Mg alloys have mechanical properties compatible with human bones.However,their rapid degradation and associated foreign body reactions in vivo significantly limit their application for human implants.In this study,thr...Mg alloys have mechanical properties compatible with human bones.However,their rapid degradation and associated foreign body reactions in vivo significantly limit their application for human implants.In this study,three differently processed Mg alloys,pure Mg(PM),cold extruded Mg alloy AZ31(CE AZ31),and fully annealed AZ31 Mg alloy(FA AZ31)were comparatively investigated for their potential as implants using a rat model.All three implanted Mg alloys do not show any impact on hepato-and renal function,nor any signs of observable changes to vital organs.Proteomics analysis of tissues directly contacting the implants 2.5 months post implantation revealed that FA AZ31 activates very few inflammation and immune associated signaling pathways;while the CE AZ31 and PM produce more significant inflammatory responses as confirmed by cytokine array analyses.Further,FA AZ31 activated pathways for cell organization and development that may improve the recovery of injured tissues.Structurally,EBSD analysis reveals that the FA AZ31 alloy has a higher ratio of first-order pyramidal orientated(10–11){10–1–2}grain texture with a value of 0.25,while PM and CE AZ31 alloys have lower ratios of first-order pyramidal orientated texture with the values of 0.16 and 0.17,respectively.This is associated with recovery and recrystallisation during annealing which promotes grain texture which exhibits enhanced degradation behaviours and induces a more limited immune response in vivo.In conclusion,the FA AZ31 demonstrated better biocompatibility and corrosion resistance and is a promising candidate for metal-based degradable implants which warrants further investigation.展开更多
The combustion characteristics of two kinds of unburned pulverized coal (UPC) made from bituminous coal and anthracite were investigated by thermogravimetric analysis under air. The reaction kinetics mechanisms betwee...The combustion characteristics of two kinds of unburned pulverized coal (UPC) made from bituminous coal and anthracite were investigated by thermogravimetric analysis under air. The reaction kinetics mechanisms between UPC and CO2 in an isothermal experiment in the temperature range 1000–1100°C were investigated. The combustion performance of unburned pulverized coal made from bituminous coal (BUPC) was better than that of unburned pulverized coal made from anthracite (AUPC). The combustion characteristic indexes (S) of BUPC and AUPC are 0.47 × 10^-6 and 0.34 × 10^-6 %2·min^-2·°C^-3, respectively, and the combustion reaction apparent activation energies are 91.94 and 102.63 kJ·mol^-1, respectively. The reaction mechanism of BUPC with CO2 is random nucleation and growth, and the apparent activation energy is 96.24 kJ·mol^-1. By contrast, the reaction mechanism of AUPC with CO2 follows the shrinkage spherical function model and the apparent activation energy is 133.55 kJ·mol^-1.展开更多
The quantum yield is an important factor to evaluate the efficiency of photoreactor. This article gives an overall calculation method of the quantum efficiency( Φ ) and the apparent quantum efficiency( Φ a) to the T...The quantum yield is an important factor to evaluate the efficiency of photoreactor. This article gives an overall calculation method of the quantum efficiency( Φ ) and the apparent quantum efficiency( Φ a) to the TiO 2/UV photocatalysis system. Furthermore, for the immobility system (IS), the formulation of the faction of light absorbed by the TiO 2 thin film is proposed so as to calculate the quantum efficiency by using the measured value and theoretic calculated value of transmissivity (T). For the suspension system(SS), due to the difficulty to obtain the absorption coefficient ( α ) of TiO 2 particulates, the quantum efficiency is calculated by means of the relative photonic efficiency ( ζ r) and the standard quantum yield ( Φ standard ).展开更多
The demanganization reaction kinetics of carbon-saturated liquid iron with an eight-component slag consisting of CaO–SiO_2–MgO–FeO–MnO–Al_2O_3–TiO_2–CaF_2 was investigated at 1553, 1623, and 1673 K in this stud...The demanganization reaction kinetics of carbon-saturated liquid iron with an eight-component slag consisting of CaO–SiO_2–MgO–FeO–MnO–Al_2O_3–TiO_2–CaF_2 was investigated at 1553, 1623, and 1673 K in this study. The rate-controlling step(RCS) for the demanganization reaction with regard to the hot metal pretreatment conditions was studied via kinetics analysis based on the fundamental equation of heterogeneous reaction kinetics. From the temperature dependence of the mass transfer coefficient of a transition-metal oxide(Mn O), the apparent activation energy of the demanganization reaction was estimated to be 189.46 k J·mol^(–1) in the current study, which indicated that the mass transfer of Mn O in the molten slag controlled the overall rate of the demanganization reaction. The calculated apparent activation energy was slightly lower than the values reported in the literature for mass transfer in a slag phase. This difference was attributed to an increase in the "specific reaction interface"(SRI) value, either as a result of turbulence at the reaction interface or a decrease of the absolute amount of slag phase during sampling, and to the addition of calcium fluoride to the slag.展开更多
This investigation was carried out to establish a new domestic landfill gas(LFG)generation rate model that takes into account the impact of leachate recirculation.The first-order kinetics and two-stage reaction(FKTSR)...This investigation was carried out to establish a new domestic landfill gas(LFG)generation rate model that takes into account the impact of leachate recirculation.The first-order kinetics and two-stage reaction(FKTSR)model of the LFG generation rate includes mechanisms of the nutrient balance for biochemical reaction in two main stages.In this study,the FKTSR model was modified by the introduction of the outflow function and the organic acid conversion coefficient in order to represent the in-situ condition of nutrient loss through leachate.Laboratory experiments were carried out to simulate the impact of leachate recirculation and verify the modified FKTSR model.The model calibration was then calculated by using the experimental data.The results suggested that the new model was in line with the experimental data.The main parameters of the modified FKTSR model,including the LFG production potential(L0),the reaction rate constant in the first stage(K1),and the reaction rate constant in the second stage(K2)of 64.746 L,0.202 d^(–1),and 0.338 d^(–1),respectively,were comparable to the old ones of 42.069 L,0.231 d^(–1),and 0.231 d^(–1).The new model is better able to explain the mechanisms involved in LFG generation.展开更多
基金supported in part by JSPS research grant(No.P16718)Natural Science Foundation of Guangdong Province(No.2020A1515010855)+2 种基金National Science Foundation of China(31971355)Genecology MCR Seed Funding of University of the Sunshine CoastDeng Feng Project of Foshan First People’s Hospital(2019A008)。
文摘Mg alloys have mechanical properties compatible with human bones.However,their rapid degradation and associated foreign body reactions in vivo significantly limit their application for human implants.In this study,three differently processed Mg alloys,pure Mg(PM),cold extruded Mg alloy AZ31(CE AZ31),and fully annealed AZ31 Mg alloy(FA AZ31)were comparatively investigated for their potential as implants using a rat model.All three implanted Mg alloys do not show any impact on hepato-and renal function,nor any signs of observable changes to vital organs.Proteomics analysis of tissues directly contacting the implants 2.5 months post implantation revealed that FA AZ31 activates very few inflammation and immune associated signaling pathways;while the CE AZ31 and PM produce more significant inflammatory responses as confirmed by cytokine array analyses.Further,FA AZ31 activated pathways for cell organization and development that may improve the recovery of injured tissues.Structurally,EBSD analysis reveals that the FA AZ31 alloy has a higher ratio of first-order pyramidal orientated(10–11){10–1–2}grain texture with a value of 0.25,while PM and CE AZ31 alloys have lower ratios of first-order pyramidal orientated texture with the values of 0.16 and 0.17,respectively.This is associated with recovery and recrystallisation during annealing which promotes grain texture which exhibits enhanced degradation behaviours and induces a more limited immune response in vivo.In conclusion,the FA AZ31 demonstrated better biocompatibility and corrosion resistance and is a promising candidate for metal-based degradable implants which warrants further investigation.
基金financially supported by the National Natural Science Foundation of China (Nos. 51874080, 51604069, and 51774071)the Fundamental Research Funds for the Central Universities, China (No. N162504004)
文摘The combustion characteristics of two kinds of unburned pulverized coal (UPC) made from bituminous coal and anthracite were investigated by thermogravimetric analysis under air. The reaction kinetics mechanisms between UPC and CO2 in an isothermal experiment in the temperature range 1000–1100°C were investigated. The combustion performance of unburned pulverized coal made from bituminous coal (BUPC) was better than that of unburned pulverized coal made from anthracite (AUPC). The combustion characteristic indexes (S) of BUPC and AUPC are 0.47 × 10^-6 and 0.34 × 10^-6 %2·min^-2·°C^-3, respectively, and the combustion reaction apparent activation energies are 91.94 and 102.63 kJ·mol^-1, respectively. The reaction mechanism of BUPC with CO2 is random nucleation and growth, and the apparent activation energy is 96.24 kJ·mol^-1. By contrast, the reaction mechanism of AUPC with CO2 follows the shrinkage spherical function model and the apparent activation energy is 133.55 kJ·mol^-1.
文摘The quantum yield is an important factor to evaluate the efficiency of photoreactor. This article gives an overall calculation method of the quantum efficiency( Φ ) and the apparent quantum efficiency( Φ a) to the TiO 2/UV photocatalysis system. Furthermore, for the immobility system (IS), the formulation of the faction of light absorbed by the TiO 2 thin film is proposed so as to calculate the quantum efficiency by using the measured value and theoretic calculated value of transmissivity (T). For the suspension system(SS), due to the difficulty to obtain the absorption coefficient ( α ) of TiO 2 particulates, the quantum efficiency is calculated by means of the relative photonic efficiency ( ζ r) and the standard quantum yield ( Φ standard ).
基金support from the National Natural Science Foundation of China (Nos. U1560203 and 51274031)the Beijing Key Laboratory of Special Melting and Preparation of High-End Metal Materials in the School of Metallurgical and Ecological Engineering of University of Science and Technology Beijing, China
文摘The demanganization reaction kinetics of carbon-saturated liquid iron with an eight-component slag consisting of CaO–SiO_2–MgO–FeO–MnO–Al_2O_3–TiO_2–CaF_2 was investigated at 1553, 1623, and 1673 K in this study. The rate-controlling step(RCS) for the demanganization reaction with regard to the hot metal pretreatment conditions was studied via kinetics analysis based on the fundamental equation of heterogeneous reaction kinetics. From the temperature dependence of the mass transfer coefficient of a transition-metal oxide(Mn O), the apparent activation energy of the demanganization reaction was estimated to be 189.46 k J·mol^(–1) in the current study, which indicated that the mass transfer of Mn O in the molten slag controlled the overall rate of the demanganization reaction. The calculated apparent activation energy was slightly lower than the values reported in the literature for mass transfer in a slag phase. This difference was attributed to an increase in the "specific reaction interface"(SRI) value, either as a result of turbulence at the reaction interface or a decrease of the absolute amount of slag phase during sampling, and to the addition of calcium fluoride to the slag.
基金the Specialized Research Fund for the Doctoral Program of Higher Education(No.20050027002)。
文摘This investigation was carried out to establish a new domestic landfill gas(LFG)generation rate model that takes into account the impact of leachate recirculation.The first-order kinetics and two-stage reaction(FKTSR)model of the LFG generation rate includes mechanisms of the nutrient balance for biochemical reaction in two main stages.In this study,the FKTSR model was modified by the introduction of the outflow function and the organic acid conversion coefficient in order to represent the in-situ condition of nutrient loss through leachate.Laboratory experiments were carried out to simulate the impact of leachate recirculation and verify the modified FKTSR model.The model calibration was then calculated by using the experimental data.The results suggested that the new model was in line with the experimental data.The main parameters of the modified FKTSR model,including the LFG production potential(L0),the reaction rate constant in the first stage(K1),and the reaction rate constant in the second stage(K2)of 64.746 L,0.202 d^(–1),and 0.338 d^(–1),respectively,were comparable to the old ones of 42.069 L,0.231 d^(–1),and 0.231 d^(–1).The new model is better able to explain the mechanisms involved in LFG generation.
