Establishment of Microbial Limit Test Methods for Two Hospital Preparations

[Objectives] This study was conducted to establish microbial limit test methods for traditional Chinese medicine preparations Yunpi Granules and Bupi Qiangli Paste. [Methods] According to General Rules of Part IV of Chinese Pharmacopoeia, applicability tests were conducted on microbial limit test methods for the above two traditional Chinese medicine preparations by the plate method. [Results] The established methods showed recovery values in the range of 0.5-2.0 for both experimental strains, and the control bacteria could be detected in the experimental group, but not in the negative control group. [Conclusions] The microbial limit test methods were reliable for the two traditional Chinese medicine preparations and could be used for quality control.

Application of Geophysical and Remote Sensing Methods to Predict for Potash Resource

1 Introduction Potassium is listed as one of the shortage of mineral resources in china.Geophysical and remote sensing technology plays an important role in prospecting for potash ressources.

Application of Gravitational Methods to Prospecting Salt(Potash) Rocks in the Kuqa Depression

The Kuqa depression deposited thick rock salt,which has a lower density than surrounding rocks.When salt bodies form a certain scale,obvious negative gravity anomalies can be detected in the surface.Therefore,gravitational method can quickly obtain the shape,plane distribution of deep-seated salt bodies and overall tectonic morphology of the basin.

Numerical Mathematics Theory,Methods and Applications

Aims and Scope: Numerical Mathematics:Theory, Methods and Applications (NM-TMA) publishes high-quality original research papers on the construction,analysis and application of numerical methods for solving scientific problems.Important research and expository papers devoted to the numerical solution of mathematical problems arising in all areas of science and technology are expected.The journal originates from the journal Numerical Mathematics:A Journal of Chinese Universities (English Edition).

Numerical Mathematics Theory,Methods and Applications

Aims and Scope: Numerical Mathematics:Theory, Methods and Applications(NM-TMA) publishes high-quality original

Effectuate Application of Optimum Methods in Grinding Process

Random error of grinding process is central factor th at give an effect on grinding quality all through. Optimum methods are usually a pplied on grinding process for higher productivity and preferable grinding quali ty. But the grinding quality can’t be reliably controlled now and then while opt imal solution of grinding processing parameters have been applied in production, because of two involved aspects which are availability of established empirical formulas and reliability of setting up optimum mathematical model. That is to s ay, there is particular application of optimum methods in grinding process. This paper discussed that how to confirm conditions of grinding test which be po int to grinding peculiarity when test design and regression analysis are used to setting up some empirical formulas. In order to reduce effect of random errors on precision of the empirical formulas and enable them to be applied widely, a m ethod that a lot of random error can be sufficiently contained in grinding test was suggested. And then, A means to ameliorate restriction formulas of grinding quality is expounded based on marked level of the empirical formulas and improve d reliability of optimum mathematical model is given, which offer an effectual w ay for solving grinding quality out of control as a result of random error and w orkable optimal solution of grinding processing parameters can be applied in the production really. Finally, an example is presented.

Applicability of Microbial Limit Test Method for Qingyan Zhisou Powder

[Objectives]This study was conducted to establish a microbial limit test method for Qingyan Zhisou Powder.[Methods]Applicability tests were carried out according to Microbial Limit Tests of Non-sterile Products,General Rules 1105-1107 of Part IV of Chinese Pharmacopoeia,2020.[Results]Qingyan Zhisou Powder had a strong bacteriostatic effect on Pseudomonas aeruginosa.After increasing the dilution ratio(1:40),the bacteriostatic effect was obviously eliminated.When the total number of aerobic microbes was determined by the test liquid dilution method(1:40),the recovery values were in the range of 50%-200%;and when using the test liquid(1:10)to determine the total number of mold and yeasts,the recovery ranged from 50%to 200%.Escherichia coli,Salmonella and bile-tolerant Gram-negative bacteria were detected by both the routine method and dilution method in experimental groups.[Conclusions]The microbial limit test of Qingyan Zhisou Powder adopted the test liquid dilution method,and the routine method could be used for the test of Escherichia coli,Salmonella and bile-tolerant Gram-negative bacteria.The applicability test of the method is feasible,with scientific and accurate results,and the method can effectively control the quality of the preparation and is recommended for popularization.

为国际信息计量学发展提供中国学者的解决方案——评邱均平教授团队《信息计量学》英文版

《informetrics:theory,methods and applications(信息计量学:理论,方法和应用)》记录了不同时期信息计量学的研究内容,揭示了“三计学”向“五计学”的发展动因,对信息计量学的未来趋势研究具有重要意义。本文通过回顾邱均平教授团队“三计学”、“五计学”的研究发展史,结合书籍的章节内容、创新点、实用性等方面,对其在国际信息计量学领域的学术影响力以及贡献程度进行分析和总结。可以看出,《informetrics:theory,methods and applications(信息计量学:理论,方法和应用)》不仅仅阐释了信息计量学完整的研究范式,还向全世界展现了中国信息计量研究的多维度突破与创新,为国际信息计量学发展提供新思路。

花生根瘤菌接种剂适宜施用方法的研究

根瘤菌在农业生产上的应用,由菌种、菌剂和应用方法三个环节构成。优良的菌种、优质的菌剂和适宜的施用方法三者的密切配合,是充分发挥根瘤菌一豆类植物共生固氮作用的根本保障。有了优良的菌种和优质的菌剂之后,应用方法又显得格外重要。为了探索花生根瘤菌的适宜施用方法,我们对几种施用方法进行了比较研究,现将结果报道如下。

海上水下爆炸的爆炸压力测量

Blast pressure measurements of a controlled underwater explosion in the sea were carried out.An explosive of 25-kg trinitro-toluene(TNT)equivalent was detonated,and the blast pressures were recorded by eight diferent high-performance pressure sensors that work at the nonresonant high-voltage output in adverse underwater conditions.Recorded peak pressure values are used to establish a relationship in the well-known form of empirical underwater explosion(UNDEX)loading formula.Constants of the formula are redetermined by employing the least-squares method in two diferent forms for best ftting to the measured data.The newly determined constants are found to be only slightly diferent from the generally accepted ones.

Applicability of the Welch method for examining self-noise level parameters for broadband seismometers

Seismometer self-noise levels were determined using Sleeman’s three-sensor method in combination with the Welch method for different parameter combinations. The self-noise levels decreased with the increasing segment window length, which is equivalent to the subwindow length, and with the increasing segment overlap rate for different frequency points at a fixed band. After the statistical examination of 9800 different parameter combinations, a zone of reasonable self-noise calculation parameter combinations was identified. Reasons for the unsuitability of certain parameter combinations were explored with respect to their distortion of the seismometer’s self-noise levels.

Active blocks and their deformations derived from the velocity field in North China

Based on the horizontal movement velocities and their error estimations of 144 GPS stations in North China de-duced from the results obtained from multiple GPS measurements carried out in the period of 1992~2001, the horizontal deformation in the area is studied. The movements, entire deformations, local deformations, activity patterns and intensities along the boundary zones are derived. And then the risk of strong earthquake in the area is estimated. In the research, the horizontal displacement observations can be considered as the sum of three parts. The first part is the entire motion following Eurasian plate, which can be derived from NUVAL-IA model; the second part is the relative motions and deformations between the sub-tectonic blocks in the studied area, which can be derived from a set of displacement observations determined by the expanded QUAD method in the paper; the third part is the local deformations and errors in the sub-tectonic blocks, which can be described as the inhomoge-neous strains of the block. The method and results are introduced in detail in the paper.

Application of the Gravity Method to the Iron Ore Exploration in Eastern Hebei Province

The nation-wide iron ore exploration is primarily based on aeromagnetic survey,based upon which a series of ground follow-up and drilling examination were carried out,and then reconnaissance and detailed investigation and exploration were fulfilled.However,for some large.

Application of the Embedded-atom Method to Liquid Binary Cu-Ni Alloys

A simple analytic embedded-atom model of monoatoms that includes more than nearest neighbours has been extended to study properties of binary liquid Cu-Ni alloys, here the two-body potential between different species of atoms is taken as a function of the two-body potential for the pure metals with a unique form which yields alloy models with the same invariance to electron density transformations as monoatomic models. Faber-Ziman structure factors have been computed by molecular dynamics simulation on the base of this model. The results are in good agreement with experimental data given by Waseda, thus supporting the overall validity of the approach, especially for cross potential of Cu-Ni pair. Further, a detailed description of structure of binary liquid Cu-Ni alloys with different compositions have been performed using pair analysis and bond orientational order method etc., and then the chemical short range order has also been examined to reveal the structural characterization.

Fast Measurement of Dielectric Conductivity for Space Application by Surface Potential Decay Method

Surface potential decay of polymers for electrical insulation can help to determine the dark conductivity for spacecraft charging analysis. Due to the existence of radiation-induced conductivity, it decays fast in the first few hours after irradiation and exponentially slowly for the remaining time. The measurement of dark conductivity with this method usually takes the slow part and needs a couple of days. Integrating the Fowler formula into the deep dielectric charging equations, we obtain a new expression for the fast decay part. The experimental data of different materials, dose rates and temperatures are fitted by the new expression. Both the dark conductivity and the radiation-induced conductivity are derived and compared with other methods. The result shows a good estimation of dark conductivity and radiation-induced conductivity in high-resistivity polymers, which enables a fast measurement of dielectric conductivity within about 600 rain after irradiation.

APPLICATION OF THE METHOD OF THE RECIPROCAL THEOREM TO FINDING DISPLACEMENT SOLUTIONS OF CUBES

In this paper the method of reciprocal theorem is extended to find solutions of three-D problems of elasticity.First we give the basic solution of the cube with six surfaces fixed as the basic system and then using the reciprocal theorem between the basic system acted on by unit concentrated loads and the actual system with prescribed surface displacements, we find displacement solution of the actual system.

MIXED HYBRID PENALTY FINITE ELEMENT METHOD AND ITS APPLICATION

The penalty and hybrid methods are being much used in dealing with the general incompatible element, With the penalty method convergence can always be assured, but comparatively speaking its accuracy is lower, and the condition number and sparsity are not so good. With the hybrid method, convergence can be assured only when the rank condition is satisfied. So the construction of the element is extremely limited. This paper presents the mixed hybrid penalty element method, which combines the two methods together. And it is proved theoretically that this new method is convergent, and it has the same accuracy, condition number and sparsity as the compatible element. That is to say, they are optimal to each other.Finally, a new triangle element for plate bending with nine freedom degrees is constructed with this method (three degreesof freedom are given on each corner -- one displacement and tworotations), the calculating formula of the element stiffness matrix is almost the same as that of the old triangle element for plate bending with nine degrees of freedom But it is converged to true solution with arbitrary irregrlar triangle subdivision. If the true solution u?H3 with this method the linear and quadratic rates of convergence are obtianed for three bending moments and for the displacement and two rotations respectively.