Method of analyzing vibration characteristics of armature system of hermetically sealed electromagnetic relay

Published research is minimal on vibration characteristics of hermetically sealed electromagnetic relay (EMR) ex- posed to mechanical environment. The vibration characteristics of armature system, link contact system with electromagnetic system will cause EMR malfunction. The nonlinear dynamics model of armature systems was studied by considering electro- magnetic attraction force and opposite mechanical force in this paper. Angular displacements of armature under different sinu- soidal vibration conditions are solved in order to obtain the failure mode result from armature system. Vibration tests showed the presented analyzing method is suitable for EMR. The conclusions are instructive for increasing vibration resistance of armature systems of EMR, and are significant for reliability design of switch apparatus.

A Comparison between Neutron Activation Analysis and X-Ray Fluorescence Methods in Analyzing the Granite Samples

This study focused on the performance of where elements analysing techniques were used to detect the elements in granite stones. These techniques are NAA （neutron activation analysis） and XRF （X-ray fluorescence）. They were applied to detect the elements in samples which had been chosen from different areas of Pulua Penang in Malaysia collected by geophysics group which helped to describe and identify the elements found in the granite stone that were used in the study procedures to control the analytical results. The integration of both methods has enabled the researcher to determine 40 elements in the samples. The numbers of elements detected by XRF analysis method are 12 elements （Ar, K, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu and Zn）; while, the elements detected by NAA method have three folds of elements with XRF analysis method were 35 elements （Na, AI, Si, K, Ca, Sc,Ti, Mn, Fe, Co, Ga, Ce, As, Br, Rb, Zr, Sb, I, Cs, Ba, La, Nd, Sm, Eu,Tb, Dy, Yb, Lu, Hf, Ta, W, Au, Pa and Np）. Seven common elements were detected in both techniques： K, Sc, Ti, V, Mn, Fe and Co. Si has a higher concentration in NAA technique which is 331.8 ppm. Sc has a lower concentration in XRF technique which is 0.25 ppm. Nd has a lower concentration in NAA technique which is 3.09 - 10-5 ppm. Finally, it is found that the NAA is better to detect the elements than XRF.

Teaching Method for Comprehensive English Integration of Grammar-translation Method and Communicative Approach

Comprehensive English is a very basic and important course for English majors,according to the features of the text-book A New English Course,teachers should adopt the integration of grammar translation method and communicative approach to improve students' linguistic competence and communicative competence.

A Possible Approach to Introduce Word Memorizing Methods into College English Teaching

Words acquisition should be the most decisive and basic part, though modern English education does not take enough attention, especially in college English teaching. A recent survey on the Internet reveals that college students are worrying about their words power very much, eager to find an efficient and effective way. Hence, various modes of word memorizing methods are collected and a brief classification and remark are available. By an overall analysis of those methods, a new approach compromised by different kinds of methods turns out. This new approach completely abides by the philosophy of pragmatism, and every idea with practical use will be introduced to it, e.g. psychology of language and so on.

Consideration on Vocational Students' Participation in Class:With Special Reference to Task-based Approach and Traditional Method

This paper covers an experimental study on vocational students' participation in the class under task-based approach and traditional grammar-translation teaching method.As vocational colleges in China have developed rapidly,teachers are still exploring and experimenting with different teaching approaches in order to find the suitable one(s).Using the theory of task-based approach,the grammartranslation method,the author conducts an experiment by recording.The following key issue has been addressed and some conclusive results have been made.The paper intends to find an answer to the following question:Under which teaching approach can students participate in the class more actively? Based on the above research work,the following result has been reached:Task-based approach can promote students' mastering of vocabulary and grammar,and students participate in the class more actively.The author would like to share her experiences with others in pedagogical studies of teaching vocational college students English.

On the Reforms of the College English Teaching—More Advantages of the Communicative Approach over the Grammar-Translation Method

With the world globalization, China's communication with other countries has become more frequent. It is in great demand that a large number of college graduates who not only master their major but also do well in communication in English with English speakers. However, such graduates are scare because the backward teaching method-the Grammar-Traditional Method, cannot meet what the contemporary Chinese society demands. The reforms of the college English teaching are urgent and necessary. This paper first explores the major problems existing in the college English teaching. Furthermore, it introduces the basic theory of the Communicative Approach and analyzes its advantages in college English teaching.

One Step Positive Approach for Sheet Metal Forming Simulation Based on Quasi-conjugate-gradient Method

In one step inverse finite element approach, an initial blank shape is normally predicted from the final deformed shape. The final deformed shape needs to be trimmed into a final part after stamping, the trimmed area, therefore, needs to be compensated manually before using one step inverse approach, which causes low efficiency and in consistency with the real situation. To solve this problem, one step positive approach is proposed to simulate the sheet metal stamping process. Firstly the spatial initial solution of one step positive method is preliminarily obtained by using the mapping relationship and area coordinates, then based on the deformation theory the iterative solving is carried out in three-dimensional coordinate system by using quasi-conjugate-gradient method. During iterative process the contact judgment method is introduced to ensure that the nodes on the spatial initial solution are not separated from die surface. The predicted results of sheet metal forming process that include the shape and thickness of the stamped part can be obtained after the iterative solving process. The validity of the proposed approach is verified by comparing the predicted results obtained through the proposed approach with those obtained through the module of one step inverse approach in Autoform and the real stamped part. In one step positive method, the stamped shape of regular sheet can be calculated fast and effectively. During the iterative solution, the quasi-conjugate-gradient method is proposed to take the place of solving system of equations, and it can improve the stability and precision of the algorithm.

A Simple Weighted Integration Method for Calculating Surface Tension Force to Suppress Parasitic Flow in the Level Set Approach

Parasitic flows may occur in the numerical simulation of incompressible multiphase flow due to errors in the calculation of surface tension terms, specifically for the curvature and unit normal vector. An improved method for calculating the surface tension based on the level set approach is proposed, in which the contribution of not only the center node but also the rest area of a control volume to the calculation of surface tension is considered in a balanced manner. The weighted integration method (WIM) is more consistent with the concept of a banded interface in the level set method. It is applied to the temporal evolution of a two-dimensional neutrally buoyant liquid drop and a buoyancy driven deformable bubble in an immiscible fluid for the validation of WIM. The results show that the parasitic flows are evidently suppressed by the weighted integration method. The weight factors for WIM in 3-D cases are also suggested.

A Simple Weighted Integration Method for Calculating Surface Tension Force to Suppress Parasitic Flow in the Level Set Approach

Parasitic flows may occur in the numerical simulation of incompressible multiphase flow due to errors in the calculation of surface tension terms, specifically for the curvature and unit normal vector. An improved method for calculating the surface tension based on the level set approach is proposed, in which the contribution of not only the center node but also the rest area of a control volume to the calculation of surface tension is considered in a balanced manner. The weighted integration method (WIM) is more consistent with the concept of a banded in- terface in the level set method. It is applied to the temporal evolution of a two-dimensional neutrally buoyant liquid drop and a buoyancy driven deformable bubble in an immiscible fluid for the validation of WIM. The results show that the parasitic flows are evidently suppressed by the weighted integration method. The weight factors for WIM in 3-D cases are also suggested.

Equivalence of Ratio and Residual Approaches in the Homotopy Analysis Method and Some Applications in Nonlinear Science and Engineering

A ratio approach based on the simple ratio test associated with the terms of homotopy series was proposed by the author in the previous publications.It was shown in the latter through various comparative physical models that the ratio approach of identifying the range of the convergence control parameter and also an optimal value for it in the homotopy analysis method is a promising alternative to the classically used h-level curves or to the minimizing the residual(squared)error.A mathematical analysis is targeted here to prove the equivalence of both the ratio approach and the traditional residual approach,especially regarding the root-finding problems via the homotopy analysis method.Examples are provided to further justify this.Moreover,it is conjectured that every nonlinear differential equation can be considered as a root-finding problem by plugging a parameter in it from a physical viewpoint.Two examples from the boundary and initial and value problems are provided to verify this assertion.Hence,besides the advantages as deciphered in the previous publications,the feasibility of the ratio approach over the traditional residual approach is made clearer in this paper.

A Hybrid Unit Commitment Approach Incorporating Modified Priority List with Charged System Search Methods

This paper presents a new hybrid approach that combines Modified Priority List (MPL) with Charged System Search (CSS), termed MPL-CSS, to solve one of the most crucial power system’s operational optimization problems, known as unit commitment (UC) scheduling. The UC scheduling problem is a mixed-integer nonlinear problem, highly-dimensional and extremely constrained. Existing meta-heuristic UC solution methods have the problems of stopping at a local optimum and slow convergence when applied to large-scale, heavily-constrained UC applications. In the first step of the proposed method, initial hourly optimum solutions of UC are obtained by Modified Priority List (MPL);however, the obtained UC solution may still be possible to be further improved. Therefore, in the second step, the CSS is utilized to achieve higher quality solutions. The UC is formulated as mixed integer linear programming to ensure the tractability of the results. The proposed method is successfully applied to a popular test system up to 100 units generators for both 24-hr and 168-hr system. Computational results show that both solution cost and execution time are superior to those of published methods.

Critical Approach to Methods of Glacier Reconstruction in High Asia and Discussion of the Probability of a Qinghai-Xizang (Tibetan) Inland Ice

This overview discusses old and new results as to the controversy on the past glacier extension in High Asia, which has been debated for 35 years now. This paper makes an attempt to come closer to a solution. H.v. Wissmann's interpretation (1959) of a small-scale glaciation contrasts with M. Kuhle's reconstruction (1974) of a large-scale glaciation with a 2.4 million km2 extended Qinghai-Xizang (Tibetan) inland glaciation and a Himalaya-Karakorum icestream network. Both opinions find support but also contradiction in the International and Chinese literature (Academia Sinica). The solution of this question is of supraregional importance because of the subtropical position of the concerned areas. In case of large albedo-intensive ice surfaces, a global cooling would be the energetical consequence and, furthermore, a breakdown of the summer monsoon. The current and interglacial heat-low above the very effective heating panel of the Qinghai-Xizang (Tibetan) Plateau exceeding 4000 m, which gives rise to this monsoon circulation, would be replaced by the cold-high of an inland ice. In addition, the plate-tectonically created Pleistocene history of the uplift of High Asia — should the occasion arise up to beyond the snowline (ELA) —would attain a paleoclimatically great, perhaps global importance. In case of a heavy superimposed ice load, the question would come up as to the glacio-isostatic interruption of this primary uplift. The production of the loesses sedimentated in NE-China and their very probable glacial genesis as well as an eustatic lowering of the sea-level by 5 to 7 m in the maximum case of glaciation are immediately tied up with the question of glaciation we want to discuss. Not the least, the problems of biotopes of the sanctuary-centres of flora and fauna, i.e., interglacial re-settlement, are also dependent on it. On the basis of this Quaternary- geomorphological-glaciological connection, future contributions are requested on the past glaciation, the current and glacial permafrost table and periglacial development, the history of uplift, and the development of Ice Age lakes and loess, but also on the development of vegetation and fauna in High Asia.

Pseudospin symmetric solutions of the Dirac equation with the modified Rosen-Morse potential using Nikiforov-Uvarov method and supersymmetric quantum mechanics approach

Employing the Pekeris-type approximation to deal with the pseudo-centrifugal term,we analytically study the pseudospin symmetry of a Dirac nucleon subjected to equal scalar and vector modified Rosen-Morse potential including the spin-orbit coupling term by using the Nikiforov-Uvarov method and supersymmetric quantum mechanics approach.The complex eigenvalue equation and the total normalized wave functions expressed in terms of Jacobi polynomial with arbitrary spin-orbit coupling quantum number k are presented under the condition of pseudospin symmetry.The eigenvalue equations for both methods reproduce the same result to affirm the mathematical accuracy of analytical calculations.The numerical solutions obtained for different adjustable parameters produce degeneracies for some quantum number.

Quantitative comparison of cranial approaches in the anatomy laboratory: A neuronavigation based research method

AIMTo describe the development and validation of a novel neuronavigation-based method, which allows the quan-tification of the anatomical features that define anapproach, as well as real-time visualization of the surgicapyramid. METHODSThe method was initially developed with commercially-available hardware for coordinate collection （a digitizerand a frameless navigation system） and software forvolume rendering; dedicated neuronavigation software （ApproachViewer, part of GTx-UHN） was then developed. The accuracy of measurements and the possibility of volumetric rendering of surgical approaches simulated in a phantom were compared among three different methods and commercially-available radiological software. In the anatomy laboratory, ApproachViewer was applied to the comparative quantitative analysis of multiple neurosurgical approaches and was used by many surgeons who were untrained for the research method.RESULTSThe accuracy of ApproachViewer is comparable to com-mercially-available radiological software. In the anatomy laboratory, the method appears versatile. The system can be easily used after brief training. ApproachViewer allows for real-time evaluation and comparison of surgical approaches, as well as post-dissection analyses of collected data. The accuracy of the method depends on the navigation registration： with a 1-2 mm registration error, it is adequate for evaluation and comparison of most neurosurgical approaches.CONCLUSIONThis new research method and software allows semi-automated visualization, quantifcation, and comparison of neurosurgical approaches in the anatomy laboratory.

Indirect-approach method for specified-end points seismic ray tracing in three dimen-sional inhomogeneous media

Generally speaking, the factors of both medium and tectonic that give rise to heterogeneity of the earth crust and mantle structures should be taken into account simultaneously in three dimensional seismic ray tracing. In this paper, the three dimensional structure models are constructed with the model similar to generation system in computer aid design and manufacturing (CAD/CAM). Based on the algorithm proposed by Cerveny et al . for complete seismic ray tracing in complex three dimensional structures, a new technique called the indirect approach method for two point seismic ray tracing in three dimensional laterally heterogeneous media has been put forward, and its numerical computing examples were given.

Application of Dynamic Linear Detecting Method in Data Processing of the Portable Blood Sugar Analyzer

In this paper,a dynamic linear detecting method,that the non-linear coefficient NL% was led and the non-linearity of data were estimated continuously and dynamically and determined when NL% exceeded reference value (5%),was used for data processing and could solve the problem caused by the phenomenon of substrate depleting occurred following the redox reaction in portable blood sugar analyzer.By contrast to the conventional end-point method,the dynamic linear detecting method is based on multipoint data collecting.Experiments of measuring the calibration glucose solution with 8 various concentrations from 50 mg/dl to 400 mg/dl were carried out with the analyzer developed by our group.The linear regression curve,whose correlation for the data was 0.9995 and the residual was 2.8080,were obtained.The obtained correlation,residual, and the computation workload are all fit for the portable blood sugar analyzer.

Airfoil design optimization based on lattice Boltzmann method and adjoint approach

We present a new aerodynamic design method based on the lattice Boltzmann method （LBM） and the adjoint approach. The flow field and the adjoint equation are numerically simulated by the GILBM （generalized form of interpolation supplemented LBM） on non-uniform meshes. The first-order approximation for the equilibrium dis- tribution function on the boundary is proposed to diminish the singularity of boundary conditions. Further, a new treatment of the solid boundary in the LBM is described par- ticularly for the airfoil optimization design problem. For a given objective function, the adjoint equation and its boundary conditions are derived analytically. The feasibility and accuracy of the new approach have been perfectly validated by the design optimization of NACA0012 airfoil.

Applying a Step Approach Method in Solving the Multi-Frequency Radiation From a Complex Obstacle

In this paper,a step approach method in the time domain is developed to calculate the radiated waves from an arbitrary obstacle pulsating with multiple frequencies.The computing scheme is based on the Boundary Integral Equation and derived in the time domain;thus,the time-harmonic Neumann boundary condition can be imposed.By the present method,the values of the initial conditions are set to zero,and the approach process is carried forward in a loop from the first time step to the last.At each time step,the radiated pressure on each element is updated.After several loops,the correct radiated pressures can be obtained.A sphere pulsating with a monopole frequency in an infinite acoustic domain is calculated first.This result is compared with the analytical solution,and both of them are in good agreement.Then,a complex-shaped radiator is taken as the studied case.The pulsating frequency of this case is multiple,and the waves propagate in half space.It is shown that the present method can treat multiple-frequency pulsation well,even when the radiator is a complex shape,and a robust convergence can be attained quickly.

Approach to Riemann Hypothesis by Combined Commensurable Step Function Approximation with Bonnet Method

To the Riemann hypothesis, we investigate first the approximation by step-wise Omega functions Ω(u) with commensurable step lengths u0 concerning their zeros in corresponding Xi functions Ξ(z). They are periodically on the y-axis with period proportional to inverse step length u0. It is found that they possess additional zeros off the imaginary y-axis and additionally on this axis and vanish in the limiting case u0 → 0 in complex infinity. There remain then only the “genuine” zeros for Xi functions to continuous Omega functions which we call “analytic zeros” and which lie on the imaginary axis. After a short repetition of the Second mean-value (or Bonnet) approach to the problem and the derivation of operational identities for Trigonometric functions we give in Section 8 a proof for the position of these genuine “analytic” zeros on the imaginary axis by construction of a contradiction for the case off the imaginary axis. In Section 10, we show by a few examples that monotonically decreasing of the Omega functions is only a sufficient condition for the mentioned property of the positions of zeros on the imaginary axis but not a necessary one.

On the Approaching Domain Obtained by Finite Element Method

The use of finite element method leads to replacing the initial domain by an approaching domain. Under some appropriate assumptions, we prove that there exists a W1,+∞-diffeomorphism from the original domain to the approaching domain.