Preparation and particle size characterization of Cu nanoparticles prepared by anodic arc plasma

Copper nanoparticles were successfully prepared in large scale by means of anodic arc discharging plasma method in inert atmosphere. The particle size, specific surface area, crystal structure, and morphology of the samples were characterized by X-ray diffraction （XRD）, BET equation, transmission electron microscopy （TEM）, and the corresponding selected area electron diffraction （SAED）. The experimental results indicate that the crystal structure of the samples is fcc structure the same as that of the bulk materials. The specific surface area is 11 m^2/g, the particle size distribution is 30 to 90 nm, and the average particle size is about 67 nm obtained from TEM and confirmed from XRD and BET results. The nanoparticles with uniform size, high purity, narrow size distribution and spherical shape can be prepared by this convenient and effective method.

PARTICLE SIZE AND MICROSTRUCTURE OF Ni NANOPOWDERS PREPARED BY ANODIC ARC PLASMA

Pure Ni nanopowders were successfully prepared by the method of anodic arc disch arged plasma with homemade experimental apparatus. The particle size, mircostruc ture and morphology of the particles by this process were characterized via X-ra y powder diffraction (XRD), transmission electron microscopy (TEM) and the corre sponding selected area electron diffraction (SAED); The specific surface area an d pore parameters were investigated by multi-point full analysis of nitrogen ads orption-desorption isotherms at 77K by Brunauer- Emmett-Teller (BET) surface are a analyzer; The chemical composition were determined by X-ray energy dispersive spectrometry (XEDS) equipped in SEM and element analyze instrument. The experime nt results indicate that the samples by this method with high purity,the crystal structure of the particles is as same as the bulk material, is fcc structure, w ith average particle sizes about 47nm, ranging from 20 to 70nm, and distributed uniformly in spherical chain shapes, the specific surface areavis 14.23m2/g, po re volume of pore is 0.09cm3/g and average pore diameter is 23nm.

Volt-ampere characteristics of a nitrogen DC plasma arc with anode melting

The characteristics of a nitrogen arc using a graphite cathode and a melting anode in a pilot-scale plasma furnace are investigated. The voltage is examined as a function of current and apparent plasma length. The voltage increases non-linearly with the increase of apparent plasma length, with the current fixed. The experimental data so obtained are compared with the predictions of the Bowman model for the electric arc, and with numerical simulations as well. The level of agreement between the experimental data at the melting anode and the numerical predictions confirms the suitability of the proposed the Bowman model. These characteristics are relevant to the engineering design and evaluation of a DC plasma furnace and reactor for the treatment of hazardous fly ash waste.