The control of large deformation problems in layered soft rock tunnels needs to solve urgently.The roof problem is particularly severe among the deformation issues in tunnels.This study first analyzes the asymmetric d...The control of large deformation problems in layered soft rock tunnels needs to solve urgently.The roof problem is particularly severe among the deformation issues in tunnels.This study first analyzes the asymmetric deformation modes in layered soft rock tunnels with large deformations.Subsequently,we construct a mechanical model under ideal conditions for controlling the roof of layered soft rock tunnels through high preload with the support of NPR anchor cables.The prominent roles of long and short NPR anchor cables in the support system are also analyzed.The results indicate the significance of high preload in controlling the roof of layered soft rock tunnels.The short NPR anchor cables effectively improve the integrity of the stratified soft rock layers,while the long NPR anchor cables effectively mobilize the self-bearing capacity of deep-stable rock layers.Finally,the high-preload support method with NPR anchor cables is validated to have a good effect on controlling large deformations in layered soft rock tunnels through field monitoring data.展开更多
Dynamic load on anchoring structures(AS)within deep roadways can result in cumulative damage and failure.This study develops an experimental device designed to test AS under triaxial loads.The device enables the inves...Dynamic load on anchoring structures(AS)within deep roadways can result in cumulative damage and failure.This study develops an experimental device designed to test AS under triaxial loads.The device enables the investigation of the mechanical response,failure mode,instability assessment criteria,and anchorage effect of AS subjected to combined cyclic dynamic-static triaxial stress paths.The results show that the peak bearing strength is positively correlated with the anchoring matrix strength,anchorage length,and edgewise compressive strength.The bearing capacity decreases significantly when the anchorage direction is severely inclined.The free face failure modes are typically transverse cracking,concave fracturing,V-shaped slipping and detachment,and spallation detachment.Besides,when the anchoring matrix strength and the anchorage length decrease while the edgewise compressive strength,loading rate,and anchorage inclination angle increase,the failure intensity rises.Instability is determined by a negative tangent modulus of the displacement-strength curve or the continued deformation increase against the general downward trend.Under cyclic loads,the driving force that breaks the rock mass along the normal vector and the rigidity of the AS are the two factors that determine roadway stability.Finally,a control measure for surrounding rock stability is proposed to reduce the internal driving force via a pressure relief method and improve the rigidity of the AS by full-length anchorage and grouting modification.展开更多
Earthquake-induced slope failures are common occurrences in engineering practice and pre-stressed anchor cables are an effective technique in maintaining slope stability,especially in areas that are prone to earthquak...Earthquake-induced slope failures are common occurrences in engineering practice and pre-stressed anchor cables are an effective technique in maintaining slope stability,especially in areas that are prone to earthquakes.Furthermore,the soil at typical engineering sites also exhibit unsaturated features.Explicit considerations of these factors in slope stability estimations are crucial in producing accurate results.In this study,the seismic responses of expansive soil slopes stabilized by anchor cables is studied in the realm of kinematic limit analysis.A modified horizontal slice method is proposed to semi-analytically formulate the energy balance equation.An illustrative slope is studied to demonstrate the influences of suction,seismic excitations and anchor cables on the slope stability.The results indicate that the stabilizing effect of soil suction relates strongly to the seismic excitation and presents a sine shape as the seismic wave propagates.In higher and steeper slopes,the stabilizing effect of suction is more evident.The critical slip surface tends to be much more shallow as the seismic wave approaches the peak and vice versa.展开更多
The deep mining of coal resources is accompanied by severe environmental challenges and various potential engineering hazards.The implementation of NPR(negative Poisson's ratio)bolts are capable of controlling lar...The deep mining of coal resources is accompanied by severe environmental challenges and various potential engineering hazards.The implementation of NPR(negative Poisson's ratio)bolts are capable of controlling large deformations in the surrounding rock effectively.This paper focuses on studying the mechanical properties of the NPR bolt under static disturbance load.The deep nonlinear mechanical experimental system was used to study the mechanical behavior of rock samples with different anchored types(unanchored/PR anchored/2G NPR anchored)under static disturbance load.The whole process of rock samples was taken by high-speed camera to obtain the real-time failure characteristics under static disturbance load.At the same time,the acoustic emission signal was collected to obtain the key characteristic parameters of acoustic emission such as acoustic emission count,energy,and frequency.The deformation at the failure of the samples was calculated and analyzed by digital speckle software.The findings indicate that the failure mode of rock is influenced by different types of anchoring.The peak failure strength of 2G NPR bolt anchored rock samples exhibits an increase of 6.5%when compared to the unanchored rock samples.The cumulative count and cumulative energy of acoustic emission exhibit a decrease of 62.16%and 62.90%,respectively.The maximum deformation of bearing capacity exhibits an increase of 59.27%,while the failure time demonstrates a delay of 42.86%.The peak failure strength of the 2G NPR bolt anchored ones under static disturbance load exhibits an increase of 5.94%when compared to the rock anchored by PR(Poisson's ratio)bolt.The cumulative count and cumulative energy of acoustic emission exhibit a decrease of 47.16%and 43.86%,respectively.The maximum deformation of the bearing capacity exhibits an increase of 50.43%,and the failure time demonstrates a delay of 32%.After anchoring by 2G NPR bolt,anchoring support effectively reduces the risk of damage caused by static disturbance load.These results demonstrate that the support effect of 2G NPR bolt materials surpasses that of PR bolt.展开更多
Only simplified two-dimensional model and a single failure mode are adopted to calculate the ultimate pullout capacity(UPC)of anchor cables in most previous research.This study focuses on a more comprehensive combinat...Only simplified two-dimensional model and a single failure mode are adopted to calculate the ultimate pullout capacity(UPC)of anchor cables in most previous research.This study focuses on a more comprehensive combination failure mode that consists of bond failure of an anchorage body and failure of an anchored rock mass.The three-dimensional ultimate pullout capacity of the anchor cables is calculated based on the Hoek-Brown failure criterion and variation analysis method.The numerical solution for the curvilinear function in fracture plane is obtained based on the finite difference theory,which more accurately reflects the failure state of the anchor cable,as opposed to that being assumed in advance.The results reveal that relying solely on a single failure mode for UPC calculations has limitations,as changes in parameter values not only directly impact the UPC value but also can alter the failure model and thus the calculation method.展开更多
BACKGROUND With stiff competition from alternative albeit more expensive counterparts,it has become important to establish the applicability of metallic anchors for shoulder instability in the modern era.This can be a...BACKGROUND With stiff competition from alternative albeit more expensive counterparts,it has become important to establish the applicability of metallic anchors for shoulder instability in the modern era.This can be accomplished,in part,by analysing long-term outcomes.AIM To analyse minimum 10-year outcomes from 30 patients following arthroscopic anterior stabilisation using metallic anchors.METHODS Prospectively collected data from arthroscopic Bankart repairs performed using metal anchors during 2007P-2010 were retrospectively analysed in this singlesurgeon study.Comprehensive data collection included historical and clinical findings,dislocation details,operative specifics,and follow-up radiological and clinical findings including shoulder scores.The primary outcomes were patientreported scores(Constant,American Shoulder and Elbow Surgeons[ASES],and Rowe scores)and pain and instability on a visual analogue scale(VAS).RESULTS A 3% recurrence rate of dislocation was noted at the final follow-up.Total constant scores at 10 years postoperatively measured between 76 and 100(mean 89)were significantly better than preoperative scores(mean 62.7).Congruous improvements were also noted in the Rowe and ASES scores and VAS at the 10-year review.CONCLUSION Reliable long-term outcomes with metallic anchors in surgery for shoulder instability can be expected.Our results provide additional evidence of their continued,cost-effective presence in the modern scenario.展开更多
BACKGROUND Gastric cancer(GC)has high morbidity and mortality.Moreover,because GC has no typical symptoms in the early stages,most cases are already in the advanced stages by the time the symptoms appear,thus resultin...BACKGROUND Gastric cancer(GC)has high morbidity and mortality.Moreover,because GC has no typical symptoms in the early stages,most cases are already in the advanced stages by the time the symptoms appear,thus resulting in poor prognosis and a low survival rate.Endoscopic submucosal dissection(ESD)can realize the early detection and diagnosis of GC and become the main surgical method for early GC.However,ESD has a steep learning curve and high technical skill requirements for endoscopists,which is not conducive to its widespread implementation and advancement.Therefore,a series of auxiliary techniques have been derived.AIM To evaluate the safety and efficacy of magnetic anchor technique(MAT)-assisted ESD in early GC.METHODS This was an ex vivo animal experiment.The experimental models were the isolated stomachs of pigs,which were divided into two groups,namely the study group(n=6)with MAT-assisted ESD and the control group(n=6)with traditional ESD.Comparing the total surgical time,incidence of surgical complications,complete mucosal resection rate,specimen size,and the scores of endoscopist’s satisfaction with the procedure reflected their feelings about convenience during the surgical procedure between the two groups.The magnetic anchor device for auxiliary ESD in the study group comprised three parts,an anchor magnet(AM),a target magnet(TM),and a soft tissue clip.Under gastroscopic guidance,the soft tissue clip and the TM were delivered to the pre-marked mucosal lesion through the gastroscopic operating hole.The soft tissue clip and the TM were connected by a thin wire through the TM tail structure.The soft tissue clip was released by manipulating the operating handle of the soft tissue clip in a way that the soft tissue clip and the TM were fixed to the lesion mucosa.In vitro,ESD is aided by maneuvering the AM such that the mucosal dissection surface is exposed.RESULTS The total surgical time was shorter in the study group than in the control group(26.57±0.19 vs 29.97±0.28,P<0.001),and the scores of endoscopist’s satisfaction with the procedure were higher in the study group than in the control group(9.53±0.10 vs 8.00±0.22,P<0.001).During the operation in the study group,there was no detachment of the soft tissue clip and TM and no mucosal tearing.The magnetic force between the AM and TM provided good mucosal exposure and sufficient tissue tension for ESD.The mucosal lesion was completely peeled off,and the operation was successful.There were no significant differences in the incidence of surgical complications(100%vs 83.3%),complete mucosal resection rate(100%vs 66.7%,P=0.439),and specimen size(2.44±0.04 cm vs 2.49±0.02,P=0.328)between the two groups.CONCLUSION MAT-ESD is safe and effective for early GC.It provides a preliminary basis for subsequent internal animal experiments and clinical research.展开更多
To study the damage mechanism of multi‐anchor piles in tunnel crossing landslide area under earthquake,the damping performance of multi‐anchor piles was discussed.The energy dissipation springs were used as the opti...To study the damage mechanism of multi‐anchor piles in tunnel crossing landslide area under earthquake,the damping performance of multi‐anchor piles was discussed.The energy dissipation springs were used as the optimization device of the anchor head to carry out the shaking table comparison test on the reinforced slope.The Hilbert spectrum and Hilbert marginal spectrum were proposed to analyze the seismic damage mechanism of the multi‐anchor piles,and the peak Fourier spectrum amplitude(PFSA)was used to verify the effectiveness of the method.The results show that the seismic energy is concentrated in the high‐frequency component(30-40Hz)of the Hilbert spectrum and the low‐frequency component(12-30 Hz)of the marginal spectrum.This indicates that they can be combined with the distribution law of the PFSA to identify the overall and local dynamic responses of the multi‐anchored piles,respectively.The stretchable deformation of the energy‐dissipation springs improves the coordination of the multi‐anchor piles,resulting in better pile integrity.The damage mechanism of the multi‐anchor piles is elucidated based on the energy method:local damage at the top and middle areas of the multi‐anchor piles is mainly caused by the low‐frequency component(12-30 Hz)of the marginal spectrum under the action of 0.15g and 0.20g seismic intensities.As the seismic intensity increases to 0.30g,the dynamic response of the slope is further amplified by the high‐frequency component(30-40 Hz)of the Hilbert energy spectrum,which leads to the overall damage of the multi‐anchor piles.展开更多
The application of basalt fiber-reinforced polymer(BFRP)anchors has gained significant attention,particularly in the field of geotechnical anchorage engineering because of its high strength and corrosion resistance.Th...The application of basalt fiber-reinforced polymer(BFRP)anchors has gained significant attention,particularly in the field of geotechnical anchorage engineering because of its high strength and corrosion resistance.The research on the applicability of BFRP anchor in a tunnel–slope system under rainfall is of practical significance to solve the problem of instability damage to anchored slopes caused by corrosion of steel anchors.In this study,model tests of BFRP and steel anchorage structures were conducted to compare their reinforcement capability in a tunnel–slope system under heavy rainfall.The results show that the BFRP anchorage structure is better than the steel in coordinating slope deformation and stabilizing earth pressure around the tunnel.The deformation of slopes under rainfall is classified into four stages:initial,isokinetic,accelerated,and blocked deformations.BFRP anchors have the same axial strain distribution pattern as the steel anchors,and they are convexly distributed along the axial direction of the anchors.The correlation analysis and Pearson linear correlation analysis of the multi-attribute data of the slope and BFRP anchors showed a positive correlation among BFRP anchor strain,earth pressure inside the slope,slope deformation displacement,and accumulated rainfall.These research results provide a basis and reference for the application of BFRP anchors in the anchorage engineering of the tunnel–slope system under rainfall action.展开更多
A new anchor-siphon drainage combined method used for slope stabilization is proposed in this paper.It includes an anchoring section and a siphon drainage section.The novelty of the anchor-siphon drainage combined met...A new anchor-siphon drainage combined method used for slope stabilization is proposed in this paper.It includes an anchoring section and a siphon drainage section.The novelty of the anchor-siphon drainage combined method is the realization of the drainage and anchoring in the one inclined borehole.The engineering cost of drilling and the resulting disturbance to the slope is reduced.To validate the feasibility of the proposed method,a numerical method that combines the pore water pressure distribution after siphon drainage and the anchoring force of the anchoring section is used to evaluate the safety of the slope with the anchor-siphon drainage method.The proposed method was illustrated and validated with the Hongpu Village landslide,in Tonglu County,Zhejiang Province,in China.Compared with the common anchor bar with the same length in the anchoring section,the factor of safety(FOS)for Hongpu Village slope with anchorsiphon drainage is increased by 0.085.The calculation method of the optimal length ratio between the drainage section and the anchoring section and its influencing factors were studied.For the different design parameters,there is always an optimal length ratio of the drainage section.Compared with the siphon drainage and full-length anchor bar with the same borehole length,the anchor-siphon drainage combined method shows better landslide prevention ability.Moreover,when the optimized parameters with a bond strength of 560kPa,a borehole inclination of 35°,and no reduction in length are used,the calculated safety factor is 1.316,which is significantly higher than the FOS of 1.131 for the slope with siphon drainage.展开更多
Helical anchor is a kind of novel foundation for floating offshore wind turbines,which should be subjected to combined tensile loading caused by wind,wave and current.However,the research about the capacity of helical...Helical anchor is a kind of novel foundation for floating offshore wind turbines,which should be subjected to combined tensile loading caused by wind,wave and current.However,the research about the capacity of helical anchor was mainly examined under uniaxial loading and scarcely explored under combined loading.In this study,three-dimensional finite element limit analysis is adopted to assess the bearing capacities of single-plate rigid helical anchors with different ratios of helix to shaft diameter,D_(H)/D_(S) and embedment ratios L/D_(S).Result shows that the vertical,horizontal and moment bearing capacities increase with increasing D_(H)/D_(S) and L/D_(S).The normalized V-H failure envelopes expands with increasing L/D_(S),while the normalized V-M failure envelopes tend to contract with the increase of D_(H)/D_(S).With increasing D_(H)/D_(S) or decreasing L/D_(S),the normalized H-M failure envelopes expand when the horizontal and moment loading act in the same direction and contract when they act in the opposite direction.The effect of D_(H)/D_(S) and L/D_(S) on the shape of H-M failure envelope become insignificant when L/D_(S)≥4.A series of failure mechanisms under different loading conditions were observed and can be used to explain the trend.Besides,a series of approximate expressions were proposed to fit the uniaxial bearing capacities and the failure envelopes.展开更多
Supporting soft rock roadways in coal mines has long posed a formidable challenge. Addressing issues such as the formation of soft rock strata, poor fracture development, limited tolerance, and the frequent and severe...Supporting soft rock roadways in coal mines has long posed a formidable challenge. Addressing issues such as the formation of soft rock strata, poor fracture development, limited tolerance, and the frequent and severe damage sustained by conventional bolts due to their low elongation and bearing capacity, this study employs bottom expansion and filling technology. It combines theoretical analysis with booster bolt pull-out tests to scrutinize the radial stress distribution of bolts under extrusion forces. Moreover, it conducts a comparative analysis of bolt bearing characteristics under varying radial pressurization conditions, delving into the impact of radial directional increases in compressive stress on bolt anchoring performance.展开更多
The loss of anchoring force is one of the problems to be solved urgently.The anchorage loss is a key factor causing the failure of anchoring engineering,so it is crucial to study the time-dependent variation of anchor...The loss of anchoring force is one of the problems to be solved urgently.The anchorage loss is a key factor causing the failure of anchoring engineering,so it is crucial to study the time-dependent variation of anchoring force.Alternating dry and wet(D-W)conditions have a significant effect on deformation of rock.The anchoring system is composed of anchoring components and rock mass,and thus rock deformation has a significant impact on the loss of anchoring force.Quantifying rock deformation under the effects of D-W cycles is a prerequisite to understanding the factors that influence loss of anchoring force in anchor bolts.In this study,we designed an anchoring device that enabled real-time monitoring of the variation in strain during D-W periods and rock testing.Nuclear magnetic resonance(NMR)measurements showed that under D-W conditions,the increment in porosity was smaller for prestressed rock than unstressed rock.The trends of prestress loss and strain variation are consistent,which can be divided into three characteristic intervals:rapid attenuation stage,slow attenuation stage and relatively stable stage.At the same stress level,the rate of stress loss and strain for the soaking specimen was the highest,while that of the dried specimen was the lowest.In the same D-W cycling conditions,the greater the prestress,the smaller the strain loss rate of the rock,especially under soaking conditions.The characteristics of pore structure and physical mechanical parameters indicated that prestress could effectively suppress damage caused by erosion related to D-W cycles.The study reveals the fluctuation behavior of rock strain and prestress loss under D-W conditions,providing a reference for effectively controlling anchoring loss and ideas for inventing new anchoring components.展开更多
To investigate the stability of gravity anchors of suspension bridges,in-situ tests of the vertical bearing capacity of the bedrock,shear resistance of the anchor-rock interface,shear resistance of the bedrock were co...To investigate the stability of gravity anchors of suspension bridges,in-situ tests of the vertical bearing capacity of the bedrock,shear resistance of the anchor-rock interface,shear resistance of the bedrock were conducted in a suspension bridge project.Under dry-wet cycles,the deterioration law of the mechanical properties of argillaceous sandstone was identified in laboratory tests:the elastic modulus,cohesion and friction of the argillaceous sandstone deteriorated significantly at first few dry-wet cycles and then declined slowly after 10 cycles,ultimately these three mechanical parameters were reduced to about 1/3,1/3,2/3 of the initial value respectively.Moreover,numerical simulation was used to restore in-situ shear tests and a good agreement was obtained.Base on the results of in-situ and laboratory tests,the stability of the gravity anchor foundation under natural conditions and drywet cycles was calculated and its failure modes were analyzed.The results demonstrated that the dry-wet cycles caused uneven settlement of the anchor foundation,resulting in more serious stress concentration in the substrate.The dry-wet cycles remarkably reduced the stability coefficient of the anchor foundation,whose failure mode shifted from overturning failure under natural conditions to sliding failure.When there was weak interlayer in the rock layer,the anti-sliding stability of the anchor foundation was affected drastically.展开更多
This study compares the strength characteristics of rocks anchored by NPR bolts and ordinary bolts with varied preloads,based on the mechanical properties of NPR bolts(with a negative Poisson’s ratio).The results sho...This study compares the strength characteristics of rocks anchored by NPR bolts and ordinary bolts with varied preloads,based on the mechanical properties of NPR bolts(with a negative Poisson’s ratio).The results show that the uniaxial compressive stress-strain curve of ordinary anchored rocks exhibits noticeable abrupt changes.After reaching peak strength,the bolt breaks,whereas the stress-strain curve of NPR-anchored rocks is smoother.The NPR bolt enters the stage of continuous resistance after reaching maximal strength and does not break.As the preload increases,the strength of the anchored rock grows linearly.A calculation equation for the strength of the anchored rock is proposed based on the preload.The theoretical equation fits the test results well,and the fitted parameters show that NPR bolts can better increase the strength of the rock.The concept of dynamic toughness UC of anchored rock is proposed to reflect the comprehensive mechanical properties of anchored rock,including strength and plasticity.As the preload increases,the UC of ordinary anchored rock first decreases and then increases,while the UC of the NPR anchored rock does not change significantly with the preload when the strain is small,and the UC increases with the increase of the preload when the strain is large.展开更多
In order to develop a anchoring operation simulation system and improve safety during anchoring operations,a relatively accurate mathematical model of anchoring operations needs to be established.In this paper,the str...In order to develop a anchoring operation simulation system and improve safety during anchoring operations,a relatively accurate mathematical model of anchoring operations needs to be established.In this paper,the stress condition of anchor chain under environmental and subsea geological conditions is further studied and the stress condition of anchor chain is analyzed based on the previous research.In this paper,a quasi-static model based on catenary method is used as the basis of dynamic analysis,and the dynamic model of anchor chain is established based on the concentrated mass method,which fully considers the influence of anchor chain weight,hydrodynamic force,ocean current and interaction with the seabed.The fourth-order Runge Kutta method was used to solve the model numerically,and a calculation procedure was developed.The accuracy of the model was verified by comparing the calculated results with the experimental results,indicating that the constructed anchor chain dynamics model has a high accuracy.展开更多
基金financial support from the Second Tibetan Plateau Scientific Expedition and Research Program(STEP)(No.2019QZKK0708)the National Natural Science Foundation of China(No.41941018)the Special Fund of Yueqi Scholars(No.800015Z1207).
文摘The control of large deformation problems in layered soft rock tunnels needs to solve urgently.The roof problem is particularly severe among the deformation issues in tunnels.This study first analyzes the asymmetric deformation modes in layered soft rock tunnels with large deformations.Subsequently,we construct a mechanical model under ideal conditions for controlling the roof of layered soft rock tunnels through high preload with the support of NPR anchor cables.The prominent roles of long and short NPR anchor cables in the support system are also analyzed.The results indicate the significance of high preload in controlling the roof of layered soft rock tunnels.The short NPR anchor cables effectively improve the integrity of the stratified soft rock layers,while the long NPR anchor cables effectively mobilize the self-bearing capacity of deep-stable rock layers.Finally,the high-preload support method with NPR anchor cables is validated to have a good effect on controlling large deformations in layered soft rock tunnels through field monitoring data.
基金This paper is financially supported by the National Natural Science Foundation of China(Grant Nos.52074263 and 52034007)the Postgraduate Research and Practice Innovation Program of Jiangsu Province(Grant No.KYCX21_2332).
文摘Dynamic load on anchoring structures(AS)within deep roadways can result in cumulative damage and failure.This study develops an experimental device designed to test AS under triaxial loads.The device enables the investigation of the mechanical response,failure mode,instability assessment criteria,and anchorage effect of AS subjected to combined cyclic dynamic-static triaxial stress paths.The results show that the peak bearing strength is positively correlated with the anchoring matrix strength,anchorage length,and edgewise compressive strength.The bearing capacity decreases significantly when the anchorage direction is severely inclined.The free face failure modes are typically transverse cracking,concave fracturing,V-shaped slipping and detachment,and spallation detachment.Besides,when the anchoring matrix strength and the anchorage length decrease while the edgewise compressive strength,loading rate,and anchorage inclination angle increase,the failure intensity rises.Instability is determined by a negative tangent modulus of the displacement-strength curve or the continued deformation increase against the general downward trend.Under cyclic loads,the driving force that breaks the rock mass along the normal vector and the rigidity of the AS are the two factors that determine roadway stability.Finally,a control measure for surrounding rock stability is proposed to reduce the internal driving force via a pressure relief method and improve the rigidity of the AS by full-length anchorage and grouting modification.
基金National Natural Science Foundation of China under Grant Nos.52208345,52008124,52268054the Opening Fund of State Key Laboratory of Geohazard Prevention and Geoenvironment Protection under Grant No.SKLGP2022K002+1 种基金the Natural Science Foundation of Jiangsu Province under Grant No.BK20210479the Fundamental Research Funds for the Central Universities under Grant No.JUSRP121055。
文摘Earthquake-induced slope failures are common occurrences in engineering practice and pre-stressed anchor cables are an effective technique in maintaining slope stability,especially in areas that are prone to earthquakes.Furthermore,the soil at typical engineering sites also exhibit unsaturated features.Explicit considerations of these factors in slope stability estimations are crucial in producing accurate results.In this study,the seismic responses of expansive soil slopes stabilized by anchor cables is studied in the realm of kinematic limit analysis.A modified horizontal slice method is proposed to semi-analytically formulate the energy balance equation.An illustrative slope is studied to demonstrate the influences of suction,seismic excitations and anchor cables on the slope stability.The results indicate that the stabilizing effect of soil suction relates strongly to the seismic excitation and presents a sine shape as the seismic wave propagates.In higher and steeper slopes,the stabilizing effect of suction is more evident.The critical slip surface tends to be much more shallow as the seismic wave approaches the peak and vice versa.
基金provided by the National Natural Science Foundation of China(52074300)the Program of China Scholarship Council(202206430024)+2 种基金the National Natural Science Foundation of China Youth Science(52104139)Yueqi Young Scholars Project of China University of Mining and Technology Beijing(2602021RC84)Guizhou province science and technology planning project([2020]3007,[2020]3008)。
文摘The deep mining of coal resources is accompanied by severe environmental challenges and various potential engineering hazards.The implementation of NPR(negative Poisson's ratio)bolts are capable of controlling large deformations in the surrounding rock effectively.This paper focuses on studying the mechanical properties of the NPR bolt under static disturbance load.The deep nonlinear mechanical experimental system was used to study the mechanical behavior of rock samples with different anchored types(unanchored/PR anchored/2G NPR anchored)under static disturbance load.The whole process of rock samples was taken by high-speed camera to obtain the real-time failure characteristics under static disturbance load.At the same time,the acoustic emission signal was collected to obtain the key characteristic parameters of acoustic emission such as acoustic emission count,energy,and frequency.The deformation at the failure of the samples was calculated and analyzed by digital speckle software.The findings indicate that the failure mode of rock is influenced by different types of anchoring.The peak failure strength of 2G NPR bolt anchored rock samples exhibits an increase of 6.5%when compared to the unanchored rock samples.The cumulative count and cumulative energy of acoustic emission exhibit a decrease of 62.16%and 62.90%,respectively.The maximum deformation of bearing capacity exhibits an increase of 59.27%,while the failure time demonstrates a delay of 42.86%.The peak failure strength of the 2G NPR bolt anchored ones under static disturbance load exhibits an increase of 5.94%when compared to the rock anchored by PR(Poisson's ratio)bolt.The cumulative count and cumulative energy of acoustic emission exhibit a decrease of 47.16%and 43.86%,respectively.The maximum deformation of the bearing capacity exhibits an increase of 50.43%,and the failure time demonstrates a delay of 32%.After anchoring by 2G NPR bolt,anchoring support effectively reduces the risk of damage caused by static disturbance load.These results demonstrate that the support effect of 2G NPR bolt materials surpasses that of PR bolt.
基金supported by the Natural Science Foundation of Hunan Province(2023JJ40078)the Scientific Research Project of Hunan Provincial Education Department(No.22C0573)+2 种基金the National Natural Science Foundation of China(51478477,51878668)Guizhou Provincial Department of Transportation Foundation(2017-122058)Foundation of Guizhou Provincial Science and Technology Department([2018]2815).
文摘Only simplified two-dimensional model and a single failure mode are adopted to calculate the ultimate pullout capacity(UPC)of anchor cables in most previous research.This study focuses on a more comprehensive combination failure mode that consists of bond failure of an anchorage body and failure of an anchored rock mass.The three-dimensional ultimate pullout capacity of the anchor cables is calculated based on the Hoek-Brown failure criterion and variation analysis method.The numerical solution for the curvilinear function in fracture plane is obtained based on the finite difference theory,which more accurately reflects the failure state of the anchor cable,as opposed to that being assumed in advance.The results reveal that relying solely on a single failure mode for UPC calculations has limitations,as changes in parameter values not only directly impact the UPC value but also can alter the failure model and thus the calculation method.
文摘BACKGROUND With stiff competition from alternative albeit more expensive counterparts,it has become important to establish the applicability of metallic anchors for shoulder instability in the modern era.This can be accomplished,in part,by analysing long-term outcomes.AIM To analyse minimum 10-year outcomes from 30 patients following arthroscopic anterior stabilisation using metallic anchors.METHODS Prospectively collected data from arthroscopic Bankart repairs performed using metal anchors during 2007P-2010 were retrospectively analysed in this singlesurgeon study.Comprehensive data collection included historical and clinical findings,dislocation details,operative specifics,and follow-up radiological and clinical findings including shoulder scores.The primary outcomes were patientreported scores(Constant,American Shoulder and Elbow Surgeons[ASES],and Rowe scores)and pain and instability on a visual analogue scale(VAS).RESULTS A 3% recurrence rate of dislocation was noted at the final follow-up.Total constant scores at 10 years postoperatively measured between 76 and 100(mean 89)were significantly better than preoperative scores(mean 62.7).Congruous improvements were also noted in the Rowe and ASES scores and VAS at the 10-year review.CONCLUSION Reliable long-term outcomes with metallic anchors in surgery for shoulder instability can be expected.Our results provide additional evidence of their continued,cost-effective presence in the modern scenario.
基金Supported by the Key Research&Development Program-Social Development of Shaanxi Province of China,No.2021SF-163the Innovation Capability Support Plan of Shaanxi Province of China,No.2020KJXX-022.
文摘BACKGROUND Gastric cancer(GC)has high morbidity and mortality.Moreover,because GC has no typical symptoms in the early stages,most cases are already in the advanced stages by the time the symptoms appear,thus resulting in poor prognosis and a low survival rate.Endoscopic submucosal dissection(ESD)can realize the early detection and diagnosis of GC and become the main surgical method for early GC.However,ESD has a steep learning curve and high technical skill requirements for endoscopists,which is not conducive to its widespread implementation and advancement.Therefore,a series of auxiliary techniques have been derived.AIM To evaluate the safety and efficacy of magnetic anchor technique(MAT)-assisted ESD in early GC.METHODS This was an ex vivo animal experiment.The experimental models were the isolated stomachs of pigs,which were divided into two groups,namely the study group(n=6)with MAT-assisted ESD and the control group(n=6)with traditional ESD.Comparing the total surgical time,incidence of surgical complications,complete mucosal resection rate,specimen size,and the scores of endoscopist’s satisfaction with the procedure reflected their feelings about convenience during the surgical procedure between the two groups.The magnetic anchor device for auxiliary ESD in the study group comprised three parts,an anchor magnet(AM),a target magnet(TM),and a soft tissue clip.Under gastroscopic guidance,the soft tissue clip and the TM were delivered to the pre-marked mucosal lesion through the gastroscopic operating hole.The soft tissue clip and the TM were connected by a thin wire through the TM tail structure.The soft tissue clip was released by manipulating the operating handle of the soft tissue clip in a way that the soft tissue clip and the TM were fixed to the lesion mucosa.In vitro,ESD is aided by maneuvering the AM such that the mucosal dissection surface is exposed.RESULTS The total surgical time was shorter in the study group than in the control group(26.57±0.19 vs 29.97±0.28,P<0.001),and the scores of endoscopist’s satisfaction with the procedure were higher in the study group than in the control group(9.53±0.10 vs 8.00±0.22,P<0.001).During the operation in the study group,there was no detachment of the soft tissue clip and TM and no mucosal tearing.The magnetic force between the AM and TM provided good mucosal exposure and sufficient tissue tension for ESD.The mucosal lesion was completely peeled off,and the operation was successful.There were no significant differences in the incidence of surgical complications(100%vs 83.3%),complete mucosal resection rate(100%vs 66.7%,P=0.439),and specimen size(2.44±0.04 cm vs 2.49±0.02,P=0.328)between the two groups.CONCLUSION MAT-ESD is safe and effective for early GC.It provides a preliminary basis for subsequent internal animal experiments and clinical research.
基金Science and technology development project of China Railway Ninth Bureau Group Co.,Ltd,Grant/Award Number:DLF‐ML‐JSFW‐2021‐09Science and Technology Development Project of China Railway Research Institute Co.Ltd,Grant/Award Number:2017‐KJ008‐Z008‐XB+2 种基金Gansu Province Youth Science and Technology Fund program,China,Grant/Award Number:21JR7RA739Natural Science Foundation of Gansu Province,China,Grant/Award Number:21JR7RA738National Key R&D Program of China,Grant/Award Number:2018YFC1504901。
文摘To study the damage mechanism of multi‐anchor piles in tunnel crossing landslide area under earthquake,the damping performance of multi‐anchor piles was discussed.The energy dissipation springs were used as the optimization device of the anchor head to carry out the shaking table comparison test on the reinforced slope.The Hilbert spectrum and Hilbert marginal spectrum were proposed to analyze the seismic damage mechanism of the multi‐anchor piles,and the peak Fourier spectrum amplitude(PFSA)was used to verify the effectiveness of the method.The results show that the seismic energy is concentrated in the high‐frequency component(30-40Hz)of the Hilbert spectrum and the low‐frequency component(12-30 Hz)of the marginal spectrum.This indicates that they can be combined with the distribution law of the PFSA to identify the overall and local dynamic responses of the multi‐anchored piles,respectively.The stretchable deformation of the energy‐dissipation springs improves the coordination of the multi‐anchor piles,resulting in better pile integrity.The damage mechanism of the multi‐anchor piles is elucidated based on the energy method:local damage at the top and middle areas of the multi‐anchor piles is mainly caused by the low‐frequency component(12-30 Hz)of the marginal spectrum under the action of 0.15g and 0.20g seismic intensities.As the seismic intensity increases to 0.30g,the dynamic response of the slope is further amplified by the high‐frequency component(30-40 Hz)of the Hilbert energy spectrum,which leads to the overall damage of the multi‐anchor piles.
基金supported by the National Key R&D Program of China(Grant No.2018YFC1504901)Science and Technology Fund Program of Gansu Province for Young People(22JR5RA778)+3 种基金Science and Technology Development Project of China Railway 11th Bureau Group Corporation Limited(Grant No.2021-06)Gansu Province Youth Science and Technology Fund program,China(Grant No.21JR7RA739)Natural Science Foundation of Gansu Province,China(Grant No.21JR7RA738)Science and Technology Development Project of China Railway Research Institute Co.Ltd(2017-KJ008-Z008-XB).
文摘The application of basalt fiber-reinforced polymer(BFRP)anchors has gained significant attention,particularly in the field of geotechnical anchorage engineering because of its high strength and corrosion resistance.The research on the applicability of BFRP anchor in a tunnel–slope system under rainfall is of practical significance to solve the problem of instability damage to anchored slopes caused by corrosion of steel anchors.In this study,model tests of BFRP and steel anchorage structures were conducted to compare their reinforcement capability in a tunnel–slope system under heavy rainfall.The results show that the BFRP anchorage structure is better than the steel in coordinating slope deformation and stabilizing earth pressure around the tunnel.The deformation of slopes under rainfall is classified into four stages:initial,isokinetic,accelerated,and blocked deformations.BFRP anchors have the same axial strain distribution pattern as the steel anchors,and they are convexly distributed along the axial direction of the anchors.The correlation analysis and Pearson linear correlation analysis of the multi-attribute data of the slope and BFRP anchors showed a positive correlation among BFRP anchor strain,earth pressure inside the slope,slope deformation displacement,and accumulated rainfall.These research results provide a basis and reference for the application of BFRP anchors in the anchorage engineering of the tunnel–slope system under rainfall action.
基金the financial support of the National Natural Science Foundation of China(Key Project)(No.42230702)National Natural Science Foundation of China(No.42277129)Natural Science Foundation of Zhejiang Province(No.LY21D020001)。
文摘A new anchor-siphon drainage combined method used for slope stabilization is proposed in this paper.It includes an anchoring section and a siphon drainage section.The novelty of the anchor-siphon drainage combined method is the realization of the drainage and anchoring in the one inclined borehole.The engineering cost of drilling and the resulting disturbance to the slope is reduced.To validate the feasibility of the proposed method,a numerical method that combines the pore water pressure distribution after siphon drainage and the anchoring force of the anchoring section is used to evaluate the safety of the slope with the anchor-siphon drainage method.The proposed method was illustrated and validated with the Hongpu Village landslide,in Tonglu County,Zhejiang Province,in China.Compared with the common anchor bar with the same length in the anchoring section,the factor of safety(FOS)for Hongpu Village slope with anchorsiphon drainage is increased by 0.085.The calculation method of the optimal length ratio between the drainage section and the anchoring section and its influencing factors were studied.For the different design parameters,there is always an optimal length ratio of the drainage section.Compared with the siphon drainage and full-length anchor bar with the same borehole length,the anchor-siphon drainage combined method shows better landslide prevention ability.Moreover,when the optimized parameters with a bond strength of 560kPa,a borehole inclination of 35°,and no reduction in length are used,the calculated safety factor is 1.316,which is significantly higher than the FOS of 1.131 for the slope with siphon drainage.
基金financially supported by the National Natural Science Foundation of China (Grant Nos.51890913 and 51879183)the China Harbour Engineering Company (Grant No.2018-ZJKJ-01)+2 种基金the China Scholarship Councilthe State Key Laboratory of Hydraulic Engineering Simulation and Safety,Tianjin University (Grant No.HESS-2019)the State Key Laboratory of Coastal and Offshore Engineering,Dalian University of Technology (Grant No.LP2120)。
文摘Helical anchor is a kind of novel foundation for floating offshore wind turbines,which should be subjected to combined tensile loading caused by wind,wave and current.However,the research about the capacity of helical anchor was mainly examined under uniaxial loading and scarcely explored under combined loading.In this study,three-dimensional finite element limit analysis is adopted to assess the bearing capacities of single-plate rigid helical anchors with different ratios of helix to shaft diameter,D_(H)/D_(S) and embedment ratios L/D_(S).Result shows that the vertical,horizontal and moment bearing capacities increase with increasing D_(H)/D_(S) and L/D_(S).The normalized V-H failure envelopes expands with increasing L/D_(S),while the normalized V-M failure envelopes tend to contract with the increase of D_(H)/D_(S).With increasing D_(H)/D_(S) or decreasing L/D_(S),the normalized H-M failure envelopes expand when the horizontal and moment loading act in the same direction and contract when they act in the opposite direction.The effect of D_(H)/D_(S) and L/D_(S) on the shape of H-M failure envelope become insignificant when L/D_(S)≥4.A series of failure mechanisms under different loading conditions were observed and can be used to explain the trend.Besides,a series of approximate expressions were proposed to fit the uniaxial bearing capacities and the failure envelopes.
文摘Supporting soft rock roadways in coal mines has long posed a formidable challenge. Addressing issues such as the formation of soft rock strata, poor fracture development, limited tolerance, and the frequent and severe damage sustained by conventional bolts due to their low elongation and bearing capacity, this study employs bottom expansion and filling technology. It combines theoretical analysis with booster bolt pull-out tests to scrutinize the radial stress distribution of bolts under extrusion forces. Moreover, it conducts a comparative analysis of bolt bearing characteristics under varying radial pressurization conditions, delving into the impact of radial directional increases in compressive stress on bolt anchoring performance.
基金This work was supported by National Natural Science Foundation of China(Nos.52164001,52064006 and 52004072)the Science and Technology Support Project of Guizhou(Nos.[2020]4Y044),[2021]N404 and[2021]N511)+2 种基金the Cultivation Program of Guizhou University([2020]No.1)the Talents of Guizhou University(No.201901)the Special Research Funds of Guizhou University(Nos.201903,202011 and 202012).
文摘The loss of anchoring force is one of the problems to be solved urgently.The anchorage loss is a key factor causing the failure of anchoring engineering,so it is crucial to study the time-dependent variation of anchoring force.Alternating dry and wet(D-W)conditions have a significant effect on deformation of rock.The anchoring system is composed of anchoring components and rock mass,and thus rock deformation has a significant impact on the loss of anchoring force.Quantifying rock deformation under the effects of D-W cycles is a prerequisite to understanding the factors that influence loss of anchoring force in anchor bolts.In this study,we designed an anchoring device that enabled real-time monitoring of the variation in strain during D-W periods and rock testing.Nuclear magnetic resonance(NMR)measurements showed that under D-W conditions,the increment in porosity was smaller for prestressed rock than unstressed rock.The trends of prestress loss and strain variation are consistent,which can be divided into three characteristic intervals:rapid attenuation stage,slow attenuation stage and relatively stable stage.At the same stress level,the rate of stress loss and strain for the soaking specimen was the highest,while that of the dried specimen was the lowest.In the same D-W cycling conditions,the greater the prestress,the smaller the strain loss rate of the rock,especially under soaking conditions.The characteristics of pore structure and physical mechanical parameters indicated that prestress could effectively suppress damage caused by erosion related to D-W cycles.The study reveals the fluctuation behavior of rock strain and prestress loss under D-W conditions,providing a reference for effectively controlling anchoring loss and ideas for inventing new anchoring components.
基金supported by the National Science Foundation of China(Grant No.52278469)the Natural Science Foundation of Hunan Province(Grant No.2022JJ30715)。
文摘To investigate the stability of gravity anchors of suspension bridges,in-situ tests of the vertical bearing capacity of the bedrock,shear resistance of the anchor-rock interface,shear resistance of the bedrock were conducted in a suspension bridge project.Under dry-wet cycles,the deterioration law of the mechanical properties of argillaceous sandstone was identified in laboratory tests:the elastic modulus,cohesion and friction of the argillaceous sandstone deteriorated significantly at first few dry-wet cycles and then declined slowly after 10 cycles,ultimately these three mechanical parameters were reduced to about 1/3,1/3,2/3 of the initial value respectively.Moreover,numerical simulation was used to restore in-situ shear tests and a good agreement was obtained.Base on the results of in-situ and laboratory tests,the stability of the gravity anchor foundation under natural conditions and drywet cycles was calculated and its failure modes were analyzed.The results demonstrated that the dry-wet cycles caused uneven settlement of the anchor foundation,resulting in more serious stress concentration in the substrate.The dry-wet cycles remarkably reduced the stability coefficient of the anchor foundation,whose failure mode shifted from overturning failure under natural conditions to sliding failure.When there was weak interlayer in the rock layer,the anti-sliding stability of the anchor foundation was affected drastically.
基金supported by the National Natural Science Foundation of China(Grant Nos.52174096 and 51874311)。
文摘This study compares the strength characteristics of rocks anchored by NPR bolts and ordinary bolts with varied preloads,based on the mechanical properties of NPR bolts(with a negative Poisson’s ratio).The results show that the uniaxial compressive stress-strain curve of ordinary anchored rocks exhibits noticeable abrupt changes.After reaching peak strength,the bolt breaks,whereas the stress-strain curve of NPR-anchored rocks is smoother.The NPR bolt enters the stage of continuous resistance after reaching maximal strength and does not break.As the preload increases,the strength of the anchored rock grows linearly.A calculation equation for the strength of the anchored rock is proposed based on the preload.The theoretical equation fits the test results well,and the fitted parameters show that NPR bolts can better increase the strength of the rock.The concept of dynamic toughness UC of anchored rock is proposed to reflect the comprehensive mechanical properties of anchored rock,including strength and plasticity.As the preload increases,the UC of ordinary anchored rock first decreases and then increases,while the UC of the NPR anchored rock does not change significantly with the preload when the strain is small,and the UC increases with the increase of the preload when the strain is large.
基金supported by the National Natural Science Foundation of China(Grant No.52071200)the Science and Technology Commission of Shanghai Munici-pality.(Grant No.23010501900)。
文摘In order to develop a anchoring operation simulation system and improve safety during anchoring operations,a relatively accurate mathematical model of anchoring operations needs to be established.In this paper,the stress condition of anchor chain under environmental and subsea geological conditions is further studied and the stress condition of anchor chain is analyzed based on the previous research.In this paper,a quasi-static model based on catenary method is used as the basis of dynamic analysis,and the dynamic model of anchor chain is established based on the concentrated mass method,which fully considers the influence of anchor chain weight,hydrodynamic force,ocean current and interaction with the seabed.The fourth-order Runge Kutta method was used to solve the model numerically,and a calculation procedure was developed.The accuracy of the model was verified by comparing the calculated results with the experimental results,indicating that the constructed anchor chain dynamics model has a high accuracy.