The structure modification and its mechanism have been studied when perlite products changed from water-affinity state to anti-water state. The structure of fused perlite and its surface physicochemical properties hav...The structure modification and its mechanism have been studied when perlite products changed from water-affinity state to anti-water state. The structure of fused perlite and its surface physicochemical properties have also been studied. The modification of perlite products has provided the products with anti-water property, which not only enhanced the quality of thermal insulating function, reduced the lost of heat energy, but also made the products water-proof These modified perlite products are used as ideal thermal insulating layers for the thermodynamic equipment and heat transporting conducts.展开更多
Detecting exactly information from pulse position modulation (PPM) is difficult in shallow water channels because of the high noise level there. This paper reports results of analyses of some statistical characteristi...Detecting exactly information from pulse position modulation (PPM) is difficult in shallow water channels because of the high noise level there. This paper reports results of analyses of some statistical characteristics of shallow water channel noise and its adverse effect on detecting PPM information; and proposes some efficient countermeasures (the method of statistical decision, use of pulse width discriminator and digital selective-frequency filter) to overcome noise interference. The results have been applied to PPM detection systems and proved to be efficient, and are of reference value for other models of signal detection.展开更多
The application of a novel Automatic Dynamic Simulator of Fouling (ADSF) to evaluate the effectiveness of ion-rod water treater is reported.The effects of some parameters of the water treater were studied with an ADSF...The application of a novel Automatic Dynamic Simulator of Fouling (ADSF) to evaluate the effectiveness of ion-rod water treater is reported.The effects of some parameters of the water treater were studied with an ADSF made according to patented technology, and orthogonal experimental design was adopted with the use of artificial hard water.Experimental results validated that the ion-rod water treater could mitigate fouling,and the anti-fouling efficiency varies with the test conditions.The anti-fouling efficiency of treater increased with the increase of flow velocity in the range of 0.8—1.2 m·s -1 and output voltage in the range of 7500—15000 V.The efficiency weat up initially, and then went down with the increase in hardness.The rough surface of ion-rod was superior to the smooth one.The order of influence on treater performance with respect to these factors was as follows: water hardness, roughness of surface, flow velocity and output voltage.The research also provided a guide to improving the performance of ion-rod water treater.展开更多
This paper describes the development of a plasma process to produce a durable water repellent and anti-stain thin film on synthetic textile, utilized for the upholstery in the automotive field. The coatings were depos...This paper describes the development of a plasma process to produce a durable water repellent and anti-stain thin film on synthetic textile, utilized for the upholstery in the automotive field. The coatings were deposited in non equilibrium low pressure plasmas fed with 1H, 1H, 2H-perfluo-ro- 1-decene employing, as substrates, polyethylene terephthalate and polyethylene terephthalate thermo-coupled to polyurethane foam. It was found that the XPS F/C ratio of the deposit was higher than 1.4 and that the treated textile was always very hydrophobic (WCA > 140?) and oil resistant (motor oil CA > 110?), even after wear.展开更多
The phenomenon of petroleum wax deposition is very common during oil well production. When the wax molecule condenses on the surface of the pipeline, it will hinder the exploitation of crude oil, reduce the recovery r...The phenomenon of petroleum wax deposition is very common during oil well production. When the wax molecule condenses on the surface of the pipeline, it will hinder the exploitation of crude oil, reduce the recovery rate of crude oil, and may lead to the blockage of the pipeline when it is serious, so that the oil recovery work will stop. This phenomenon can be obviously changed by using wax cleaning agent. However, the low ignition point and toxicity of oil-based wax remover are not conducive to oil recovery. Therefore, a new water-based paraffin remover SGJ-1 was developed in this paper. The best formula is: wax dispersant 15%, wetting reversion agent 1%, sodium silicate 1%, alcohol cosolvent 8% and 75% water. Condensation point, wax dissolution rate and anti-wax performance of SGJ-1 water-based dewaxing and anti-waxing agent were tested by self-assembly testing device. The experimental results show that the condensation point of SGJ-1 is -34°C, the viscosity reduction effect is good under 35°C, and the wax dissolution rate is 0.0512 g/min, The highest wax prevention rate can reach 89.58% and the wax removal and wax prevention ability is excellent. Compared with other paraffin removers, SGJ-1 can also reduce the viscosity of crude oil, so it has a good development prospect.展开更多
文摘The structure modification and its mechanism have been studied when perlite products changed from water-affinity state to anti-water state. The structure of fused perlite and its surface physicochemical properties have also been studied. The modification of perlite products has provided the products with anti-water property, which not only enhanced the quality of thermal insulating function, reduced the lost of heat energy, but also made the products water-proof These modified perlite products are used as ideal thermal insulating layers for the thermodynamic equipment and heat transporting conducts.
文摘Detecting exactly information from pulse position modulation (PPM) is difficult in shallow water channels because of the high noise level there. This paper reports results of analyses of some statistical characteristics of shallow water channel noise and its adverse effect on detecting PPM information; and proposes some efficient countermeasures (the method of statistical decision, use of pulse width discriminator and digital selective-frequency filter) to overcome noise interference. The results have been applied to PPM detection systems and proved to be efficient, and are of reference value for other models of signal detection.
基金supported by Jilin Distinguished YoungScholars Program (20040121).
文摘The application of a novel Automatic Dynamic Simulator of Fouling (ADSF) to evaluate the effectiveness of ion-rod water treater is reported.The effects of some parameters of the water treater were studied with an ADSF made according to patented technology, and orthogonal experimental design was adopted with the use of artificial hard water.Experimental results validated that the ion-rod water treater could mitigate fouling,and the anti-fouling efficiency varies with the test conditions.The anti-fouling efficiency of treater increased with the increase of flow velocity in the range of 0.8—1.2 m·s -1 and output voltage in the range of 7500—15000 V.The efficiency weat up initially, and then went down with the increase in hardness.The rough surface of ion-rod was superior to the smooth one.The order of influence on treater performance with respect to these factors was as follows: water hardness, roughness of surface, flow velocity and output voltage.The research also provided a guide to improving the performance of ion-rod water treater.
文摘This paper describes the development of a plasma process to produce a durable water repellent and anti-stain thin film on synthetic textile, utilized for the upholstery in the automotive field. The coatings were deposited in non equilibrium low pressure plasmas fed with 1H, 1H, 2H-perfluo-ro- 1-decene employing, as substrates, polyethylene terephthalate and polyethylene terephthalate thermo-coupled to polyurethane foam. It was found that the XPS F/C ratio of the deposit was higher than 1.4 and that the treated textile was always very hydrophobic (WCA > 140?) and oil resistant (motor oil CA > 110?), even after wear.
文摘The phenomenon of petroleum wax deposition is very common during oil well production. When the wax molecule condenses on the surface of the pipeline, it will hinder the exploitation of crude oil, reduce the recovery rate of crude oil, and may lead to the blockage of the pipeline when it is serious, so that the oil recovery work will stop. This phenomenon can be obviously changed by using wax cleaning agent. However, the low ignition point and toxicity of oil-based wax remover are not conducive to oil recovery. Therefore, a new water-based paraffin remover SGJ-1 was developed in this paper. The best formula is: wax dispersant 15%, wetting reversion agent 1%, sodium silicate 1%, alcohol cosolvent 8% and 75% water. Condensation point, wax dissolution rate and anti-wax performance of SGJ-1 water-based dewaxing and anti-waxing agent were tested by self-assembly testing device. The experimental results show that the condensation point of SGJ-1 is -34°C, the viscosity reduction effect is good under 35°C, and the wax dissolution rate is 0.0512 g/min, The highest wax prevention rate can reach 89.58% and the wax removal and wax prevention ability is excellent. Compared with other paraffin removers, SGJ-1 can also reduce the viscosity of crude oil, so it has a good development prospect.
