After solution treatment, the 1420 Al-Li alloy samples were aged at different temperatures in an electric field with different intensity. The measurements made showed that the electric field increased the strength of ...After solution treatment, the 1420 Al-Li alloy samples were aged at different temperatures in an electric field with different intensity. The measurements made showed that the electric field increased the strength of the 1420 Al-Li alloy, and best properties were obtained when they were aged at 120 ℃ with E=4 kV/cm for 12 hrs. The electric field promoted the nucleation of δ′ phase, increased the quantity of the δ′ phase, and made the size of the δ′ phase particles smaller. The electric field restrained the formation and growth of PFZ, and increased the intensity of the electric field while the width of the PFZ was decreased.展开更多
This study investigates the effect of {10-12} deformation twins on the continuous precipitation behavior of an extruded Mg-8.0Al-0.5Zn-0.2Mn(AZ80) alloy during aging. The extruded AZ80 alloy is compressed along the tr...This study investigates the effect of {10-12} deformation twins on the continuous precipitation behavior of an extruded Mg-8.0Al-0.5Zn-0.2Mn(AZ80) alloy during aging. The extruded AZ80 alloy is compressed along the transverse direction to introduce {10-12} twins,followed by an aging treatment at 300 ℃. The extruded material exhibits a twin-free microstructure with low internal strain energy, whereas the pre-twinned material possesses abundant {10-12} twins and has high internal strain energy. The aging results reveal that the peak-aging time of the pre-twinned material(1 h) is one-eighth of that of the extruded material(8 h). Although Mg_(17)Al_(12) continuous precipitates(CPs)are observed in both the peak-aged materials, these CPs are much smaller and more densely distributed in the pre-twinned material despite the significantly shorter aging time. The CPs size in the peak-aged materials increases in the following order: twinned region in the pre-twinned material(0.47 μm) < residual matrix region in the pre-twinned material(1.71 μm) < matrix region in the extruded material(2.55 μm).Moreover, the CPs number density in the twinned region of the pre-twinned material is approximately 11 times higher than that in the matrix region of the extruded material. The peak-aged pre-twinned material exhibits significantly higher tensile strength and ductility than the peak-aged extruded material. These results demonstrate that the formation of {10-12} twins in the extruded AZ80 alloy substantially accelerates the static precipitation of CPs during aging at 300 ℃ and improves the tensile properties of the peak-aged material.展开更多
The properties of road base course materials of granular soils stabilized by AGS granular soil stabilizing cement were studied.The AGS cement has an expansibility to a certain degree,so the dry shrinkage of AGS cemen...The properties of road base course materials of granular soils stabilized by AGS granular soil stabilizing cement were studied.The AGS cement has an expansibility to a certain degree,so the dry shrinkage of AGS cement paste and AGS stabilized granular is much lower than that of Portland slag cement.AGS has a good suitability to granular soils.Granular soils stabilized by AGS have a much higher strength than that of soils stabilized by P S cement.The same strength can be reached with 20% reduction of cement dosage for AGS cement.And their elastic and resilient modulus are similar,but the former has a much higher tensile splitting strength,so the AGS stabilized granular has a much better anti-cracking performance than that of the P S stabilized granular.The reduced value of the strength and the density with the retard time for the granular soils stabilized by AGS is lower than that for P S cement.展开更多
Friction spun core yarn has two components: filament core and staple fiber sheath. Under axial rubbing action, the failure mode of the core yarn is the stripping of the sheath from the core. This paper introduces a me...Friction spun core yarn has two components: filament core and staple fiber sheath. Under axial rubbing action, the failure mode of the core yarn is the stripping of the sheath from the core. This paper introduces a method to test the anti - stripping property of the core yarn. With a modified Universal Testing Machine, the stripping resistance of friction spun core yarn can be continuously measured. Some factors Influencing the measurements are discussed in detail. The testing results are compared with those from a Y731 Yarn Abrasion Tester and fur - ther confirmed by weaving practice.展开更多
文摘After solution treatment, the 1420 Al-Li alloy samples were aged at different temperatures in an electric field with different intensity. The measurements made showed that the electric field increased the strength of the 1420 Al-Li alloy, and best properties were obtained when they were aged at 120 ℃ with E=4 kV/cm for 12 hrs. The electric field promoted the nucleation of δ′ phase, increased the quantity of the δ′ phase, and made the size of the δ′ phase particles smaller. The electric field restrained the formation and growth of PFZ, and increased the intensity of the electric field while the width of the PFZ was decreased.
基金supported by the National Research Foundation of Korea (NRF) (grant no.2019R1A2C1085272) funded by the Ministry of Science,ICTFuture Planning (MSIP,South Korea)。
文摘This study investigates the effect of {10-12} deformation twins on the continuous precipitation behavior of an extruded Mg-8.0Al-0.5Zn-0.2Mn(AZ80) alloy during aging. The extruded AZ80 alloy is compressed along the transverse direction to introduce {10-12} twins,followed by an aging treatment at 300 ℃. The extruded material exhibits a twin-free microstructure with low internal strain energy, whereas the pre-twinned material possesses abundant {10-12} twins and has high internal strain energy. The aging results reveal that the peak-aging time of the pre-twinned material(1 h) is one-eighth of that of the extruded material(8 h). Although Mg_(17)Al_(12) continuous precipitates(CPs)are observed in both the peak-aged materials, these CPs are much smaller and more densely distributed in the pre-twinned material despite the significantly shorter aging time. The CPs size in the peak-aged materials increases in the following order: twinned region in the pre-twinned material(0.47 μm) < residual matrix region in the pre-twinned material(1.71 μm) < matrix region in the extruded material(2.55 μm).Moreover, the CPs number density in the twinned region of the pre-twinned material is approximately 11 times higher than that in the matrix region of the extruded material. The peak-aged pre-twinned material exhibits significantly higher tensile strength and ductility than the peak-aged extruded material. These results demonstrate that the formation of {10-12} twins in the extruded AZ80 alloy substantially accelerates the static precipitation of CPs during aging at 300 ℃ and improves the tensile properties of the peak-aged material.
文摘The properties of road base course materials of granular soils stabilized by AGS granular soil stabilizing cement were studied.The AGS cement has an expansibility to a certain degree,so the dry shrinkage of AGS cement paste and AGS stabilized granular is much lower than that of Portland slag cement.AGS has a good suitability to granular soils.Granular soils stabilized by AGS have a much higher strength than that of soils stabilized by P S cement.The same strength can be reached with 20% reduction of cement dosage for AGS cement.And their elastic and resilient modulus are similar,but the former has a much higher tensile splitting strength,so the AGS stabilized granular has a much better anti-cracking performance than that of the P S stabilized granular.The reduced value of the strength and the density with the retard time for the granular soils stabilized by AGS is lower than that for P S cement.
文摘Friction spun core yarn has two components: filament core and staple fiber sheath. Under axial rubbing action, the failure mode of the core yarn is the stripping of the sheath from the core. This paper introduces a method to test the anti - stripping property of the core yarn. With a modified Universal Testing Machine, the stripping resistance of friction spun core yarn can be continuously measured. Some factors Influencing the measurements are discussed in detail. The testing results are compared with those from a Y731 Yarn Abrasion Tester and fur - ther confirmed by weaving practice.
