Sequential removal of selenium and tellurium from copper anode slime with high nickel content

A process using soda roasting-alkaline leaching-acid leaching to remove selenium, tellurium and copper sequentially from the copper anode slime with high content of Ni was tested. The mechanism of this process was outlined based on thermodynamic analysis and the change in the XRD patterns of different intermediate products. During soda roasting, copper which occurs as Cu4SeTe in the slime was oxidized to CuO and Cu3TeO6, while selenium and tellurium were oxidized to Ag2SeO4 and Cu3TeO6, respectively. Ag2SeO4 in the calcine is easily leached in the subsequent alkaline leaching, but CuTeO3 resulted from the decomposition of CCu3TeO6 remains inactive in this process through which selenium is leached out in preference to tellurium. The CuTeO3 and Cu O in the alkaline leaching residue can be leached in the following sulfuric acid leaching process. More than 97% of selenium was leached with little tellurium leached under the optimal condition. Then, more than 96% of copper and almost all the tellurium were leached out in the following acid leaching process.

Leaching kinetics of selenium from copper anode slimes by nitric acid-sulfuric acid mixture

The leaching kinetics of selenium from copper anode slimes was studied in a nitric acid?sulfuric acid mixture.The effects of main parameters on selenium leaching showed that the leaching rate of selenium was practically independent of stirring speed,while dependent on temperature and the concentrations of HNO3and H2SO4.The leaching of selenium includes two stages.The activation energy in the first stage is103.5kJ/mol,and the chemical reaction is the rate controlling step.It was almost independent of H2SO4concentration and dependent on HNO3concentration since the empirical reaction order with respect to HNO3concentration is0.5613.In the second stage,the activation energy is30.6kJ/mol,and the process is controlled by a mixture of diffusion and chemical reaction.The leaching of selenium was almost independent of HNO3concentration.

Intensification of pretreatment and pressure leaching of copper anode slime by microwave radiation

The application of microwave irradiation for pretreatment of copper anode slime with high nickel content prior to pressure sulfuric acid leaching has been proposed.The microwave-assisted pretreatment is a rapid and efficient process.Through the technology of microwave assisted pretreatment-pressure leaching of copper anode slime,copper,tellurium,selenium and nickel are almost completely recovered.Under optimal conditions,the leaching efficiencies of copper,tellurium,selenium and nickel are 97.12%,95.97%,95.37% and 93.90%,respectively.The effect of microwave radiation on the temperature of copper anode slime and leaching solution is investigated.It is suggested that the enhancement on the recoveries of copper,tellurium and selenium can be attributed to the temperature gradient which is caused by shallow microwave penetration depth and super heating occurring at the solid–liquid interface.The kinetic study shows that the pressure leaching of copper anode slime,with and without microwave assisted pretreatment,are both controlled by chemical reactions on the surfaces of particles.It is found that the activation energy calculated for microwave-assisted pretreatment-pressure leaching(49.47 kJ/mol) is lower than that for pressure leaching which is without microwave assisted pretreatment(60.57 kJ/mol).

Selective extraction of gold(Ⅲ) from hydrochloric acid-chlorine gas leach solutions of copper anode slime by tri-butyl phosphate(TBP)

The oxidative leaching causes to dissolve various impurities such as Fe, Cu, Pd, Se in copper anode slime. Organicextractant tri-butyl phosphate (TBP) was used to purify leach solution. Several parameters, such as TBP, HCl and chloride inorganicsalt concentrations were chosen in order to determine efficient state for impurities separation. Standard solvent extraction tests forextraction and separation of Au, Pd, Pt, Fe, Cu and Se were conducted with equal volume of aqueous and organic phases in batchexperiments. The effect of hydrochloric acid, organic phase and metals initial concentration were examined at ambient temperature. Itwas found that 0.25 mol/L TBP in the presence of 2.5 mol/L hydrochloric acid can cause high extraction of gold. Meanwhile, in theseconditions the extraction of other impurities is negligible. After extraction, pregnant organic phase was scrubbed by distilled waterand some impurities were removed. Finally, gold was stripped by sodium thiosulfate solution. The stripping solution does not haveany impurities. By adding H2SO4 to stripping solution containing Na2S2O2, SO2 gas is released and Au3+ ions could be reduced.

Ultra fast microwave-assisted leaching for the recovery of copper and tellurium from copper anode slime

The decomposition of copper anode slime heated by microwave energy in a sulfuric acid medium was investigated. Leaching experiments were carried out in a multi-mode cavity with microwave assistance. The leaching process parameters were optimized using response surface methodology（RSM）. Under the optimized conditions, the leaching efficiencies of copper and tellurium were 99.56% ± 0.16% and 98.68% ± 0.12%, respectively. Meanwhile, a conventional leaching experiment was performed in order to evaluate the influence of microwave radiation. The mechanism of microwave-assisted leaching of copper anode slime was also investigated. In the results, the microwave technology is demonstrated to have a great potential to improve the leaching efficiency and reduce the leaching time. The enhanced recoveries of copper and tellurium are believed to result from the presence of a temperature gradient due to the shallow microwave penetration depth and the superheating at the solid-liquid interface.

Ag recovery from copper anode slime by acid leaching at atmospheric pressure to synthesize silver nanoparticles

In this paper, recovery of silver from anode slime of Sarcheshmeh copper complex in lran and subsequent synthesis of silver nanoparticles from leaching solution is investigated. Sarcheshmeh anode slime is mainly consisted ofCu, Ag, Pb and Se. Amount of Ag in the considered anode slime was 5.4% （by weight）. The goal was to recover as much as possible Ag from anode slime at atmospheric pressure to synthesize Ag nanoparticles. Therefore, acid leaching was used for this purpose. The anode slime was leached with sulfuric and nitric acid from room to 90 ~C at different acid concentrations and the run which yielded the most recovery of Ag was selected for Ag nanoparticles synthesis. At this condition, Cu, Pb and Se are lea- ched as well as Ag. To separate Ag from leach solution HCI was added and silver was precipitated as AgCl which were then dissolved by ammonia solution. The Ag nanoparticles are synthesized from this solution by chemical reduction method by aid of sodium borohydride in the presence of PVP and PEG as stabilizers. The synthesized Ag nanoparticles showed a peak of 394 nm in UV-vis spectrum and TEM images showed a rather uniform Ag nanoparticles of 12 nm.

镍精矿除铜的单纯形优化

本文简要叙述了单纯形优化的基本思想与寻优步骤。应用单纯形法对镍精矿—阳极泥—镍电解阳极液反应体系的深度除铜条件进行了寻优试验,其结果与前人的试验及工业实践基本相同,表明单纯形优化方法是确定多变量湿法冶金体系中某些重要因素的一种快速而简单的方法。

Selenium(Ⅵ) removal from caustic solution by synthetic Ca-Al-Cl layered double hydroxides

To extract selenium(Ⅵ)from the highly caustic leachate of copper anode slime,the Ca-Al-Cl layered double hydroxides(Ca-Al-Cl-LDHs)with a formula of Ca2 Al(OH)6 Cl·2 H2 O by three co-precipitation methods were synthesized.A plate-like morphology and hexagonal crystal structure with typical mineral phases and functional groups were identified by the FESEM,XRD,FTIR,BET and XPS analysis.The forward feeding sample exhibits the best adsorption capacity of Se(Ⅵ).The factor experiments then reveal a favorable adsorption process with low temperature,low NaOH concentration and high adsorbent dosage.Furthermore,the adsorption kinetics and isotherm parameters can be well described by the Langmuir isotherm and the pseudo-second-order models,respectively.Accordingly,the maximum adsorption amount of Se(Ⅵ)onto Ca-Al-Cl-LDHs reaches188.6 mg/g at 50 ℃.

Facile fabrication of ZnO-CuO porous hybrid microspheres as lithium ion battery anodes with enhanced cyclability

ZnO–CuO porous hybrid microspheres were successfully produced through a facile aging process of zinc citrate solid microspheres in copper sulfate solution combined with the subsequent annealing treatment in air atmosphere. The electrochemical performance investigation suggests that the harvested ZnO–CuO porous hybrid microspheres illustrate much higher specific capacity and better cycling stability than single ZnO counterparts. A reversible capacity of 585 mAh·g^-1 can be acquired for ZnO–CuO porous hybrid microspheres after cycling 500 times at a current density of 200 mA·g^-1. The porous configuration and the incorporation of CuO are responsible for the enhanced lithium storage properties of ZnO–CuO hybrids.