Establishment of Microbial Limit Test Methods for Two Hospital Preparations

[Objectives] This study was conducted to establish microbial limit test methods for traditional Chinese medicine preparations Yunpi Granules and Bupi Qiangli Paste. [Methods] According to General Rules of Part IV of Chinese Pharmacopoeia, applicability tests were conducted on microbial limit test methods for the above two traditional Chinese medicine preparations by the plate method. [Results] The established methods showed recovery values in the range of 0.5-2.0 for both experimental strains, and the control bacteria could be detected in the experimental group, but not in the negative control group. [Conclusions] The microbial limit test methods were reliable for the two traditional Chinese medicine preparations and could be used for quality control.

Effects of Sulfur Fertilizer Application Methods on Grain Protein Content During Filling Stage of Winter Wheat

[ Objective] The experiment aimed to provide a theoretical base of optimal cultivation management for the high yield and good quality and high efficiency of winter wheat. [ Method] The effects of two sulfur fertilizer application methods on dynamic changes of grain protein content and glutenin content of Yumai 49 and Yumai 66 during wheat grain filling stage were studied under the field conditions. [Result] Both the grain protein and glutenin content of two cultivars were increased by sulfur fertilizer, particularly, the effects on Yumai 49 were more significant.[ Conclusion] The grain content and glutenin content of different wheat cultivars could be increased by taking different sulfur fertilizer application methods.

Effects of Different Nitrogen Application Methods on Enzyme Activities in Leaves at Late Growth Stage of Spring Maize

[Objective] This paper aimed at exploring the effects of different nitrogen application methods on the enzyme activities of leaves at ear position in late growth stage of maize. [Method] By pot experiment, the superoxide dismutase （SOD） activity, peroxidase （POD） activity, malonyl dialdehyde （MDA） content and soluble protein content were determined. [Result] At the filling stage and ripening stage, with the increasing of nitrogen application rate, MDA content gradually decreased, while SOD activity, POD activity and soluble protein content increased. MDA content with two topdressing nitrogen was lower than that with one top dressing nitrogen at the same nitrogen application rate, while SOD activity, POD activity and soluble protein content with two topdressing nitrogen were higher than that with one topdressing nitrogen. [Conclusion] Different nitrogen application methods have relatively significant effects on the MDA content, SOD activity, POD activity and soluble protein content, which is of certain directive significance for preventing spring maize prematuration.

Application of Geophysical and Remote Sensing Methods to Predict for Potash Resource

1 Introduction Potassium is listed as one of the shortage of mineral resources in china.Geophysical and remote sensing technology plays an important role in prospecting for potash ressources.

Application of Gravitational Methods to Prospecting Salt(Potash) Rocks in the Kuqa Depression

The Kuqa depression deposited thick rock salt,which has a lower density than surrounding rocks.When salt bodies form a certain scale,obvious negative gravity anomalies can be detected in the surface.Therefore,gravitational method can quickly obtain the shape,plane distribution of deep-seated salt bodies and overall tectonic morphology of the basin.

Numerical Mathematics Theory,Methods and Applications

Aims and Scope: Numerical Mathematics:Theory, Methods and Applications(NM-TMA) publishes high-quality original

Numerical Mathematics Theory,Methods and Applications

Aims and Scope: Numerical Mathematics:Theory, Methods and Applications (NM-TMA) publishes high-quality original research papers on the construction,analysis and application of numerical methods for solving scientific problems.Important research and expository papers devoted to the numerical solution of mathematical problems arising in all areas of science and technology are expected.The journal originates from the journal Numerical Mathematics:A Journal of Chinese Universities (English Edition).

Effectuate Application of Optimum Methods in Grinding Process

Random error of grinding process is central factor th at give an effect on grinding quality all through. Optimum methods are usually a pplied on grinding process for higher productivity and preferable grinding quali ty. But the grinding quality can’t be reliably controlled now and then while opt imal solution of grinding processing parameters have been applied in production, because of two involved aspects which are availability of established empirical formulas and reliability of setting up optimum mathematical model. That is to s ay, there is particular application of optimum methods in grinding process. This paper discussed that how to confirm conditions of grinding test which be po int to grinding peculiarity when test design and regression analysis are used to setting up some empirical formulas. In order to reduce effect of random errors on precision of the empirical formulas and enable them to be applied widely, a m ethod that a lot of random error can be sufficiently contained in grinding test was suggested. And then, A means to ameliorate restriction formulas of grinding quality is expounded based on marked level of the empirical formulas and improve d reliability of optimum mathematical model is given, which offer an effectual w ay for solving grinding quality out of control as a result of random error and w orkable optimal solution of grinding processing parameters can be applied in the production really. Finally, an example is presented.

Applicability of Microbial Limit Test Method for Qingyan Zhisou Powder

[Objectives]This study was conducted to establish a microbial limit test method for Qingyan Zhisou Powder.[Methods]Applicability tests were carried out according to Microbial Limit Tests of Non-sterile Products,General Rules 1105-1107 of Part IV of Chinese Pharmacopoeia,2020.[Results]Qingyan Zhisou Powder had a strong bacteriostatic effect on Pseudomonas aeruginosa.After increasing the dilution ratio(1:40),the bacteriostatic effect was obviously eliminated.When the total number of aerobic microbes was determined by the test liquid dilution method(1:40),the recovery values were in the range of 50%-200%;and when using the test liquid(1:10)to determine the total number of mold and yeasts,the recovery ranged from 50%to 200%.Escherichia coli,Salmonella and bile-tolerant Gram-negative bacteria were detected by both the routine method and dilution method in experimental groups.[Conclusions]The microbial limit test of Qingyan Zhisou Powder adopted the test liquid dilution method,and the routine method could be used for the test of Escherichia coli,Salmonella and bile-tolerant Gram-negative bacteria.The applicability test of the method is feasible,with scientific and accurate results,and the method can effectively control the quality of the preparation and is recommended for popularization.

为国际信息计量学发展提供中国学者的解决方案——评邱均平教授团队《信息计量学》英文版

《informetrics:theory,methods and applications(信息计量学:理论,方法和应用)》记录了不同时期信息计量学的研究内容,揭示了“三计学”向“五计学”的发展动因,对信息计量学的未来趋势研究具有重要意义。本文通过回顾邱均平教授团队“三计学”、“五计学”的研究发展史,结合书籍的章节内容、创新点、实用性等方面,对其在国际信息计量学领域的学术影响力以及贡献程度进行分析和总结。可以看出,《informetrics:theory,methods and applications(信息计量学:理论,方法和应用)》不仅仅阐释了信息计量学完整的研究范式,还向全世界展现了中国信息计量研究的多维度突破与创新,为国际信息计量学发展提供新思路。

花生根瘤菌接种剂适宜施用方法的研究

根瘤菌在农业生产上的应用,由菌种、菌剂和应用方法三个环节构成。优良的菌种、优质的菌剂和适宜的施用方法三者的密切配合,是充分发挥根瘤菌一豆类植物共生固氮作用的根本保障。有了优良的菌种和优质的菌剂之后,应用方法又显得格外重要。为了探索花生根瘤菌的适宜施用方法,我们对几种施用方法进行了比较研究,现将结果报道如下。

Yield Chemical Prevention and Control Test of Asterococcus muratae Kuwana

In field chemical prevention and control test of A. muratae, effect of re- moving tertia coating method was the fastest in five pesticide application methods, and preventive effect of burying pesticide method at the root was significantly im- proved after 14 days. Corrected death rates of the two methods were both above 70%, and corrected death rate of burying pesticide method at the root reached 100% after using pesticide secondly for 7 days. For different pesticide tests, pre- vention and control effect of matrine water aqua stoste, matrine water aqua 10 times liquid and imidacloprid wet powder 10 times liquid coating was the best, and burying pesticide method at the root and pesticide liquid irrigating root method had the best prevention and control effect when respectively used imidacloprid wet pow- der and dimethoate missible oil. It was suggested to use 40-60 g/plant of imidaclo- pdd wet powder at the root during occurrence period of nymphae, which had simple operation and good effect.

Response of Tomato Plants to a New Application Method of Polyolefin-Coated Fertilizer

The response of tomato （Lycopersicon esculentum） plants basically fertilized with 0.3 g N per plant of compound fertilizer with a N：P2O5：K2O ratio of 20：10：20 to sticks of polyolefin-coated fertilizer （POCF） （LongT0 with a N：P2Os：K2O ratio of 14：12：14） applied 23 d after transplanting was investigated using rooting boxes in the greenhouse. The results at 26 and 40 d after stick fertilizer treatment showed that the use of the stick fertilizer greatly increased the production of many new fine roots from the tomato plants. Compared to the unfertilized control, root length and root length density in the stick fertilizer treatment increased by 3.6-6.7 fold. In the soil zones near the stick fertilizer, root weight and root mass density were also significantly higher for the stick fertilizer treatment. Additionally, the use of the stick fertilizer increased the N, P and K concentrations in the leaves and stems of the tomato plants. The new fine roots growing near the stick fertilizer not only absorbed more nutrients and translocated them to the shoots, but also contained more nutrients within themselves. The soil ammonium and nitrate N data showed that N released from the stick fertilizer played a major role in inducing the production of new fine roots. These results indicated that stick fertilizer could be used as an alternative to the co-situs application technique to change and control the root distribution of crops as well as to increase the potential capacity of roots for water and nutrient absorption.

Influence of nitrogen and sulfur fertilization on quality of canola(Brassica napus L.) under rainfed conditions

Field experiments were conducted at Cereal Crops Research Institute, Pirsabak, Nowshera, Pakistan, during winter 2003～2004; 2004～2005 to evaluate the effect of nitrogen; sulfur levels; methods of nitrogen application on canola (Brassica napus L. cv. Bulbul-98) under rainfed conditions. Four levels of S (0, 10, 20,; 30 kg/ha); three levels of N (40, 60,; 80 kg/ha); a control treatment with both nutrients at zero level were included in the experiments. Sulfur levels were applied at sowing while N levels were applied by three methods (100% soil application, 90% soil+10% foliar application,; 80% soil +20% foliar application). The experiments were laid out in randomized complete block (RCB) design having four replications. Oil content increased significantly up to 20 kg S/ha but further increase in S level did not enhance oil content. Glucosinolate content increased from 13.6 to 24.6 μmol/g as S rate was increased from 0 to 30 kg/ha. Protein content increased from 22.4% to 23.2% as S rate was increased from 0 to 20 kg/ha. Oil content responded negatively to the increasing N levels. The highest N level resulted in the highest values for protein (23.5%); glucosinolate (19.9 μmol/g) contents. Methods of N application had no significant impact on any parameters under study.

Blast Pressure Measurements of an Underwater Detonation in the Sea

Blast pressure measurements of a controlled underwater explosion in the sea were carried out.An explosive of 25-kg trinitro-toluene(TNT)equivalent was detonated,and the blast pressures were recorded by eight diferent high-performance pressure sensors that work at the nonresonant high-voltage output in adverse underwater conditions.Recorded peak pressure values are used to establish a relationship in the well-known form of empirical underwater explosion(UNDEX)loading formula.Constants of the formula are redetermined by employing the least-squares method in two diferent forms for best ftting to the measured data.The newly determined constants are found to be only slightly diferent from the generally accepted ones.

Application of the Gravity Method to the Iron Ore Exploration in Eastern Hebei Province

The nation-wide iron ore exploration is primarily based on aeromagnetic survey,based upon which a series of ground follow-up and drilling examination were carried out,and then reconnaissance and detailed investigation and exploration were fulfilled.However,for some large.

Active blocks and their deformations derived from the velocity field in North China

Based on the horizontal movement velocities and their error estimations of 144 GPS stations in North China de-duced from the results obtained from multiple GPS measurements carried out in the period of 1992~2001, the horizontal deformation in the area is studied. The movements, entire deformations, local deformations, activity patterns and intensities along the boundary zones are derived. And then the risk of strong earthquake in the area is estimated. In the research, the horizontal displacement observations can be considered as the sum of three parts. The first part is the entire motion following Eurasian plate, which can be derived from NUVAL-IA model; the second part is the relative motions and deformations between the sub-tectonic blocks in the studied area, which can be derived from a set of displacement observations determined by the expanded QUAD method in the paper; the third part is the local deformations and errors in the sub-tectonic blocks, which can be described as the inhomoge-neous strains of the block. The method and results are introduced in detail in the paper.

Application of the Embedded-atom Method to Liquid Binary Cu-Ni Alloys

A simple analytic embedded-atom model of monoatoms that includes more than nearest neighbours has been extended to study properties of binary liquid Cu-Ni alloys, here the two-body potential between different species of atoms is taken as a function of the two-body potential for the pure metals with a unique form which yields alloy models with the same invariance to electron density transformations as monoatomic models. Faber-Ziman structure factors have been computed by molecular dynamics simulation on the base of this model. The results are in good agreement with experimental data given by Waseda, thus supporting the overall validity of the approach, especially for cross potential of Cu-Ni pair. Further, a detailed description of structure of binary liquid Cu-Ni alloys with different compositions have been performed using pair analysis and bond orientational order method etc., and then the chemical short range order has also been examined to reveal the structural characterization.