Plasma electrolytic oxidation(PEO)is a promising surface treatment to generate adherent and thick anti-corrosive coating on light-weight metals(Al,Mg,Ti,etc.)using an eco-friendly alkaline electrolyte.High energy plas...Plasma electrolytic oxidation(PEO)is a promising surface treatment to generate adherent and thick anti-corrosive coating on light-weight metals(Al,Mg,Ti,etc.)using an eco-friendly alkaline electrolyte.High energy plasma,however,inevitably generates porous structures that limit their practical performance.The present study proposes a straight-forward simple method by utilizing sub-zero electrolyte(268 K)to alter the plasma characteristics during formation of the protective coating on AZ31 Mg alloy via PEO with a comparison to the electrolyte at room temperature(298 K).In refrigerated electrolyte,the formation of micro-defects is suppressed relatively at the expense of low coating growth,which is measured to be twice lower than that at 298 K due to the temperature-dependent soft plasma discharges contributing to the development of the present coating.As a consequence,corrosion resistance of the sample processed at 268 K is superior to that of 298K,implying that the effect of coating thickness is less dominant than that of compactness.This phenomenon is interpreted in relation to the ionic movement and oxide solidification controlled by soft plasma discharges arising from the temperature gradient between electrolyte and surface of the substrate during PEO.展开更多
Fluororesin-based anti-corrosive coatings including graded FEP/PPS were prepared on carbon steel by melt powder coating, the bonding strength of all coating systems was determined by the pull-off test. It is found tha...Fluororesin-based anti-corrosive coatings including graded FEP/PPS were prepared on carbon steel by melt powder coating, the bonding strength of all coating systems was determined by the pull-off test. It is found that the poor adhesion of fluororesin coatings to metallic substrates is improved obviously by the graded coating structure of FEP/PPS, and the bonding strength reaches up to 11.8 MPa for the five-layer system. Examination by electron probe microanalysis (EPMA) verifies that the distribution of main components is graded in the five-layer system, which is responsible for the enhancement of the interfacial bonding.展开更多
Dendrites growth,chemical corrosion,and hydrogen evolution reaction(HER)on zinc anodes are the main barriers for the development of aqueous zinc-ion batteries(AZIBs).Constructing interfacial protec-tive layer is an ef...Dendrites growth,chemical corrosion,and hydrogen evolution reaction(HER)on zinc anodes are the main barriers for the development of aqueous zinc-ion batteries(AZIBs).Constructing interfacial protec-tive layer is an effective way to alleviate the side reactions on the anodes.Herein,Cu/Ti_(3)C_(2)Cl_(2)MXene(CMX)with high zincophilic and hydrophobic property is prepared by the lewis molten salts etching method,and the CMX interface protection layer is constructed by a simple spin coating.The CMX coat-ing layer can provide abundant nucleation sites and uniformize the charge distribution through the zin-cophilic Ti_(3)C_(2)Cl_(2)MXene matrix,leading to homogenous Zn deposition.In addition,the hydrophobic coat-ing contained anti-corrosive Cu nanoparticles can prevent the Zn anode from the electrolyte,beneficial for suppressing the chemical corrosion and HER.Therefore,the stable and reversible Zn plating/stripping is achieved for the Zn anode coated by the CMX,which exhibits the lifespan of over 1400 h at 0.5 mA cm^(−2),and even can steadily run for 700 h with 65 mV at 10 mA cm^(−2).Furthermore,CMX@Zn shows a high coulombic efficiency of over 100%for 3800 cycles,which indicates that the CMX@Zn electrode has excellent stability and reversibility of Zn stripping/plating.The full batteries assembled with ZnCoMnO/C(ZCM)cathodes also exhibits higher capacity(450.6 mAh g^(−1)at 0.1 A g^(−1))and cycle stability(capacity retention of 70%after 1500 cycles).This work enhanced the lifespan of AZIBs and broaden the research of multifunctional coating layer to other secondary batteries based on metal anodes.展开更多
The combination of high efficiency and environmental stability is vital to promote the commercial appli-cations of microwave absorption(MA)materials,yet remains challenging in the absence of facile routes.Here,we put ...The combination of high efficiency and environmental stability is vital to promote the commercial appli-cations of microwave absorption(MA)materials,yet remains challenging in the absence of facile routes.Here,we put forward a graphene-reinforced construct approach for one-pot synthesis of 3D intercon-nected magnetic-dielectric frameworks via pre-functionalization and subsequent assembly.Multiple in-teractions among discrete precursors are capable of manipulating the confined growth and interfacial self-assembly.Significant enhancements in MA properties are triggered in a straightforward manner us-ing ultralow feeding fractions of graphene oxide nanosheet.The minimum reflection loss is up to-60.1 dB(99.9999%wave absorption)and the effective absorption bandwidth reaches 5.9 GHz(almost covering the Ku band).Remarkably,based on the optimization by ultralow concentrations of graphene,the as-prepared nanoarchitecture simultaneously integrates strong absorption,broad bandwidth,and low matching thick-ness.The embedded graphene nanosheets serve as high-speed electron transmission channels and hollow resonance cavities,facilitating multimode attenuations and impedance-matching characteristics.Mean-while,the graphene-reinforced framework suppresses the corrosion of magnetic components,whose cor-rosion rate reduces by an order of magnitude.This study provides a simple procedure to boost magnetic-dielectric absorbers for comprehensive MA performances and enhanced corrosion resistance.展开更多
Poly(N-ethylaniline)(PNEA)composites with varying silicate content were fabricated on copper through a novel electropolymerized strategy in acidic solution.Thickness,compactness,conductivity and adhesive strength of t...Poly(N-ethylaniline)(PNEA)composites with varying silicate content were fabricated on copper through a novel electropolymerized strategy in acidic solution.Thickness,compactness,conductivity and adhesive strength of the composite(PNEA-10 Si)were optimized as silicate content reached 10 m M.Electrochemical,morphological and solution analyses were employed to evaluate the protective performance of PNEA and PNEA-10 Si coatings for copper in 3.5%Na Cl solution.Results of electrochemical analyses indicated that as-prepared coatings retarded the oxygen reduction process efficiently for copper in 3.5%Na Cl solution,drained corrosion current density and elevated interfacial charge transfer resistance.Due to favorable barrier effect,compact structure and low porosity index,PNEA-10 Si composite exhibited superior anti-corrosive performance,which was more tolerant than PNEA during long-time immersion.PNEA-10 Si coated sample exhibited a stable topography after 144 h immersion with the minimum concentration of released ions revealing the improved protection capacity.Electronic/atomic-multiscale calculations were conducted to clarify the deposition and protection mechanism of as-prepared coatings.Outcomes of density functional theory corroborated that silicate is stabilized in the PNEA layer via electrostatic force;and immobile silicate positively contributed to the charge transfer barrier of the composite.Molecular dynamics simulations evidenced that the favorable compatibility between PNEA and silicate facilitated polymer deposition and confined in-situ ions diffusion.展开更多
For the aqueous Zn-ion battery,dendrite formation,corrosion,and interfacial parasitic reactions are major issues,which greatly inhibits their practical application.How to develop a method of Zn construction or treatme...For the aqueous Zn-ion battery,dendrite formation,corrosion,and interfacial parasitic reactions are major issues,which greatly inhibits their practical application.How to develop a method of Zn construction or treatment to solve these issues for Zn anodes are still great challenges.Herein,a simple and cheap metal passivation technique is proposed for Zn anodes from a corrosion science perspective.Similar to the metal anticorrosion engineering,the formed interfacial protective layer in a chemical way can sufficiently solve the corrosion issues.Furthermore,the proposed passivity approach can reconstruct Zn surface-preferred crystal planes,exposing more(002)planes and improving surface hydrophilicity,which inhibits the formation of Zn dendrites and hydrogen evolution effectively.As expected,the passivated Zn achieves outstanding cycling life(1914 h)with low voltage polarization(<40 mV).Even at 6 mA cm^(−2) and 3 mA h cm^(−2),it can achieve stable Zn deposition over 460 h.The treated Zn anode coupled with MnO_(2) cathode shows prominently reinforced full batteries service life,making it a potential Zn anode candidate for excellent performance aqueous Zn-ion batteries.The proposed passivation approach provides a guideline for other metal electrodes preparation in various batteries and establishes the connections between corrosion science and batteries.展开更多
α-Fe_(2)O_(3)/epoxy resin composite superhydrophobic coating was prepared withα-Fe_(2)O_(3) nanoparticles and epoxy resin by spin coating method.The coating without epoxy resin has higher contact angle(CA)and lower ...α-Fe_(2)O_(3)/epoxy resin composite superhydrophobic coating was prepared withα-Fe_(2)O_(3) nanoparticles and epoxy resin by spin coating method.The coating without epoxy resin has higher contact angle(CA)and lower ice adhesion strength(IAS),but the mechanical properties are poor.Theα-Fe_(2)O_(3)/epoxy resin composite superhydrophobic coating exhibits good mechanical durability.In addition,compared with the bare aluminum substrate,the Ecorr of the composite coating is positive and the Jcorr is lower.The inhibition efficiency of the composite coating is as high as 99.98%in 3.5 wt%NaCl solution.The difference in the microstructure caused by the two preparation methods leads to the changes in mechanical properties and corrosion resistance of composite superhydrophobic coating.展开更多
In order to prepare ornamental and anti-corrosive coating on aluminum alloys, preparation technology of black micro-arc ceramic coatings on Al alloys in silicate based electrolyte was studied. The influence of content...In order to prepare ornamental and anti-corrosive coating on aluminum alloys, preparation technology of black micro-arc ceramic coatings on Al alloys in silicate based electrolyte was studied. The influence of content of Na2WO4 and combination additive in solution on the performance of black ceramic coatings was studied; the anticorrosion performances of black ceramic coatings were evaluated through whole-immersion test and electrochemical method in 3.5% NaCl solution at different pH value; SEM and XRD were used to analyze the surface morphology and phase constitutes of the black ceramic coatings. Experimental results indicated that, without combination additives, with the increasing of Na2WO4 content in the electrolyte, ceramic coating became darker and thicker, but the color was not black; after adding combination additive, the coating turned to be black; the black ceramic coating was multi-hole form in surface. There was a small quantity of tungsten existing in the black ceramic coating beside α-Al2O3 phase and β-Al2O3 phase. And aluminum alloy with black ceramic coating exhibited excellent anti-corrosion property in acid, basic and neutral 3.5% NaCl solution.展开更多
Developing highly efficient magnetic microwave absorb-ers(MAs)is crucial,and yet challenging for anti-corrosion properties in extremely humid and salt-induced foggy environments.Herein,a dual-oxide shell of ZnO/Al_(2)...Developing highly efficient magnetic microwave absorb-ers(MAs)is crucial,and yet challenging for anti-corrosion properties in extremely humid and salt-induced foggy environments.Herein,a dual-oxide shell of ZnO/Al_(2)O_(3) as a robust barrier to FeSiAl core is introduced to mitigate corrosion resistance.The FeSiAl@ZnO@Al_(2)O_(3) layer by layer hybrid structure is realized with atomic-scale precision through the atomic layer deposition technique.Owing to the unique hybrid structure,the FeSiAl@ZnO@Al_(2)O_(3) exhibits record-high micro-wave absorbing performance in low-frequency bands covering L and S bands with a minimum reflection loss(RLmin)of-50.6 dB at 3.4 GHz.Compared with pure FeSiAl(RLmin of-13.5 dB,a bandwidth of 0.5 GHz),the RLmin value and effective bandwidth of this designed novel absorber increased up to~3.7 and~3 times,respectively.Fur-thermore,the inert ceramic dual-shells have improved 9.0 times the anti-corrosion property of FeSiAl core by multistage barriers towards corrosive medium and obstruction of the electric circuit.This is attributed to the large charge transfer resistance,increased impedance modulus|Z|0.01 Hz,and frequency time constant of FeSiAl@ZnO@Al_(2)O_(3).The research demonstrates a promising platform toward the design of next-generation MAs with improved anti-corrosion properties.展开更多
Methods for evaluating the resistance to cathodic disbondment (RCD) of anti-corrosion coatings on buried pipelines were reviewed. It is obvious that these traditional cathodic disbondment tests (CDT) have some dis...Methods for evaluating the resistance to cathodic disbondment (RCD) of anti-corrosion coatings on buried pipelines were reviewed. It is obvious that these traditional cathodic disbondment tests (CDT) have some disadvantages and the evaluated results are only simple figures and always rely on the subjective experience of the operator. A new electrochemical method for evaluating the RCD of coatings, that is, the potentiostatic evaluation method (PEM), was developed and studied. During potentiostatic anodic polarization testing, the changes of stable polarization current of specimens before and after cathodic disbonding (CD) were measured, and the degree of cathodic disbondment of the coating was quantitatively evaluated, among which the equivalent cathodic disbonded distance AD was suggested as a parameter for evaluating the RCD. A series of testing parameters of the PEM were determined in these experiments.展开更多
In the study organic-inorganic hybrid composite, epoxy modified silicone coating and vinyl ester flake mastic were comparatively used as several anti-corrosion materials that provided protection for flue gas desulfu-r...In the study organic-inorganic hybrid composite, epoxy modified silicone coating and vinyl ester flake mastic were comparatively used as several anti-corrosion materials that provided protection for flue gas desulfu-rization (FGD). The relationship between curing conversion rate of hybrid polymer and temperature was investigated by differential scanning calorimeter (DSC). The adhesion strength, coefficient of thermal expansion and flame retardant properties of three anti-corrosion materials were measured and analyzed. A corrosion test in 8% H2SO4 and 5% HCl at temperature cycle of 40°C~ 160°C was applied to study corrosion resistance of several anti-corrosion materials. Gravimetric measurement and morphological observation of three materials before and after corrosion test were comparatively analyzed in the paper. The small weight change and good morphological structure of hybrid composite during corrosion test demonstrate that hybrid composite has better anti-corrosion properties than epoxy modified silicone coating and vinyl ester flake mastic.展开更多
Novel hybrid coatings on pure magnesium were prepared by combining plasma electrolytic carburizing(PEC)with micro-arc oxidation(MAO)to further enhance the anti-corrosion property in this paper.Scanning electron micros...Novel hybrid coatings on pure magnesium were prepared by combining plasma electrolytic carburizing(PEC)with micro-arc oxidation(MAO)to further enhance the anti-corrosion property in this paper.Scanning electron microscopy(SEM)was used to observe the microstructure of the coatings,meanwhile,energy dispersive spectrometry(EDS)and X-ray diffraction(XRD)were separately used to investigate the elemental as well as phase compositions of the coatings.The anti-corrosion property of the coatings was evaluated by potentiodynamic polarization curves as well as electrochemical impedance spectroscopy(EIS).The results show that PEC process is closely related with the effects of adsorption as well as diffusion of the activated carbon atoms,and it can provide a favorable pretreatment surface with predesigned chemical composition to obtain a new kind of phase,namely Si C with superior corrosion resistance and chemical stability,in the following PEC+MAO hybrid coatings.Meanwhile,PEC preprocessing also can afford an excellent micro-structure to increase the coating thickness as well as to improve the compactness of the PEC+MAO hybrid coatings.During the fabrication process of the PEC+MAO hybrid coatings,an overlapping phenomenon in regard to coating thickness can be observed instead of heaping up layer by layer.Compared with both single PEC surface modification layers as well as single MAO coatings,the PEC+MAO hybrid coatings exhibit more superior anti-corrosion property.Especially,the EIS data reveal that the PEC+MAO hybrid coatings can act as an effective protection system to provide relatively excellent long-range anti-corrosion protection.Note also that employing same MAO technique for both single MAO treatment as well as PEC+MAO combining procedure is the key to this research.展开更多
In this work, graphene-modified epoxy-based anti-corrosion coatings were prepared and the influence of graphene on the anti-corrosion performance of the epoxy-based coatings was investigated with water contact angle t...In this work, graphene-modified epoxy-based anti-corrosion coatings were prepared and the influence of graphene on the anti-corrosion performance of the epoxy-based coatings was investigated with water contact angle test ,chemical solution immersion test, and electrochemical test. The water contact angle and chemical solution resistance of the epoxy-based coatings were improved with an increase in graphene content from 0 to 0.4%. These results prove that addition of graphene can significantly improve the hydrophobicity and impermeability of epoxy- based coatings. However, when the graphene content was increased to 0.5%, the performance of the epoxy-based coatings decreased because of graphene aggregation. Tafel polarization results show that graphene addition can significantly reduce the corrosion current density and corrosion potential of epoxy-based coatings, which enhance their anti-corrosion performance.展开更多
Aqueous zinc-ion batteries have attracted much attention due to their high theoretical capacity,low cost high safety,and eco-friendly.However,challenges such as dendrite growth and side reactions severely hinder the e...Aqueous zinc-ion batteries have attracted much attention due to their high theoretical capacity,low cost high safety,and eco-friendly.However,challenges such as dendrite growth and side reactions severely hinder the electrochemical performance of the Zn anode,leading to low Coulombic efficiency(CE)or even short circuits Herein,phenolic resin(PF)is used as a protective coating on the surface of the zinc metal electrode.The PF layer can greatly improve the corrosion resistance of the Zn electrode in the electrolyte.Importantly,this artificial electrode/electrolyte interphase also elevates the nucleation barrier and restrains Zn^(2+)2D diffusion,regulating the zinc deposition/dissolution behavior.As a result,PF@Zn symmetric cells exhibit superior performance than that of bare Zn symmetric cells,achieving a stable and dendrite-free cycle of 1400 h.Furthermore,the carbon nanotube MnO_(2)||PF@Zn(CNT/MnO_(2)||PF@Zn)full cell also delivers a long cycle life with a high-capacity retention of about 180.0 m Ah·g^(-1)after 1400 cycles,far exceeding that of bare Zn anode.This work provides a facile strategy for achieving a dendrite-free and rechargeable zinc anode.展开更多
The effect of cerium dioxide(CeO_2)as an additive on the structure and properties of a melting type coating has been studied by means of microhardness measurement,scanning electron microscopy and thermal analysis. The...The effect of cerium dioxide(CeO_2)as an additive on the structure and properties of a melting type coating has been studied by means of microhardness measurement,scanning electron microscopy and thermal analysis. The results show that cerium dioxide can modify the microstructure and tribological properties of the coating. Model LIC-23 composite coating which contains CeO_2 performs well as a self-lubricating coating in hydrochloric acid solution.展开更多
As a passive anti-icing strategy,properly designed superhydrophobic coatings can demonstrate outstanding performances.However,common preparation strategies for superhydrophobic coatings often lead to environmental pol...As a passive anti-icing strategy,properly designed superhydrophobic coatings can demonstrate outstanding performances.However,common preparation strategies for superhydrophobic coatings often lead to environmental pollution,high energy-consumption,high-cost and other undesirable issues.Besides,the durability of superhydrophobic coating also plagues its commercial application.In this paper,we introduced a facile and environment-friendly technique for fabricating abrasion-resistant superhydrophobic surfaces using thermoplastic polyurethane(TPU)and modified SiO_(2)particles(SH-SiO_(2)).Both materials are non-toxicity,low-cost,and commercial available.Our methodology has the following advantages:use of minimal amounts of formulation,take the most streamlined technical route,and no waste material.These advantages make it attractive for industrial applications,and its usage sustainability can be promised.In this study,the mechanical stability of the superhydrophobic surface was evaluated by linear wear test.It is found that the excellent wear resistance of the superhydrophobic coating benefits from the characteristics of raw materials,the preparation strategy,and the special structure.In anti-icing properties test,the TPU/SH-SiO_(2)coating exhibits the repellency to the cold droplets and the ability to extend the freezing time.The electrochemical corrosion measurement shows that the asprepared superhydrophobic surface has excellent corrosion resistance that can provide effective protection for the bare Q235 substrates.These results indicate that the TPU/SH-SiO_(2)coating possesses good abrasion resistance and has great potential in anti-corrosion and anti-icing applications.展开更多
A novel enviromental protective water based metallic coating were prepared on the surface of AZ91D magnesium alloy. The properties and structure of the coating were investigated by adhension test, hardness test, heat ...A novel enviromental protective water based metallic coating were prepared on the surface of AZ91D magnesium alloy. The properties and structure of the coating were investigated by adhension test, hardness test, heat resisting test, neutral salt spray test and scanning electron microscopy (SEM). The results show that the coating has a stepped structure which can achieve good adhesion of first-grade, heat resistance temperature of 400℃, hardness of HV_ 0.50/30210 and anti-corrosion time of 250h in salt spray test. Meanwhile, the film forming and corrosion mechanism of the coating were also put forward based on the results of the Fourier transform infrared spectroscopy (FTIR) test and electrochemical impedance spectroscopy (EIS) test.展开更多
A TiO_(2)@o-vanillin@TEOS-APTES nanocontainer was prepared by an experimental process in which,firstly,2-hydroxy-3-methoxybenzaldehyde(o-vanillin)was loaded in a TiO_(2) container to obtain TiO_(2)@o-vanillin.Then,TiO...A TiO_(2)@o-vanillin@TEOS-APTES nanocontainer was prepared by an experimental process in which,firstly,2-hydroxy-3-methoxybenzaldehyde(o-vanillin)was loaded in a TiO_(2) container to obtain TiO_(2)@o-vanillin.Then,TiO_(2)@o-vanillin was encapsulated by tetraethyl orthosilicate(TEOS).Finally,3-aminopropyl triethoxysilane(APTES)was used to modify the obtained sample.The morphology,structural phase and thermal stability of the TiO_(2)@o-vanillin@TEOS-APTES nanocontainer were analyzed using scanning electron microscopy(SEM),energy dispersive spectroscopy(EDS),Fourier transform infrared spectroscopy(FTIR),X-ray diffractometry(XRD)and thermal gravimetric analysis(TG).The release rate of o-vanillin was investigated using an ultraviolet-visible(UV-vis)spectrometer.The anti-corrosion performances of the epoxy,epoxy@o-vanillin and epoxy@TiO_(2)@o-vanillin@TEOS-APTES coatings on steel sheets were evaluated using an electrochemical method and scarification experiments.The results showed that the impedance value of the epoxy@TiO_(2)@o-vanillin@TEOS-APTES coating was two orders of magnitude higher than that of the blank epoxy coating,and one order of magnitude higher than that of the epoxy@o-vanillin coating.The maximum inhibition rate of the epoxy@TiO_(2)@o-vanillin@TEOS-APTES coating on the steel can reach 97.3%.The scarification experiments confirmed that the epoxy@TiO_(2)@o-vanillin@TEOS-APTES coating had the best anti-corrosion performance.展开更多
Through the introduction of the anti-corrosion test schemes, the test equipments and the test procedure for three kinds of basal slop protection materials including fence, mixed stump and geo-textile, this paper comes...Through the introduction of the anti-corrosion test schemes, the test equipments and the test procedure for three kinds of basal slop protection materials including fence, mixed stump and geo-textile, this paper comes to a conclusion about the analysis of the anti-corrosion test, revealing that among all of the common basal slop protection materials, mixed stump and fence are with Class II anti-corrosion property, while the geo-textile is with the first-class anti-corrosion property.展开更多
Preparing polymeric coatings with well corrosion resistance and high thermal conductivity(TC)to prolong operational life and ensure service reliability of heat conductive metallic materials has long been a substantive...Preparing polymeric coatings with well corrosion resistance and high thermal conductivity(TC)to prolong operational life and ensure service reliability of heat conductive metallic materials has long been a substantive and urgent need while a difficult task.Here we report a multifunctional epoxy composite coating(F-CB/CEP)by synthesizing cerium methacrylate and ingeniously using it as a novel curing agent with corrosion inhibit for epoxy resin and modifier for boron nitride through"cation-π"interaction.The prepared F-CB/CEP coating presents a high TC of 4.29 W m^(−1)K^(−1),which is much higher than other reported anti-corrosion polymer coatings and thereby endowing metal materials coated by this coating with outstanding thermal management performance compared with those coated by pure epoxy coating.Meanwhile,the low-frequency impedance remains at 5.1×10^(11)Ωcm^(2)even after 181 days of immersion in 3.5 wt%NaCl solution.Besides,the coating also exhibits well hydrophobicity,self-cleaning properties,temperature resistance and adhesion.This work provides valuable insights for the preparation of high-performance composite coatings with potential to be used as advanced multifunctional thermal management materials,especially for heat conduction metals protection.展开更多
基金the Mid-Level Researcher National Project of the National Research Foundation(NRF)funded by the Ministry of Science and ICT,Republic of Korea(NRF-2020R1A2C2004192)supported partly by the Competency Development Program for Industry Specialist of the Korea Institute for Advancement of Technology(KIAT)funded by the Ministry of Trade,Industry,and Energy,Republic of Korea(P0002019)。
文摘Plasma electrolytic oxidation(PEO)is a promising surface treatment to generate adherent and thick anti-corrosive coating on light-weight metals(Al,Mg,Ti,etc.)using an eco-friendly alkaline electrolyte.High energy plasma,however,inevitably generates porous structures that limit their practical performance.The present study proposes a straight-forward simple method by utilizing sub-zero electrolyte(268 K)to alter the plasma characteristics during formation of the protective coating on AZ31 Mg alloy via PEO with a comparison to the electrolyte at room temperature(298 K).In refrigerated electrolyte,the formation of micro-defects is suppressed relatively at the expense of low coating growth,which is measured to be twice lower than that at 298 K due to the temperature-dependent soft plasma discharges contributing to the development of the present coating.As a consequence,corrosion resistance of the sample processed at 268 K is superior to that of 298K,implying that the effect of coating thickness is less dominant than that of compactness.This phenomenon is interpreted in relation to the ionic movement and oxide solidification controlled by soft plasma discharges arising from the temperature gradient between electrolyte and surface of the substrate during PEO.
文摘Fluororesin-based anti-corrosive coatings including graded FEP/PPS were prepared on carbon steel by melt powder coating, the bonding strength of all coating systems was determined by the pull-off test. It is found that the poor adhesion of fluororesin coatings to metallic substrates is improved obviously by the graded coating structure of FEP/PPS, and the bonding strength reaches up to 11.8 MPa for the five-layer system. Examination by electron probe microanalysis (EPMA) verifies that the distribution of main components is graded in the five-layer system, which is responsible for the enhancement of the interfacial bonding.
基金supported by the Natural Science Foundation of China(No.51962032)the program for Strong Youth Technology Leading Talents in Bingtuan Technological Innovation Talents(No.2023CB008-11)+1 种基金the Youth Innovative Top Talents Fund,Shihezi University(No.CXBJ202203)Youth Science and Technology Innovation Leading Talent Fund,Bashi Shihezi(No.2023RC02).
文摘Dendrites growth,chemical corrosion,and hydrogen evolution reaction(HER)on zinc anodes are the main barriers for the development of aqueous zinc-ion batteries(AZIBs).Constructing interfacial protec-tive layer is an effective way to alleviate the side reactions on the anodes.Herein,Cu/Ti_(3)C_(2)Cl_(2)MXene(CMX)with high zincophilic and hydrophobic property is prepared by the lewis molten salts etching method,and the CMX interface protection layer is constructed by a simple spin coating.The CMX coat-ing layer can provide abundant nucleation sites and uniformize the charge distribution through the zin-cophilic Ti_(3)C_(2)Cl_(2)MXene matrix,leading to homogenous Zn deposition.In addition,the hydrophobic coat-ing contained anti-corrosive Cu nanoparticles can prevent the Zn anode from the electrolyte,beneficial for suppressing the chemical corrosion and HER.Therefore,the stable and reversible Zn plating/stripping is achieved for the Zn anode coated by the CMX,which exhibits the lifespan of over 1400 h at 0.5 mA cm^(−2),and even can steadily run for 700 h with 65 mV at 10 mA cm^(−2).Furthermore,CMX@Zn shows a high coulombic efficiency of over 100%for 3800 cycles,which indicates that the CMX@Zn electrode has excellent stability and reversibility of Zn stripping/plating.The full batteries assembled with ZnCoMnO/C(ZCM)cathodes also exhibits higher capacity(450.6 mAh g^(−1)at 0.1 A g^(−1))and cycle stability(capacity retention of 70%after 1500 cycles).This work enhanced the lifespan of AZIBs and broaden the research of multifunctional coating layer to other secondary batteries based on metal anodes.
基金support from the National Natural Science Foundation of China(No.52073039)Major Special Projects of Sichuan Province(Nos.2019ZDZX0027 and 2019ZDZX0016).
文摘The combination of high efficiency and environmental stability is vital to promote the commercial appli-cations of microwave absorption(MA)materials,yet remains challenging in the absence of facile routes.Here,we put forward a graphene-reinforced construct approach for one-pot synthesis of 3D intercon-nected magnetic-dielectric frameworks via pre-functionalization and subsequent assembly.Multiple in-teractions among discrete precursors are capable of manipulating the confined growth and interfacial self-assembly.Significant enhancements in MA properties are triggered in a straightforward manner us-ing ultralow feeding fractions of graphene oxide nanosheet.The minimum reflection loss is up to-60.1 dB(99.9999%wave absorption)and the effective absorption bandwidth reaches 5.9 GHz(almost covering the Ku band).Remarkably,based on the optimization by ultralow concentrations of graphene,the as-prepared nanoarchitecture simultaneously integrates strong absorption,broad bandwidth,and low matching thick-ness.The embedded graphene nanosheets serve as high-speed electron transmission channels and hollow resonance cavities,facilitating multimode attenuations and impedance-matching characteristics.Mean-while,the graphene-reinforced framework suppresses the corrosion of magnetic components,whose cor-rosion rate reduces by an order of magnitude.This study provides a simple procedure to boost magnetic-dielectric absorbers for comprehensive MA performances and enhanced corrosion resistance.
基金financially supported by the Beijing Municipal Natural Science Foundation(No.2192016)the National Natural Science Foundation of China(No.21606005)the Support Project of High-level Teachers in Beijing Municipal Universities in the Period of 13th Five-year Plan(No.CIT&TCD201904042)。
文摘Poly(N-ethylaniline)(PNEA)composites with varying silicate content were fabricated on copper through a novel electropolymerized strategy in acidic solution.Thickness,compactness,conductivity and adhesive strength of the composite(PNEA-10 Si)were optimized as silicate content reached 10 m M.Electrochemical,morphological and solution analyses were employed to evaluate the protective performance of PNEA and PNEA-10 Si coatings for copper in 3.5%Na Cl solution.Results of electrochemical analyses indicated that as-prepared coatings retarded the oxygen reduction process efficiently for copper in 3.5%Na Cl solution,drained corrosion current density and elevated interfacial charge transfer resistance.Due to favorable barrier effect,compact structure and low porosity index,PNEA-10 Si composite exhibited superior anti-corrosive performance,which was more tolerant than PNEA during long-time immersion.PNEA-10 Si coated sample exhibited a stable topography after 144 h immersion with the minimum concentration of released ions revealing the improved protection capacity.Electronic/atomic-multiscale calculations were conducted to clarify the deposition and protection mechanism of as-prepared coatings.Outcomes of density functional theory corroborated that silicate is stabilized in the PNEA layer via electrostatic force;and immobile silicate positively contributed to the charge transfer barrier of the composite.Molecular dynamics simulations evidenced that the favorable compatibility between PNEA and silicate facilitated polymer deposition and confined in-situ ions diffusion.
基金financialy supported by the National Key R&D Program of China(Grant No.2018YFB0905400)the National Natural Science Foundation of China(Grant Nos.22075331,51702376)+2 种基金the Fundamental Research Funds for the Central Universities(19lgzd02)the Guangdong Pearl River Talents Plan(2019QN01L117)the National Thousand Youth Talents Project of the Chinese Government
文摘For the aqueous Zn-ion battery,dendrite formation,corrosion,and interfacial parasitic reactions are major issues,which greatly inhibits their practical application.How to develop a method of Zn construction or treatment to solve these issues for Zn anodes are still great challenges.Herein,a simple and cheap metal passivation technique is proposed for Zn anodes from a corrosion science perspective.Similar to the metal anticorrosion engineering,the formed interfacial protective layer in a chemical way can sufficiently solve the corrosion issues.Furthermore,the proposed passivity approach can reconstruct Zn surface-preferred crystal planes,exposing more(002)planes and improving surface hydrophilicity,which inhibits the formation of Zn dendrites and hydrogen evolution effectively.As expected,the passivated Zn achieves outstanding cycling life(1914 h)with low voltage polarization(<40 mV).Even at 6 mA cm^(−2) and 3 mA h cm^(−2),it can achieve stable Zn deposition over 460 h.The treated Zn anode coupled with MnO_(2) cathode shows prominently reinforced full batteries service life,making it a potential Zn anode candidate for excellent performance aqueous Zn-ion batteries.The proposed passivation approach provides a guideline for other metal electrodes preparation in various batteries and establishes the connections between corrosion science and batteries.
基金Supported by the National Natural Science Foundation of China(No.51801058)the Special Program for Guiding Local Science and Technology Development by the Central Government of Hubei Province(No.2019ZYYD006)the Education and Teaching Research Project of Hubei Polytechnic University(No.2021B01)。
文摘α-Fe_(2)O_(3)/epoxy resin composite superhydrophobic coating was prepared withα-Fe_(2)O_(3) nanoparticles and epoxy resin by spin coating method.The coating without epoxy resin has higher contact angle(CA)and lower ice adhesion strength(IAS),but the mechanical properties are poor.Theα-Fe_(2)O_(3)/epoxy resin composite superhydrophobic coating exhibits good mechanical durability.In addition,compared with the bare aluminum substrate,the Ecorr of the composite coating is positive and the Jcorr is lower.The inhibition efficiency of the composite coating is as high as 99.98%in 3.5 wt%NaCl solution.The difference in the microstructure caused by the two preparation methods leads to the changes in mechanical properties and corrosion resistance of composite superhydrophobic coating.
基金This work was financially supported bythe Doctoral Foundation ofYanshan University(B41)theScience and Technology Foundation ofYanshan University(YDJJ0169).
文摘In order to prepare ornamental and anti-corrosive coating on aluminum alloys, preparation technology of black micro-arc ceramic coatings on Al alloys in silicate based electrolyte was studied. The influence of content of Na2WO4 and combination additive in solution on the performance of black ceramic coatings was studied; the anticorrosion performances of black ceramic coatings were evaluated through whole-immersion test and electrochemical method in 3.5% NaCl solution at different pH value; SEM and XRD were used to analyze the surface morphology and phase constitutes of the black ceramic coatings. Experimental results indicated that, without combination additives, with the increasing of Na2WO4 content in the electrolyte, ceramic coating became darker and thicker, but the color was not black; after adding combination additive, the coating turned to be black; the black ceramic coating was multi-hole form in surface. There was a small quantity of tungsten existing in the black ceramic coating beside α-Al2O3 phase and β-Al2O3 phase. And aluminum alloy with black ceramic coating exhibited excellent anti-corrosion property in acid, basic and neutral 3.5% NaCl solution.
基金financially supported by the National Natural Science Foundation of China(No.51972045,5197021414)the Fundamental Research Funds for the Chinese Central Universities,China(No.ZYGX2019J025)+4 种基金Sichuan Science and Technology Program(No.2020JDRC0015 and No.2020JDRC0045)Sichuan Science and Technology Innovation Talent Project(No.2021JDRC0021)the Vice-Chancellor fellowship scheme at RMIT Universitythe RMIT Micro Nano Research Facility(MNRF)in the Victorian node of the Australian National Fabrication Facility(ANFF)the RMIT Microscopy and Microanalysis Facility(RMMF)to support this work。
文摘Developing highly efficient magnetic microwave absorb-ers(MAs)is crucial,and yet challenging for anti-corrosion properties in extremely humid and salt-induced foggy environments.Herein,a dual-oxide shell of ZnO/Al_(2)O_(3) as a robust barrier to FeSiAl core is introduced to mitigate corrosion resistance.The FeSiAl@ZnO@Al_(2)O_(3) layer by layer hybrid structure is realized with atomic-scale precision through the atomic layer deposition technique.Owing to the unique hybrid structure,the FeSiAl@ZnO@Al_(2)O_(3) exhibits record-high micro-wave absorbing performance in low-frequency bands covering L and S bands with a minimum reflection loss(RLmin)of-50.6 dB at 3.4 GHz.Compared with pure FeSiAl(RLmin of-13.5 dB,a bandwidth of 0.5 GHz),the RLmin value and effective bandwidth of this designed novel absorber increased up to~3.7 and~3 times,respectively.Fur-thermore,the inert ceramic dual-shells have improved 9.0 times the anti-corrosion property of FeSiAl core by multistage barriers towards corrosive medium and obstruction of the electric circuit.This is attributed to the large charge transfer resistance,increased impedance modulus|Z|0.01 Hz,and frequency time constant of FeSiAl@ZnO@Al_(2)O_(3).The research demonstrates a promising platform toward the design of next-generation MAs with improved anti-corrosion properties.
基金This work is financially supported by the National Natural Science Foundation of China (No.2992021).
文摘Methods for evaluating the resistance to cathodic disbondment (RCD) of anti-corrosion coatings on buried pipelines were reviewed. It is obvious that these traditional cathodic disbondment tests (CDT) have some disadvantages and the evaluated results are only simple figures and always rely on the subjective experience of the operator. A new electrochemical method for evaluating the RCD of coatings, that is, the potentiostatic evaluation method (PEM), was developed and studied. During potentiostatic anodic polarization testing, the changes of stable polarization current of specimens before and after cathodic disbonding (CD) were measured, and the degree of cathodic disbondment of the coating was quantitatively evaluated, among which the equivalent cathodic disbonded distance AD was suggested as a parameter for evaluating the RCD. A series of testing parameters of the PEM were determined in these experiments.
文摘In the study organic-inorganic hybrid composite, epoxy modified silicone coating and vinyl ester flake mastic were comparatively used as several anti-corrosion materials that provided protection for flue gas desulfu-rization (FGD). The relationship between curing conversion rate of hybrid polymer and temperature was investigated by differential scanning calorimeter (DSC). The adhesion strength, coefficient of thermal expansion and flame retardant properties of three anti-corrosion materials were measured and analyzed. A corrosion test in 8% H2SO4 and 5% HCl at temperature cycle of 40°C~ 160°C was applied to study corrosion resistance of several anti-corrosion materials. Gravimetric measurement and morphological observation of three materials before and after corrosion test were comparatively analyzed in the paper. The small weight change and good morphological structure of hybrid composite during corrosion test demonstrate that hybrid composite has better anti-corrosion properties than epoxy modified silicone coating and vinyl ester flake mastic.
基金financially supported by the Creative Research Group Fund Grant of Gansu Province,China(1111RJDA011)。
文摘Novel hybrid coatings on pure magnesium were prepared by combining plasma electrolytic carburizing(PEC)with micro-arc oxidation(MAO)to further enhance the anti-corrosion property in this paper.Scanning electron microscopy(SEM)was used to observe the microstructure of the coatings,meanwhile,energy dispersive spectrometry(EDS)and X-ray diffraction(XRD)were separately used to investigate the elemental as well as phase compositions of the coatings.The anti-corrosion property of the coatings was evaluated by potentiodynamic polarization curves as well as electrochemical impedance spectroscopy(EIS).The results show that PEC process is closely related with the effects of adsorption as well as diffusion of the activated carbon atoms,and it can provide a favorable pretreatment surface with predesigned chemical composition to obtain a new kind of phase,namely Si C with superior corrosion resistance and chemical stability,in the following PEC+MAO hybrid coatings.Meanwhile,PEC preprocessing also can afford an excellent micro-structure to increase the coating thickness as well as to improve the compactness of the PEC+MAO hybrid coatings.During the fabrication process of the PEC+MAO hybrid coatings,an overlapping phenomenon in regard to coating thickness can be observed instead of heaping up layer by layer.Compared with both single PEC surface modification layers as well as single MAO coatings,the PEC+MAO hybrid coatings exhibit more superior anti-corrosion property.Especially,the EIS data reveal that the PEC+MAO hybrid coatings can act as an effective protection system to provide relatively excellent long-range anti-corrosion protection.Note also that employing same MAO technique for both single MAO treatment as well as PEC+MAO combining procedure is the key to this research.
文摘In this work, graphene-modified epoxy-based anti-corrosion coatings were prepared and the influence of graphene on the anti-corrosion performance of the epoxy-based coatings was investigated with water contact angle test ,chemical solution immersion test, and electrochemical test. The water contact angle and chemical solution resistance of the epoxy-based coatings were improved with an increase in graphene content from 0 to 0.4%. These results prove that addition of graphene can significantly improve the hydrophobicity and impermeability of epoxy- based coatings. However, when the graphene content was increased to 0.5%, the performance of the epoxy-based coatings decreased because of graphene aggregation. Tafel polarization results show that graphene addition can significantly reduce the corrosion current density and corrosion potential of epoxy-based coatings, which enhance their anti-corrosion performance.
基金supported by the National Natural Science Foundation of China(No.52201248)the Science and Technology Rising Star Project of Hebei University of Technology(No.JBKYXX2201)。
文摘Aqueous zinc-ion batteries have attracted much attention due to their high theoretical capacity,low cost high safety,and eco-friendly.However,challenges such as dendrite growth and side reactions severely hinder the electrochemical performance of the Zn anode,leading to low Coulombic efficiency(CE)or even short circuits Herein,phenolic resin(PF)is used as a protective coating on the surface of the zinc metal electrode.The PF layer can greatly improve the corrosion resistance of the Zn electrode in the electrolyte.Importantly,this artificial electrode/electrolyte interphase also elevates the nucleation barrier and restrains Zn^(2+)2D diffusion,regulating the zinc deposition/dissolution behavior.As a result,PF@Zn symmetric cells exhibit superior performance than that of bare Zn symmetric cells,achieving a stable and dendrite-free cycle of 1400 h.Furthermore,the carbon nanotube MnO_(2)||PF@Zn(CNT/MnO_(2)||PF@Zn)full cell also delivers a long cycle life with a high-capacity retention of about 180.0 m Ah·g^(-1)after 1400 cycles,far exceeding that of bare Zn anode.This work provides a facile strategy for achieving a dendrite-free and rechargeable zinc anode.
基金This is supported by the Youth Research Fund of Chinese Academy of Sciences
文摘The effect of cerium dioxide(CeO_2)as an additive on the structure and properties of a melting type coating has been studied by means of microhardness measurement,scanning electron microscopy and thermal analysis. The results show that cerium dioxide can modify the microstructure and tribological properties of the coating. Model LIC-23 composite coating which contains CeO_2 performs well as a self-lubricating coating in hydrochloric acid solution.
基金Financial support from the National Natural Science Foundation of China(No.21676216)Special project of Shaanxi Provincial Education Department,China(20JC034)+1 种基金Basic research program of Natural Science in Shaanxi Province,China(2019JLP-03)Innovation project of college students in Shaanxi Province,China(S202010697054)are gratefully acknowledged.
文摘As a passive anti-icing strategy,properly designed superhydrophobic coatings can demonstrate outstanding performances.However,common preparation strategies for superhydrophobic coatings often lead to environmental pollution,high energy-consumption,high-cost and other undesirable issues.Besides,the durability of superhydrophobic coating also plagues its commercial application.In this paper,we introduced a facile and environment-friendly technique for fabricating abrasion-resistant superhydrophobic surfaces using thermoplastic polyurethane(TPU)and modified SiO_(2)particles(SH-SiO_(2)).Both materials are non-toxicity,low-cost,and commercial available.Our methodology has the following advantages:use of minimal amounts of formulation,take the most streamlined technical route,and no waste material.These advantages make it attractive for industrial applications,and its usage sustainability can be promised.In this study,the mechanical stability of the superhydrophobic surface was evaluated by linear wear test.It is found that the excellent wear resistance of the superhydrophobic coating benefits from the characteristics of raw materials,the preparation strategy,and the special structure.In anti-icing properties test,the TPU/SH-SiO_(2)coating exhibits the repellency to the cold droplets and the ability to extend the freezing time.The electrochemical corrosion measurement shows that the asprepared superhydrophobic surface has excellent corrosion resistance that can provide effective protection for the bare Q235 substrates.These results indicate that the TPU/SH-SiO_(2)coating possesses good abrasion resistance and has great potential in anti-corrosion and anti-icing applications.
文摘A novel enviromental protective water based metallic coating were prepared on the surface of AZ91D magnesium alloy. The properties and structure of the coating were investigated by adhension test, hardness test, heat resisting test, neutral salt spray test and scanning electron microscopy (SEM). The results show that the coating has a stepped structure which can achieve good adhesion of first-grade, heat resistance temperature of 400℃, hardness of HV_ 0.50/30210 and anti-corrosion time of 250h in salt spray test. Meanwhile, the film forming and corrosion mechanism of the coating were also put forward based on the results of the Fourier transform infrared spectroscopy (FTIR) test and electrochemical impedance spectroscopy (EIS) test.
基金supported by the National Natural Science Foundation of China(21878024)the Innovation Team Project of Colleges and Universities in Liaoning Province(2018479-14,LT2015001).
文摘A TiO_(2)@o-vanillin@TEOS-APTES nanocontainer was prepared by an experimental process in which,firstly,2-hydroxy-3-methoxybenzaldehyde(o-vanillin)was loaded in a TiO_(2) container to obtain TiO_(2)@o-vanillin.Then,TiO_(2)@o-vanillin was encapsulated by tetraethyl orthosilicate(TEOS).Finally,3-aminopropyl triethoxysilane(APTES)was used to modify the obtained sample.The morphology,structural phase and thermal stability of the TiO_(2)@o-vanillin@TEOS-APTES nanocontainer were analyzed using scanning electron microscopy(SEM),energy dispersive spectroscopy(EDS),Fourier transform infrared spectroscopy(FTIR),X-ray diffractometry(XRD)and thermal gravimetric analysis(TG).The release rate of o-vanillin was investigated using an ultraviolet-visible(UV-vis)spectrometer.The anti-corrosion performances of the epoxy,epoxy@o-vanillin and epoxy@TiO_(2)@o-vanillin@TEOS-APTES coatings on steel sheets were evaluated using an electrochemical method and scarification experiments.The results showed that the impedance value of the epoxy@TiO_(2)@o-vanillin@TEOS-APTES coating was two orders of magnitude higher than that of the blank epoxy coating,and one order of magnitude higher than that of the epoxy@o-vanillin coating.The maximum inhibition rate of the epoxy@TiO_(2)@o-vanillin@TEOS-APTES coating on the steel can reach 97.3%.The scarification experiments confirmed that the epoxy@TiO_(2)@o-vanillin@TEOS-APTES coating had the best anti-corrosion performance.
文摘Through the introduction of the anti-corrosion test schemes, the test equipments and the test procedure for three kinds of basal slop protection materials including fence, mixed stump and geo-textile, this paper comes to a conclusion about the analysis of the anti-corrosion test, revealing that among all of the common basal slop protection materials, mixed stump and fence are with Class II anti-corrosion property, while the geo-textile is with the first-class anti-corrosion property.
基金supported by the National Science Foundation for Distinguished Young Scholars of China(Grant No.51925403)Major Research plan of the National Natural Science Foundation of China(Grant No.91934302)+2 种基金the National Science Foundation of China(21676052,21606042)Independent Innovation Fund of Tianjin University(2023XJD0050)Funding for National Key R&D Program of China(2022YFB3808800).
文摘Preparing polymeric coatings with well corrosion resistance and high thermal conductivity(TC)to prolong operational life and ensure service reliability of heat conductive metallic materials has long been a substantive and urgent need while a difficult task.Here we report a multifunctional epoxy composite coating(F-CB/CEP)by synthesizing cerium methacrylate and ingeniously using it as a novel curing agent with corrosion inhibit for epoxy resin and modifier for boron nitride through"cation-π"interaction.The prepared F-CB/CEP coating presents a high TC of 4.29 W m^(−1)K^(−1),which is much higher than other reported anti-corrosion polymer coatings and thereby endowing metal materials coated by this coating with outstanding thermal management performance compared with those coated by pure epoxy coating.Meanwhile,the low-frequency impedance remains at 5.1×10^(11)Ωcm^(2)even after 181 days of immersion in 3.5 wt%NaCl solution.Besides,the coating also exhibits well hydrophobicity,self-cleaning properties,temperature resistance and adhesion.This work provides valuable insights for the preparation of high-performance composite coatings with potential to be used as advanced multifunctional thermal management materials,especially for heat conduction metals protection.