Cavitation erosion （CE） is the predominant cause for the failure of overflow components in fluid machinery. Advanced coatings have provided an effective solution to cavitation erosion due to the rapid development of...Cavitation erosion （CE） is the predominant cause for the failure of overflow components in fluid machinery. Advanced coatings have provided an effective solution to cavitation erosion due to the rapid development of surface engineering techniques. However, the influence of coating structures on CE resistance has not been sys- tematically studied. To better understand their relationship, micro-nano and conventional WC-10Co4Cr cermet coat- ings are deposited by high velocity oxygen fuel spray- ing（HVOF）, and their microstructures are analyzed by OM, SEM and XRD. Meanwhile, characterizations of mechan- ical and electrochemical properties of the coatings are carried out, as well as the coatings＇ resistance to CE in 3.5 wt % NaC1 solution, and the cavitation mechanisms are explored. Results show that micro-nano WC-10Co4Cr coating possesses dense microstructure, excellent mechanical and electrochemical properties, with very low porosity of 0.26 4-0.07% and extraordinary fracture toughness of 5.58 4-0.51 MPa.m1/2. Moreover, the CE resistance of micro-nano coating is enhanced above 50% than conventional coating at the steady CE period in 3.5 wt % NaC1 solution. The superior CE resistance of micro- nano WC-10Co4Cr coating may originate from the unique micro-nano structure and properties, which can effectively obstruct the formation and propagation of CE crack. Thus,a new method is proposed to enhance the CE resistance of WC-10Co4Cr coating by manipulating the microstructure.展开更多
Cavitation is often triggered when the fluid pres- sure is lower than the vapor pressure at a local thermo- dynamic state. The present article reviews recent progress made toward developing modeling and computational ...Cavitation is often triggered when the fluid pres- sure is lower than the vapor pressure at a local thermo- dynamic state. The present article reviews recent progress made toward developing modeling and computational strat- egies for cavitation predictions under both isothermal and cryogenic conditions, with an emphasis on the attached cav- ity. The review considers alternative cavitation models along Reynolds-averaged Navier-Stokes and very lager eddy simu- lation turbulence approaches to ensure that the computational tools can handle flows of engineering interests. Observing the substantial uncertainties associated with both modeling and experimental information, surrogate modeling strategies are reviewed to assess the implications and relative impor- tance of the various modeling and materials parameters. The exchange between static and dynamic pressures under the influence of the viscous effects can have a noticeable impact on the effective shape of a solid object, which can impact the cavitation structure. The thermal effect with respect to evaporation and condensation dynamics is examined to shed light on the fluid physics associated with cryogenic cav- itation. The surrogate modeling techniques are highlighted in the context of modeling sensitivity assessment. Keywords展开更多
利用Arnol'd的Legendrian理论,对三维Anti de Sitter空间中Lorentzian曲面进行了研究.引入光维高度函数概念研究了三维Anti de Sitter空间Lorentzian曲面的S1t×S1s-值、光锥Gauss映射的奇点,进行了奇点分类,揭示了类光Causs-kr...利用Arnol'd的Legendrian理论,对三维Anti de Sitter空间中Lorentzian曲面进行了研究.引入光维高度函数概念研究了三维Anti de Sitter空间Lorentzian曲面的S1t×S1s-值、光锥Gauss映射的奇点,进行了奇点分类,揭示了类光Causs-kronecker曲率之间的关系;并研究了Lorentzian曲面的一些基本几何性质.展开更多
It needs the foundation of system and the guarantee of organizational system for anti-corruption,but it is more necessary to build and form an effective anti-corruption mechanism,so that the anti-corruption can be rea...It needs the foundation of system and the guarantee of organizational system for anti-corruption,but it is more necessary to build and form an effective anti-corruption mechanism,so that the anti-corruption can be really put into practice. Anti-corruption mechanism refers to a organic operation system of the interaction,interconnection and constraint between the constituent elements( parts) and elements of national anti-corruption,and as a system,anti-corruption mechanism should have the characteristics of system aticness,comprehensiveness,transparency,legalization,public participation,scientific dynam ic,and internationalism. The construction of deepening anti-corruption mechanism is the need for reconstructing the ruling legitimacy of the party and the governm ent. Adhering to the principle of treating both root causes and symptoms is necessary in the construction of anti-corruption m echanism,com bating and punishing corruption is an important part of anti-corruption,and the prevention and control of corruption is the basic project of anti-corruption. Therefore,the construction of prevention and control mechanism in the anti-corruption mechanism has a more far-reaching significance.展开更多
A research on the process of cotton fabric flame-re-tarding,anti-bacterial finishing and one-bath finish-ing of anti-bacterial and flame-retarding is discussed.The flame retardant agent was phosphorous-contained,and t...A research on the process of cotton fabric flame-re-tarding,anti-bacterial finishing and one-bath finish-ing of anti-bacterial and flame-retarding is discussed.The flame retardant agent was phosphorous-contained,and the bacteriostatic finishing agent named SFR-1 wassynthesized.The flame retardancy of the fabric finishedcan meet the DOC FF3-71 Children Sleepwear Stan-dard.Its bacterial inhibiting capacity can meet and ex-ceed the requirements of similar products展开更多
Friction spun core yarn has two components: filament core and staple fiber sheath. Under axial rubbing action, the failure mode of the core yarn is the stripping of the sheath from the core. This paper introduces a me...Friction spun core yarn has two components: filament core and staple fiber sheath. Under axial rubbing action, the failure mode of the core yarn is the stripping of the sheath from the core. This paper introduces a method to test the anti - stripping property of the core yarn. With a modified Universal Testing Machine, the stripping resistance of friction spun core yarn can be continuously measured. Some factors Influencing the measurements are discussed in detail. The testing results are compared with those from a Y731 Yarn Abrasion Tester and fur - ther confirmed by weaving practice.展开更多
Since ancient times, traditional medicines have been in the usage for the treatment of Diabetes mellitus. An edible fruit from traditional medicinal plant Capparis zeylanica (CZ) was studied for its anti diabetic, ins...Since ancient times, traditional medicines have been in the usage for the treatment of Diabetes mellitus. An edible fruit from traditional medicinal plant Capparis zeylanica (CZ) was studied for its anti diabetic, insulin secretagogue activities and mechanisms involved in it. In Streptozotocin induced diabetes rats, oral administration of Capparis zeylanica methanolic extract (CZME) (200 mg/kg body weight) for 28 days showed a significant reduction in blood glucose levels by 35.53% and enhanced circulating insulin levels by 81.82% than the diabetic control rats. The insulin secretagogue activity mechanisms of the extract were evaluated by using mouse insulinoma beta cell line (MIN6-β). The extract stimulated insulin release in dependent manner of glucose concentration (3 - 16.7 mM) and extract dose (5 - 500 μg/mL). The insulin releasing effect of the extract was significantly enhanced by 3-isobutyl-1-methyl xanthine, glibenclamide, elevated extracellular calcium and K+ depolarized media. This insulin release was significantly reduced in calcium blocking conditions (by nifedipine and EGTA), in the presence of potassium channel opener (diazoxide). Hence, anti diabetic activity of CZME might be a result of its stimulatory effect on insulin release from pancreatic beta cells via KATP channel dependent and independent ways. These results indicate that CZ fruits have the potential to use in diabetes therapy.展开更多
In this work, the exp(-φ (ξ )) -expansion method is used for the first time to investigate the exact traveling wave solutions involving parameters of nonlinear evolution equations. When these parameters are taken to...In this work, the exp(-φ (ξ )) -expansion method is used for the first time to investigate the exact traveling wave solutions involving parameters of nonlinear evolution equations. When these parameters are taken to be special values, the solitary wave solutions are derived from the exact traveling wave solutions. The validity and reliability of the method are tested by its applications to Nano-ionic solitons wave’s propagation along microtubules in living cells and Nano-ionic currents of MTs which play an important role in biology.展开更多
The present paper focuses on the erosive cavitation behavior around a plane convex hydrofoil. The Zwart-Gerber-Belamri cavitation model is implemented in a library form to be used with the OpenFOAM. The implicit large...The present paper focuses on the erosive cavitation behavior around a plane convex hydrofoil. The Zwart-Gerber-Belamri cavitation model is implemented in a library form to be used with the OpenFOAM. The implicit large eddy simulation （ILES） is app- lied to analyze the three-dimensional unsteady cavitating flow around a plane convex hydrofoil. The numerical results in the cases under the hydrodynamic conditions, which were experimentally tested at the high speed cavitation tunnel of the l^cole Polytechnique F6d＆ale de Lausanne （EPFL）, clearly show the sheet cavitation development, the shedding and the collapse of vapor clouds. It is noted that the cavitation evolutions including the maximum vapor length, the detachment and the oscillation frequency, are captured fairly well. Furthermore, the pressure pulses due to the cavitation development as well as the complex vortex structures are reasona- bly well predicted. Consequently, it may be concluded that the present numerical method can be used to investigate the unsteady cavitation around hydrofoils with a satisfactory accuracy.展开更多
基金Supported by National Natural Science Foundation of China (Grand No. 51422507)
文摘Cavitation erosion （CE） is the predominant cause for the failure of overflow components in fluid machinery. Advanced coatings have provided an effective solution to cavitation erosion due to the rapid development of surface engineering techniques. However, the influence of coating structures on CE resistance has not been sys- tematically studied. To better understand their relationship, micro-nano and conventional WC-10Co4Cr cermet coat- ings are deposited by high velocity oxygen fuel spray- ing（HVOF）, and their microstructures are analyzed by OM, SEM and XRD. Meanwhile, characterizations of mechan- ical and electrochemical properties of the coatings are carried out, as well as the coatings＇ resistance to CE in 3.5 wt % NaC1 solution, and the cavitation mechanisms are explored. Results show that micro-nano WC-10Co4Cr coating possesses dense microstructure, excellent mechanical and electrochemical properties, with very low porosity of 0.26 4-0.07% and extraordinary fracture toughness of 5.58 4-0.51 MPa.m1/2. Moreover, the CE resistance of micro-nano coating is enhanced above 50% than conventional coating at the steady CE period in 3.5 wt % NaC1 solution. The superior CE resistance of micro- nano WC-10Co4Cr coating may originate from the unique micro-nano structure and properties, which can effectively obstruct the formation and propagation of CE crack. Thus,a new method is proposed to enhance the CE resistance of WC-10Co4Cr coating by manipulating the microstructure.
基金supported by the NASA Constellation University Institutes Program(CUIP),Claudia Meyer projeGt manager
文摘Cavitation is often triggered when the fluid pres- sure is lower than the vapor pressure at a local thermo- dynamic state. The present article reviews recent progress made toward developing modeling and computational strat- egies for cavitation predictions under both isothermal and cryogenic conditions, with an emphasis on the attached cav- ity. The review considers alternative cavitation models along Reynolds-averaged Navier-Stokes and very lager eddy simu- lation turbulence approaches to ensure that the computational tools can handle flows of engineering interests. Observing the substantial uncertainties associated with both modeling and experimental information, surrogate modeling strategies are reviewed to assess the implications and relative impor- tance of the various modeling and materials parameters. The exchange between static and dynamic pressures under the influence of the viscous effects can have a noticeable impact on the effective shape of a solid object, which can impact the cavitation structure. The thermal effect with respect to evaporation and condensation dynamics is examined to shed light on the fluid physics associated with cryogenic cav- itation. The surrogate modeling techniques are highlighted in the context of modeling sensitivity assessment. Keywords
文摘利用Arnol'd的Legendrian理论,对三维Anti de Sitter空间中Lorentzian曲面进行了研究.引入光维高度函数概念研究了三维Anti de Sitter空间Lorentzian曲面的S1t×S1s-值、光锥Gauss映射的奇点,进行了奇点分类,揭示了类光Causs-kronecker曲率之间的关系;并研究了Lorentzian曲面的一些基本几何性质.
文摘It needs the foundation of system and the guarantee of organizational system for anti-corruption,but it is more necessary to build and form an effective anti-corruption mechanism,so that the anti-corruption can be really put into practice. Anti-corruption mechanism refers to a organic operation system of the interaction,interconnection and constraint between the constituent elements( parts) and elements of national anti-corruption,and as a system,anti-corruption mechanism should have the characteristics of system aticness,comprehensiveness,transparency,legalization,public participation,scientific dynam ic,and internationalism. The construction of deepening anti-corruption mechanism is the need for reconstructing the ruling legitimacy of the party and the governm ent. Adhering to the principle of treating both root causes and symptoms is necessary in the construction of anti-corruption m echanism,com bating and punishing corruption is an important part of anti-corruption,and the prevention and control of corruption is the basic project of anti-corruption. Therefore,the construction of prevention and control mechanism in the anti-corruption mechanism has a more far-reaching significance.
基金The project serial number 92B0716Shanghai Natural Science Foundation
文摘A research on the process of cotton fabric flame-re-tarding,anti-bacterial finishing and one-bath finish-ing of anti-bacterial and flame-retarding is discussed.The flame retardant agent was phosphorous-contained,and the bacteriostatic finishing agent named SFR-1 wassynthesized.The flame retardancy of the fabric finishedcan meet the DOC FF3-71 Children Sleepwear Stan-dard.Its bacterial inhibiting capacity can meet and ex-ceed the requirements of similar products
文摘Friction spun core yarn has two components: filament core and staple fiber sheath. Under axial rubbing action, the failure mode of the core yarn is the stripping of the sheath from the core. This paper introduces a method to test the anti - stripping property of the core yarn. With a modified Universal Testing Machine, the stripping resistance of friction spun core yarn can be continuously measured. Some factors Influencing the measurements are discussed in detail. The testing results are compared with those from a Y731 Yarn Abrasion Tester and fur - ther confirmed by weaving practice.
文摘Since ancient times, traditional medicines have been in the usage for the treatment of Diabetes mellitus. An edible fruit from traditional medicinal plant Capparis zeylanica (CZ) was studied for its anti diabetic, insulin secretagogue activities and mechanisms involved in it. In Streptozotocin induced diabetes rats, oral administration of Capparis zeylanica methanolic extract (CZME) (200 mg/kg body weight) for 28 days showed a significant reduction in blood glucose levels by 35.53% and enhanced circulating insulin levels by 81.82% than the diabetic control rats. The insulin secretagogue activity mechanisms of the extract were evaluated by using mouse insulinoma beta cell line (MIN6-β). The extract stimulated insulin release in dependent manner of glucose concentration (3 - 16.7 mM) and extract dose (5 - 500 μg/mL). The insulin releasing effect of the extract was significantly enhanced by 3-isobutyl-1-methyl xanthine, glibenclamide, elevated extracellular calcium and K+ depolarized media. This insulin release was significantly reduced in calcium blocking conditions (by nifedipine and EGTA), in the presence of potassium channel opener (diazoxide). Hence, anti diabetic activity of CZME might be a result of its stimulatory effect on insulin release from pancreatic beta cells via KATP channel dependent and independent ways. These results indicate that CZ fruits have the potential to use in diabetes therapy.
文摘In this work, the exp(-φ (ξ )) -expansion method is used for the first time to investigate the exact traveling wave solutions involving parameters of nonlinear evolution equations. When these parameters are taken to be special values, the solitary wave solutions are derived from the exact traveling wave solutions. The validity and reliability of the method are tested by its applications to Nano-ionic solitons wave’s propagation along microtubules in living cells and Nano-ionic currents of MTs which play an important role in biology.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.51306018,51536008 and 51179091)
文摘The present paper focuses on the erosive cavitation behavior around a plane convex hydrofoil. The Zwart-Gerber-Belamri cavitation model is implemented in a library form to be used with the OpenFOAM. The implicit large eddy simulation （ILES） is app- lied to analyze the three-dimensional unsteady cavitating flow around a plane convex hydrofoil. The numerical results in the cases under the hydrodynamic conditions, which were experimentally tested at the high speed cavitation tunnel of the l^cole Polytechnique F6d＆ale de Lausanne （EPFL）, clearly show the sheet cavitation development, the shedding and the collapse of vapor clouds. It is noted that the cavitation evolutions including the maximum vapor length, the detachment and the oscillation frequency, are captured fairly well. Furthermore, the pressure pulses due to the cavitation development as well as the complex vortex structures are reasona- bly well predicted. Consequently, it may be concluded that the present numerical method can be used to investigate the unsteady cavitation around hydrofoils with a satisfactory accuracy.
