the particle micro parameters on the macroscopic characteristics of cohesive soil and calibrate the micro parameters of DEM model on this basis. Embankment slope stability analysis was carried out by strength reduction and gravity increase method, it is shown that the safety factor obtained by strength reduction method is more conservative, and the arc-shaped feature of the sliding surface under the gravity increase method is more obvious. Throughout the progressive failure process, the failure trends, maximum displacements, and velocity changes obtained by the two methods were consistent. When slope was destroyed, the upper part was cracked, the middle part was sheared, and the lower part was destroyed by extrusion. The conclusions of this paper can be applied to the safety factor calculation of cohesive soil slopes and the analysis of the instability process.

Probabilistic stability analysis of embankment slopes considering the spatial variability of soil properties and seismic randomness

The safety of embankments under seismic conditions is a primary concern for geotechnical engineering societies.The reliability analysis approach offers an effective tool to quantify the safety margin of geotechnical structures from a probabilistic perspective and has gained increasing popularity in geotechnical engineering.This study presents an approach for probabilistic stability analysis of embankment slopes under transient seepage considering both the spatial variability of soil parameters and seismic randomness.The spatial varying soil parameters are firstly characterized by the random field theory,where a large number of random field samples of the soil parameters can be readily generated.Then,the factor of safety(FS)of the embankment slope under seismic conditions corresponding to each random field sample is evaluated through performing seismic stability analysis based on the pseudo-static method.A hypothetical embankment example is adopted in this study for illustration,and the influences of shear strength parameters,seismic coefficient,and the external water level on the embankment slope failure probability are systematically investigated.Results show that the coefficient of variation of the friction angle and the horizontal scale of fluctuation have more significant effects on the embankment slope failure probability.Besides,the seismic coefficient also affects the embankment slope failure probability considerably.For a given external water level,the failure probability corresponding to the downstream slope of the embankment is larger than that in the upstream slope.

Semi-analytical solution for drained expansion analysis of a hollow cylinder of critical state soils

The expansion of a thick-walled hollow cylinder in soil is of non-self-similar nature that the stress/deformation paths are not the same for different soil material points.As a result,this problem cannot be solved by the common self-similar-based similarity techniques.This paper proposes a novel,exact solution for rigorous drained expansion analysis of a hollow cylinder of critical state soils.Considering stress-dependent elastic moduli of soils,new analytical stress and displacement solutions for the nonself-similar problem are developed taking the small strain assumption in the elastic zone.In the plastic zone,the cavity expansion response is formulated into a set of first-order partial differential equations(PDEs)with the combination use of Eulerian and Lagrangian descriptions,and a novel solution algorithm is developed to efficiently solve this complex boundary value problem.The solution is presented in a general form and thus can be useful for a wide range of soils.With the new solution,the non-self-similar nature induced by the finite outer boundary is clearly demonstrated and highlighted,which is found to be greatly different to the behaviour of cavity expansion in infinite soil mass.The present solution may serve as a benchmark for verifying the performance of advanced numerical techniques with critical state soil models and be used to capture the finite boundary effect for pressuremeter tests in small-sized calibration chambers.

Physico-Chemical Analysis of Soils Used for Pineapple Cultivation in the Sub-Prefectures of Maferinyah and Friguiagbé (Prefectures of Forécariah and Kindia) Republic of Guinea

Over the years, pineapple production in the Republic of Guinea has become less competitive in the West African sub-region, with a world ranking of 144th. It is therefore only natural to review certain parameters in order to improve this ranking. To do this, certain physico-chemical parameters of soil samples from Friguiagbé and Maferinyah (in the Kindia and Forécariah prefectures) were taken and analysed using the following techniques: Pipette de Robinson, Anne, Bray II, Kapen HICDVITZ, Mc. Lead (1982). The analytical results show that the soils at Friguiagbé in Kindia and Maferinyah in Forécariah are acidic, with pH values of 4.4 and 4.7 (fields I and II) and 4.8 and 4.7 (fields I and II) respectively. The soils have a silty-sandy texture. This study could therefore serve as a guide for the Ministry of Agriculture of the Republic of Guinea.

Accurate method based on data filtering for quantitative multi-element analysis of soils using CF-LIBS

To obtain more stable spectral data for accurate quantitative analysis of multi-element,especially for the large-area in-situ elements detection of soils, we propose a method for a multielement quantitative analysis of soils using calibration-free laser-induced breakdown spectroscopy(CF-LIBS) based on data filtering. In this study, we analyze a standard soil sample doped with two heavy metal elements, Cu and Cd, with a specific focus on the line of Cu I324.75 nm for filtering the experimental data of multiple sample sets. Pre-and post-data filtering,the relative standard deviation for Cu decreased from 30% to 10%, The limits of detection(LOD)values for Cu and Cd decreased by 5% and 4%, respectively. Through CF-LIBS, a quantitative analysis was conducted to determine the relative content of elements in soils. Using Cu as a reference, the concentration of Cd was accurately calculated. The results show that post-data filtering, the average relative error of the Cd decreases from 11% to 5%, indicating the effectiveness of data filtering in improving the accuracy of quantitative analysis. Moreover, the content of Si, Fe and other elements can be accurately calculated using this method. To further correct the calculation, the results for Cd was used to provide a more precise calculation. This approach is of great importance for the large-area in-situ heavy metals and trace elements detection in soil, as well as for rapid and accurate quantitative analysis.

Contribution of GIS to Soil Landscape Mapping by Multi-Criteria Analysis Using Weighting: The Case of the Square Degrees of M’Bahiakro (Centre) and Daloa (Centre-West) in Ivory Coast

As part of the drive to improve coffee and cocoa production in Ivory Coast, studies are carried out to identify soils that are favourable for these crops. It is therefore necessary to orientate soil investigations based on reliable criteria that best discriminate soil cover. With this in mind, this study is being carried out to help improve survey methods by mapping soil landscapes. It uses GIS and weighted multicriteria analysis. To do this, satellite images were processed and the geological map of the square degrees of M’Bahiakro and Daloa was reclassified. The results show that relief is the main factor in soil landscape differentiation, with respective weights of 0.58 and 0.67 for the forest and pre-forest zones. In contrast, the weight of geological formation in soil landscape differentiation remains low (0.05 for the forest zone and 0.07 for the pre-forest zone). The criteria used on the base of aggregation sum methods have made it possible to formulate soil landscape mapping prediction functions according to agro-ecological environments in the humid intertropical zone. This is essential for the orientation of soil survey work. Nevertheless, other comparative methods, such as the coding mapping method, could provide elements for discussion to validate the models.

Bibliometric analysis of the status and trend of biological soil crusts research from 1912 to 2023

Biological soil crusts(BSCs)play an important role in soil development and ecological function,and it is more important for quantitatively analyzing the processes and trends of BSCs to identify the advantages and disadvantages of BSCs research for the development and application of BSCs theory.Bibliometric analysis of 2,186 BSCs literatures from Web of Science showed an exponential growth trend,as China and the United States as the top 2 in terms of publication volume.High quality publications are mainly from European and American countries,such as the United States,Germany and Spain.The top 3 publishers are Journal of Arid Environments,Soil Biology&Biochemistry and Plant and Soil,and disciplines include ecology,environmental science,and soil science,etc..Research institutions mainly affiliate to the Chinese Academy of Sciences,United States Department of the Interior,United States Geological Survey,Hebrew University of Jerusalem,Consejo Superior de Investigaciones Cientificas,and Universidad Rey Juan Carlos.Authors mainly come from United States,Israel,Spain and China.Funds are mainly from the National Natural Science Foundation of China,Spanish Government,Chinese Academy of Sciences,and National Science Foundation of the United States.Biological soil crusts(biocrusts,cyanobacteria,lichens,moss crusts,bryophytes),drylands,climate change,photosynthesis and desert are high-frequency keywords.Future research will focus on the driving mechanisms of BSCs on global biogeochemical cycles,maintaining global biodiversity on important ecological processes,global C,N,and P cycles.The impact on biological invasion,sandstorms,and water balance,multifunctional and reciprocal mechanisms for maintaining the stability of desert and sandy ecosystems,and impact on the formulation of management policies for arid ecosystems,corresponding to global climate change,and the estimation of regional,local,and microscale distribution of BSCs based on machine deep learning modeling gradually focus on.The ecosystem service functions of BSCs,the soil and water conservation and soil stability mediated by BSCs in arid and semi-arid regions,and the excavation of stress resistant genes for BSCs will be emphasized.

A vector sum analysis method for stability evolution of expansive soil slope considering shear zone damage softening

Slope stability analysis is a classical mechanical problem in geotechnical engineering and engineering geology.It is of great significance to study the stability evolution of expansive soil slopes for engineering construction in expansive soil areas.Most of the existing studies evaluate the slope stability by analyzing the limit equilibrium state of the slope,and the analysis method for the stability evolution considering the damage softening of the shear zone is lacking.In this study,the large deformation shear mechanical behavior of expansive soil was investigated by ring shear test.The damage softening characteristic of expansive soil in the shear zone was analyzed,and a shear damage model reflecting the damage softening behavior of expansive soil was derived based on the damage theory.Finally,by skillfully combining the vector sum method and the shear damage model,an analysis method for the stability evolution of the expansive soil slope considering the shear zone damage softening was proposed.The results show that the shear zone subjected to large displacement shear deformation exhibits an obvious damage softening phenomenon.The damage variable equation based on the logistic function can be well used to describe the shear damage characteristics of expansive soil,and the proposed shear damage model is in good agreement with the ring shear test results.The vector sum method considering the damage softening behavior of the shear zone can be well applied to analyze the stability evolution characteristics of the expansive soil slope.The stability factor of the expansive soil slope decreases with the increase of shear displacement,showing an obvious progressive failure behavior.

High-strain dynamic model of large-diameter pipe piles with soil plug for vertical vibration analysis

A rigorous analytical model is developed for simulating the vibration behaviors of large-diameter openended pipe piles(OEPPs)and surrounding soil undergoing high-strain impact loading.To describe the soil behavior,the soil along pile shaft is divided into slip and nonslip zones and the base soil is modeled as a fictitious-soil pile(FSP)to account for the wave propagation in the soil.True soil properties are adopted and slippage at the pile-soil interface is considered,allowing realistic representation of largediameter OEPP mechanics.The developed model is validated by comparing with conventional models and finite element method(FEM).It is further used to successfully simulate and interpret the behaviors of a steel OEPP during the offshore field test.It is found that the variation in the vertical vibrations of shaft soil along radial direction is significant for large-diameter OEPPs,and the velocity amplitudes of the internal and external soil attenuate following different patterns.The shaft soil motion may not attenuate with depth due to the soil slippage,while the wave attenuation at base soil indicates an influence depth,with a faster attenuation rate than that in the pile.The findings from the current study should aid in simulating the vibration behaviors of large-diameter OEPP-soil system under high-strain dynamic loading.

Multicriteria Analysis by Codification for the Determination of Soil Landscape Units in Forest and Pre-Forest Zones of Cote D’Ivoire: The Case of the Square Degrees of M’Bahiakro and Daloa

The present study, carried out in the forest (Daloa) and pre-forest (M’Bahiakro) zones of Cote d’Ivoire, aims to determine soil landscape units using the coding method. Geological maps and satellite images (SRTM and Landsat) were used for this purpose. The methodological approach adopted consisted in producing maps of slope, geology, land use and topography using the codification method. These various maps, integrated into a GIS using the coding aggregation method, were used to generate soil landscape maps. Twenty-seven (27) soil landscapes have been identified for the pre-forest zone (M’Bahiakro), with a strong dominance of acid rock over a moderate relief under savannah, forest/degraded forest and crops/fallow. However, the forest zone (Daloa), with forty-one (41) soil landscapes identified over the entire zone, is characterized by a majority of mafic rocks on a medium altitude under forest/degraded forest, water and crops/fallow. The criteria used from the codification method (sum of aggregations) made it possible to predict the spatial distribution of soil map units according to agro-ecological environments in the humid intertropical zone. This is essential for the orientation and reinforcement of soil survey tools. However, a comparative evaluation of the different multicriteria analysis methods for coding and weighting soil landscape unit mapping would enable us to identify the most suitable and efficient method for drawing up base maps for soil surveys.

Visual Analysis of Remote Sensing Monitoring of Soil Salinization

Soil salinization seriously restricts the development of agricultural production,the sustainable use of land resources,and the stability of the ecological environment.In order to objectively reveal the research status of soil salinization,CiteSpace software was used to conduct data mining and quantitative analysis on research papers on soil salinization from 2008 to 2023 in China National Knowledge Infrastructure(CNKI)and Web of science databases.The data sources were transformed into visual graphs by reproducing clustering statistics from aspects such as publication volume,authors,keywords,and publishing institutions.In addition,this paper also combined the actual needs and cutting-edge hotspots in relevant research in China,and proposed and analyzed the limitations and future development trends of soil salinity monitoring research in China.This has important practical significance for comprehensively grasping the current research status of salinization,further clarifying and sorting out the research ideas of salinization monitoring,enriching the remote sensing monitoring methods of saline soil,and solving the actual problems of soil salinization in China.

Probabilistic analysis of embankment slope stability in frozen ground regions based on random finite element method

Prediction on the coupled thermal-hydraulic fields of embankment and cutting slopes is essential to the assessment on evolution of melting zone and natural permafrost table, which is usually a key factor for permafrost embankment design in frozen ground regions. The prediction may be further complicated due to the inherent uncertainties of material properties. Hence, stochastic analyses should be conducted. Firstly, Karhunen-Loeve expansion is applied to attain the random fields for hydraulic and thermal conductions. Next, the mixed-form modified Richards equation for mass transfer （i.e., mass equation） and the heat transport equation for heat transient flow in a variably saturated frozen soil are combined into one equation with temperature unknown. Furthermore, the finite element formulation for the coupled thermal-hydraulic fields is derived. Based on the random fields, the stochastic finite element analyses on stability of embankment are carried out. Numerical results show that stochastic analyses of embankment stability may provide a more rational picture for the distribution of factors of safety （FOS）, which is definitely useful for embankment design in frozen ground regions.

Probabilistic Analysis for Seismic Stability of Beach Earth Embankment

The current safety factor method for evaluating earth embankment stability is not very rational since the assessment of slope stability is really an uncertainty problem. In order to consider the random property of this problem, the probabilistic analysis is introduced herein. Finally, the stability of a real beach earth embankment is analysed by means of the suggested probabilitic approach. It may be seen that the results of analysis can represent the numerical assessment of the degree of seismic stability.

Fuzzy Probabilistic Analysis of Seismic Stability of Coastal Embankment

The stability of slope is affected by a number of factors, some of which have not only random property but also fuzzy characteristic. Therefore, the analysis of slope stability is really an uncertain problem. The customary safety factor does not in reality reflect stability scientifically, quantitatively and practically. In order to obtain more practical results, the slope stability is treated as a fuzzy random event for the evaluation of its fuzzy probability. Finally, the seismic stability of an existing coastal embankment is analyzed by means of the suggested fuzzy probabilistic method. It may be seen that the results of analysis can more fully represent the numerical assessment of the degree of slope seismic stability.

Numerical analysis of pile lateral behavior of pile supported embankment

A finite difference numerical method was adopted to evaluate the pile lateral behavior of pile supported embankment. A published case history was used to verify the proposed methodology. By simulating the case history, the determination of parameters needed were verified. Then three embankments constructed on different ground conditions with different soil-pile relative stiffnesses were analyzed to study pile lateral behaviors including pile deflection and bending moment. The results show that pile deflections and bending moments induced by soil lateral deformation and embankment vertical load are different for piles at different positions under the same embankment. The relative stiffness between pile and soil affected by the properties of different reinforcing piles such as concrete pile and deep mixing method pile exert important effects on the pile lateral behavior and the pile's failure modes. Consequently, it is necessary to consider the different piles lateral behaviors and possible failure modes at different positions and the different piles proprieties with different reinforcing methods in the embankment stability analysis.

Dynamic Risk Analysis of Permanent Deformation of Sea Embankment

For evaluation of the permanent deformation of a sea embankment under stochastic earthquake excitation, a robust dynamic risk analytical method is presented based on conventional permanent deformation analysis and stochastic seismic response analysis. This method can predict not only the mean value of maximum permanent deformation but also the reliability corresponding to different deformation control standards. The earthquake motion is modelled as a stationary Gaussian filtered white noise random process. The predicted average maximum horizontal permanent displacement is in agreement with the conventional result, Further studied are the reliability of permanent deformation due to stochastic wave details at one seismic motion level and the risk of permanent deformation due to stochastic seismic strength, i. e., the maximum acceleration in a long period. Therefore, it is possible to make the optimal design in terms of safety and economy according to the importance of a sea embankment. It is suggested that the improved stochastic seismic model that can catch the behavior of the non-stationary random process For sea embankments should be further studied in future.

Structural Types of Sea Embankment and Their Stability Analysis

In this paper based on investigation on the structural types of sea embankments in the southeast coastal area of China, as well as the related tidal stages, waves and strength of marine soils, the finite element method (FEM) calculations for seepage flow stability, including the overall stability against sliding and local stability of sloping surface under the action of tidal stage and waves are carried out. A comparison of the computational results of FEM for single circular slip, composite circular slip and geogrid reinforcement against sliding shows that for calculation of stability against sliding of marine soft soil foundation it is even more reasonable to use the composite circular slip. The stability of sloping type sea embankment against sliding is slightly better than that of the vertical face type; for the combination of three defences (wave, scour and seepage defences) the sea embankment structural type of a composite cross section with a platform should be a good one, but it still should be suitable to local conditions. For the local stability of riprap slope blocks and wall face loose masonry blocks, according to the analyses of wave-induced seepage flow fields, calculating formulas are given and they are verified by model test on block stability of breakwaters.

Finite element analysis on deformation of high embankment in heavy-haul railway subjected to freeze-thaw cycles

Finite element simulations are increasingly providing a versatile environment for this topic. In this study, a two-dimensional finite element analysis is conducted to predict the deformation of high embankment in Bazhun heavy-haul railway, China. A recently developed nonlinear softening-type constitutive model is utilized to model the be- havior of subgrade filling materials subjected to freeze-thaw cycles. For the convenience of practical application, the dynamic loading induced by a vehicle is treated as a quasi-static axle load. The deformation of this embankment with different moisture content under freeze-thaw cycles is compared. The results show that when subjected to the first freeze-thaw cycle, the embankment experienced significant deformation variations. Maximum deformation was usually achieved after the embankment with optimum moisture content experienced six freeze-thaw cycles, however, the em- bankment with moisre content of 8.0% and 9.5% deforms continuously even after experiencing almost ten freeze-thaw cycles. Overall, this study provides a simple nonlinear finite element approach for calculating the deformation of the embankment in changing climate conditions.