[Objective] The aim of this study was to provide a fast, stable and efficient piggery wastewater processing technology. [Method] The start-up process was studied through the experiment of piggery anaerobic fermentatio...[Objective] The aim of this study was to provide a fast, stable and efficient piggery wastewater processing technology. [Method] The start-up process was studied through the experiment of piggery anaerobic fermentation slurry treated by Anoxic/Oxic （A/O） reactor. The process was divided into two stages： at the first stage, dominant micro flora were cultivated in Anoxic and Oxic reaction tanks respectively; at the second stage. Anoxic and Oxic reaction tanks were initiated jointly to gradually enhance water load and continued to cultivate and domesticate microorganisms, and finally the start-up process was completed. [ Result] The results showed that return mixture ratio and return sludge ratio was 2 and 1 respectively when the temperature reached 32 ±2 ℃. However. when aeration rate of Oxic reaction amounted to 0.5 m^3/h, the re- moval rate of COD and NH4^＋ -H were 89.87% and 89.31% respectively through practical operation within 50 days, which indicated that the start- up process through A/O reactor was successful. Conclusion This study can provide a scientific basis and reference for innocuous technique of piggery anaerobic fermentation slurry treatment.展开更多
In order to enhance phosphorus removal in traditional step-feed anoxic/oxic nitrogen removal process,a modified pilot-scale step-feed anaerobic/anoxic/oxic(SFA 2/O) system was developed,which combined a reactor simila...In order to enhance phosphorus removal in traditional step-feed anoxic/oxic nitrogen removal process,a modified pilot-scale step-feed anaerobic/anoxic/oxic(SFA 2/O) system was developed,which combined a reactor similar to UCT-type configuration and two-stage anoxic/oxic process.The simultaneous nitrogen and phosphorus removal capacities and the potential of denitrifying phosphorus removal,in particular,were investigated with four different feeding patterns using real municipal wastewater.The results showed that the feeding ratios(Q1)in the first stage determined the nutrient removal performance in the SFA 2/O system.The average phosphorus removal efficiency increased from 19.17% to 96.25% as Q1 was gradually increased from run 1 to run 4,but the nitrogen removal efficiency exhibited a different tendency,which attained a maximum 73.61%in run 3 and then decreased to 59.62%in run 4.As a compromise between nitrogen and phosphorus removal,run 3 (Q1=0.45Qtotal) was identified as the optimal and stable case with the maximum anoxic phosphorus uptake rate of 1.58 mg·(g MLSS)-1 ·h-1.The results of batch tests showed that ratio of the anoxic phosphate uptake capacity to the aerobic phosphate uptake capacity increased from 11.96% to 36.85% with the optimal influent feeding ratio to the system in run 3,which demonstrated that the denitrifying polyP accumulating organisms could be accumulated and contributed more to the total phosphorus removal by optimizing the inflow ratio distribution.However,the nitrate recirculation to anoxic zone and influent feeding ratios should be carefully controlled for carbon source saving.展开更多
Nitrogen is the most important component for living beings while the excessive discharge of organic and inorganic nitrogen may create severe environmental problems.In this study,a continuous anoxic/oxic(A/O)reactor ad...Nitrogen is the most important component for living beings while the excessive discharge of organic and inorganic nitrogen may create severe environmental problems.In this study,a continuous anoxic/oxic(A/O)reactor adopting activated sludge and sludge biofilms in the anoxic and oxic zones was applied for total nitrogen(TN)and chemical oxygen demand(COD)removal,and the efficiencies of nitrification and denitrification were compared as well.Results showed that when using activated sludge,the effluent concentrations of NH_(4)^(+)-N,NO_(3)^(-)-N,NO_(2)^(-)-N,TN and COD were inconsistent and fluctuated greatly,and the removal efficiencies of corresponding nitrification,denitrification and TN were also unstable;the obtained average COD removal efficiency was 85%.While using sludge biofilms,the acquired effluent concentrations of NH^(+)_(4)-N,NO^(-)_(3)-N,NO_(2)^(-)-N,TN and COD became stable and constant.The nitrification,denitrification,TN and COD removal efficiencies were 96%,84%and 65%and 94%,respectively.Bacterial community analysis of sludge biofilms indicated that the genus Arcobacter was the major denitrifiers in the anoxic zone with relative abundance of 76.1%,and in the oxic zone the abundances of Acinetobacter,Hydrogenophaga and Nitrospira responsible for complete nitrification were 20.05%,7.6%and 3.7%respectively.The high abundance of nitrifying bacteria and denitrifiers were related with the high and stable nitrogen and COD removal.展开更多
Transformations of di-n-butyl phthalate(DBP) and di(2-ethylhexyl) phthalate(DEHP) have been investigated in anaerobic/anoxic/oxic(A/A/O) leachate treatment processes. Although the DBP removal processes are different w...Transformations of di-n-butyl phthalate(DBP) and di(2-ethylhexyl) phthalate(DEHP) have been investigated in anaerobic/anoxic/oxic(A/A/O) leachate treatment processes. Although the DBP removal processes are different when the DBP initial concentration is different, the overall system DBP removal efficiencies are high(N 94%).DEHP is much more difficult to remove than DBP. The removal efficiency of DEHP is approximately 75%–78%.The results of mass balance calculations indicate that approximately 33.7%–50.7% of the DBP is degraded by the activated sludge, 48.9%–64.9% accumulates in the system, and 0.4%–1.4% is contained in the final effluent. Approximately 15.0%–19.0% of the DEHP is degraded by activated microcosms, 75.8%–79.0% accumulates in the system, and 5.2%–6.0% is contained in the final effluent. Biodegradation and adsorption to the activated sludge are the main mechanisms for DBP removal and adsorption to the activated sludge is the main mechanism for DEHP removal. The different removal mechanisms of the two PAEs may be related to their different molecular structures. However, PAEs are not really removed when they adsorb onto the sludge. Therefore, methods for decreasing PAEs adsorption and increasing the biodegradation efficiencies of the leachate treatment processes should be further investigated.展开更多
Kinetics models of COD degradation,biomass growth of the anoxic-oxic ( A/O) system as well as NH3-N degradation in aerobic phase were presented according to the mass balance theory,reaction-diffusion theory and Fick l...Kinetics models of COD degradation,biomass growth of the anoxic-oxic ( A/O) system as well as NH3-N degradation in aerobic phase were presented according to the mass balance theory,reaction-diffusion theory and Fick law. Then these models were testified by comparson with experimental results. It is demonstrated that the variation trends of theoretical and experimental values for COD degradation and biomass growth are similar. The deviation rate between theoretical and experimental values is always under 20% even it increases along with the fluctuation of influent organic loading. In terms of NH3-N degradation,nitrification can also be well simulated by the model as the substrates of influent are sufficient. It indicates that the model can accurately reflect the reaction in hybrid A/O process. Models presented herein provide a theoretical basis for the design, operation and control of hybrid A/O process.展开更多
Microbial fuel cell (MFC) embedded in anaerobic-anoxic-oxic (A2/O) process has positive effects on wastewater treatment, which can enhance the efficiencies of pollutants’ removal, along with electricity production. B...Microbial fuel cell (MFC) embedded in anaerobic-anoxic-oxic (A2/O) process has positive effects on wastewater treatment, which can enhance the efficiencies of pollutants’ removal, along with electricity production. But the electricity generation performance and its optimization of MFC embedded in A2O process still needs to be further investigated. In this study, in order to optimize the contaminants removal and electricity production of the MFC-A2/O reactor, a lab-scale corridor-style MFC-A2/O reactor, which could simulate the practical A2/O biological reactor better, was designed and operated. The removal efficiencies of chemical oxygen demand, total nitrogen and total phosphorus were continuously monitored so as the electricity generation. In addition, the influences of the structural parameters’ changes of MFC on the output voltage, including electrode material, the directly connected area and the distance between electrodes, were also studied. The results elucidated that the effluent quality of A2/O reactor could be improved when MFC was embedded, and all the investigated structural factors were closely related to the electricity generation performance of MFC to some extent.展开更多
Fluid catalytic cracking (FCC) salty wastewaters, containing quaternary ammonium compounds (QACs), are very difficult to treat by biochemical process. Anoxic/oxic (A/O) biochemical system, based on nitrification and d...Fluid catalytic cracking (FCC) salty wastewaters, containing quaternary ammonium compounds (QACs), are very difficult to treat by biochemical process. Anoxic/oxic (A/O) biochemical system, based on nitrification and denitrification reactions, was used to assess their possible biodegradation. Because of the negative effects of high salt concentration (3%), heavy metals and toxic organic matter on microorganisms’ activities, some techniques consisting of dilution, coagulation and flocculation, and ozonation pretreatments, were gradually tested to evaluate chemical oxygen demand (COD), ammonia-nitrogen (ammonia-N) and total nitrogen (TN) removal rates. In this process of FCC wastewater, starting with university-domesticated sludge, the ammonia-N and TN removal rates were worst. However, when using domesticated SBR’s sludge and operating with five-fold daily diluted influent (thus reducing salt concentration), the ammonia-N removal reached about 57% while the TN removal rate was less than 37% meaning an amelioration of the nitrification process. However, by reducing the dilution factors, these results were inflected after some days of operation, with ammonia-N removal decreasing and TN barely removed meaning a poor nitrification. Even by reducing heavy metals concentration with coagulation/flocculation process, the results never changed. Thereafter, by using ozonation pre-treatment to degrade the detected organic matter of di-tert-butylphenol and certain isoparaffins, COD, ammonia-N and TN removal rates reached 92%, 62% and 61%, respectively. These results showed that the activities of the microorganisms were increased, thus indicating a net denitrification and nitrification reactions improvement.展开更多
基金Supported by National Eleventh Five-Year Science and TechnologySupport Program(1-1-12-0661)~~
文摘[Objective] The aim of this study was to provide a fast, stable and efficient piggery wastewater processing technology. [Method] The start-up process was studied through the experiment of piggery anaerobic fermentation slurry treated by Anoxic/Oxic （A/O） reactor. The process was divided into two stages： at the first stage, dominant micro flora were cultivated in Anoxic and Oxic reaction tanks respectively; at the second stage. Anoxic and Oxic reaction tanks were initiated jointly to gradually enhance water load and continued to cultivate and domesticate microorganisms, and finally the start-up process was completed. [ Result] The results showed that return mixture ratio and return sludge ratio was 2 and 1 respectively when the temperature reached 32 ±2 ℃. However. when aeration rate of Oxic reaction amounted to 0.5 m^3/h, the re- moval rate of COD and NH4^＋ -H were 89.87% and 89.31% respectively through practical operation within 50 days, which indicated that the start- up process through A/O reactor was successful. Conclusion This study can provide a scientific basis and reference for innocuous technique of piggery anaerobic fermentation slurry treatment.
基金Supported by the Project of Beijing Science and Technology Committee (D07050601500000)the National Key Science and Technology Special Projects (2008ZX07317-007-105)
文摘In order to enhance phosphorus removal in traditional step-feed anoxic/oxic nitrogen removal process,a modified pilot-scale step-feed anaerobic/anoxic/oxic(SFA 2/O) system was developed,which combined a reactor similar to UCT-type configuration and two-stage anoxic/oxic process.The simultaneous nitrogen and phosphorus removal capacities and the potential of denitrifying phosphorus removal,in particular,were investigated with four different feeding patterns using real municipal wastewater.The results showed that the feeding ratios(Q1)in the first stage determined the nutrient removal performance in the SFA 2/O system.The average phosphorus removal efficiency increased from 19.17% to 96.25% as Q1 was gradually increased from run 1 to run 4,but the nitrogen removal efficiency exhibited a different tendency,which attained a maximum 73.61%in run 3 and then decreased to 59.62%in run 4.As a compromise between nitrogen and phosphorus removal,run 3 (Q1=0.45Qtotal) was identified as the optimal and stable case with the maximum anoxic phosphorus uptake rate of 1.58 mg·(g MLSS)-1 ·h-1.The results of batch tests showed that ratio of the anoxic phosphate uptake capacity to the aerobic phosphate uptake capacity increased from 11.96% to 36.85% with the optimal influent feeding ratio to the system in run 3,which demonstrated that the denitrifying polyP accumulating organisms could be accumulated and contributed more to the total phosphorus removal by optimizing the inflow ratio distribution.However,the nitrate recirculation to anoxic zone and influent feeding ratios should be carefully controlled for carbon source saving.
基金National Natural Science Foundation of China(No.52070040,No.51878136,and No.51878135)Shanghai Rising-Star Program,China(No.19QC1400300)the Fundamental Research Funds for the Central Universities,China(DHU Distinguished Young Professor Program)。
文摘Nitrogen is the most important component for living beings while the excessive discharge of organic and inorganic nitrogen may create severe environmental problems.In this study,a continuous anoxic/oxic(A/O)reactor adopting activated sludge and sludge biofilms in the anoxic and oxic zones was applied for total nitrogen(TN)and chemical oxygen demand(COD)removal,and the efficiencies of nitrification and denitrification were compared as well.Results showed that when using activated sludge,the effluent concentrations of NH_(4)^(+)-N,NO_(3)^(-)-N,NO_(2)^(-)-N,TN and COD were inconsistent and fluctuated greatly,and the removal efficiencies of corresponding nitrification,denitrification and TN were also unstable;the obtained average COD removal efficiency was 85%.While using sludge biofilms,the acquired effluent concentrations of NH^(+)_(4)-N,NO^(-)_(3)-N,NO_(2)^(-)-N,TN and COD became stable and constant.The nitrification,denitrification,TN and COD removal efficiencies were 96%,84%and 65%and 94%,respectively.Bacterial community analysis of sludge biofilms indicated that the genus Arcobacter was the major denitrifiers in the anoxic zone with relative abundance of 76.1%,and in the oxic zone the abundances of Acinetobacter,Hydrogenophaga and Nitrospira responsible for complete nitrification were 20.05%,7.6%and 3.7%respectively.The high abundance of nitrifying bacteria and denitrifiers were related with the high and stable nitrogen and COD removal.
基金funded by the National Natural Science Foundation of China(51678531,51878617).
文摘Transformations of di-n-butyl phthalate(DBP) and di(2-ethylhexyl) phthalate(DEHP) have been investigated in anaerobic/anoxic/oxic(A/A/O) leachate treatment processes. Although the DBP removal processes are different when the DBP initial concentration is different, the overall system DBP removal efficiencies are high(N 94%).DEHP is much more difficult to remove than DBP. The removal efficiency of DEHP is approximately 75%–78%.The results of mass balance calculations indicate that approximately 33.7%–50.7% of the DBP is degraded by the activated sludge, 48.9%–64.9% accumulates in the system, and 0.4%–1.4% is contained in the final effluent. Approximately 15.0%–19.0% of the DEHP is degraded by activated microcosms, 75.8%–79.0% accumulates in the system, and 5.2%–6.0% is contained in the final effluent. Biodegradation and adsorption to the activated sludge are the main mechanisms for DBP removal and adsorption to the activated sludge is the main mechanism for DEHP removal. The different removal mechanisms of the two PAEs may be related to their different molecular structures. However, PAEs are not really removed when they adsorb onto the sludge. Therefore, methods for decreasing PAEs adsorption and increasing the biodegradation efficiencies of the leachate treatment processes should be further investigated.
基金Sponsored by the National Water Plan (2008ZX07207-005-03)
文摘Kinetics models of COD degradation,biomass growth of the anoxic-oxic ( A/O) system as well as NH3-N degradation in aerobic phase were presented according to the mass balance theory,reaction-diffusion theory and Fick law. Then these models were testified by comparson with experimental results. It is demonstrated that the variation trends of theoretical and experimental values for COD degradation and biomass growth are similar. The deviation rate between theoretical and experimental values is always under 20% even it increases along with the fluctuation of influent organic loading. In terms of NH3-N degradation,nitrification can also be well simulated by the model as the substrates of influent are sufficient. It indicates that the model can accurately reflect the reaction in hybrid A/O process. Models presented herein provide a theoretical basis for the design, operation and control of hybrid A/O process.
文摘Microbial fuel cell (MFC) embedded in anaerobic-anoxic-oxic (A2/O) process has positive effects on wastewater treatment, which can enhance the efficiencies of pollutants’ removal, along with electricity production. But the electricity generation performance and its optimization of MFC embedded in A2O process still needs to be further investigated. In this study, in order to optimize the contaminants removal and electricity production of the MFC-A2/O reactor, a lab-scale corridor-style MFC-A2/O reactor, which could simulate the practical A2/O biological reactor better, was designed and operated. The removal efficiencies of chemical oxygen demand, total nitrogen and total phosphorus were continuously monitored so as the electricity generation. In addition, the influences of the structural parameters’ changes of MFC on the output voltage, including electrode material, the directly connected area and the distance between electrodes, were also studied. The results elucidated that the effluent quality of A2/O reactor could be improved when MFC was embedded, and all the investigated structural factors were closely related to the electricity generation performance of MFC to some extent.
文摘Fluid catalytic cracking (FCC) salty wastewaters, containing quaternary ammonium compounds (QACs), are very difficult to treat by biochemical process. Anoxic/oxic (A/O) biochemical system, based on nitrification and denitrification reactions, was used to assess their possible biodegradation. Because of the negative effects of high salt concentration (3%), heavy metals and toxic organic matter on microorganisms’ activities, some techniques consisting of dilution, coagulation and flocculation, and ozonation pretreatments, were gradually tested to evaluate chemical oxygen demand (COD), ammonia-nitrogen (ammonia-N) and total nitrogen (TN) removal rates. In this process of FCC wastewater, starting with university-domesticated sludge, the ammonia-N and TN removal rates were worst. However, when using domesticated SBR’s sludge and operating with five-fold daily diluted influent (thus reducing salt concentration), the ammonia-N removal reached about 57% while the TN removal rate was less than 37% meaning an amelioration of the nitrification process. However, by reducing the dilution factors, these results were inflected after some days of operation, with ammonia-N removal decreasing and TN barely removed meaning a poor nitrification. Even by reducing heavy metals concentration with coagulation/flocculation process, the results never changed. Thereafter, by using ozonation pre-treatment to degrade the detected organic matter of di-tert-butylphenol and certain isoparaffins, COD, ammonia-N and TN removal rates reached 92%, 62% and 61%, respectively. These results showed that the activities of the microorganisms were increased, thus indicating a net denitrification and nitrification reactions improvement.
