The Effects of Negative Values of Apparent Resistivity in TEM Surveys

The calculation of apparent resistivity in electrical methods is relatively simple and consolidated in the literature. Furthermore, in the case of DC methods, the apparent resistivity values are for the most part, intuitive and enable an initial interpretation of the results. On the other hand, in TEM method the apparent resistivity values are not very intuitive and interpretation based only on the apparent resistivity values cannot be done reasonably. In this way, this paper presents a discussion about the reasons and effects of the negatives values of apparent resistivity in TEM soundings. The main objective of this paper is to clarify the meanings of these negatives values and the possible effects in TEM inversion.

A new approach for calculating the apparent resistivity tensor

The apparent resistivity tensor pB is an electromagnetic transfer function,which can be used to analyze and explain the underground electrical structure.Conventional method for obtaining the parameter requires controlled sources and can be easy to be disturbed by cultural noises.We present a new method for calculating the apparent resistivity tensor,the current density is first obtained by measuring the curl operator of the magnetic field on the Earth's surface.This approach is independent of the assumption of a plane wave,and may be used irrespective of source types and field areas.We derived the analytical expressions of the apparent resistivity tensor based on synthetic horizontally layered models with a vertical magnetic dipole source.We then calculate the responses of Pb through numerical modeling examples using both natural sources and controlled sources.Compared to traditional apparent resistivity definitions,our apparent resistivity tensor has the same amplitude value but with more sensitive phases in the far zone,and shows few distortions in the transition zone.And in the near-field zone,it is closer to the resistivity distribution under the ground.The simulation results have demonstrated the effectiveness of the proposed method for calculating the apparent resistivity tensor.

Electric potential and apparent resistivity in rocks containing non-uniformly distributed cracks

In this paper, the formula of electric field distribution and ground apparent resistivity of high resistance rock medium containing low resistance crack are deduced and simulated. The result shows that interstitial parameters, such as buried depth, scale, strike, and real resistivity, etc, have influence on observation and computing result of apparent resistivity. This study provided a useful foundation for earthquake prediction using apparent resistivity method.

Apparent resistivity of azimuthal anisotropy layered media

The electric field, equations of boundary conditions and calculation formula of apparent resistivity are derived for the azimuthal anisotropy layered media with the DC method based on the anisotropic Ohm's law. Taking the Schlumberger symmetric system as an example and using the recurrence formula of nuclear function, the paper theoretically simulates a model of four layers with the same anisotropy coefficient for each layer. The deep sounding curves of resistivity and the pattern of contours are obtained for the model. The results show that the theoretical formula is correct, and the deep sounding curves not only exhibit the difference of resistivity among layers but also indicate the anisotropy characteristics of layers.

Pharmacoepidemiologic study of association between apparent treatment resistant hypertension, cardiovascular disease and interaction effect by sex and age

BACKGROUND A limited number of studies have been conducted to test the magnitudes of the association between apparent treatment resistant hypertension(aTRH)and risk of cardiovascular disease(CVD).AIM To investigate the association between aTRH and risk of CVD and examine whether sex and age modify this association.METHODS We applied an observational analysis study design using data from the United States Antihypertensive and Lipid-Lowering Treatment to Prevent Heart Attack Trial(ALLHAT).ALLHAT recruited participants(n=25516)from 625 primary care settings throughout the United States,Canada,Puerto Rico,and United States Virgin Islands,aged 55 and older with hypertension and at least one additional risk factor for heart disease.aTRH was assessed from the year 2 visit.CVD event was defined as one of the following from the year 2 follow-up visit:Fatal or non-fatal myocardial infarction,coronary revascularization,angina,stroke,heart failure,or peripheral artery disease.Cox proportional hazards regression was used to examine the effect of aTRH on CVD risk.Potential modifications of sex and age on this association were examined on the multiplicative scale by interaction term and additive scale by joint effects and relative excess risk for interaction.RESULTS Of the total study participants(n=25516),5030 experienced a CVD event during a mean of 4.7 years follow-up.aTRH was associated with a 30%increase in risk of CVD compared to non-aTRH[hazards ratio(HR)=1.3,95%CI:1.19-1.42].Sex and age modified this relationship on both multiplicative and additive scales independently.Stratified by sex,aTRH was associated with a 64%increase in risk of CVD(HR=1.64,95%CI:1.43–1.88)in women,and a 13%increase in risk of CVD(HR=1.13,95%CI:1.01–1.27)in men.Stratified by age,aTRH had a stronger impact on the risk of CVD in participants aged<65(HR=1.53,95%CI:1.32–1.77)than it did in those aged≥65(HR=1.18,95%CI:1.05–1.32).Significant two-way interactions of sex and aTRH,and age and aTRH on risk of CVD were observed(P<0.05).The observed joint effect of aTRH and ages≥65 years(HR=1.85,95%CI:1.22–2.48)in males was less than what was expected for both additive and multiplicative models(HR=4.10,95%CI:3.63–4.57 and 4.88,95%CI:3.66–6.31),although three-way interaction of sex,age,and aTRH on the risk of CVD and coronary heart disease did not reach a statistical significance(P>0.05).CONCLUSION aTRH was significantly associated with an increased risk of CVD and this association was modified by both sex and age.Further studies are warranted to test these mechanisms.

Resistivity is used as a tool to evaluate the variability of soil water content

Resistivity is used to evaluate soil water content(SWC),which has the advantages of not causing soil disturbance and in low price.It is an effective way to assess the SWC variability.This paper aims to evaluate the variability of loess slope SWC through the change of resistivity.It provides a simple way for long term SWC monitoring to solve the expensive cost of deploying moisture sensors.In this context,geoelectric and environmental factors such as soil temperature and SWC were monitored for three years.The prediction model of apparent resistivity and SWC was calibrated.The post processing of geoelectric data was introduced.In addition,the SWC collected by Time-Domain Reflectometry(TDR)was used to verify the feasibility of electrical resistivity tomography(ERT)data.The SWC variability in the process of rainfall,the evolution of four seasons,and the alternation of drying and wetting were evaluated.The research results show that:i)the SWC monitored by ERT and TDR can reflect the response and hysteretic effect of water content at 0.5-3.0 m depth.ii)The moisture content monitored by ERT reflects that the soil is relatively wet in summer and autumn and dry in winter and spring.iii)From 2017 to 2020,the SWC increased in August,and the soil became dry in January.iv)Two areas with high SWC and three areas with low SWC on loess slope are reflected by resistivity.The outcome can provide the change information of SWC to a great extent without excavating boreholes.

Electrical Resistivity Sounding for Groundwater Investigation around Enugu Metropolis and the Environs, Southeast Nigeria

This report evaluates the use of electrical method and borehole data to investigate the subsurface to delineate the groundwater potential in Enugu metropolis and the environs, south-eastern Nigeria other than rely only on resistivity method which could lead to interpretation error. Integrating these 2 data sets is key in this study. The study area is located in the Anambra Basin and is underlain by Nkporo/Enugu Shale which is overlain by the Mamu Formation. It is bounded by Latitudes 6°2 0'00"N to 6°30'00"N and Longitudes 7°25'00"E to 7°35'00"E and covers surface area of about 342 m2. Thirty-one vertical electrical soundings (VES) were carried out across the area using the Schlumberger electrode array with current electrode separation from 2 to 500 m to identify the depths and resistivity values of the identified geo-electric layers. Through data analysis using WinResist software, the apparent resistivity, thicknesses and depths and the thicknesses of the aquifers were generated. The resistivity and depths were modelled to generate resistivity map and depth map. The resistivity of the aquiferous zone within the study area varied from 20.55 - 427.8 ohm-m at depths of between 10.7 - 40.05 m. Depth to the water table appears to be shallow at the south western part of the map. The interpreted geo-electric layers show a sequence of lateritic top soil, shale, sand and shale. The frequency distribution of the VES curves generated shows the presence of 3 to 5 layers with HK type as the highest. Also, a 2D model was generated using the correlation of VES to VES data and borehole data to VES data to show the underlying stratigraphy beneath the study area as well as the direction of ground water flow. Result of the VES curve analysis reveals that the sub-surface is underlain by three lithological layers namely: lateritic top soil, shale, sand and shales with NW direction of groundwater flow from the 2D model. Groundwater prospective zones can be seen along NW, SW and central parts of the study area which have low resistivity values.

Electromagnetic anomaly before earthquakes measured by electromagnetic experiments

Three experiments are carried out for earthquake monitoring using electromagnetic （EM） methods in recent years. Some earthquakes occurred in chance of the measurement time period for each experiment and the anomalies were recorded before the shocks. The observation at a site 20 km away from the epicenter of Zhangbei Ms6.2 earthquake in 1998 shows that the apparent resistivity decreases in the strike direction before and/or during the earthquake and the resistivity increases in the decline direction. This anomalous variation in apparent resistivity accounts for about 20%. The apparent resistivities at a site in the epicentral area decrease in the strike and decline directions before and/or during the earthquake and increase after shocks. The experiments using artificial electromagnetic signals with super low frequency carried out in 1999 show that the resolution and stability of electric and magnetic spectra are improved. The spectra of electric and magnetic fields and apparent resistivity at the Baodi station began to anomalously change two days before the Qian＇an earthquake with 120 km distant to the station. The anomalous variation of electric and magnetic spectra is about twice as great as normal variation and the apparent resistivity changes by about 20%. The measurements in active seismic area of Yunnan province in the year 2005 indicate that the electric and magnetic spectra anomalously change by one order before the Taoyuan earthquake about 100 km away from the observatories. But the measurements at the sites in Beijing area 2 000 km away from the epicenter do not show any anomaly.

Study on electric variations of media in epicentral area by geomagnetic transfer functions

Taking the graph of the apparent resistivity Pyx in Lanzhou area, its geomagnetic transfer function variations andthe investigation of moderate-strong local earthquakes as example and from.the viewpoint of seismomagnetic effect,the authors found that subterranean conductivity values might be applied to the division of Lanzhou areafrom the surface downward into four layers, i. e., the anomalous, the transitional,the non-anomalous and theanomalous layer. Only the transfer function modular |A| and |B|,magnetic azimuth ap with its variance ap,and the total variance yi in the anomalous layers showed obvious anomalies with time changes. Thus, it could beconjectured that the anomalous layer was closely associated with the anisotropic variations of conductivity of thesubterranean media in the seismicity area.This phenomenon might provide a way to the further study of itsmechanism. It is needed to study the inherent connotation deeply.

Some results of modeling D-D seismogenic pattern by the fracture model experiment of large-scale rock samples(I)

sing the natural limestone samples taken from the field with dimension of 500 mm×500 mm×1 000 mm, the D-D (dilatancy-diffusion) seismogeny pattern was modeled under the condition of water injection, which observes the time-space evolutionary features about the relative physics fields of the loaded samples from deformation, formation of microcracks to the occurrence of main rupture. The results of observed apparent resistivity show: ① The process of the deformation from microcrack to main rupture on the loaded rock sample could be characterized by the precursory spatial-temporal changes in the observation of apparent resistivity; ② The precursory temporal changes of observation in apparent resistivity could be divided into several stages, and its spatial distribution shows the difference in different parts of the rock sample; ③ Before the main rupture of the rock sample the obvious ″tendency anomaly′ and ′short-term anomaly″ were observed, and some of them could be likely considered as the ″impending earthquake ″anomaly precursor of apparent resistivity. The changes and distribution features of apparent resistivity show that they are intrinsically related to the dilatancy phenomenon of the loaded rock sample. Finally, this paper discusses the mechanism of resistivity change of loaded rock sample theoretically.

Earthquake Electromagnetic Precursor Anomalies Detected by a New Ground-based Observation Network

It is a debated topic if there are any observable precursor anomalies prior to the earthquake(EQ hereafter)and if the stronger EQ can be successfully predicted.During last few decades quite a lot of observable electromagnetic(EM)precursors were published by using techniques equipped in either satellites or on ground-based stations.But there are only a few cases that the shortterm precursor anomalies of EM field before earthquakes were observed by using alternate EM fields on ground.This paper will present a new EM observation network built in recent years and show a new finding of EM field with the variation of a one-year cycle observed using the network.As an example,the short-term precursor anomalies of apparent resistivity before the Yangbi EQ(Ms 5.1)occurred on March 27,2017 in Yunnan Province will be studied.The observed anomalous phenomena indicate that the anomaly before the EQ can be captured only if reasonable effective methods including sophisticated analytical techniques are used,and it is believed that continuously observed data on the fixed observation network for a long time is an effective means for studying anomalies that appeared before earthquakes.This network can also play an important role in studying the EM environment from space.

3-D approximate inversion for transient electromagnetic soundings

In this paper, based on the theories of smoke ring, current lines in the Earth, induced by transmitting source on the Earths surface, are regarded as downward moving and outward expanding current filaments which are called as images of transmitting source. By comparing the magnetic field of the current filaments with that measured near the source, we can determine the image depth which can be used for estimating the downward vertical velocity of the image by using a cubic spline interpolation method. Then the resistivities varying with depth can be approximately estimated through a comparison between the estimated velocity of the image and the downward diffusing velocity in a homogeneous half space. We discussed the case of a circular transmitting loop, and developed a corresponding approximate inversion program which has been tested for 1-D layered-Earth models and real data.

Use of a Multiple Regression Model in the Estimation of Water Borehole Flows in the Middle of Cracked Basement in Côte d’Ivoire

The objective of this study was to propose a mathematical regression model to estimate the exploitation flow rate of a water borehole from geophysical parameters in the midst of a fissured basement in the central-eastern part of C?te d’Ivoire. The data of the study are both hydrogeological and geophysical parameters from one hundred and eleven (111) data sheets of (111) water and geophysical boreholes. Two methods were used. The Normal Principal Component Analysis (NPCA) method applied to the data made it possible to select the explanatory variables (geophysical parameters) for borehole productivity. The multiple linear regression method subsequently made it possible to propose a mathematical model capable of estimating the exploitation rate from the geophysical parameters. The results indicate a very strong correlation (0.87) between longitudinal conductivity and flow rate, with flow rate and apparent resistivity negatively correlated. The multiple linear regression method highlighted two relevant explanatory variables, longitudinal conductivity and apparent resistivity. These two geophysical parameters contributed to a mathematical model in the form Q = C1X1 + C2X2 + ... + CnXn + C0. the real model obtained in this work is Q = 0.82Cl - 0.12Rho.app + 2.5. The resulting model is efficient with a correlation of 86% in calibration and 95% in validation. A bias of 0.37 in calibration and 0.82 in validation is observed. Finally, the square root mean square error (RMSE) is 3.10 to 3.38 respectively in calibration and validation.