Synergistic anionic/zwitterionic mixed surfactant system with high emulsification efficiency for enhanced oil recovery in low permeability reservoirs

Emulsification is one of the important mechanisms of surfactant flooding. To improve oil recovery for low permeability reservoirs, a highly efficient emulsification oil flooding system consisting of anionic surfactant sodium alkyl glucosyl hydroxypropyl sulfonate(APGSHS) and zwitterionic surfactant octadecyl betaine(BS-18) is proposed. The performance of APGSHS/BS-18 mixed surfactant system was evaluated in terms of interfacial tension, emulsification capability, emulsion size and distribution, wettability alteration, temperature-resistance and salt-resistance. The emulsification speed was used to evaluate the emulsification ability of surfactant systems, and the results show that mixed surfactant systems can completely emulsify the crude oil into emulsions droplets even under low energy conditions. Meanwhile,the system exhibits good temperature and salt resistance. Finally, the best oil recovery of 25.45% is achieved for low permeability core by the mixed surfactant system with a total concentration of 0.3 wt%while the molar ratio of APGSHS:BS-18 is 4:6. The current study indicates that the anionic/zwitterionic mixed surfactant system can improve the oil flooding efficiency and is potential candidate for application in low permeability reservoirs.

Effect of solvent on the initiation mechanism of living anionic polymerization of styrene:A computational study

For living anionic polymerization(LAP),solvent has a great influence on both reaction mechanism and kinetics.In this work,by using the classical butyl lithium-styrene polymerization as a model system,the effect of solvent on the mechanism and kinetics of LAP was revealed through a strategy combining density functional theory(DFT)calculations and kinetic modeling.In terms of mechanism,it is found that the stronger the solvent polarity,the more electrons transfer from initiator to solvent through detailed energy decomposition analysis of electrostatic interactions between initiator and solvent molecules.Furthermore,we also found that the stronger the solvent polarity,the higher the monomer initiation energy barrier and the smaller the initiation rate coefficient.Counterintuitively,initiation is more favorable at lower temperatures based on the calculated results ofΔG_(TS).Finally,the kinetic characteristics in different solvents were further examined by kinetic modeling.It is found that in benzene and n-pentane,the polymerization rate exhibits first-order kinetics.While,slow initiation and fast propagation were observed in tetrahydrofuran(THF)due to the slow free ion formation rate,leading to a deviation from first-order kinetics.

Interactions of Anionic and Neutral Serine with Pure and Metal-doped Graphene Studied by Density Functional Theory

We present a theoretical study of interactions of anionic and neutral serine （Ser） on pure or metal-doped graphene surfaces using density functional theory calculations. Interactions of both types of Ser with the pure graphene surface show weak non-covalent interactions due to the formation of-COOH…π, -COO^-…π, and -OH…π interactions. On metal- doped graphene, covalent interactions to the surface dominate, due to the formation of strong metal-O and O-metal-O interactions. Furthermore, the doped Fe, Cr, Mn, A1, or Ti enhances the ability of graphene to attract both types of Ser by a combination of the adsorption energy, the density of states, the Mulliken atomic charges, and differences of electron density. At the same time, the interaction strengths of anionic Ser on various graphene surfaces are stronger than those of neutral Ser. These results provide useful insights for the rational design and development of graphene-based sensors for the two forms of Ser by introducing appropriate doped atoms. Ti and Fe are suggested to be the best choices among all doped atoms for the anionic Ser and neutral Ser, respectively.

Preparation of a Novel Acid Doped Polyaniline Adsorbent for Removal of Anionic Pollutant from Wastewater

Polyaniline(PANI) was one of the most extensively studied adsorbents due to its low cost and good environmental stability. The objective of the current study was to improve the selective capabilities of PANI for anionic dyes. We found that the acid doped PANI prepared with hydrochloric acid and p-toluenesulfonic acid(PTSA) could selectively adsorb anionic dyes. It exhibited very good selectivity for OG dye, the mechanism was proposed based on the chemical interaction of PANI with the sulfonate group of the dyes. The effects of solution p H, initial dye concentration, and different HCl/PTSA mole ratios on the adsorption capacity of OG have been investigated. Kinetic simulations indicated that the adsorption process could be well represented by pseudo-second-order kinetic plots. The isothermal adsorption curve fitting also showed that the adsorption process could be well described by the Langmuir isothermal equation. The results showed that acid doped PANI could be employed as a promising adsorbent for anion removal from dye wastewater.

Preparation and utilization of wheat straw anionic sorbent for the removal of nitrate from aqueous solution

In order to reduce the impact of eutrophication caused by agricultural residues （i.e., excess nitrate） in aqueous solution, economic and effective anionic sorbents are required. In this article, we prepared anionic sorbent using wheat straw. Its structural characteristics and adsorption properties for nitrate removal from aqueous solution were investigated. The results indicate that the yield of the prepared anionic sorbent, the total exchange capacity, and the maximum adsorption capacity were 350%, 2.57 mEq/g, and 2.08 mmol/g, respectively. The Freundlich isotherm mode is more suitable than the Langmuir mode and the adsorption process accords with the first order reaction kinetic rate equation. When multiple anions （SO4^2-, H2PO4^-, NO3^-, and NO2^-） were present, the isotherm mode of prepared anionic sorbent for nitrate was consistent with Freundlich mode; however, the capacity of nitrate adsorption was reduced by 50%. In alkaline solutions, about 90% of adsorbed nitrate ions could be desorbed from prepared anionic sorbent. The results of this study confirmed that the wheat straw anionic sorbent can be used as an excellent nitrate sorbent that removes nitrate from aqueous solutions.

High-Performance Na-Ion Storage of S-Doped Porous Carbon Derived from Conjugated Microporous Polymers

Na-ion batteries(NIBs)have attracted considerable attention in recent years owing to the high abundance and low cost of Na.It is well known that S doping can improve the electrochemical performance of carbon materials for NIBs.However,the current methods for S doping in carbons normally involve toxic precursors or rigorous conditions.In this work,we report a creative and facile strategy for preparing S-doped porous carbons(SCs)via the pyrolysis of conjugated microporous polymers(CMPs).Briefly,thiophene-based CMPs served as the precursors and doping sources simultaneously.Simple direct carbonization of CMPs produced S-doped carbon materials with highly porous structures.When used as an anode for NIBs,the SCs exhibited a high reversible capacity of 440 mAh g?1 at 50 mA g?1 after 100 cycles,superior rate capability,and excellent cycling stability(297 mAh g?1 after 1000 cycles at 500 mA g?1),outperforming most S-doped carbon materials reported thus far.The excellent performance of the SCs is attributed to the expanded lattice distance after S doping.Furthermore,we employed ex situ X-ray photoelectron spectroscopy to investigate the electrochemical reaction mechanism of the SCs during sodiation-desodiation,which can highlight the role of doped S for Na-ion storage.

THE RELATIONSHIP BETWEEN THE STRUCTURAL TYPE OF ANIONIC GROUP AND SHG EFFECT IN BORON-OXYGEN COMPOUNDS

The relationship between the Structural type of anionic group and SHG effect in oxide compounds has been reviewed.

Synthesis,Structure and Biological Activities of a Novel Anionic Organotin(Ⅳ)Complex{[(pClC6H4CH2)Sn(H2O)(Cl)2OCOCH(O)CH(O)CO2Sn(H2O)(Cl)2(p-ClC6H4CH2)]·2(HNEt3)}

A novel anionic organotin(Ⅳ) complex {[(pClCHCH)Sn(HO)(Cl)OCOCH(O)CH(O)COSn(HO)(Cl)(p-ClCHCH)]·2(HNEt)}(1) was synthesized by the reaction of di(p-chlorobenzy)tin dichloride with the D-tartaric acid in 2:1 molar in the presence of an organic base triethylamine. The structure was characterized by elemental analysis, IR, TG, XRD and single-crystal X-ray diffraction. It crystallizes in triclinic, P1 space group, with a = 0.7067(1), b = 1.9762(3), c = 2.2383(3) nm, α = 91.544(2)°, β = 90.075(2)°, γ = 90.110(2)°, V = 3.1247(7) nm~3, Z = 3, Dc = 1.621 g/cm~3, m(Mo Kα) = 16.29 cm–1, F(000) = 1530, R = 0.0394, wR = 0.1092,(Δρ)max = 1224 and(Δρ)min = –840 e/nm~3. The stabilities, orbital energies and composition characteristics of some frontier molecular orbitals of 1 have been carefully investigated with quantum chemistry calculation. In addition, the in vitro antitumor activity suggested that 1 had stronger inhibitory activity on H460, MCF7 than on A549.

Synthesis and Characterization of Zirconia Nanocrystallites by Cationic Surfactant and Anionic Surfactant

Study on nanomaterials has attracted great interests in recent years. In this article, zirconia nanocrystallites of different structures have been successfully synthesized via hydrothermal methods with cationic surfactant （CTAB） and anionic surfactant （SDS）, respectively. Differential Scanning Calorimeter （DSC-TG）, X-ray Diffractometer （XRD）, Transmission Electron Microscope （TEM）, Ultraviolet-Visible （UV-vis） and N2 adsorption-desorption analyses are used for their structure characteristics. The results show that the cationic surfactant has a distinctive direction effect on the formation of zirconia nanocrystallites, while the anionic surfactant has a self-assembly synergistic effect on them. The sample synthesized with the cationic surfactant presents good dispersion with the main phase of tetragonal zirconia, and the average nanocrystal size is around 15 nm after calcination at 500 ℃. While the sample synthesized with the anionic surfactant exhibits a worm-like mesoporous structure with pure tetragonal phase after calcination at 500 ℃ and with good thermal stability.

Robust S-doped TiO_(2)@N,S-codoped carbon nanotube arrays as free-binder anodes for efficient sodium storage

Titanium dioxide(TiO_2) has been investigated broadly as a stable,safe,and cheap anode material for sodium-ion batteries in recent years.However,the poor electronic conductivity and inherent sluggish sodium ion diffusion hinder its practical applications.Herein,a self-template and in situ vulcanization strategy is developed to synthesize self-supported hybrid nanotube arrays composed of nitrogen/sulfur-codoped carbon coated sulfur-doped TiO_2 nanotubes(S-TiO_2@NS-C) starting from H_2 Ti_2 O_5-H_2 O nanoarrays.The S-TiO_2@NS-C composite with one-dimensional nano-sized subunits integrates several merits.Specifically,sulfur doping strongly improves the Na~+ storage ability of TiO_2@C-N nanotubes by narrowing the bandgap of original TiO_2.Originating from the nanoarrays structures built from hollow nanotubes,carbon layer and sulfur doping,the sluggish Na~+ insertion/extraction kinetics is effectively improved and the volume variation of the electrode material is significantly alleviated.As a result,the S-TiO_2@NS-C nanoarrays present efficient sodium storage properties.The greatly improved sodium storage performances of S-TiO_2@NS-C nanoarrays confirm the importance of rational engineering and synthesis of hollow array architectures with higher complexity.

Effect of an Anionic Surfactant on Hydraulic Conductivities of Sodium- and Calcium-Saturated Soils

The effect of sodium dodecylbenzenesulfonate (SDBS), an anionic surfactant used widely in household products and industrial processes, on saturated hydraulic conductivities (Ksat) of an Anthrosol saturated with sodium (Na-soil) or calcium (Ca-soil) was analyzed in a laboratory experiment using the constant head method, and adsorption and dispersion experiments were also conducted to infer the possible mechanisms of Ksat fluctuations. The results showed that SDBS was more intensely adsorbed in the Ca-soil than in the Na-soil. With an increase in the SDBS concentration, the stability of the Na-soil suspensions decreased when the SDBS concentration was less than 1.2 mmol L-1 and then above this concentration, increased markedly, while the stability of the Ca-soil suspensions increased gradually at all SDBS concentrations studied. With an increase in the SDBS concentration, the Ksat of the Na-soil increased, which resulted mainly from the increase of water channels in the soil because of the coagulation of the soil particles, while the Ksat of Ca-soil decreased mainly on account of the clogging of partial water channels by precipitated Ca(DBS)2 and the fine soil particles generated.

Crystalline Morphology and Crystallization Characteristics of In-situ Blends of Anionic Polyamide 6 with Noncrystallizable Semiaromatic Polyamide Copolymer

A noncrystallizable semiaromatic polyamide copolymer（NSAP） was dissolved in molten caprolactam, and PA6/ NSAP blends were produced in-situ via the anionic ring-opening polymerization of caprolactam. The presence of a single loss tangent（tanS） peak measured by means of dynamic mechanical analysis（DMA） proves the miscibility between PA6 and NSAP in the blends. It was found that there existed drastic changes in the crystallographic form and crystallization kinetics for the in-situ blends, e.g. , when 20% NSAP was added, nearly all crystallites existed in the ,y form and the crystallization could hardly occur upon cooling even at a rate of 2.5 ℃/min. Moreover, cold crystallization appears during the subsequent heating, and its melting point is 40 ℃ lower than that of the virgin system. On the other hand, the size of the spherulites only decreases modestly. It is suggested that the introduction of irregular stiff segments originated from NSAP into PA6 macromolecule chain, which resulted from transamidation during the polymerization play a dominant role in the drastic change of crystallization kinetics and the resultant morphology of the in-situ blends.

Influences of anionic and cationic dopants on the morphology and optical properties of PbS nanostructures

Selenium and zinc are used as anionic and cationic dopant elements to dope PbS nanostructures. The undoped and doped PbS nanostructures are grown using a thermal evaporation method. Scanning electron microscopy （SEM） results show similar morphologies for the undoped and doped PbS nanostructures. X-ray diffraction （XRD） patterns of three sets of the nanostructures indicate that these nanostructures each have a PbS structure with a cubic phase. Evidence of dopant incorporation is demonstrated by X-ray photoelectron spectroscopy （XPS）. Raman spectra of the synthesized samples con- firm the XRD results and indicate five Raman active modes, which relate to the PbS cubic phase for all the nanostructures. Room temperature photoluminescence （PL） and UV-Vis spectrometers are used to study optical properties of the undoped and doped PbS nanostructures. Optical characterization shows that emission and absorption peaks are in the infrared （IR） region of the electromagnetic spectrum for all PbS nanostructures. In addition, the optical studies of the doped PbS nanos- tructures reveal that the band gap of the Se-doped PbS is smaller, and the band gap of the Zn-doped PbS is bigger than the band gap of the undoped PbS nanostructures.

ANIONIC SPECIES OF SiO_2-CONTAINING SODIUM ALUMINATE SOLUTIONS

The anionic species of the SiO_2-containing sodium aluminate solutions prepared by different methods have been investigated by Raman spectra and ultraviolet spectra.It was found that these solutions have different SiO_2-containing anions.The solution prepared by leaching in- dustrial sinter of soda-lime sintering process contains polvsilicate ions with Si-O-Si radicals.

Preparation，Characterization and Catalytic Activity of Anionic Clay Pillared by GaW＿9Zn＿3

Ｐｒｅｐａｒａｔｉｏｎ，ＣｈａｒａｃｔｅｒｉｚａｔｉｏｎａｎｄＣａｔａｌｙｔｉｃＡｃｔｉｖｉｔｙｏｆＡｎｉｏｎｉｃＣｌａｙＰｉｌｌａｒｅｄｂｙＧａＷ＿９Ｚｎ＿３ＺＨＡＨＧＪｉ－ｙｕ；ＺＨＡＮＧＳｈｕ－ｙｕｎ；ＹＵＸｉｎ－ｗｕ；ＨＵＣｈａｎｇ－ｗｅｎＬ...

Synthesis of Silica Hollow Spheres with Diameter Around 50 nm by Anionic Surfactant

Silica hollow spheres（SHSs） have attracted great attention because of their low toxicity, low density, large surface area, high chemical and thermal stability, and surface permeability. They can be widely applied in storage^[l], catalysis^[2], drug deli- very^[3,4], low-dielectric-constant materials^[5], low-refractive materials^[6-8], and so on. Up to now, there have been various methods to produce SHSs. Inorganic^[9] or organic particles^[10], such as polystyrene or calcium carbonate, were used as hard templates to create hollow cavities, However, the multistep synthetic process and the lack of structural robustness of the shells upon template removal process weaken their applica- tion. Soft templates, including oil-in-water emulsions^[11,12], vesicles^[13], micelle^[14,15] and gas bubbles^[16], are applied widely.

Phase Separation and Microstructure of Mixed Surfactants Solution Containing Cationic Geminis and Traditional Anionic Surfactant

The properties of aqueous two-phase system (ATPS) of mixed solution containing gemini cationic surfactant trimethylene-1,3-bis(dodecyldimethyl ammonium) bromide (12-3-12, 2Br-) and traditional anionic surfactant sodium dodecyl sulfate (SDS) with or without added salt have been studied. An ATPS is formed in a narrow region of the ternary phase diagram different from that of traditional aqueous cationic-anionic surfactant systems. In ATPS region, the lowest total concentration of surfactants varies with the mixing ratio of geminis to SDS. Photographs obtained from freeze-etching, negative-staining and transmission electron microscopy show that the microstructures of two phases are different from each other. Micelles and vesicles can coexist in a single phase. The addition of salts can change the phase diagram of ATPS. Furthermore, the added salts promote the aggregation of rod-like micelles to form coarse network structure that increase the viscosity of solutions. The negative ions of the added salts are the determining factor.

Evaluation of chitosaneanionic polymers based tablets for extended-release of highly watersoluble drugs

The objective of this study is to develop chitosaneanionic polymers based extendedrelease tablets and test the feasibility of using this system for the sustained release of highly water-soluble drugs with high drug loading.Here,the combination of sodium valproate(VPS)and valproic acid(VPA)were chosen as the model drugs.Anionic polymers studied include xanthan gum(XG),carrageenan(CG),sodium carboxymethyl cellulose(CMC-Na)and sodium alginate(SA).The tablets were prepared by wet granulation method.In vitro drug release was carried out under simulated gastrointestinal condition.Drug release mechanism was studied.Compared with single polymers,chitosaneanionic polymers based system caused a further slowdown of drug release rate.Among them,CS exanthan gum matrix system exhibited the best extended-release behavior and could extend drug release for up to 24 h.Differential scanning calorimetry(DSC)and Fourier transform infrared spectroscopy(FTIR)studies demonstrated that polyelectrolyte complexes(PECs)were formed on the tablet surface,which played an important role on retarding erosion and swelling of the matrix in the later stage.In conclusion,this study demonstrated that it is possible to develop highly water-soluble drugs loaded extendedrelease tablets using chitosaneanionic polymers based system.

Enhanced electrode kinetics and properties via anionic regulation in polyanionic Na_(3+x)V_(2)(PO_(4))_(3-x)(P_(2)O_(7))_(x) cathode material

Mixing polyanion cathode materials are promising candidates for the development of next-generation batteries, owing to their structural robustness and low-volume changes, yet low conductivity of polyanion hinders their practical capacity. Herein, the anion-site regulation is proposed to elevate the electrode kinetics and properties of polyanionic cathode. Multivalent anion P_(2)O_(7)^(4-) is selected to substitute the PO_(4)^(3-) in Na_(3)V_(2)(PO_(4))_(3) (NVP) lattice and regulate the ratio of polyanion groups to prepare Na_(3+x)V_(2)(PO_(4))_(3-x)(P_(2)O_(7))_(x)(NVPP_(x), 0 ≤ x ≤ 0.15) materials.The optimal Na_(3.1)V_(2)(PO_(4))_(2.9)(P_(2)O_(7))_(0.1) (NVPP_(0.1)) material can deliver remarkably elevated specific capacity(104 mAh g^(-1) at 0.1 C, 60 mAh g^(-1) at 20 C, respectively), which is higher than those of NVP. Moreover, NVPP_(0.1) exhibits outstanding cyclic stability(91% capacity retention after 300 cycles at 1 C). Experimental analyses reveal that the regulation of anions improves the structure stability, increases the active Na occupancy in the lattice and accelerates the Na+migration kinetics. The strategy of anion-site regulation provides the researchers a reference for the design of new high-performance polyanionic materials.

Removal of anionic ions from single material solution by bauxite tailings modified with FeCl_3·6H_2O

The adsorbabilities of the unmodified and modified bauxite tailings for Cr（Ⅵ）, As（Ⅴ） and F（Ⅰ） ions were investigated. Batch experiments were carried out to determine the removal rate as a function of adsorbent dosage, solution pH value and shaking time. The results show that the maximum removal rates of Cr（Ⅵ）, As（Ⅴ） and F（Ⅰ ） are respectively 99%, 99% and 90% by using the modified bauxite tailings. The isoelectric point of the unmodified bauxite tailings is 3.6, and that of the modified bauxite tailings is 5.0, which shifts to lower pH values in Cr（Ⅵ） solution. This indicates a specific adsorption of the anionic species on the modified bauxite railings. A new band of Cr2O72 appears in the FTIR, showing that Cr（Ⅵ） is adsorbed on the modified bauxite railings in the form of chemistry adsorption. The adsorption data of Cr（Ⅵ） on the modified bauxite tailings are well described by Freundlich model. The investigations of kinetic models show that pseudo-second-order kinetic model provides the best correlation for the experimental data.