The aluminum-air battery is considered to be an attractive candidate as a power source for electric vehicles(EVs) because of its high theoretical energy density(8100 Wh kg^(-1)), which is significantly greater than th...The aluminum-air battery is considered to be an attractive candidate as a power source for electric vehicles(EVs) because of its high theoretical energy density(8100 Wh kg^(-1)), which is significantly greater than that of the state-of-the-art lithium-ion batteries(LIBs). However,some technical and scientific problems preventing the large-scale development of Al-air batteries have not yet to be resolved. In this review, we present the fundamentals, challenges and the recent advances in Al-air battery technology from aluminum anode, air cathode and electrocatalysts to electrolytes and inhibitors. Firstly, the alloying of aluminum with transition metal elements is reviewed and shown to reduce the selfcorrosion of Al and improve battery performance. Additionally for the cathode, extensive studies of electrocatalytic materials for oxygen reduction/evolution including Pt and Pt alloys, nonprecious metal catalysts, and carbonaceous materials at the air cathode are highlighted.Moreover, for the electrolyte, the application of aqueous and nonaqueous electrolytes in Al-air batteries are discussed. Meanwhile, the addition of inhibitors to the electrolyte to enhance electrochemical performance is also explored. Finally, the challenges and future research directions are proposed for the further development of Al-air batteries.展开更多
Aluminum(Al) metal has been regarded as a promising anode for rechargeable batteries because of its natural abundance and high theoretical specific capacity. However, rechargeable aluminum batteries(RABs) using A1 met...Aluminum(Al) metal has been regarded as a promising anode for rechargeable batteries because of its natural abundance and high theoretical specific capacity. However, rechargeable aluminum batteries(RABs) using A1 metal as anode display poor cycling performances owing to interface problems between anode and electrolyte. The solid-electrolyte interphase(SEI) layer on the anode has been confirmed to be essential for improving cycling performances of rechargeable batteries. Therefore, we immerse the Al metal in ionic liquid electrolyte for some time before it is used as anode to remove the passive film and expose fresh Al to the electrolyte. Then the reactions of exposed Al, acid, oxygen and water in electrolyte are occurred to form an SEI layer in the cycle. Al/electrolyte/V_2 O_5 full batteries with the thin, uniform and stable SEI layer on Al metal anode perform high discharge capacity and coulombic efficiency(CE). This work illustrates that an SEI layer is formed on Al metal anode in the cycle using a simple and effective pretreatment process and results in superior cycling performances for RABs.展开更多
ZnFe 2O 4 and ZnFe 2O 4 based materials were tested to obtain the electrical conductivity and corrosion resistance in melting bath for aluminum electrolysis. The results proved that adequate additives, such as Ni 2O 3...ZnFe 2O 4 and ZnFe 2O 4 based materials were tested to obtain the electrical conductivity and corrosion resistance in melting bath for aluminum electrolysis. The results proved that adequate additives, such as Ni 2O 3 CuO, Cu, ZnO and CeO 2 would increase the electrical conductivity, and the ZnFe 2O 4 based anodes with these additives were of good corrosion resistance. The current density on anode, the mole ratio of NaF/AlF 3 (MR) and the content of alumina in the bath effect the anode corrosion rate in different way.展开更多
A new Fe Pt nanostructure with stripe-like patterns has been prepared by direct current(DC) magnetron sputtering on anodic aluminum oxide(AAO) templates. AAO templates anodized under low voltages(7 V) demonstrat...A new Fe Pt nanostructure with stripe-like patterns has been prepared by direct current(DC) magnetron sputtering on anodic aluminum oxide(AAO) templates. AAO templates anodized under low voltages(7 V) demonstrate self-organized,maze-like patterns, different from the conventional porous structures obtained at high voltages. Fe Pt thin films deposited on such templates tend to replicate the morphology of the templates. Although there is no obvious spatial ordering, the dimensions of the Fe Pt nano-stripes are highly uniform, due to the constrained growth along the transverse direction of the AAO pattern. The magnetic properties are strongly influenced by this unique morphology. While continuous films demonstrate strong exchange coupling, the dominant interaction in Fe Pt nano-stripes with the same nominal thickness is magnetostatic. The morphology also dictates the magnetization reversal behaviors, with thin films dominated by domain nucleation; while nano-stripes incline to reverse their magnetization by spin rotation. Our work demonstrates that selforganized AAO templates can be used to control the morphology and magnetic behavior of Fe Pt materials.展开更多
CNT-added surface treatment (CAST) is a newly developed technology that incorporates single-walled carbon nanotubes (SWCNTs) into a metal surface through alternate current electrolysis using a dispersion of SWCNTs in ...CNT-added surface treatment (CAST) is a newly developed technology that incorporates single-walled carbon nanotubes (SWCNTs) into a metal surface through alternate current electrolysis using a dispersion of SWCNTs in an alkaline aqueous solution. We apply this method to Al-plates and characterize their surface morphology and components through scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy. After CAST processing, protrusion structures of Al-oxide containing SWCNTs are formed on the surface of the Al-plate, and the surface morphology differs significantly from that of the surface of Al films treated through conventional anodic oxidation. The height and spacing of the protrusion structures formed on the surface of the CAST-treated Al-plates are 100 - 200 nm and 50 - 100 nm, respectively. In addition, we investigate the formation mechanism of the protrusion structure by applying a DC voltage between the working electrode (Al-plate) and a counter electrode immersed in a dispersion of SWCNTs in an alkaline aqueous solution. Comparing the Al-plate surface after treatment under both current directions, we propose a model for the formation process of protrusion structures containing SWCNTs based on catalyst surface etching.展开更多
Ni nanowires were prepared by electrodeposition in porous anodized aluminum oxide (AAO) template from a composite electrolyte solution. Well-ordered Ni nanowire arrays with controllable length were then made by the ...Ni nanowires were prepared by electrodeposition in porous anodized aluminum oxide (AAO) template from a composite electrolyte solution. Well-ordered Ni nanowire arrays with controllable length were then made by the partial removal of AAO using a mixture of phosphoric acid and chromic acid (6 wt pct H3PO4:1.8 wt pct H3CrO4). The images of Ni nanowire arrays were studied by scanning electron microscopy (SEM) to determine the relationship between etching time and the length of Ni nanowire arrays. The results indicate that the length of nanowires exposed from the template can be accurately controlled by controlling etching time.展开更多
The synthesis of Pd-Ag alloy nanowires in nanopores of porous anodic aluminum oxide (AAO) template by electrochemical deposition technique was reported. Pd-Ag alloy nanowires with 16%-25% Ag content are expected to ...The synthesis of Pd-Ag alloy nanowires in nanopores of porous anodic aluminum oxide (AAO) template by electrochemical deposition technique was reported. Pd-Ag alloy nanowires with 16%-25% Ag content are expected to serve as candidates of useful nanomaterials for the hydrogen sensors. Scanning electron microscopy (SEM) and energy dispersed X-ray spectroscopy (EDX) were employed to characterize the morphologies and compositions of the Pd-Ag nanowires. X-ray diffraction (XRD) was used to characterize the phase properties of the Pd-Ag nanowires. Pd-Ag alloy nanowire arrays with 17.28%-23.76% Ag content have been successfully fabricated by applying potentials ranging from -0.8 to -1.0 V (vs SCE). The sizes of the alloy nanowires are in agreement with the diameter of AAO nanopores. The underpotential deposition of Ag+ on Pd and Au plays an important role in producing an exceptionally high Ag content in the alloy. Alloy compositions can still be controlled by adjusting the ion concentration ratio of Pd^2+ and Ag+ and the electrodeposition processes. XRD shows that nanowires obtained are in the form of alloy of Pd and Ag.展开更多
A novel soft polymer template containing a double-layer structure,which includes a thin layer of polymethylmethacrylate(PMMA)used as a pattern layer and a thicker layer of polydimethylsiloxane(PDMS)used as a back laye...A novel soft polymer template containing a double-layer structure,which includes a thin layer of polymethylmethacrylate(PMMA)used as a pattern layer and a thicker layer of polydimethylsiloxane(PDMS)used as a back layer,was fabricated from a replica molding process.Anodic aluminum oxide(AAO)template was used as the replica mold to be replicated to the polymethylmethacrylate layer by a thermal infiltration process under a vacuum condition.Results indicate that PMMA/PDMS soft templates with different sizes could be easily fabricated from the as-prepared AAO replica mold.The PMMA/PDMS soft templates were then employed to imprint a TiO_2 gel for achieving TiO_2 nano-pore arrays.After the imprinting process,the PDMS layer was firstly peeled off and the PMMA layer was then removed into acetonitrile,which can avoid any demolding problems like damages or distortions.The TiO_2 nano-pore arrays with the crystalline of anatase could be obtained at a heat treatment temperature of 450°C.展开更多
We report an effective enhancement in light extraction of Ga N-based light-emitting diodes(LEDs) with an Al-doped Zn O(AZO) transparent conductive layer by incorporating a top regular textured SiO2 layer. The 2 in...We report an effective enhancement in light extraction of Ga N-based light-emitting diodes(LEDs) with an Al-doped Zn O(AZO) transparent conductive layer by incorporating a top regular textured SiO2 layer. The 2 inch transparent throughpore anodic aluminum oxide(AAO) membrane was fabricated and used as the etching mask. The periodic pore with a pitch of about 410 nm was successfully transferred to the surface of the SiO2 layer without any etching damages to the AZO layer and the electrodes. The light output power was enhanced by 19% at 20 m A and 56% at 100 m A compared to that of the planar LEDs without a patterned surface. This approach offers a technique to fabricate a low-cost and large-area regular pattern on the LED chip for achieving enhanced light extraction without an obvious increase of the forward voltage.展开更多
Anodic bonding of glass to Kovar alloy coated with Al film (Glass Al film/Kovar) was performed in the temperature range of 513 ~ 713?K under the static electric voltage of 500?V in order to investigate the interfacia...Anodic bonding of glass to Kovar alloy coated with Al film (Glass Al film/Kovar) was performed in the temperature range of 513 ~ 713?K under the static electric voltage of 500?V in order to investigate the interfacial phenomena of Al glass joint. The results reveal that Na and K ions within the glass are displaced by the applied field from the anode side surface of the glass to form depletion layers of them. The K ion depletion layer is narrow and followed by a K pile up layer, and both the two layers are formed within the Na depletion layer. The width of the Na and K depletion layers is increased with increasing bonding temperature and time. The activation energies for the growth of both depletion layers were close to that for Na diffusion in the glass. TEM observations reveal that Al film coated at the surface of Kovar alloy is oxidized to amorphous Al 2O 3 containing a few of Fe, Ni and Co by oxygen ions from the glass drifted by high electric field during bonding. The amount of Fe ions diffusing into the glass adjacent to the anode is significantly low due to the presence of Al film between Kovar alloy and the glass. As a result, the amorphous reaction layer of Fe Si O in the glass near the interface is avoided which is formed in Kovar glass joints.展开更多
Recently, individual reduced-symmetry metal nanostructures and their plasmonic properties have been studied extensively. However, little attention has been paid to the approach to fabricating ordered reduced-symmetry ...Recently, individual reduced-symmetry metal nanostructures and their plasmonic properties have been studied extensively. However, little attention has been paid to the approach to fabricating ordered reduced-symmetry metal nanostructure arrays. In this paper, a novel perforated silver nanocap array with high surface-enhanced Raman scattering (SERS) activity and fluorescence suppression is reported. The array is fabricated by electron beam evaporating Ag onto the perforated barrier layer side of a hard anodization (HA) anodic aluminum oxide (AAO) template. The morphology and optical property of the perforated silver nanocap array are characterized by an atomic force microscope (AFM), a scanning electron microscope (SEM), and absorption spectra. The results of SERS measurements reveal that the perforated silver nanocap array offers high SERS activity and fluorescence suppression compared with an imperforated silver nanocap array.展开更多
To study the effect of different deposition temperatures on the optical properties of porous SiC films,single crystal Si was used as the substrate,a layer of anodic aluminum oxide(AAO)film was transferred on the Si su...To study the effect of different deposition temperatures on the optical properties of porous SiC films,single crystal Si was used as the substrate,a layer of anodic aluminum oxide(AAO)film was transferred on the Si substrate by chemical method,and then a layer of SiC was deposited on anodic aluminum oxide(AAO)template to prepare porous fluorescent SiC film by magnetron sputtering.The deposition temperature was ranged from 373 to 873 K.The thickness of the porous SiC film coated on the AAO surface was around 283 nm.It is found that the porous SiC with the deposition temperature of 873 K has the strongest photoluminescence(PL)intensity excited by 375 nm laser.The time-resolved PL spectra prove that the PL is mainly from intrinsic light emitting of SiC.With the optimized process,porous amorphous SiC film may have potential applications in the field of warm white LEDs.展开更多
AlNbO_4,as lithium-ion batteries(LIBs) anode,has a high theoretical capacity of 291.5 m Ah g^-1.Here,AlNbO_4 anode materials were synthesized through a simple solid-state method.The structure,morphology and electroc...AlNbO_4,as lithium-ion batteries(LIBs) anode,has a high theoretical capacity of 291.5 m Ah g^-1.Here,AlNbO_4 anode materials were synthesized through a simple solid-state method.The structure,morphology and electrochemical performances of AlNbO4 anode were systematically investigated.The results show that AlNbO4 is monoclinic with C2/m space group.The scanning electron microscopy(SEM) and transmission electron microscopy(TEM) characterizations reveal the AlNbO_4 particles with the size of 100 nm^–2 lm.As a lithium-ion batteries anode,AlNbO4 delivers a high reversible capacity and good rate capability.The discharge capacity is as high as 151.0 m Ah g^-1 after 50 charge and discharge cycles at 0.1 C corresponding to capacity retention of 90.7 %.When the current density increases to 5.0C,AlNbO4 anode displays reversible discharge capacity of 73.6 m Ah g^-1 at the50 th cycle.展开更多
Silver nanorod arrays have been fabricated by alternat-ing current(AC) and pulsed direct current(DC) electrodeposition in porous anodic aluminum oxide(AAO) templates with controlled pore diameters of 19,38,and 6...Silver nanorod arrays have been fabricated by alternat-ing current(AC) and pulsed direct current(DC) electrodeposition in porous anodic aluminum oxide(AAO) templates with controlled pore diameters of 19,38,and 65 nm,respectively.The variation of their optical absorption properties with the incident angle and the nanorods length(corresponding to the electrodeposition time) has been investigated.Optical absorption spectra show that the posi-tion of longitudinal surface plasmon resonance(LSPR) peak has a small blueshift with the increase of incident angle of the excitation light.While the aspect ratio of the nanorods increases,the position of LSPR peak first redshifts and then blueshifts to a certain wave-length.Furthermore,the position of LSPR peak can be tuned,ranging from 550 nm to 900 nm,which makes it possible to cou-ple various wavelength of excitation source to assist radiative en-ergy transfer to the acceptor.展开更多
A simple, cost effective and rapid electrochemical method has been developed for the determination of micro level ortho nitrobenzaldehyde(ONB) based on outstanding properties of modified aluminum electrode tin nanor...A simple, cost effective and rapid electrochemical method has been developed for the determination of micro level ortho nitrobenzaldehyde(ONB) based on outstanding properties of modified aluminum electrode tin nanorods/anodic aluminum oxide/aluminum(SnNR/AAO/Al) for the first time. The SnNR/AAO/Al electrode was fabricated by a second step anodization, followed by electrodeposition and its electrochemical behavior was investigated in detail. The cyclic voltammetry results indicated that the SnNR/AAO/Al electrode exhibited efficient electrocatalytic activity toward reduction of ONB in the acidic solution. It provides an appreciable improvement of reduction peak for ONB at-0.721 V.Furthermore, various kinetic parameters such as transfer electron number, transfer proton number and standard heterogeneous rate constant were calculated from the scan rates.The electrocatalytic behavior was further exploited as a sensitive detection scheme for the ONB determination by differential pulse voltammetry. Under the optimized conditions, the concentration range and detection limit are 0.1-100 μmol/L and 0.05 μmol/L, respectively,for ONB. The analytical performance of this modified sensor has been evaluated for detection of real sample such as river water and recovery of ONB was achieved all-out up to102.3% under standard addition method.展开更多
Although surface-enhanced Raman spectroscopy(SERS)substrates have achieved high sensitivity,it is still difficult to apply these SERS protocols to the on-site detection of real samples due to the SERS substrate being ...Although surface-enhanced Raman spectroscopy(SERS)substrates have achieved high sensitivity,it is still difficult to apply these SERS protocols to the on-site detection of real samples due to the SERS substrate being fabrication-complexed,unstable,reproducible,or unable to be applied in batch production.Here,a large-scale ordered two-dimensional array of Au nano-hemispheres was developed through electron beam vaporization of Au onto the easy-available commercialized anodic aluminum oxide(AAO)template with two-layer nanostructures of different diameters.The uniform Au nano-hemisphere is reliable for SERS detection of malachite green(MG)due to the relative standard deviation(RSD)of the SERS intensities at different locations less than 10%.With the optimized excitation wavelength,solvent effect and pH environment,the linear range of MG detection spans from 10^(-10) to 10^(-6) mol/L with a limit of detection(LOD)of 4×10^(-10) mol/L.The enhancement factor can reach 1.2×10^(6).After extraction with acetonitrile and dichloromethane,MG in the spiked tilapia was detected with satisfactory recovery.The results indicate that the Au nano-hemisphere array can be expected to greatly facilitate SERS practical applications in detecting harmful food additives and chemicals due to the advantages of chemical inertness,physical robustness,simple fabrication,controllability,large-area uniformity,and large-batch production.展开更多
The spatial structures of magnetic Co nanowire array embedded in anodic aluminium membranes were investigated by grazing incidence small angle X-ray scattering (GISAXS) and conventional small angle X-ray scattering ...The spatial structures of magnetic Co nanowire array embedded in anodic aluminium membranes were investigated by grazing incidence small angle X-ray scattering (GISAXS) and conventional small angle X-ray scattering (SAXS) techniques. Compared with SEM observation, the GISAXS and SAXS measurements can get more overall structural information in a large-area scale. In this study, the two-dimensional GISAXS pattern was well reconstructed by using the IsGISAXS program. The results demonstrate that the hexagonal lattice formed by the Co nanowires is distorted (a ≈105 nm, b ≈95 nm). These Co nanowires are isolated into many structure domains with different orientations with a size of about 2 p_m. The SAXS results have also confirmed that the nanopore structures in the AAM can be retained after depositing Co nanowires although the Co nanowires can not completely but only just fill up the nanopores. These results are helpful for understanding the global structure of the Co nanowire array.展开更多
An electroless deposition(ELD) method is introduced to fabricate a metal nanoplug for its advantages of simplicity,low cost and auto-selectivity.It was demonstrated that nanoplugs of less than 50 nm in diameter can ...An electroless deposition(ELD) method is introduced to fabricate a metal nanoplug for its advantages of simplicity,low cost and auto-selectivity.It was demonstrated that nanoplugs of less than 50 nm in diameter can be fabricated by ELD nickel on various substrates,such as silicon,tungsten and titanium nitride.The main composition of the ELD nanoplug was characterized as nickel by an energy dispersive X-ray microanalyzer.A functional vertical phase-change random access memory(PCRAM) device with a heater diameter of around 9μm was fabricated by using the ELD method.TheⅠ-Ⅴcharacteristics demonstrated that the threshold current is only 90.8μA.This showed that the ELD process can satisfy the demands of PCRAM device application,as well as device performance improvement.The ELD process provides a promising method for the simple and low-cost fabrication of metal nanoplugs.展开更多
基金This work has been carried out with the support of The Chinese Postdoctoral Science FundThe Special Funds for the Major State Basic Research Projects G19990650.
基金supported by Natural Sciences and Engineering Research Council of Canada (NSERC)Canada Research Chair (CRC) Program+1 种基金National Nature Science Foundation of China (No.51474255)Open-End Fund for the Graduate Student Research Innovation Project of Hunan Province (No. 150140008)
文摘The aluminum-air battery is considered to be an attractive candidate as a power source for electric vehicles(EVs) because of its high theoretical energy density(8100 Wh kg^(-1)), which is significantly greater than that of the state-of-the-art lithium-ion batteries(LIBs). However,some technical and scientific problems preventing the large-scale development of Al-air batteries have not yet to be resolved. In this review, we present the fundamentals, challenges and the recent advances in Al-air battery technology from aluminum anode, air cathode and electrocatalysts to electrolytes and inhibitors. Firstly, the alloying of aluminum with transition metal elements is reviewed and shown to reduce the selfcorrosion of Al and improve battery performance. Additionally for the cathode, extensive studies of electrocatalytic materials for oxygen reduction/evolution including Pt and Pt alloys, nonprecious metal catalysts, and carbonaceous materials at the air cathode are highlighted.Moreover, for the electrolyte, the application of aqueous and nonaqueous electrolytes in Al-air batteries are discussed. Meanwhile, the addition of inhibitors to the electrolyte to enhance electrochemical performance is also explored. Finally, the challenges and future research directions are proposed for the further development of Al-air batteries.
基金supported by the National Basic Research Program of China (No. 2015CB251100)the Program for New Century Excellent Talents in University (NCET-13-0033)+1 种基金the Beijing Co-construction Project (No. 20150939014)the Beijing Higher Institution Engineering Research Center of Power Battery and Chemical Energy Materials
文摘Aluminum(Al) metal has been regarded as a promising anode for rechargeable batteries because of its natural abundance and high theoretical specific capacity. However, rechargeable aluminum batteries(RABs) using A1 metal as anode display poor cycling performances owing to interface problems between anode and electrolyte. The solid-electrolyte interphase(SEI) layer on the anode has been confirmed to be essential for improving cycling performances of rechargeable batteries. Therefore, we immerse the Al metal in ionic liquid electrolyte for some time before it is used as anode to remove the passive film and expose fresh Al to the electrolyte. Then the reactions of exposed Al, acid, oxygen and water in electrolyte are occurred to form an SEI layer in the cycle. Al/electrolyte/V_2 O_5 full batteries with the thin, uniform and stable SEI layer on Al metal anode perform high discharge capacity and coulombic efficiency(CE). This work illustrates that an SEI layer is formed on Al metal anode in the cycle using a simple and effective pretreatment process and results in superior cycling performances for RABs.
文摘ZnFe 2O 4 and ZnFe 2O 4 based materials were tested to obtain the electrical conductivity and corrosion resistance in melting bath for aluminum electrolysis. The results proved that adequate additives, such as Ni 2O 3 CuO, Cu, ZnO and CeO 2 would increase the electrical conductivity, and the ZnFe 2O 4 based anodes with these additives were of good corrosion resistance. The current density on anode, the mole ratio of NaF/AlF 3 (MR) and the content of alumina in the bath effect the anode corrosion rate in different way.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.51025101,51101095,61434002,11274214,and 51301099)the Program of"One Hundred Talented People"of Shanxi Province,China
文摘A new Fe Pt nanostructure with stripe-like patterns has been prepared by direct current(DC) magnetron sputtering on anodic aluminum oxide(AAO) templates. AAO templates anodized under low voltages(7 V) demonstrate self-organized,maze-like patterns, different from the conventional porous structures obtained at high voltages. Fe Pt thin films deposited on such templates tend to replicate the morphology of the templates. Although there is no obvious spatial ordering, the dimensions of the Fe Pt nano-stripes are highly uniform, due to the constrained growth along the transverse direction of the AAO pattern. The magnetic properties are strongly influenced by this unique morphology. While continuous films demonstrate strong exchange coupling, the dominant interaction in Fe Pt nano-stripes with the same nominal thickness is magnetostatic. The morphology also dictates the magnetization reversal behaviors, with thin films dominated by domain nucleation; while nano-stripes incline to reverse their magnetization by spin rotation. Our work demonstrates that selforganized AAO templates can be used to control the morphology and magnetic behavior of Fe Pt materials.
文摘CNT-added surface treatment (CAST) is a newly developed technology that incorporates single-walled carbon nanotubes (SWCNTs) into a metal surface through alternate current electrolysis using a dispersion of SWCNTs in an alkaline aqueous solution. We apply this method to Al-plates and characterize their surface morphology and components through scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy. After CAST processing, protrusion structures of Al-oxide containing SWCNTs are formed on the surface of the Al-plate, and the surface morphology differs significantly from that of the surface of Al films treated through conventional anodic oxidation. The height and spacing of the protrusion structures formed on the surface of the CAST-treated Al-plates are 100 - 200 nm and 50 - 100 nm, respectively. In addition, we investigate the formation mechanism of the protrusion structure by applying a DC voltage between the working electrode (Al-plate) and a counter electrode immersed in a dispersion of SWCNTs in an alkaline aqueous solution. Comparing the Al-plate surface after treatment under both current directions, we propose a model for the formation process of protrusion structures containing SWCNTs based on catalyst surface etching.
基金This work was supported by the National Natural Science Foundation of China under grant No.50473012.
文摘Ni nanowires were prepared by electrodeposition in porous anodized aluminum oxide (AAO) template from a composite electrolyte solution. Well-ordered Ni nanowire arrays with controllable length were then made by the partial removal of AAO using a mixture of phosphoric acid and chromic acid (6 wt pct H3PO4:1.8 wt pct H3CrO4). The images of Ni nanowire arrays were studied by scanning electron microscopy (SEM) to determine the relationship between etching time and the length of Ni nanowire arrays. The results indicate that the length of nanowires exposed from the template can be accurately controlled by controlling etching time.
基金supported by the National Natural Science Foundation of China under Grant No.20373015the Hunan Education Office under Grant No.04C033.
文摘The synthesis of Pd-Ag alloy nanowires in nanopores of porous anodic aluminum oxide (AAO) template by electrochemical deposition technique was reported. Pd-Ag alloy nanowires with 16%-25% Ag content are expected to serve as candidates of useful nanomaterials for the hydrogen sensors. Scanning electron microscopy (SEM) and energy dispersed X-ray spectroscopy (EDX) were employed to characterize the morphologies and compositions of the Pd-Ag nanowires. X-ray diffraction (XRD) was used to characterize the phase properties of the Pd-Ag nanowires. Pd-Ag alloy nanowire arrays with 17.28%-23.76% Ag content have been successfully fabricated by applying potentials ranging from -0.8 to -1.0 V (vs SCE). The sizes of the alloy nanowires are in agreement with the diameter of AAO nanopores. The underpotential deposition of Ag+ on Pd and Au plays an important role in producing an exceptionally high Ag content in the alloy. Alloy compositions can still be controlled by adjusting the ion concentration ratio of Pd^2+ and Ag+ and the electrodeposition processes. XRD shows that nanowires obtained are in the form of alloy of Pd and Ag.
基金supported by the Ministry of Science and Technology of China through 863-project under grant 2009AA03Z218the Major Program of the National Natural Science Foundation of China under Grant No.90923012the Research Fund for the Doctoral Program of Higher Education of China under grant 200806980023
文摘A novel soft polymer template containing a double-layer structure,which includes a thin layer of polymethylmethacrylate(PMMA)used as a pattern layer and a thicker layer of polydimethylsiloxane(PDMS)used as a back layer,was fabricated from a replica molding process.Anodic aluminum oxide(AAO)template was used as the replica mold to be replicated to the polymethylmethacrylate layer by a thermal infiltration process under a vacuum condition.Results indicate that PMMA/PDMS soft templates with different sizes could be easily fabricated from the as-prepared AAO replica mold.The PMMA/PDMS soft templates were then employed to imprint a TiO_2 gel for achieving TiO_2 nano-pore arrays.After the imprinting process,the PDMS layer was firstly peeled off and the PMMA layer was then removed into acetonitrile,which can avoid any demolding problems like damages or distortions.The TiO_2 nano-pore arrays with the crystalline of anatase could be obtained at a heat treatment temperature of 450°C.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61204049 and 51402366)Guangdong Natural Science Foundation,China(Grant No.S2012040007363)Foundation for Distinguished Young Talents in Higher Education of Guangdong,China(Grant Nos.2012LYM 0058 and2013LYM 0022)
文摘We report an effective enhancement in light extraction of Ga N-based light-emitting diodes(LEDs) with an Al-doped Zn O(AZO) transparent conductive layer by incorporating a top regular textured SiO2 layer. The 2 inch transparent throughpore anodic aluminum oxide(AAO) membrane was fabricated and used as the etching mask. The periodic pore with a pitch of about 410 nm was successfully transferred to the surface of the SiO2 layer without any etching damages to the AZO layer and the electrodes. The light output power was enhanced by 19% at 20 m A and 56% at 100 m A compared to that of the planar LEDs without a patterned surface. This approach offers a technique to fabricate a low-cost and large-area regular pattern on the LED chip for achieving enhanced light extraction without an obvious increase of the forward voltage.
文摘Anodic bonding of glass to Kovar alloy coated with Al film (Glass Al film/Kovar) was performed in the temperature range of 513 ~ 713?K under the static electric voltage of 500?V in order to investigate the interfacial phenomena of Al glass joint. The results reveal that Na and K ions within the glass are displaced by the applied field from the anode side surface of the glass to form depletion layers of them. The K ion depletion layer is narrow and followed by a K pile up layer, and both the two layers are formed within the Na depletion layer. The width of the Na and K depletion layers is increased with increasing bonding temperature and time. The activation energies for the growth of both depletion layers were close to that for Na diffusion in the glass. TEM observations reveal that Al film coated at the surface of Kovar alloy is oxidized to amorphous Al 2O 3 containing a few of Fe, Ni and Co by oxygen ions from the glass drifted by high electric field during bonding. The amount of Fe ions diffusing into the glass adjacent to the anode is significantly low due to the presence of Al film between Kovar alloy and the glass. As a result, the amorphous reaction layer of Fe Si O in the glass near the interface is avoided which is formed in Kovar glass joints.
基金Project supported by the Industry Key Technologies R & D Project in Shaanxi Province of China (Grant No. 2012K07-19)
文摘Recently, individual reduced-symmetry metal nanostructures and their plasmonic properties have been studied extensively. However, little attention has been paid to the approach to fabricating ordered reduced-symmetry metal nanostructure arrays. In this paper, a novel perforated silver nanocap array with high surface-enhanced Raman scattering (SERS) activity and fluorescence suppression is reported. The array is fabricated by electron beam evaporating Ag onto the perforated barrier layer side of a hard anodization (HA) anodic aluminum oxide (AAO) template. The morphology and optical property of the perforated silver nanocap array are characterized by an atomic force microscope (AFM), a scanning electron microscope (SEM), and absorption spectra. The results of SERS measurements reveal that the perforated silver nanocap array offers high SERS activity and fluorescence suppression compared with an imperforated silver nanocap array.
基金Funded by the National Natural Science Foundation of China(No.11747133)the Fundamental Research Funds for the Central Universities(No.195209019)。
文摘To study the effect of different deposition temperatures on the optical properties of porous SiC films,single crystal Si was used as the substrate,a layer of anodic aluminum oxide(AAO)film was transferred on the Si substrate by chemical method,and then a layer of SiC was deposited on anodic aluminum oxide(AAO)template to prepare porous fluorescent SiC film by magnetron sputtering.The deposition temperature was ranged from 373 to 873 K.The thickness of the porous SiC film coated on the AAO surface was around 283 nm.It is found that the porous SiC with the deposition temperature of 873 K has the strongest photoluminescence(PL)intensity excited by 375 nm laser.The time-resolved PL spectra prove that the PL is mainly from intrinsic light emitting of SiC.With the optimized process,porous amorphous SiC film may have potential applications in the field of warm white LEDs.
基金financially supported by the National Natural Science Foundation of China (No.51271036)
文摘AlNbO_4,as lithium-ion batteries(LIBs) anode,has a high theoretical capacity of 291.5 m Ah g^-1.Here,AlNbO_4 anode materials were synthesized through a simple solid-state method.The structure,morphology and electrochemical performances of AlNbO4 anode were systematically investigated.The results show that AlNbO4 is monoclinic with C2/m space group.The scanning electron microscopy(SEM) and transmission electron microscopy(TEM) characterizations reveal the AlNbO_4 particles with the size of 100 nm^–2 lm.As a lithium-ion batteries anode,AlNbO4 delivers a high reversible capacity and good rate capability.The discharge capacity is as high as 151.0 m Ah g^-1 after 50 charge and discharge cycles at 0.1 C corresponding to capacity retention of 90.7 %.When the current density increases to 5.0C,AlNbO4 anode displays reversible discharge capacity of 73.6 m Ah g^-1 at the50 th cycle.
基金Supported by the National Natural Science Foundation of China (10874134)
文摘Silver nanorod arrays have been fabricated by alternat-ing current(AC) and pulsed direct current(DC) electrodeposition in porous anodic aluminum oxide(AAO) templates with controlled pore diameters of 19,38,and 65 nm,respectively.The variation of their optical absorption properties with the incident angle and the nanorods length(corresponding to the electrodeposition time) has been investigated.Optical absorption spectra show that the posi-tion of longitudinal surface plasmon resonance(LSPR) peak has a small blueshift with the increase of incident angle of the excitation light.While the aspect ratio of the nanorods increases,the position of LSPR peak first redshifts and then blueshifts to a certain wave-length.Furthermore,the position of LSPR peak can be tuned,ranging from 550 nm to 900 nm,which makes it possible to cou-ple various wavelength of excitation source to assist radiative en-ergy transfer to the acceptor.
基金CSIR (09/0810 (0021)/ 2012-EMR-I), Periyar University for providing fundUGC networking resource center for providing visiting fellowship
文摘A simple, cost effective and rapid electrochemical method has been developed for the determination of micro level ortho nitrobenzaldehyde(ONB) based on outstanding properties of modified aluminum electrode tin nanorods/anodic aluminum oxide/aluminum(SnNR/AAO/Al) for the first time. The SnNR/AAO/Al electrode was fabricated by a second step anodization, followed by electrodeposition and its electrochemical behavior was investigated in detail. The cyclic voltammetry results indicated that the SnNR/AAO/Al electrode exhibited efficient electrocatalytic activity toward reduction of ONB in the acidic solution. It provides an appreciable improvement of reduction peak for ONB at-0.721 V.Furthermore, various kinetic parameters such as transfer electron number, transfer proton number and standard heterogeneous rate constant were calculated from the scan rates.The electrocatalytic behavior was further exploited as a sensitive detection scheme for the ONB determination by differential pulse voltammetry. Under the optimized conditions, the concentration range and detection limit are 0.1-100 μmol/L and 0.05 μmol/L, respectively,for ONB. The analytical performance of this modified sensor has been evaluated for detection of real sample such as river water and recovery of ONB was achieved all-out up to102.3% under standard addition method.
基金the National Natural Science Foundation of China(32272417)the National Key Research and Development Program of China(2018YFC1602802)+1 种基金the Natural Science Foundation of Fujian Province,China(2020J01681)the Open Project of PCOSS,Xiamen University,China(201926).
文摘Although surface-enhanced Raman spectroscopy(SERS)substrates have achieved high sensitivity,it is still difficult to apply these SERS protocols to the on-site detection of real samples due to the SERS substrate being fabrication-complexed,unstable,reproducible,or unable to be applied in batch production.Here,a large-scale ordered two-dimensional array of Au nano-hemispheres was developed through electron beam vaporization of Au onto the easy-available commercialized anodic aluminum oxide(AAO)template with two-layer nanostructures of different diameters.The uniform Au nano-hemisphere is reliable for SERS detection of malachite green(MG)due to the relative standard deviation(RSD)of the SERS intensities at different locations less than 10%.With the optimized excitation wavelength,solvent effect and pH environment,the linear range of MG detection spans from 10^(-10) to 10^(-6) mol/L with a limit of detection(LOD)of 4×10^(-10) mol/L.The enhancement factor can reach 1.2×10^(6).After extraction with acetonitrile and dichloromethane,MG in the spiked tilapia was detected with satisfactory recovery.The results indicate that the Au nano-hemisphere array can be expected to greatly facilitate SERS practical applications in detecting harmful food additives and chemicals due to the advantages of chemical inertness,physical robustness,simple fabrication,controllability,large-area uniformity,and large-batch production.
基金Supported by National Natural Science Foundation of China (10835008)Knowledge Innovation Program of Chinese Academy of Sciences (KJCX3-SYW-N8)Momentous Equipment Program of Chinese Academy of Sciences (YZ200829)
文摘The spatial structures of magnetic Co nanowire array embedded in anodic aluminium membranes were investigated by grazing incidence small angle X-ray scattering (GISAXS) and conventional small angle X-ray scattering (SAXS) techniques. Compared with SEM observation, the GISAXS and SAXS measurements can get more overall structural information in a large-area scale. In this study, the two-dimensional GISAXS pattern was well reconstructed by using the IsGISAXS program. The results demonstrate that the hexagonal lattice formed by the Co nanowires is distorted (a ≈105 nm, b ≈95 nm). These Co nanowires are isolated into many structure domains with different orientations with a size of about 2 p_m. The SAXS results have also confirmed that the nanopore structures in the AAM can be retained after depositing Co nanowires although the Co nanowires can not completely but only just fill up the nanopores. These results are helpful for understanding the global structure of the Co nanowire array.
基金Project supported by the National High-Tech Research and Development Program of China(No2008AA031402)the National Natural Science Foundation of China(Nos60606024,61076077)
文摘An electroless deposition(ELD) method is introduced to fabricate a metal nanoplug for its advantages of simplicity,low cost and auto-selectivity.It was demonstrated that nanoplugs of less than 50 nm in diameter can be fabricated by ELD nickel on various substrates,such as silicon,tungsten and titanium nitride.The main composition of the ELD nanoplug was characterized as nickel by an energy dispersive X-ray microanalyzer.A functional vertical phase-change random access memory(PCRAM) device with a heater diameter of around 9μm was fabricated by using the ELD method.TheⅠ-Ⅴcharacteristics demonstrated that the threshold current is only 90.8μA.This showed that the ELD process can satisfy the demands of PCRAM device application,as well as device performance improvement.The ELD process provides a promising method for the simple and low-cost fabrication of metal nanoplugs.