A physicochemical method was used to adsorb glycerin in saline wastewater by strong base anion resin(D201).Boric acid,a kind of weak acid,can combine with glycerin,and a specific complex can be produced,which possess ...A physicochemical method was used to adsorb glycerin in saline wastewater by strong base anion resin(D201).Boric acid,a kind of weak acid,can combine with glycerin,and a specific complex can be produced,which possess bigger molecule than glycerin.Then,this specific complex could be adsorbed by strong base anion resin.Via the experiment,the equation of adsorption isotherm with D201 at 20℃ can be shown by lgx/m=1.74lgCe–5.72;for column test with simulative glycerin wastewater,the treatment capability was more than nine bed volumes,and 39.77 mg glycerin could be removed by per gram resin.When the NaCl concentration was 10 g/L,five bed volumes of simulative wastewater could be treated,and the adsorb mass was 29.09 mg/g.When the NaCl concentration was 30 g/L,only three bed volumes of simulative wastewater could be treated,and the adsorb mass was 14.83 mg/g.展开更多
Ca(OH)2 nanoparticles in hydro-alcoholic dispersion (nanolime) were successfully employed in Cultural Heritage conservation, thanks to the ability to overcome the limiting aspects of traditional lime treatments. Nanol...Ca(OH)2 nanoparticles in hydro-alcoholic dispersion (nanolime) were successfully employed in Cultural Heritage conservation, thanks to the ability to overcome the limiting aspects of traditional lime treatments. Nanolime were currently produced by chemical precipitation process, at high temperature, with long times of synthesis, and after several purification steps to remove undesired secondary phases. In this paper, an innovative, simple and original method for nanolime production was described. The method was based on an ion exchange process between an anionic resin and a calcium chloride aqueous solution, operating at room temperature. A pure Ca(OH)2 nanoparticles suspension can be rapidly obtained after separating the resin from suspension, and any purification step was necessary. The exhausted resins can be regenerated and reused for a cyclic nanolime production. Structural and morphological features of the produced nanolime were preliminarily characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). Moreover, XRD measurements allowed estimating nanoparticles reactivity by following their carbonatation process in air, in relation to different water/alcohol ratios and medium or high relative humidity conditions. The produced Ca(OH)2 nanoparticles appeared hexagonally plated, with dimension less than 100 nm and, compared with those obtained by typical wet precipitation method, they proved to be more reactive.展开更多
Sulfate mass transfer coefficient(MTC) is a sensitive parameter to evaluate the kinetic leakage of anion exchange resin used in condensate polishing system of thermal and nuclear power plant.However,a sufficiently pre...Sulfate mass transfer coefficient(MTC) is a sensitive parameter to evaluate the kinetic leakage of anion exchange resin used in condensate polishing system of thermal and nuclear power plant.However,a sufficiently precise determination method has not been well established.In this paper,the final expression of sulfate MTC derived based on plug flow reactor model is the same as Harries' model,which is widely acknowledged in this field.In the determining system we constructed,in-situ calibration of the concentration of sulfate and its cation conductivity was conducted and sulfate MTCs of four typical strongly basic anion exchange resin samples were determined.The systematic error is 8.26% and the calibrated curve used for quantifying sulfate is obtained.The repeatability and reproducibility standard deviation are 0.05×10^(-4) m·s^(-1) and 0.07×10^(-4) m·s^(-1) respectively,which are lower than previous works.By controlling test condition accurately,this study has developed a more precise sulfate MTC determining method.This method provides a basis for further research.展开更多
To isolate and separate thorium from nitric acid solutions, three silica-based anion exchange resins were synthesized. Batch experiments were carried out to investigate adsorption behavior of thorium in nitric acid so...To isolate and separate thorium from nitric acid solutions, three silica-based anion exchange resins were synthesized. Batch experiments were carried out to investigate adsorption behavior of thorium in nitric acid solutions. Adsorption at different concentrations of nitric acid and thorium, influence of contact time and coexisting metal ions, and effect of NO3– were investigated in detail. It was found that at high HNO3 concentrations,the resins exhibited higher adsorption capacity and better affinity towards thorium. The adsorption kinetics could be described by the pseudo-second order model equation, while the adsorption isotherms were well correlated by the Langmuir model. The maximum capacity towards thorium species on SiPyR-N4 was evaluated at 27–28 mg/g-resin. The thermodynamic parameters indicated the adsorption was an exothermic reaction. The presence of NO3– was found to promote the retention of the thorium species.展开更多
This paper presents a new method for preparing anion exchange resins based on crosslinked polystyrene which consists in the acylation of crosslinked polystyrene by FriedelCrafts reaction followed by reductive aminatio...This paper presents a new method for preparing anion exchange resins based on crosslinked polystyrene which consists in the acylation of crosslinked polystyrene by FriedelCrafts reaction followed by reductive amination. Aminated resins are quaternized to formcorresponding strong base anion exchange resins. The method avoids the use of carcinogenic chloromethyl methyl ether which is widely used in the preparation of commercial anion exchange resins.展开更多
Studied the effect of ionic strength on the uptake of taurine on a strong-basic anion exchange resin. The batch phase equilibrium experiments of taurine on the anion exchange resin D290 were conducted at different ion...Studied the effect of ionic strength on the uptake of taurine on a strong-basic anion exchange resin. The batch phase equilibrium experiments of taurine on the anion exchange resin D290 were conducted at different ionic strength, and then the amounts of uptake of taurine on the resin at different pH were determined. The ion exchange mechanisms of taurine on the anion exchange resin at different pH were discussed. Experimental results showed that with increase of the ionic strength of solution, the adsorbed amount of taurine on the resin D290 decreased; Adding small amounts of NaOH or HCl into the system of taurine aqueous solutionD290 anion resin would make the amount of taurine taken up on the resin to decrease due to the competition uptakes of hydroxyl ion with taurine or the decrease in the amount of absorbable zwitterions of taurine in the solution and excluding the cations of taurine from the anion resin.展开更多
Macroporous weak basic anion exchanger (D301R) was used to remove organic substances from drilling wastewater. The effect of pH, temperature and contact time on adsorption behavior was investigated in batch experime...Macroporous weak basic anion exchanger (D301R) was used to remove organic substances from drilling wastewater. The effect of pH, temperature and contact time on adsorption behavior was investigated in batch experiments, which indicated that the COD (Chemical Oxygen Demand) removal ratio of drilling wastewater was approximately 90%, and the COD of treated wastewater was below 70 mg/L under appropriate operating conditions. A mixed liquor of NaOH and NaCI was selected as desorbent because of its better elution performance. The results of column dynamic adsorption and regeneration showed that the COD of wastewater could be efficiently removed by D301R resin, and the resin was easily regenerated by the selected desorbent.展开更多
Decomposition of acetone cyanohydrin is the first-step reaction for preparing (S)-α-cyano-3-phenoxybenzyl alcohol (CPBA) by the one-pot method in organic media. Considering the compatibility of biocatalysts with...Decomposition of acetone cyanohydrin is the first-step reaction for preparing (S)-α-cyano-3-phenoxybenzyl alcohol (CPBA) by the one-pot method in organic media. Considering the compatibility of biocatalysts with chemical catalysts and the successive operation in the bioreactor, anion exchange resin (D301) was used as catalyst for this reaction. External diffusion limitation was excluded by raising rotational speed to higher than 190r·min^-1 in both solvents. Internal diffusion limitation was verified to be insignificant in this reaction system. The effect of acetone cyanohydrin concentration on the reaction was also investigated. An intrinsic kinetic model was proposed when the mass transfer limitation was excluded, and the average deviation of the model is 10.5%.展开更多
文摘A physicochemical method was used to adsorb glycerin in saline wastewater by strong base anion resin(D201).Boric acid,a kind of weak acid,can combine with glycerin,and a specific complex can be produced,which possess bigger molecule than glycerin.Then,this specific complex could be adsorbed by strong base anion resin.Via the experiment,the equation of adsorption isotherm with D201 at 20℃ can be shown by lgx/m=1.74lgCe–5.72;for column test with simulative glycerin wastewater,the treatment capability was more than nine bed volumes,and 39.77 mg glycerin could be removed by per gram resin.When the NaCl concentration was 10 g/L,five bed volumes of simulative wastewater could be treated,and the adsorb mass was 29.09 mg/g.When the NaCl concentration was 30 g/L,only three bed volumes of simulative wastewater could be treated,and the adsorb mass was 14.83 mg/g.
文摘Ca(OH)2 nanoparticles in hydro-alcoholic dispersion (nanolime) were successfully employed in Cultural Heritage conservation, thanks to the ability to overcome the limiting aspects of traditional lime treatments. Nanolime were currently produced by chemical precipitation process, at high temperature, with long times of synthesis, and after several purification steps to remove undesired secondary phases. In this paper, an innovative, simple and original method for nanolime production was described. The method was based on an ion exchange process between an anionic resin and a calcium chloride aqueous solution, operating at room temperature. A pure Ca(OH)2 nanoparticles suspension can be rapidly obtained after separating the resin from suspension, and any purification step was necessary. The exhausted resins can be regenerated and reused for a cyclic nanolime production. Structural and morphological features of the produced nanolime were preliminarily characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). Moreover, XRD measurements allowed estimating nanoparticles reactivity by following their carbonatation process in air, in relation to different water/alcohol ratios and medium or high relative humidity conditions. The produced Ca(OH)2 nanoparticles appeared hexagonally plated, with dimension less than 100 nm and, compared with those obtained by typical wet precipitation method, they proved to be more reactive.
文摘Sulfate mass transfer coefficient(MTC) is a sensitive parameter to evaluate the kinetic leakage of anion exchange resin used in condensate polishing system of thermal and nuclear power plant.However,a sufficiently precise determination method has not been well established.In this paper,the final expression of sulfate MTC derived based on plug flow reactor model is the same as Harries' model,which is widely acknowledged in this field.In the determining system we constructed,in-situ calibration of the concentration of sulfate and its cation conductivity was conducted and sulfate MTCs of four typical strongly basic anion exchange resin samples were determined.The systematic error is 8.26% and the calibrated curve used for quantifying sulfate is obtained.The repeatability and reproducibility standard deviation are 0.05×10^(-4) m·s^(-1) and 0.07×10^(-4) m·s^(-1) respectively,which are lower than previous works.By controlling test condition accurately,this study has developed a more precise sulfate MTC determining method.This method provides a basis for further research.
基金Supported by the National Natural Science Foundation of China(No.91026019)
文摘To isolate and separate thorium from nitric acid solutions, three silica-based anion exchange resins were synthesized. Batch experiments were carried out to investigate adsorption behavior of thorium in nitric acid solutions. Adsorption at different concentrations of nitric acid and thorium, influence of contact time and coexisting metal ions, and effect of NO3– were investigated in detail. It was found that at high HNO3 concentrations,the resins exhibited higher adsorption capacity and better affinity towards thorium. The adsorption kinetics could be described by the pseudo-second order model equation, while the adsorption isotherms were well correlated by the Langmuir model. The maximum capacity towards thorium species on SiPyR-N4 was evaluated at 27–28 mg/g-resin. The thermodynamic parameters indicated the adsorption was an exothermic reaction. The presence of NO3– was found to promote the retention of the thorium species.
基金Supported by High Technology Research and Development Programme of China
文摘This paper presents a new method for preparing anion exchange resins based on crosslinked polystyrene which consists in the acylation of crosslinked polystyrene by FriedelCrafts reaction followed by reductive amination. Aminated resins are quaternized to formcorresponding strong base anion exchange resins. The method avoids the use of carcinogenic chloromethyl methyl ether which is widely used in the preparation of commercial anion exchange resins.
基金Science & Technology Foundation of Guangdong Province of China (No. 2003A3050501)
文摘Studied the effect of ionic strength on the uptake of taurine on a strong-basic anion exchange resin. The batch phase equilibrium experiments of taurine on the anion exchange resin D290 were conducted at different ionic strength, and then the amounts of uptake of taurine on the resin at different pH were determined. The ion exchange mechanisms of taurine on the anion exchange resin at different pH were discussed. Experimental results showed that with increase of the ionic strength of solution, the adsorbed amount of taurine on the resin D290 decreased; Adding small amounts of NaOH or HCl into the system of taurine aqueous solutionD290 anion resin would make the amount of taurine taken up on the resin to decrease due to the competition uptakes of hydroxyl ion with taurine or the decrease in the amount of absorbable zwitterions of taurine in the solution and excluding the cations of taurine from the anion resin.
文摘Macroporous weak basic anion exchanger (D301R) was used to remove organic substances from drilling wastewater. The effect of pH, temperature and contact time on adsorption behavior was investigated in batch experiments, which indicated that the COD (Chemical Oxygen Demand) removal ratio of drilling wastewater was approximately 90%, and the COD of treated wastewater was below 70 mg/L under appropriate operating conditions. A mixed liquor of NaOH and NaCI was selected as desorbent because of its better elution performance. The results of column dynamic adsorption and regeneration showed that the COD of wastewater could be efficiently removed by D301R resin, and the resin was easily regenerated by the selected desorbent.
基金Supported by the National Natural Science Foundation of China(No.29876037)and the Natural Science Foundation ofZhejiang Province(No.296068)
文摘Decomposition of acetone cyanohydrin is the first-step reaction for preparing (S)-α-cyano-3-phenoxybenzyl alcohol (CPBA) by the one-pot method in organic media. Considering the compatibility of biocatalysts with chemical catalysts and the successive operation in the bioreactor, anion exchange resin (D301) was used as catalyst for this reaction. External diffusion limitation was excluded by raising rotational speed to higher than 190r·min^-1 in both solvents. Internal diffusion limitation was verified to be insignificant in this reaction system. The effect of acetone cyanohydrin concentration on the reaction was also investigated. An intrinsic kinetic model was proposed when the mass transfer limitation was excluded, and the average deviation of the model is 10.5%.