介绍了含长周期堆垛有序结构(Long period stacking order,简称LPSO结构)的Mg-RE-Zn(-Zr)合金的研究现状,重点分析了Mg-Gd-Zn(-Zr)合金中14H-LPSO结构的最新研究进展,综述了等通道角挤压和搅拌摩擦加工工艺在镁合金强韧化中的应用现状,...介绍了含长周期堆垛有序结构(Long period stacking order,简称LPSO结构)的Mg-RE-Zn(-Zr)合金的研究现状,重点分析了Mg-Gd-Zn(-Zr)合金中14H-LPSO结构的最新研究进展,综述了等通道角挤压和搅拌摩擦加工工艺在镁合金强韧化中的应用现状,提出了当前Mg-Gd-Zn(-Zr)合金研究需解决的主要问题和未来研究方向,展望了等通道角挤压和搅拌摩擦加工工艺在Mg-Gd-Zn(-Zr)合金强韧化方面的应用前景。展开更多
The microstructure evolutions and mechanical properties of a heterogeneous Mg88Y8Zn4（in at.%） alloy during multi-pass equal channel angular pressing（ECAP） were systematically investigated in this work.The results ...The microstructure evolutions and mechanical properties of a heterogeneous Mg88Y8Zn4（in at.%） alloy during multi-pass equal channel angular pressing（ECAP） were systematically investigated in this work.The results show that four phases,i.e.α-Mg,18 R long period stacking ordered（LPSO） phase,Mg24Y5 and Y-rich phase,are present in cast alloy.During ECAP,dynamic recrystallization（DRX） occurs and the diameter of DRXedα-Mg grains decreases to 0.8 μm.Moreover,precipitation of lamellar 14 H LPSO structure is developed withinα-Mg phase.Both the refinement of α-Mg grains and precipitation of 14 H LPSO contribute to the increase in micro-hardness from 98 HV to 135 HV for α-Mg.In addition,a simplified model describing the evolution of 18 R LPSO phase is established,which illustrates that 18 R undergoes a four-step morphological evolution with increasing strains during ECAP,i.e.original lath → bent lath → cracked lath → smaller particles.Compression test results indicate that the alloy has been markedly strengthened after multi-pass ECAP,and the main reason for the significantly enhanced mechanical properties could be ascribed to the DRXed α-Mg grains,newly precipitated 14 H lamellas,18 R kinking and refined 18 R particles.展开更多
The Mg96Y3Zn1 alloy processed by extrusion and equal channel angular pressing （ECAP） was investigated. It was found that the Mg96Y3Zn1 alloy processed by extrusion and ECAP obtained ultrafine grains and exhibited ex...The Mg96Y3Zn1 alloy processed by extrusion and equal channel angular pressing （ECAP） was investigated. It was found that the Mg96Y3Zn1 alloy processed by extrusion and ECAP obtained ultrafine grains and exhibited excellent mechanical properties. After ECAP, the average grain size of Mg96Y3Zn1 alloy was refined to about 400 nm. The highest strengths with yield strength of 381.45 MPa and ultimate tensile strength of 438.33 MPa were obtained after 2 passes at 623 K. The high strength of Mg96Y3Zn1 alloy was due to the strengthening by the grain refinement, the long period stacking （LPS） structure, solid solution, fine Mg24Y5 particles, and nano-scale precipitates. It was found that the elongation was decreased with pass number increasing. It was because that the cracks were preferentially initiated and propagated in the interior of X-phase during the tensile test.展开更多
文摘介绍了含长周期堆垛有序结构(Long period stacking order,简称LPSO结构)的Mg-RE-Zn(-Zr)合金的研究现状,重点分析了Mg-Gd-Zn(-Zr)合金中14H-LPSO结构的最新研究进展,综述了等通道角挤压和搅拌摩擦加工工艺在镁合金强韧化中的应用现状,提出了当前Mg-Gd-Zn(-Zr)合金研究需解决的主要问题和未来研究方向,展望了等通道角挤压和搅拌摩擦加工工艺在Mg-Gd-Zn(-Zr)合金强韧化方面的应用前景。
基金the financial support from the Natural Science Foundation of Jiangsu Province(No.BK20160869)the Nantong Science and Technology Project(No.GY12015009)+1 种基金the Fundamental Research Funds for the Central Universities(No.2015B01314)the National Natural Science Foundation of China(No.51501039)
文摘The microstructure evolutions and mechanical properties of a heterogeneous Mg88Y8Zn4（in at.%） alloy during multi-pass equal channel angular pressing（ECAP） were systematically investigated in this work.The results show that four phases,i.e.α-Mg,18 R long period stacking ordered（LPSO） phase,Mg24Y5 and Y-rich phase,are present in cast alloy.During ECAP,dynamic recrystallization（DRX） occurs and the diameter of DRXedα-Mg grains decreases to 0.8 μm.Moreover,precipitation of lamellar 14 H LPSO structure is developed withinα-Mg phase.Both the refinement of α-Mg grains and precipitation of 14 H LPSO contribute to the increase in micro-hardness from 98 HV to 135 HV for α-Mg.In addition,a simplified model describing the evolution of 18 R LPSO phase is established,which illustrates that 18 R undergoes a four-step morphological evolution with increasing strains during ECAP,i.e.original lath → bent lath → cracked lath → smaller particles.Compression test results indicate that the alloy has been markedly strengthened after multi-pass ECAP,and the main reason for the significantly enhanced mechanical properties could be ascribed to the DRXed α-Mg grains,newly precipitated 14 H lamellas,18 R kinking and refined 18 R particles.
基金Project supported by the National Natural Science Foundation of China (51001072)
文摘The Mg96Y3Zn1 alloy processed by extrusion and equal channel angular pressing （ECAP） was investigated. It was found that the Mg96Y3Zn1 alloy processed by extrusion and ECAP obtained ultrafine grains and exhibited excellent mechanical properties. After ECAP, the average grain size of Mg96Y3Zn1 alloy was refined to about 400 nm. The highest strengths with yield strength of 381.45 MPa and ultimate tensile strength of 438.33 MPa were obtained after 2 passes at 623 K. The high strength of Mg96Y3Zn1 alloy was due to the strengthening by the grain refinement, the long period stacking （LPS） structure, solid solution, fine Mg24Y5 particles, and nano-scale precipitates. It was found that the elongation was decreased with pass number increasing. It was because that the cracks were preferentially initiated and propagated in the interior of X-phase during the tensile test.
