To enhance the comprehensive performance of artillery internal ballistics—encompassing power,accuracy,and service life—this study proposed a multi-stage multidisciplinary design optimization(MS-MDO)method.First,the ...To enhance the comprehensive performance of artillery internal ballistics—encompassing power,accuracy,and service life—this study proposed a multi-stage multidisciplinary design optimization(MS-MDO)method.First,the comprehensive artillery internal ballistic dynamics(AIBD)model,based on propellant combustion,rotation band engraving,projectile axial motion,and rifling wear models,was established and validated.This model was systematically decomposed into subsystems from a system engineering perspective.The study then detailed the MS-MDO methodology,which included Stage I(MDO stage)employing an improved collaborative optimization method for consistent design variables,and Stage II(Performance Optimization)focusing on the independent optimization of local design variables and performance metrics.The methodology was applied to the AIBD problem.Results demonstrated that the MS-MDO method in Stage I effectively reduced iteration and evaluation counts,thereby accelerating system-level convergence.Meanwhile,Stage II optimization markedly enhanced overall performance.These comprehensive evaluation results affirmed the effectiveness of the MS-MDO method.展开更多
This paper proposes a non-intrusive uncertainty analysis method for artillery dynamics involving hybrid uncertainty using polynomial chaos expansion(PCE).The uncertainty parameters with sufficient information are rega...This paper proposes a non-intrusive uncertainty analysis method for artillery dynamics involving hybrid uncertainty using polynomial chaos expansion(PCE).The uncertainty parameters with sufficient information are regarded as stochastic variables,whereas the interval variables are used to treat the uncertainty parameters with limited stochastic knowledge.In this method,the PCE model is constructed through the Galerkin projection method,in which the sparse grid strategy is used to generate the integral points and the corresponding integral weights.Through the sampling in PCE,the original dynamic systems with hybrid stochastic and interval parameters can be transformed into deterministic dynamic systems,without changing their expressions.The yielded PCE model is utilized as a computationally efficient,surrogate model,and the supremum and infimum of the dynamic responses over all time iteration steps can be easily approximated through Monte Carlo simulation and percentile difference.A numerical example and an artillery exterior ballistic dynamics model are used to illustrate the feasibility and efficiency of this approach.The numerical results indicate that the dynamic response bounds obtained by the PCE approach almost match the results of the direct Monte Carlo simulation,but the computational efficiency of the PCE approach is much higher than direct Monte Carlo simulation.Moreover,the proposed method also exhibits fine precision even in high-dimensional uncertainty analysis problems.展开更多
The purpose of this development is to detect the parallelism between the breech horizontal platform and the datum tube axis of the rocket artillery. The located aiming mechanism at the muzzle and located adjustment me...The purpose of this development is to detect the parallelism between the breech horizontal platform and the datum tube axis of the rocket artillery. The located aiming mechanism at the muzzle and located adjustment mechanism at the breech are designed in the system. Besides those, the system also uses an autocollimator with accuracy of 1″ and a collimating mirror together to determine the axis of the datum tube. An electronic level with accuracy of 2″ is employed to measure and display the value of the included angle and the parameter of the inclined direction. The entire accuracy of this system is σ≤±9.1″. This paper describes the composition and the operating principle of the system and analyzes the accuracy. The development of this system supplies reliable measurement method for new rocket artilleries and artilleries, and this technology is of a good application prospect.展开更多
A numerical calculation method based on the finite element analysis of dynamic characteristics of artillery-fuze system is discussed in detail. Pretension element is used to mesh the couple structure between artillery...A numerical calculation method based on the finite element analysis of dynamic characteristics of artillery-fuze system is discussed in detail. Pretension element is used to mesh the couple structure between artillery and fuze to analyze the change of dynamic characteristics of artillery-fuze system when pre-tightening force varies between artillery and fuze. Numerical calculation of the finite element analysis and actual hammering test of a artillery-fuze system are carried out with the same input to verify the accuracy of numerical calculation. The results show that the finite element model of artillery-fuze system is credible and the calculation accuracy is perfect.展开更多
基金supported by the“National Natural Science Foundation of China”(Grant Nos.52105106,52305155)the“Jiangsu Province Natural Science Foundation”(Grant Nos.BK20210342,BK20230904)the“Young Elite Scientists Sponsorship Programby CAST”(Grant No.2023JCJQQT061).
文摘To enhance the comprehensive performance of artillery internal ballistics—encompassing power,accuracy,and service life—this study proposed a multi-stage multidisciplinary design optimization(MS-MDO)method.First,the comprehensive artillery internal ballistic dynamics(AIBD)model,based on propellant combustion,rotation band engraving,projectile axial motion,and rifling wear models,was established and validated.This model was systematically decomposed into subsystems from a system engineering perspective.The study then detailed the MS-MDO methodology,which included Stage I(MDO stage)employing an improved collaborative optimization method for consistent design variables,and Stage II(Performance Optimization)focusing on the independent optimization of local design variables and performance metrics.The methodology was applied to the AIBD problem.Results demonstrated that the MS-MDO method in Stage I effectively reduced iteration and evaluation counts,thereby accelerating system-level convergence.Meanwhile,Stage II optimization markedly enhanced overall performance.These comprehensive evaluation results affirmed the effectiveness of the MS-MDO method.
基金financially supported by the National Natural Science Foun-dation of China[Grant Nos.301070603,11572158]。
文摘This paper proposes a non-intrusive uncertainty analysis method for artillery dynamics involving hybrid uncertainty using polynomial chaos expansion(PCE).The uncertainty parameters with sufficient information are regarded as stochastic variables,whereas the interval variables are used to treat the uncertainty parameters with limited stochastic knowledge.In this method,the PCE model is constructed through the Galerkin projection method,in which the sparse grid strategy is used to generate the integral points and the corresponding integral weights.Through the sampling in PCE,the original dynamic systems with hybrid stochastic and interval parameters can be transformed into deterministic dynamic systems,without changing their expressions.The yielded PCE model is utilized as a computationally efficient,surrogate model,and the supremum and infimum of the dynamic responses over all time iteration steps can be easily approximated through Monte Carlo simulation and percentile difference.A numerical example and an artillery exterior ballistic dynamics model are used to illustrate the feasibility and efficiency of this approach.The numerical results indicate that the dynamic response bounds obtained by the PCE approach almost match the results of the direct Monte Carlo simulation,but the computational efficiency of the PCE approach is much higher than direct Monte Carlo simulation.Moreover,the proposed method also exhibits fine precision even in high-dimensional uncertainty analysis problems.
文摘The purpose of this development is to detect the parallelism between the breech horizontal platform and the datum tube axis of the rocket artillery. The located aiming mechanism at the muzzle and located adjustment mechanism at the breech are designed in the system. Besides those, the system also uses an autocollimator with accuracy of 1″ and a collimating mirror together to determine the axis of the datum tube. An electronic level with accuracy of 2″ is employed to measure and display the value of the included angle and the parameter of the inclined direction. The entire accuracy of this system is σ≤±9.1″. This paper describes the composition and the operating principle of the system and analyzes the accuracy. The development of this system supplies reliable measurement method for new rocket artilleries and artilleries, and this technology is of a good application prospect.
基金the Ministerial Level Advanced Research Foundation (5140C9384029389C475)
文摘A numerical calculation method based on the finite element analysis of dynamic characteristics of artillery-fuze system is discussed in detail. Pretension element is used to mesh the couple structure between artillery and fuze to analyze the change of dynamic characteristics of artillery-fuze system when pre-tightening force varies between artillery and fuze. Numerical calculation of the finite element analysis and actual hammering test of a artillery-fuze system are carried out with the same input to verify the accuracy of numerical calculation. The results show that the finite element model of artillery-fuze system is credible and the calculation accuracy is perfect.
