Current-Aided Multiple-AUV Cooperative Localization and Target Tracking in Anchor-Free Environments

In anchor-free environments,where no devices with known positions are available,the error growth of autonomous underwater vehicle(AUV)localization and target tracking is unbounded due to the lack of references and the accumulated errors in inertial measurements.This paper aims to improve the localization and tracking accuracy by involving current information as extra references.We first integrate current measurements and maps with belief propagation and design a distributed current-aided message-passing scheme that theoretically solves the localization and tracking problems.Based on this scheme,we propose particle-based cooperative localization and target tracking algorithms,named CaCL and CaTT,respectively.In AUV localization,CaCL uses the current measurements to correct the predicted and transmitted position information and alleviates the impact of the accumulated errors in inertial measurements.With target tracking,the current maps are applied in CaTT to modify the position prediction of the target which is calculated through historical estimates.The effectiveness and robustness of the proposed methods are validated through various simulations by comparisons with alternative methods under different trajectories and current conditions.

Distributed localization for anchor-free sensor networks

Geographic location of nodes is very useful in a sensor network. Previous localization algorithms assume that there exist some anchor nodes in this kind of network, and then other nodes are estimated to create their coordinates. Once there are not anchors to be deployed, those localization algorithms will be invalidated. Many papers in this field focus on anchor-based solutions. The use of anchors introduces many limitations, since anchors require external equipments such as global position system, cause additional power consumption. A novel positioning algorithm is proposed to use a virtual coordinate system based on a new concept--virtual anchor. It is executed in a distributed fashion according to the connectivity of a node and the measured distances to its neighbors. Both the adjacent member information and the ranging distance result are combined to generate the estimated position of a network, one of which is independently adopted for localization previously. At the position refinement stage the intermediate estimation of a node begins to be evaluated on its reliability for position mutation; thus the positioning optimization process of the whole network is avoided falling into a local optimal solution. Simulation results prove that the algorithm can resolve the distributed localization problem for anchor-free sensor networks, and is superior to previous methods in terms of its positioning capability under a variety of circumstances.

Deep brain implantable microelectrode arrays for detection and functional localization of the subthalamic nucleus in rats with Parkinson’s disease

The subthalamic nucleus(STN)is considered the best target for deep brain stimulation treatments of Parkinson’s disease(PD).It is difficult to localize the STN due to its small size and deep location.Multichannel microelectrode arrays(MEAs)can rapidly and precisely locate the STN,which is important for precise stimulation.In this paper,16-channel MEAs modified with multiwalled carbon nanotube/poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate)(MWCNT/PEDOT:PSS)nanocomposites were designed and fabricated,and the accurate and rapid identification of the STN in PD rats was performed using detection sites distributed at different brain depths.These results showed that nuclei in 6-hydroxydopamine hydrobromide(6-OHDA)-lesioned brains discharged more intensely than those in unlesioned brains.In addition,the MEA simultaneously acquired neural signals from both the STN and the upper or lower boundary nuclei of the STN.Moreover,higher values of spike firing rate,spike amplitude,local field potential(LFP)power,and beta oscillations were detected in the STN of the 6-OHDA-lesioned brain,and may therefore be biomarkers of STN localization.Compared with the STNs of unlesioned brains,the power spectral density of spikes and LFPs synchronously decreased in the delta band and increased in the beta band of 6-OHDA-lesioned brains.This may be a cause of sleep and motor disorders associated with PD.Overall,this work describes a new cellular-level localization and detection method and provides a tool for future studies of deep brain nuclei.

SNR and RSSI Based an Optimized Machine Learning Based Indoor Localization Approach:Multistory Round Building Scenario over LoRa Network

In situations when the precise position of a machine is unknown,localization becomes crucial.This research focuses on improving the position prediction accuracy over long-range(LoRa)network using an optimized machine learning-based technique.In order to increase the prediction accuracy of the reference point position on the data collected using the fingerprinting method over LoRa technology,this study proposed an optimized machine learning(ML)based algorithm.Received signal strength indicator(RSSI)data from the sensors at different positions was first gathered via an experiment through the LoRa network in a multistory round layout building.The noise factor is also taken into account,and the signal-to-noise ratio(SNR)value is recorded for every RSSI measurement.This study concludes the examination of reference point accuracy with the modified KNN method(MKNN).MKNN was created to more precisely anticipate the position of the reference point.The findings showed that MKNN outperformed other algorithms in terms of accuracy and complexity.

Survey of Indoor Localization Based on Deep Learning

This study comprehensively examines the current state of deep learning (DL) usage in indoor positioning.It emphasizes the significance and efficiency of convolutional neural networks (CNNs) and recurrent neuralnetworks (RNNs). Unlike prior studies focused on single sensor modalities like Wi-Fi or Bluetooth, this researchexplores the integration of multiple sensor modalities (e.g.,Wi-Fi, Bluetooth, Ultra-Wideband, ZigBee) to expandindoor localization methods, particularly in obstructed environments. It addresses the challenge of precise objectlocalization, introducing a novel hybrid DL approach using received signal information (RSI), Received SignalStrength (RSS), and Channel State Information (CSI) data to enhance accuracy and stability. Moreover, thestudy introduces a device-free indoor localization algorithm, offering a significant advancement with potentialobject or individual tracking applications. It recognizes the increasing importance of indoor positioning forlocation-based services. It anticipates future developments while acknowledging challenges such as multipathinterference, noise, data standardization, and scarcity of labeled data. This research contributes significantly toindoor localization technology, offering adaptability, device independence, and multifaceted DL-based solutionsfor real-world challenges and future advancements. Thus, the proposed work addresses challenges in objectlocalization precision and introduces a novel hybrid deep learning approach, contributing to advancing locationcentricservices.While deep learning-based indoor localization techniques have improved accuracy, challenges likedata noise, standardization, and availability of training data persist. However, ongoing developments are expectedto enhance indoor positioning systems to meet real-world demands.

Probability-Enhanced Anchor-Free Detector for Remote-Sensing Object Detection

Anchor-free object-detection methods achieve a significant advancement in field of computer vision,particularly in the realm of real-time inferences.However,in remote sensing object detection,anchor-free methods often lack of capability in separating the foreground and background.This paper proposes an anchor-free method named probability-enhanced anchor-free detector(ProEnDet)for remote sensing object detection.First,a weighted bidirectional feature pyramid is used for feature extraction.Second,we introduce probability enhancement to strengthen the classification of the object’s foreground and background.The detector uses the logarithm likelihood as the final score to improve the classification of the foreground and background of the object.ProEnDet is verified using the DIOR and NWPU-VHR-10 datasets.The experiment achieved mean average precisions of 61.4 and 69.0 on the DIOR dataset and NWPU-VHR-10 dataset,respectively.ProEnDet achieves a speed of 32.4 FPS on the DIOR dataset,which satisfies the real-time requirements for remote-sensing object detection.

Improved PSO-Extreme Learning Machine Algorithm for Indoor Localization

Wi Fi and fingerprinting localization method have been a hot topic in indoor positioning because of their universality and location-related features.The basic assumption of fingerprinting localization is that the received signal strength indication(RSSI)distance is accord with the location distance.Therefore,how to efficiently match the current RSSI of the user with the RSSI in the fingerprint database is the key to achieve high-accuracy localization.In this paper,a particle swarm optimization-extreme learning machine(PSO-ELM)algorithm is proposed on the basis of the original fingerprinting localization.Firstly,we collect the RSSI of the experimental area to construct the fingerprint database,and the ELM algorithm is applied to the online stages to determine the corresponding relation between the location of the terminal and the RSSI it receives.Secondly,PSO algorithm is used to improve the bias and weight of ELM neural network,and the global optimal results are obtained.Finally,extensive simulation results are presented.It is shown that the proposed algorithm can effectively reduce mean error of localization and improve positioning accuracy when compared with K-Nearest Neighbor(KNN),Kmeans and Back-propagation(BP)algorithms.

Phase induced localization transition

Localization phenomenon is an important research field in condensed matter physics.However,due to the complexity and subtlety of disordered systems,new localization phenomena always emerge unexpectedly.For example,it is generally believed that the phase of the hopping term does not affect the localization properties of the system,so the calculation of the phase is often ignored in the study of localization.Here,we introduce a quasiperiodic model and demonstrate that the phase change of the hopping term can significantly alter the localization properties of the system through detailed numerical simulations,such as the inverse participation ratio and multifractal analysis.This phase-induced localization transition provides valuable information for the study of localization physics.

基于anchor-free的光学遥感舰船关重部位检测算法

针对基于深度学习的遥感舰船检测算法存在精细化程度不足、检测效率低的问题,提出一种基于anchor-free的光学遥感舰船关重部位检测算法。所提算法以全卷积的单阶段目标检测(FCOS)算法为基准,在主干网络中引入全局上下文模块,提高网络的特征表达能力;为更好地描述目标的方向性,在预测阶段构建了具有方向表征能力的回归分支;对中心度函数进行优化,使其具备方向感知和自适应能力。实验结果表明:在自建舰船关重部位数据集和HRSC2016上,所提算法的平均精度(AP)比FCOS算法有显著提升;与其他算法相比,所提算法在检测速度和检测精度上均表现优越,具有较高的检测效率。

Interplay between topology and localization on superconducting circuits

Topological insulators occupy a prominent position in the realm of condensed matter physics. Nevertheless, the presence of strong disorder has the potential to disrupt the integrity of topological states, leading to the localization of all states.This study delves into the intricate interplay between topology and localization within the one-dimensional Su–Schrieffer–Heeger(SSH) model, which incorporates controllable off-diagonal quasi-periodic modulations on superconducting circuits.Through the application of external alternating current(ac) magnetic fluxes, each transmon undergoes controlled driving,enabling independent tuning of all coupling strengths. Within a framework of this model, we construct comprehensive phase diagrams delineating regions characterized by extended topologically nontrivial states, critical localization, and coexisting topological and critical localization phases. The paper also addresses the dynamics of qubit excitations, elucidating distinct quantum state transfers resulting from the intricate interplay between topology and localization. Additionally, we propose a method for detecting diverse quantum phases utilizing existing experimental setups.

Dynamical localization in a non-Hermitian Floquet synthetic system

We investigate the non-Hermitian effects on quantum diffusion in a kicked rotor model where the complex kicking potential is quasi-periodically modulated in the time domain.The synthetic space with arbitrary dimension can be created by incorporating incommensurate frequencies in the quasi-periodical modulation.In the Hermitian case,strong kicking induces the chaotic diffusion in the four-dimension momentum space characterized by linear growth of mean energy.We find that the quantum coherence in deep non-Hermitian regime can effectively suppress the chaotic diffusion and hence result in the emergence of dynamical localization.Moreover,the extent of dynamical localization is dramatically enhanced by increasing the non-Hermitian parameter.Interestingly,the quasi-energies become complex when the non-Hermitian parameter exceeds a certain threshold value.The quantum state will finally evolve to a quasi-eigenstate for which the imaginary part of its quasi-energy is large most.The exponential localization length decreases with the increase of the non-Hermitian parameter,unveiling the underlying mechanism of the enhancement of the dynamical localization by nonHermiticity.

Scenario Modeling-Aided AP Placement Optimization Method for Indoor Localization and Network Access

Owing to the ubiquity of wireless networks and the popularity of WiFi infrastructures,received signal strength(RSS)-based indoor localization systems have received much attention.The placement of access points(APs)significantly influences localization accuracy and network access.However,the indoor scenario and network access are not fully considered in previous AP placement optimization methods.This study proposes a practical scenario modelingaided AP placement optimization method for improving localization accuracy and network access.In order to reduce the gap between simulation-based and field measurement-based AP placement optimization methods,we introduce an indoor scenario modeling and Gaussian process-based RSS prediction method.After that,the localization and network access metrics are implemented in the multiple objective particle swarm optimization(MOPSO)solution,Pareto front criterion and virtual repulsion force are applied to determine the optimal AP placement.Finally,field experiments demonstrate the effectiveness of the proposed indoor scenario modeling method and RSS prediction model.A thorough comparison confirms the localization and network access improvement attributed to the proposed anchor placement method.

Elevating Localization Accuracy in Wireless Sensor Networks:A Refined DV-Hop Approach

Localization is crucial in wireless sensor networks for various applications,such as tracking objects in outdoor environments where GPS(Global Positioning System)or prior installed infrastructure is unavailable.However,traditional techniques involve many anchor nodes,increasing costs and reducing accuracy.Existing solutions do not address the selection of appropriate anchor nodes and selecting localized nodes as assistant anchor nodes for the localization process,which is a critical element in the localization process.Furthermore,an inaccurate average hop distance significantly affects localization accuracy.We propose an improved DV-Hop algorithm based on anchor sets(AS-IDV-Hop)to improve the localization accuracy.Through simulation analysis,we validated that the ASIDV-Hop proposed algorithm is more efficient in minimizing localization errors than existing studies.The ASIDV-Hop algorithm provides an efficient and cost-effective solution for localization in Wireless Sensor Networks.By strategically selecting anchor and assistant anchor nodes and rectifying the average hop distance,AS-IDV-Hop demonstrated superior performance,achieving a mean accuracy of approximately 1.59,which represents about 25.44%,38.28%,and 73.00%improvement over other algorithms,respectively.The estimated localization error is approximately 0.345,highlighting AS-IDV-Hop’s effectiveness.This substantial reduction in localization error underscores the advantages of implementing AS-IDV-Hop,particularly in complex scenarios requiring precise node localization.

A UWB/IMU-Assisted Fingerprinting Localization Framework with Low Human Efforts

With the rapid development of smart phone,the location-based services(LBS)have received great attention in the past decades.Owing to the widespread use of WiFi and Bluetooth devices,Received Signal Strength Indication(RSSI)fingerprintbased localization method has obtained much development in both academia and industries.In this work,we introduce an efficient way to reduce the labor-intensive site survey process,which uses an UWB/IMU-assisted fingerprint construction(UAFC)and localization framework based on the principle of Automatic radio map generation scheme(ARMGS)is proposed to replace the traditional manual measurement.To be specific,UWB devices are employed to estimate the coordinates when the collector is moved in a reference point(RP).An anchor self-localization method is investigated to further reduce manual measurement work in a wide and complex environment,which is also a grueling,time-consuming process that is lead to artificial errors.Moreover,the measurements of IMU are incorporated into the UWB localization algorithm and improve the label accuracy in fingerprint.In addition,the weighted k-nearest neighbor(WKNN)algorithm is applied to online localization phase.Finally,filed experiments are carried out and the results confirm the effectiveness of the proposed approach.

Source localization in signed networks with effective distance

While progress has been made in information source localization,it has overlooked the prevalent friend and adversarial relationships in social networks.This paper addresses this gap by focusing on source localization in signed network models.Leveraging the topological characteristics of signed networks and transforming the propagation probability into effective distance,we propose an optimization method for observer selection.Additionally,by using the reverse propagation algorithm we present a method for information source localization in signed networks.Extensive experimental results demonstrate that a higher proportion of positive edges within signed networks contributes to more favorable source localization,and the higher the ratio of propagation rates between positive and negative edges,the more accurate the source localization becomes.Interestingly,this aligns with our observation that,in reality,the number of friends tends to be greater than the number of adversaries,and the likelihood of information propagation among friends is often higher than among adversaries.In addition,the source located at the periphery of the network is not easy to identify.Furthermore,our proposed observer selection method based on effective distance achieves higher operational efficiency and exhibits higher accuracy in information source localization,compared with three strategies for observer selection based on the classical full-order neighbor coverage.

Source localization based on field signatures:Laboratory ultrasonic validation

Location awareness in wireless networks is essential for emergency services,navigation,gaming,and many other applications.This article presents a method for source localization based on measuring the amplitude-phase distribution of the field at the base station.The existing scatterers in the target area create unique scattered field interference at each source location.The unique field interference at each source location results in a unique field signature at the base station which is used for source localization.In the proposed method,the target area is divided into a grid with a step of less than half the wavelength.Each grid node is characterized by its field signature at the base station.Field signatures corresponding to all nodes are normalized and stored in the base station as fingerprints for source localization.The normalization of the field signatures avoids the need for time synchronization between the base station and the source.When a source transmits signals,the generated field signature at the base station is normalized and then correlated with the stored fingerprints.The maximum correlation value is given by the node to which the source is the closest.Numerical simulations and results of experiments on ultrasonic waves in the air show that the ultrasonic source is correctly localized using broadband field signatures with one base station and without time synchronization.The proposed method is potentially applicable for indoor localization and navigation of mobile robots.

Enhancing Indoor User Localization:An Adaptive Bayesian Approach for Multi-Floor Environments

Indoor localization systems are crucial in addressing the limitations of traditional global positioning system(GPS)in indoor environments due to signal attenuation issues.As complex indoor spaces become more sophisticated,indoor localization systems become essential for improving user experience,safety,and operational efficiency.Indoor localization methods based on Wi-Fi fingerprints require a high-density location fingerprint database,but this can increase the computational burden in the online phase.Bayesian networks,which integrate prior knowledge or domain expertise,are an effective solution for accurately determining indoor user locations.These networks use probabilistic reasoning to model relationships among various localization parameters for indoor environments that are challenging to navigate.This article proposes an adaptive Bayesian model for multi-floor environments based on fingerprinting techniques to minimize errors in estimating user location.The proposed system is an off-the-shelf solution that uses existing Wi-Fi infrastructures to estimate user’s location.It operates in both online and offline phases.In the offline phase,a mobile device with Wi-Fi capability collects radio signals,while in the online phase,generating samples using Gibbs sampling based on the proposed Bayesian model and radio map to predict user’s location.Experimental results unequivocally showcase the superior performance of the proposed model when compared to other existing models and methods.The proposed model achieved an impressive lower average localization error,surpassing the accuracy of competing approaches.Notably,this noteworthy achievement was attained with minimal reliance on reference points,underscoring the efficiency and efficacy of the proposed model in accurately estimating user locations in indoor environments.

Regulating Anderson localization with structural defect disorder

Localization due to disorder has been one of the most intriguing theoretical concepts that evolved in condensed matter physics.Here,we expand the theory of localization by considering two types of disorders at the same time,namely,the original Anderson’s disorder and the structural defect disorder,which has been suggested to be a key component in recently discovered two-dimensional amorphous materials.While increasing the degree of both disorders could induce localization of wavefunction in real space,we find that a small degree of structural defect disorder can significantly enhance the localization.As the degree of structural defect disorder increases,localized states quickly appear within the extended phase to enter a broad crossover region with mixed phases.We establish two-dimensional diagrams for the wavefunction localization and conductivity to highlight the interplay between the two types of disorders.Our theoretical model provides a comprehensive understanding of localization in two-dimensional amorphous materials and highlights the promising tunability of their transport properties.

Two-person device-free localization system based on ZigBee and transformer

Most studies on device-free localization currently focus on single-person scenarios.This paper proposes a novel method for device-free localization that utilizes ZigBee received signal strength indication(RSSI)and a Transformer network structure.The method aims to address the limited research and low accuracy of two-person device-free localization.This paper first describes the construction of the sensor network used for collecting ZigBee RSSI.It then examines the format and features of ZigBee data packages.The algorithm design of this paper is then introduced.The box plot method is used to identify abnormal data points,and a neural network is used to establish the mapping model between ZigBee RSSI matrix and localization coordinates.This neural network includes a Transformer encoder layer as the encoder and a fully connected network as the decoder.The proposed method's classification accuracy was experimentally tested in an online test stage,resulting in an accuracy rate of 98.79%.In conclusion,the proposed two-person localization system is novel and has demonstrated high accuracy.

Multiple Targets Localization Algorithm Based on Covariance Matrix Sparse Representation and Bayesian Learning

The multi-source passive localization problem is a problem of great interest in signal pro-cessing with many applications.In this paper,a sparse representation model based on covariance matrix is constructed for the long-range localization scenario,and a sparse Bayesian learning algo-rithm based on Laplace prior of signal covariance is developed for the base mismatch problem caused by target deviation from the initial point grid.An adaptive grid sparse Bayesian learning targets localization(AGSBL)algorithm is proposed.The AGSBL algorithm implements a covari-ance-based sparse signal reconstruction and grid adaptive localization dictionary learning.Simula-tion results show that the AGSBL algorithm outperforms the traditional compressed-aware localiza-tion algorithm for different signal-to-noise ratios and different number of targets in long-range scenes.