A Study on The Multi-Antenna Geometrical Depolarization Channel Modeling

The traditional geometrical depolarization model that single transmitter to single receiver provides a simple method of polarization channel modeling. It can obtain the geometrical depolarization effect of each path if known the antenna configuration, the polarization field radiation pattern and the spatial distribution of scatters. With the development of communication technology, information transmission spectrum is more and more scarce. The original model provides only a single channel polarization state, so the information will be limited that the polarization state carries in the polarization modulation. The research is so significance that how to carries polarization modulation information by using multi-antenna polarization state. However, the present study shows that have no depolarization effect model for multi-antenna systems. In this paper, we propose a multi-antenna geometrical depolarization model. On the basis of a single antenna to calculate the depolarization effect of the model, and through simulation to analysis the main factors that influence the depolarization effect. This article provides a multi-antenna geometrical depolarization channel modeling that can applied to large-scale array antenna, and to some extent increase the speed of information transmission.

Electromagnetic Analysis of the EAST 4-Strap ICRF Antenna with HFSS Code

A new ICRF antenna has been designed in EAST, whose aims are to reduce the parallel RF electric fields Ell and to investigate the current drive using the fast magnetosonic wave. This antenna consists of four toroidally spaced radiating straps. The electrical characteristics of the new antenna are estimated by using a three-dimensional electromagnetic commercial code. The S-parameters, RF current distribution and electromagnetic field distribution on and near the 4-strap antenna are analyzed, and the RF potentials influenced by antenna phasing and radial position are investigated.

Invited Paper: Antenna Selection in Energy Efficient MIMO Systems: A Survey

With the explosive growth and need for high-speed wireless communications, more and more energy is consumed to support the required quality of service. Therefore, energy efficient or green communication has become a very hot topic under the ground of limited energy resource and environmentally friendly transmission schemes. MIMO technique is capable of reducing the transmission power thanks to its diversity and multiplexing gain. Moreover, antenna selection(AS) is an alternative to extract many of the benefits in MIMO systems with a reduced cost of complexity and power. Although many works including several survey papers have investigated AS in MIMO systems, the goal of these works is only the capacity maximization or error rate minimization, which fails to guarantee the optimality of the energy efficiency in MIMO systems. In this paper, we overview the state of the art in the AS schemes in energy efficient MIMO systems, the goal of which is to optimize the energy efficiency of the whole system. Specifically, we introduce energy efficient AS in point-to-point MIMO, cooperative MIMO, multiuser MIMO and largescale MIMO systems, respectively. Several challenging and practical issues in this area are also addressed.

A new calibration model for pointing a radio telescope that considers nonlinear errors in the azimuth axis

A new calibration model of a radio telescope that includes pointing error is presented, which considers nonlinear errors in the azimuth axis. For a large radio telescope, in particular for a telescope with a turntable, it is difficult to correct pointing errors using a traditional linear calibration model, because errors produced by the wheel-on-rail or center bearing structures are generally nonlinear. Fourier expansion is made for the oblique error and parameters describing the inclination direction along the azimuth axis based on the linear calibration model, and a new calibration model for pointing is derived. The new pointing model is applied to the 40 m radio telescope administered by Yunnan Observatories, which is a telescope that uses a turntable. The results show that this model can significantly reduce the residual systematic errors due to nonlinearity in the azimuth axis compared with the linear model.

A Geometry-Based Non-Stationary MIMO Channel Model for Vehicular Communications

This paper derives a non-stationary multiple-input multiple-output(MIMO) from the one-ring scattering model. The proposed channel model characterizes vehicular radio propagation channels with considerations of moving base and mobile stations, which makes the angle of arrivals(AOAs) along with the angle of departures(AODs) time-variant. We introduce the methodology of including the time-variant impacts when characterizing non-stationary radio propagation channels through the geometrical channel modelling approach. We analyze the statistical properties of the proposed channel model including the local time-variant autocorrelation function(ACF) and the space cross-correlation functions(CCFs). We show that the model developed in this paper for non-stationary scenarios includes the existing one-ring wide-sense stationary channel model as its special case.

Polarization Projection for 3D Geometry-Based Stochastic Channel Model

Comprehensive radiation characteristics of polarized antenna are crucial in creating practical channel coefficients for next generation wireless communication system designs.Being currently supported within3 D geometry-based stochastic channel models(GSCM),field patterns are technically obtained by chamber measurement(or by its best fitting).However,in some channel related performance analysis scenarios,design insight can be crystallized better by starting the derivations with theoretical co-polarization and cross-polarization components.Specifically,these two components are mathematically linked with field patterns through the proposed polarization projection algorithm.In this manuscript,we focus on revealing the transformation criterion of polarization states between the antenna plane and the propagation plane.In practice,it makes retrieving the field patterns by electromagnetic computation possible.Meanwhile,the impact imposed by distinct antenna orientations is geometrically illustrated and consequently incorporated into the proposed algorithm.This will further facilitate flexible performance evaluation of related radio transmission technologies.Our conclusions are verified by the closed-form expression of the dipole field pattern(via an analytical approach) and by chamber measurement results.Moreover,we find that its 2D degenerative case is aligned with the definitions in 3^(rd) generation partnership project(3GPP)technical report 25.996.The most obvious benefit of the proposed algorithm is to significantly reduce the cost on generating channel coefficients in GSCM simulation.

Multi-block electret-based mechanical antenna model for low frequency communication

In an LF/VLF transmission system,the performance of the antenna is of great importance to the entire system.Currently,the electret-based mechanical LF/VLF antenna uses mechanical movement to accelerate electret charges to produce LF/VLF electromagnetic waves,and the frequency of these electromagnetic waves is limited by the rotation speed of the actuating motor.Based on research that addressed the relationship between antenna structure and electromagnetic wave frequency,this paper—in order to increase the frequency of electromagnetic waves—alters the charge distribution mode of the mechanical antenna while keeping the motor’s rotational speed constant to realize an increase of transmission signal frequency.The effectiveness of this method was verified by model simulation.