We present the thermal expansion coefficient （TEC） measurement technology of compensating for the effect of variations in the refractive index based on a Nd： YA G laser feedback system, the beam frequency is shifte...We present the thermal expansion coefficient （TEC） measurement technology of compensating for the effect of variations in the refractive index based on a Nd： YA G laser feedback system, the beam frequency is shifted by a pair of aeousto-optic modulators and then the heterodyne phase measurement technique is used. The sample measured is placed in a muffle furnace with two coaxial holes opened on the opposite furnace walls. The measurement beams hit perpendicularly and coaxially on each surface of the sample. The reference beams hit on the reference mirror and the high-refiectivity mirror, respectively. By the heterodyne configuration and computing, the influences of the vibration, distortion of the sample supporter and the effect of variations in the refractive index are measured and largely minimized. For validation, the TECs of aluminum samples are determined in the temperature range of 29-748K, confirming not only the precision within 5 × 10-7 K-1 and the accuracy within 0.4% from 298K to 448K but also the high sensitivity non-contact measurement of the lower reflectivity surface induced by the sample oxidization from 448 K to 748 K.展开更多
Collision between particles plays an important role in determining the hydrodynamic characteristics of gas-solid flow in a fluidized bed. In the present work, earlier work （Loha, Chattopadhyay, ＆ Chatterjee, 2013） ...Collision between particles plays an important role in determining the hydrodynamic characteristics of gas-solid flow in a fluidized bed. In the present work, earlier work （Loha, Chattopadhyay, ＆ Chatterjee, 2013） was extended to study the effect of the elasticity of particle collision on the hydrodynamic behavior of a bubbling fluidized bed filled with 530-~m particles. The Eulerian-Eulerian two-fluid model was used to simulate the hydrodynamics of the bubbling fluidized bed, where the solid-phase properties were calculated by applying the kinetic theory of granular flow. To investigate the effect of the elasticity of particle collision, different values of the coefficient of restitution were applied in the simulation and their effects were studied in detail. Simulations were performed for two different solid-phase wall boundary conditions. No bubble formation was observed for perfectly elastic collision. The bubble formation started as soon as the coefficient of restitution was set below 1.0, and the space occupied by bubbles in the bed increased with a decrease in the coefficient of restitution. Simulation results were also compared with experimental data available in the literature, and good agreement was found for coefficients of restitution of 0.95 and 0.99.展开更多
基金Supported by the National Natural Science Foundation of China under Grant No F050306
文摘We present the thermal expansion coefficient （TEC） measurement technology of compensating for the effect of variations in the refractive index based on a Nd： YA G laser feedback system, the beam frequency is shifted by a pair of aeousto-optic modulators and then the heterodyne phase measurement technique is used. The sample measured is placed in a muffle furnace with two coaxial holes opened on the opposite furnace walls. The measurement beams hit perpendicularly and coaxially on each surface of the sample. The reference beams hit on the reference mirror and the high-refiectivity mirror, respectively. By the heterodyne configuration and computing, the influences of the vibration, distortion of the sample supporter and the effect of variations in the refractive index are measured and largely minimized. For validation, the TECs of aluminum samples are determined in the temperature range of 29-748K, confirming not only the precision within 5 × 10-7 K-1 and the accuracy within 0.4% from 298K to 448K but also the high sensitivity non-contact measurement of the lower reflectivity surface induced by the sample oxidization from 448 K to 748 K.
文摘Collision between particles plays an important role in determining the hydrodynamic characteristics of gas-solid flow in a fluidized bed. In the present work, earlier work （Loha, Chattopadhyay, ＆ Chatterjee, 2013） was extended to study the effect of the elasticity of particle collision on the hydrodynamic behavior of a bubbling fluidized bed filled with 530-~m particles. The Eulerian-Eulerian two-fluid model was used to simulate the hydrodynamics of the bubbling fluidized bed, where the solid-phase properties were calculated by applying the kinetic theory of granular flow. To investigate the effect of the elasticity of particle collision, different values of the coefficient of restitution were applied in the simulation and their effects were studied in detail. Simulations were performed for two different solid-phase wall boundary conditions. No bubble formation was observed for perfectly elastic collision. The bubble formation started as soon as the coefficient of restitution was set below 1.0, and the space occupied by bubbles in the bed increased with a decrease in the coefficient of restitution. Simulation results were also compared with experimental data available in the literature, and good agreement was found for coefficients of restitution of 0.95 and 0.99.
