The suitability assessment on site selection for bottom seeding scallop culture based on analytic hierarchy process

Scallop culture is an important way of bottom-seeding marine ranching,which is of great significance to improve the current situation of fishery resources.However,there are some problems in site-selection evaluation of marine ranching,such as imperfect criteria system,complex structure,untargeted criteria quantification,etc.In addition,no site-selection evaluation method of bottom-seeding culture areas for scallops is available.Therefore,we established a hierarchy structure model according to the analytic hierarchy process(AHP)theory,in which social,physical,chemical,and biological environments are used as main criteria,and marine functional zonation,water depth,current,water temperature,salinity,substrate type,water quality,sediment quality,red tide,phytoplankton,and zooplankton are used as sub-criteria,on which a multi-parameter evaluation system is set up.Meanwhile,the dualism method,assignment method,and membership function method were used to quantify sub-criteria,and a quantitative evaluation for the entire criteria was added,including the evaluation and analysis of two types of unsuitable environmental situations.By overall consideration in scallop yield,quality,and marine ranching construction objectives,the weight of the main criteria could be determined.Five grades in the suitability corresponding to the evaluation result were divided,and the Python language was used to create an evaluation system for efficient calculation and intuitive presentation of the evaluation outcome.Eight marine cases were simulated based on existing survey data,and the results prove that the method is feasible for evaluating and analyzing the site selection of bottom-seeding culture areas for scallops under various environmental situations.The proposed evaluation method can be promoted for the site selection of bottom-seeding marine ranching.This study provided theoretical and methodological references for the site selection evaluation of other types of marine ranching.

A Quality Evaluation System for Dissertation Based on Fuzzy Analytic Hierarchy Process

A dissertation is a research report or scientific paper written by an author to obtain a certain degree. It reflects postgraduates’ research achievements and the educational quality of an institute, even a country. To construct an optimized quality evaluation system for postgraduate dissertation (QESPD), we summarized the influencing factors and invited 10 experienced specialists to rate and prioritize them based on fuzzy analytic hierarchy process. Four primary indicators (innovation, integrity, scientificity and normativity) and 16 sub-indicators were selected to form the evaluation system. The order of primary indicators by weight, was innovation (0.4269), scientificity (0.2807), integrity (0.1728) and normativity (0.1196). The top five sub-dimensions were theoretical originality, scientific value, data reliability, design rationality and evidence credibility. To demonstrate the effectiveness of the proposed system, a case study was performed. In the case study, it was demonstrated that the established two-index-hierarchy QESPD in this study was a more scientific and reasonable evaluation system worthy of promotion and application.

Analytic Hierarchy Process for Technological Risks in the Process of Innovative Drug Development in China

Objective To identify the critical risks in the process of innovative drug research and development,and to provide reference for improving the efficiency of innovative drug development and risk control in China.Methods Expert investigation and analytic hierarchy process were used to determine the weights of different risks.Results and Conclusion The research and analysis results showed that the risks at different stages of development had different effects on the success rate of drug development,among which the risk at the drug discovery stage influenced the most.In the drug discovery stage,inappropriate target selection had the greatest impact on the success rate of drug development.The lack of appropriate cell tissue or animal models had the greatest impact on the success rate of drug development from the discovery of a compound to the application for clinical trials.The difference in changes between nonclinical and clinical studies had the greatest impact on the success rate of drug development from early clinical studies to pivotal clinical studies.Incorrect dose selection had the greatest impact on the success rate of drug development from pivotal clinical studies to marketing authorization applications.The biggest impact from the marketing authorization application to the approval stage was inadequate communication with regulators.After investigating the weight of risk factors in the process of innovative drug development based on scientific methods,a new perspective for the risk control of new drug development and improving the research and development efficiency is provided.

Research on Detection of Food additives Based on Terahertz Spectroscopy and Analytic Hierarchy Process

Terahertz time-domain spectroscopy is a kind of far-infrared spectroscopy technology,and its spectrum reflects the internal properties of substances with rich physical and chemical information,so the use of terahertz waves can be used to qualitatively identify food additives containing nitrogen elements.Analytic hierarchy process(AHP)was originally used to solve evaluation-type problems,and this paper introduces it into the field of terahertz spectral qualitative analysis,proposes a terahertz time-domain spectral qualitative identification method combined with analytic hierarchy process,and verifies the feasibility of the method by taking four common food additives(xylitol,L-alanine,sorbic acid,and benzoic acid)and two illegal additives(melamine,and Sudan Red No.I)as the objects of study.Firstly,the collected terahertz time-domain spectral data were pre-processed and transformed into a data set consisting of peaks,peak positions,peak numbers and overall trends;then,the data were divided into comparison and test sets,and a qualitative additive identification model incorporating analytic hierarchy process was constructed and parameter optimisation was performed.The results showed that the qualitative identification accuracies of additives based on single factors,i.e.,overall trend,peak value,peak position,and peak number,were 80.23%,70.93%,67.44%,and 40.70%,respectively,whereas the identification accuracy of the analytic hierarchy process qualitative identification method based on multi-factors could be improved to 92.44%.In addition,the fuzzy characterisation of the absorption spectrum data was binarised in the data pre-processing stage and used as the base data for the overall trend,and the recognition accuracy was improved to 94.19%by combining the fuzzy characterisation method of such data with the hierarchical analysis qualitative recognition model.The results show that it is feasible to use terahertz technology to identify different varieties of additives,and this paper constructs a hierarchical analytical qualitative model with better effect,which provides a new means for food additives detection,and the method is simple in steps,with a small demand for samples,which is suitable for the rapid detection of small samples.

Assessment and Application of Beach Quality Based on Analytic Hierarchy Process in Yangkou Beach, Qingdao

The whole-beach quality assessment is the basis of building and preserving beautiful beaches.The beach quality assessment index system and assessment standard have been established based on the attributes of beaches(including the width,slope,landform,and types),sorting coefficient,and softness degree of surface sediment.The assessment weight of each index for quality evaluation was analyzed using the analytic hierarchy process,and comprehensive scores of selected beach profiles were calculated in accordance with the light assessment standard.A beach quality evaluation model based on index weight and scores was established in this paper.The factors of 12 profiles of Yangkou Beach in Qingdao City were surveyed to carry out a quality assessment,and the comprehensive scores of each profile were calculated in accordance with the evaluation model.The results showed that the quality of Yangkou Beach can be divided into four ratings:excellent,good,medium,and poor.The excellent-quality area includes a wide and flat dry beach zone and soft,flat,and clean intertidal and subtidal zones covered with well-sorted fine sand,and leisure sports,such as volleyball,running,and swimming,are suitable for tourists.The good-quality area features a slightly narrow and dry beach zone,moderately soft and uneven intertidal and subtidal zones covered with fine sand and a small tidal gully,and a small amount of foreign matter;leisure sports,such as walking and running,are suitable for tourists.This study recommends the building of fixed drainage ditches or underground culverts to reduce the tidal gully.The medium-quality area consisted of a narrow and dry beach zone,moderately soft and uneven intertidal and subtidal zones covered by poorly sorted medium sand,a tide ditch,and a small amount of foreign matter.In this area,walking is suitable for tourists.Sand should be supplemented in the intertidal zone.The poor-quality area contained a very narrow and dry beach zone covered with poor-sorted gravel,a very chaotic intertidal zone with a considerable amount of foreign matters,such as bricks and rocks,wide tidal ditches,and an uneven subtidal zone with some reefs;leisure sports are unsuitable here.Thus,foreign matter and reefs should be removed,and the dry beach zone should be supplemented with sand.Therefore,the beach quality assessment is a very useful tool for building beautiful beaches.

Application of GIS based analytical hierarchy process and multicriteria decision analysis methods to identify groundwater potential zones in Jedeb Watershed, Ethiopia

The hydrogeological situation of the study area requires the identification of groundwater potential.Remote sensing and satellite data have proven to be reliable tools for understanding various factors that affect groundwater occurrence and movement.This study employed weighted overlay analysis based on satellite imagery and secondary data to create a thematic map for characterizing groundwater potentials in the study area located within Abbay Basin,Ethiopia.Remote sensing(RS)and GIS-based Fuzzy-Analytical Hierarchy Process methods were utilized to classify groundwater potential(GWP)zones into five categories:Very good,good,moderate,poor,and very poor.The central and eastern parts of the study area were identified as having high(33.186%)and very high(2.351%)groundwater potentials,while the western part exhibited poor and very poor potential areas.The groundwater potential map delineated higher and moderate potentials,suitable for installing shallow and production bores.This research demonstrates the effectiveness of RS and GIS techniques for delineating groundwater potential zones,which can aid in the planning and management of groundwater resources.The research findings have the potential to contribute to the formulation of improved groundwater management programs in the study area.

The Research on the Impact Factors of the Comprehensive Evaluation of Communication Unit Camps Based on Analytic Hierarchy Process

Currently, the comprehensive assessment of the communication troops’ camp planning project is primarily qualitative, with limited quantitative evaluation. Drawing upon the relevant spirit of the Military Commission’s documents and leveraging the author’s own work experience in branch offices, this article thoroughly explores the factors influencing the comprehensive assessment of the project and proposes quantitative representation methods for these factors. Utilizing the Analytic Hierarchy Process (AHP), a hierarchical structure model and judgment matrix for the evaluation factors of the communication troops’ camp construction planning project are constructed, enabling the determination of the weightage of each factor. This provides a certain level of support and reference for the project approval and management by branch offices, while also offering valuable insights for the approval and management of camp planning and construction projects in other types of troops and battlefield projects.

Landfill Site Suitability Assessment Using Geographic Information System (GIS) and Analytic Hierarchy Process (AHP) in Butuan City, Philippines

Landfilling is one of the most effective and responsible ways to dispose of municipal solid waste(MSW).Identifying landfill sites,however,is a challenging and complex undertaking because it depends on social,environmental,technical,economic,and legal issues.This study aims to map the optimal sites that were environmentally suitable for locating a landfill site in Butuan City,Philippines.With reference to the policy requirements from DENR Section I,Landfill Site Identification Criteria and Screening Guidelines of National Solid Waste Management Commission,the integration of a Geographic Information System(GIS)model builder and Analytical Hierarchy Process(AHP)has been used in this study to address the aforementioned challenges related to the landfill site suitability analysis.Based on the generated sanitary landfill suitability map,results showed that Barangay Tungao(1131.42967 ha)and Florida(518.48 ha)were able to meet and consider the three(3)main components,namely economic,environmental,and physical criteria,and are highly suit­able as landfill site locations in Butuan City.It is recommended that there will conduct a geotechnical evaluation,involv­ing rigorous geological and hydrogeological assessment employing a combination of site investigation and laboratory techniques.In addition,additional specific social,ecological,climatic,and economic factors need to be considered(i.e.including impact on humans,flora,fauna,soil,water,air,climate,and landscape).

Shale Fracturability Graphic Template Based onMixed Analytic Hierar-chy Process andMutation Theory

Due to the depletion of conventional energy reserves,there has been a global shift towards non-conventional energy sources.Shale oil and gas have emerged as key alternatives.These resources have dense and heterogeneous reservoirs,which require hydraulic fracturing to extract.This process depends on identifying optimal fracturing layers,also known as‘sweet spots’.However,there is currently no uniform standard for locating these sweet spots.This paper presents a new model for evaluating fracturability that aims to address the current gap in the field.The model utilizes a hierarchical analysis approach and a mutation model,and is distinct in its use of original logging data to generate a fracturability evaluation map.Using this paper’s shale fracturing sweet spot evaluation method based on a two-step mutation model,four wells in different blocks of Fuling and Nanchuan Districts in China were validated,and the results showed that the proportion of high-yielding wells on the sweet spot line could reach 97.6%,while the proportion of low-producing wells was only 78.67%.Meanwhile,the evaluation results of the model were compared with the microseismic data,and the matching results were consistent.

METHOD FOR BRIDGE BEARING CAPACITY ASSESSMENT BASED ON ANALYTIC HIERARCHY PROCESS

By analyzing the existing methods for the bridge bearing capacity assessment, an analytic hierarchy pro cess estimation model with a variable weight and fuzzy description is proposed based on the nondestructive infor mation. Considering the actual strength, the bearing capacity is first calculated from its design state, and then modified based on the detection information. The modification includes the section reduction and the structure deterioration. The section reduction involves the concrete section and the steel cross-section reduction. The structure deterioration is decided by six factors, i.e. , the concrete surface damage, the actual concrete strength, the steel corrosion electric potential, the chloride ion content, the carbonization depth, and the protective layer depth. The initial weight of each factor is calculated by the expert judgment matrix using an analytic hierarchy process. The consistency approximation and the error transfer theory are used. Then, the variable weight is in- troduced to expand the influences of factors in the worse state. Finally, an actual bridge is taken as an example to verify the proposed method. Results show that the estimated capacity agrees well with that of the load test, thus the method is objective and credible

A min-max optimization approach for weight determination in analytic hierarchy process

A min-max optimization method is proposed as a new approach to deal with the weight determination problem in the context of the analytic hierarchy process. The priority is obtained through minimizing the maximal absolute difference between the weight vector obtained from each column and the ideal weight vector. By transformation, the. constrained min- max optimization problem is converted to a linear programming problem, which can be solved using either the simplex method or the interior method. The Karush-Kuhn- Tucker condition is also analytically provided. These control thresholds provide a straightforward indication of inconsistency of the pairwise comparison matrix. Numerical computations for several case studies are conducted to compare the performance of the proposed method with three existing methods. This observation illustrates that the min-max method controls maximum deviation and gives more weight to non- dominate factors.

Construction of Value Models of Consumer Creation for Agricultural Products Based on the Analytic Hierarchy Process(AHP)

With the increased competition of modern economy and globalization,consumer creation which based on the analysis of consumer behavior was more and more attentioned and respected by business.Based on the meaning and characteristics of agricultural product consumer creation,index system of value model of agricultural product consumer creation was put forward through analytical hierarchy process（AHP）.The weights of the indicators and related indicators of impact on the value were analyzed,and value models of agricultural product consumer creation were constructed to provide ideas for development of agricultural product consumer market and research of consumer value.Consumer creation was constructed to provide ideas for development of agricultural product consumer market and research of consumer value.

Comparative Study on the Development Levels of Cold Chain Logistics for Agricultural Products between China and Developed Countries Based on Analytic Hierarchy Process

By introducing the analytic hierarchy process （AHP）, a model is constructed to compare the logistics development level of cold chain for agricultural products between China and other developed countries such as United States, Japan and Euro- pean. The paper makes a comparative study on the development levels of agricultural cold chain logistics in China and developed countries from the aspects of the level of cold chain logistics facilities and equipments, the degree of cold chain logistics market-oriented and the capacity of cold chain logistics, then determines the problems of cold chain logistics in China. With the experiences learning from developed countries, some countermeasures are proposed to resolve those problems of cold chain logistics for agricultural products development combining with the national conditions in China.

Hazard assessment of landslide disaster using information value method and analytical hierarchy process in highly tectonic Chamba region in bosom of Himalaya

The present study is focused on a comparative evaluation of landslide disaster using analytical hierarchy process and information value method for hazard assessment in highly tectonic Chamba region in bosom of Himalaya. During study, the information about the causative factors was generated and the landslide hazard zonation maps were delineated using Information Value Method(IV) and Analytical Hierarchy Process(AHP) using Arc GIS(ESRI). For this purpose, the study area was selected in a part of Ravi river catchment along one of the landslide prone Chamba to Bharmour road corridor of National Highway(NH^(-1)54 A) in Himachal Pradesh, India. A numeral landslide triggering geoenvironmental factors i.e. slope, aspect, relative relief, soil, curvature, land use and land cover(LULC), lithology, drainage density, and lineament density were selected for landslide hazard mapping based on landslide inventory. Landslide hazard zonation map was categorized namely "very high hazard, high hazard, medium hazard, low hazard, and very low hazard". The results from these two methods were validated using Area Under Curve(AUC) plots. It is found that hazard zonation map prepared using information value method and analytical hierarchy process methods possess the prediction rate of 78.87% and 75.42%, respectively. Hence, landslide hazardzonation map obtained using information value method is proposed to be more useful for the study area. These final hazard zonation maps can be used by various stakeholders like engineers and administrators for proper maintenance and smooth traffic flow between Chamba and Bharmour cities, which is the only route connecting these tourist places.

Landslide susceptibility assessment using the certainty factor and analytic hierarchy process

A new approach combining the certainty factor(CF) and analytic hierarchy process(AHP) methods was proposed to assess landslide susceptibility in the Ziyang district, which is situated in the Qin-Ba Mountain region, China. Landslide inventory data were collected based on field investigations and remote sensing interpretations. A total of 791 landslides were identified. A total of 633 landslides were randomly selected from this data setas the training set, and the remaining landslides were used for validation as the test set. Nine factors, including the slope angle, slope aspect, slope curvature, lithology, distance to faults, distance to streams, precipitation, road network intensity degree and land use were chosen as the landslide causal factors for further susceptibility assessment. The weight of each factor and its subclass were calculated by AHP and CF methods. Landslide susceptibility was compared between the bivariate statistical method and the proposed CF-AHP method. The results indicate that the distance to streams, distance to faults and lithology are the most dominant causal factors associated with landslides. The susceptibility zonation was categorized into five classes of landslide susceptibility, i.e., very high, high, moderate, low and very low level. Lastly, the relative operating characteristics(ROC) curve was used to validate the accuracy of the new approach, and the result showed a satisfactory prediction rate of 78.3%, compared to 69.2% obtained with the landslide susceptibility index method. The results indicate that the CF-AHP combined method is more appropriate for assessing the landslide susceptibility in this area.

Marginal optimization method to improve the inconsistent comparison matrix in the analytic hierarchy process

To improve the inconsistency in the analytic hierarchy process(AHP), a new method based on marginal optimization theory is proposed. During the improving process, this paper regards the reduction of consistency ratio(CR) as benefit, and the maximum modification compared to the original pairwise comparison matrix(PCM) as cost, then the improvement of consistency is transformed to a benefit/cost analysis problem. According to the maximal marginal effect principle, the elements of PCM are modified by a fixed increment(or decrement) step by step till the consistency ratio becomes acceptable, which can ensure minimum adjustment to the original PCM so that the decision makers’ judgment is preserved as much as possible. The correctness of the proposed method is proved mathematically by theorem. Firstly, the marginal benefit/cost ratio is calculated for each single element of the PCM when it has been modified by a fixed increment(or decrement).Then, modification to the element with the maximum marginal benefit/cost ratio is accepted. Next, the marginal benefit/cost ratio is calculated again upon the revised matrix, and followed by choosing the modification to the element with the maximum marginal benefit/cost ratio. The process of calculating marginal effect and choosing the best modified element is repeated for each revised matrix till acceptable consistency is reached, i.e., CR<0.1. Finally,illustrative examples show the proposed method is more effective and better in preserving the original comparison information than existing methods.

Integrated Assessment of Environmental and Economic Performance of Chemical Products Using Analytic Hierarchy Process Approach

With the increasing public consciousness on environmental issues, chemical products and process designs require simultaneous satisfaction and compromise of environmental and economical requirements. To fulfill the two conflicting while complementary objectives, a systematic approach for life cycle design of a chemical product is proposed in this article. Multiattribute decision-making is adopted in a trade-off consideration of both technical economical evaluation and environmental impacts assessment using the analytic hierarchy process （AHP） approach. On the basis of an evaluation of the relative importance of the criteria multicriteria decision making is performed. In this study, an AHP model is used to derive single a criteria score by analyzing the environmental impact and life cycle cost of a product, respectively. And a fluctuant weight analysis is put forth to calculate the integrated index of the product to enable products to be ranked or selected intuitionally and conveniently. The proposed AHP model has been applied to a case study, a comparative study on chamber cleaning with NF3 and C2F6. The resuits show that the protposed AHP model is Capable of providing a rational and relevant evaluation.

Relationship of public preferences and behavior in residential outdoor spaces using analytic hierarchy process and principal component analysis—a case study of Hangzhou City, China

This study examined public attitudes concerning the value of outdoor spaces which people use daily. Two successive analyses were performed based on data from common residents and college students in the city of Hangzhou, China. First, citizens registered various items constituting desirable values of residential outdoor spaces through a preliminary questionnaire. The result proposed three general attributes (functional, aesthetic and ecological) and ten specific qualities of residential outdoor spaces. An analytic hierarchy process (AHP) was applied to an interview survey in order to clarify the weights among these attributes and qualities. Second, principal factors were extracted from the ten specific qualities with principal component analysis (PCA) for both the common case and the campus case. In addition, the variations of respondents’ groups were classified with cluster analysis (CA) using the results of the PCA. The results of the AHP application found that the public prefers the functional attribute, rather than the aesthetic attribute. The latter is always viewed as the core value of open spaces in the eyes of architects and designers. Fur-thermore, comparisons of ten specific qualities showed that the public prefers the open spaces that can be utilized conveniently and easily for group activities, because such spaces keep an active lifestyle of neighborhood communication, which is also seen to protect human-regarding residential environments. Moreover, different groups of respondents diverge largely in terms of gender, age, behavior and preference.

Application of fuzzy analytic hierarchy process and neural network in power transformer risk assessment

In operation,risk arising from power transformer faults is of much uncertainty and complicacy.To timely and objectively control the risks,a transformer risk assessment method based on fuzzy analytic hierarchy process(FAHP) and artificial neural network(ANN) from the perspective of accuracy and quickness is proposed.An analytic hierarchy process model for the transformer risk assessment is built by analysis of the risk factors affecting the transformer risk level and the weight relation of each risk factor in transformer risk calculation is analyzed by application of fuzzy consistency judgment matrix;with utilization of adaptive ability and nonlinear mapping ability of the ANN,the risk factors with large weights are used as input of neutral network,and thus intelligent quantitative assessment of transformer risk is realized.The simulation result shows that the proposed method increases the speed and accuracy of the risk assessment and can provide feasible decision basis for the transformer risk management and maintenance decisions.

Application of an analytic hierarchy process to hydrocarbon accumulation coefficient estimation

The hydrocarbon accumulation coefficient is a key parameter in resources evaluation by genetic techniques. Methods of obtaining its value scientifically have always been an important factor influencing evaluation credibility. In this paper, the hydrocarbon accumulation system is evaluated quantitatively by establishing a hierarchy structure model based on an analytical hierarchy process. The hydrocarbon accumulation system of a higher exploration degree is selected as a calibration area and its hydrocarbon accumulation coefficient can be calculated using methods of hydrocarbon generation potential and reservoir-scale sequence. The hydrocarbon accumulation coefficient of a petroleum accumulation system can be gained by analogy of reservoir forming comprehensive evaluation results with the calibration area. The hydrocarbon accumulation coefficient of each petroleum accumulation system in the upper reservoir-forming combination of the Liaohe Western Sag can be obtained with this method. Practice shows that using the analytical hierarchy process to quantitatively evaluate the hydrocarbon accumulation system and then quantitatively predict the hydrocarbon accumulation coefficient decreases the influence of human factors in resources evaluation, and makes the resources assessment more objective and closer to the actual geological condition.