Eco-friendly aqueous foam stabilized by cellulose microfibers with great salt tolerance and high temperature resistance

A low-cost eco-friendly aqueous foam,especially the robust foam with great tolerance to high salinity and high temperature,is in great demand in the oil industry,e.g.,oil and gas well or geothermal well drilling.Herein,an ultra-stable aqueous foam was developed using the biodegradable cellulose microfiber(CMF)as a foam stabilizer.The foam stabilized by CMF shows excellent tolerance to the high concentration of NaCl(6.0 wt%)and CaCl_(2)(0.25 wt%)and the related drainage half-life times(T_(0.5))reach 1750 and 2340 s respectively.By contrast,the foams without CMF are completely drained(T_(0.5)=0 s)when NaCl concentration is greater than 6.0 wt%or CaCl_(2) concentration is greater than 0.20 wt%.Notably,T0.5 of the foams stabilized by CMF at these saline concentrations still can maintain above 1000 s even after aging at 120℃ for 16 h,exhibiting an outstanding foam-stabilizing performance at high temperature.Experimental results suggest that the salt and high-temperature tolerance of CMF in foam stabilization is attributed to the electrically uncharged surfaces,the formation of a gel-like structure and the excellent thermal stability.This work not only provides a promising candidate of aqueous foam stabilizer to deal with high temperature and high salinity but also presents a natural-based solution for an environmentally friendly drilling industry in the future.

Experimental investigation on the spread of aqueous foam over ethanol surface

The presence of ethanol has an adverse effect on foam spreading,and ethanol fire is difficult to extinguish with aqueous fire-fighting foams.Thus,it is necessary to explore the foam formulation suitable for ethanol fuels and study the spreading behavior of foam over ethanol surface.In the current work,stable foams based on hydrocarbon surfactant(SDS),fluorocarbon surfactant(FC1157),and polymers(XG)were prepared by using the compressed-air foam system.The spreading behaviors of foam on polar ethanol and non-polar heptane surface were observed and compared.Furthermore,the effects of stabilizer concentrations,foam flow rates and expansion ratios on foam spreading performance were investigated,respectively.The results indicate that aqueous SDS foam can spread on the heptane layer continuously,but it is difficult to cover the ethanol surface.The addition of XG and FC1157 can synergistically improve the spreading performance of aqueous foam over ethanol.Depending on stabilizer concentrations,there are remarkable differences in foam spreading behaviors.Besides,different foam application parameters including expansion ratios and foam flow rates significantly affect the foam spreading rate,despite the same foam formulation.The research methods and results guide the optimal design of foam formulations as well as the practical application of aqueous foam for ethanol fire extinguishment.

Fabrication of porous adsorbents from eco-friendly aqueous foam for high-efficient removal of cationic dyes and sustainable utilization assessment

Porous materials applied in environmental remediation have received researchers'extensive attention recently,but the related green and convenient preparation method is rarely reported.Here,we recommended a green and convenient strategy for the fabrication of porous material via aqueous foam templates,which was synergistically stabilized by Codonopsis pilosula(CP)and clay minerals of attapulgite(APT).The characterization results revealed that the APT was modified by organic molecules leached from CP and anchored at the air-water interface,which improved the foam stability significantly.The novel porous material of polyacrylamide/Codonopsis pilosula/attapulgite(PAM/CP/APT)templated from the aqueous foam via a polymerization reaction had excellent adsorption capacity for the cationic dyes methyl violet(MV)and methylene blue(MB),and the adsorption capacity can reach 755.85 mg/g and557.64 mg/g,respectively.More importantly,the adsorption capacity of spent adsorbent material was still over 200 mg/g after being recycled five times through a simple carbonization process,and then it was added to the plant pot,the total biomass was increased by about86.42%.This study provided a green and sustainable pathway for the preparation,application and subsequent processing of porous materials.

Removal of antibiotics from aqueous solution by using porous adsorbent templated from eco-friendly Pickering aqueous foams

The aqueous foam template without any solvent and only using the particles stabilizer has attracted much attention for preparation of the porous adsorbents.Herein,a novel porous adsorbent was fabricated via thermal-initiated polymerization of Pickering aqueous foams,which was stabilized by the natural sepiolite(Sep)and pine pollen,and utilized for the removal of antibiotic from aqueous solution.The stabilizing mechanism of Pickering aqueous foam of that the Sep was modified with the leaching substance from pine pollen and arranged orderly around the bubble to form a dense"shell"structure was revealed.The adsorbents possessed the hierarchical porous structure and excellent adsorption performance for antibiotic of chlorotetracycline hydrochloride(CTC)and tetracycline hydrochloride(TC).The equilibrium adsorption capacities of CTC and TC were achieved with 465.59 and 330.59 mg/g within 60 min at 25℃,respectively.The adsorption process obeyed Langmuir model and pseudo-second-order adsorption kinetic model.This work provided eco-friendly approach for fabricate porous adsorbents for wastewater treatment.

Hyperbranched Polymeric Fluorosurfactants:Synthesis,Surface Activity and Their Application in Firefighting Foams

Fluorosurfactants are the key ingredients in the formulations of aqueous film-forming foams(AFFFs)for extinguishing flammable liquids,thus developing high-efficient and low-toxic fluorosurfactants is desirable in AFFFs application.Herein,a series of hyperbranched polymeric fluorosu rfactants(HPFs)were successfully synthesized through sequentially modifying hyperbranched polyethylenimine(PEI)with the hydrophilic poly(ethylene glycol)(PEG)chains and the hydrophobic C6/C4-based perfluoroalkyl chains,which were verified by FTIR,^(1)H-and^(19)F-NMR.The surface tensions of all the HPFs in water were measured,and the corresponding physicochemical parameters were interpreted.It was found that the surface activities of HPFs could be tuned through adjusting the ratio of PEG to perfluoroalkyl chains,the length of perfluoroalkyl chains,the molecular weight of PEI core,but not the PEG chain length.In the binary mixture of HPFs with the commercial small molecule fluorosurfactant Capstone^(TM)1157(C1157),a strong synergism led to the elevation of surface activity,which was attributed to the efficient encapsulation of C1157 guests by the compact hyperbranched HPFs as the hosts.The utilization of HPF/C1157 as fluorosurfactant ingredients in AFFF formulations could realize much higher fire-extinguishing efficiency towards flammable oils than the control AFFFs prepa red from the polymeric Capstone^(TM)1460 or the neat C1157.

Synthesis and combined properties of novel fluorinated cationic surfactants derived from hexafluoropropylene dimer

Three novel fluorinated cationic surfactants were prepared by adopting perfluoro-2-methy1-2-pentene as raw substrate. The as-obtained fluorinated cationic surfactants exhibited excellent surface properties, all of them can reduce the surface tension of water to below 20.00mN/m at the critical micelle concentrations （CMC）. The incorporation of SDS, AOS, APG or LAB into 2-（4-（3,3,4,4,5,5,5-heptafluoro- 2,2-bis（trifluoromethyl）pentyl）benzamido）-N,N-dimethylethana-mine oxide 4a could generate much lower CMC and surface tension value at the CMC than individual 4a. Especially, the surface tension values of that combined APG/4a can be reduced to 17.31 mN/m. The excellent surface activities and their remarkable compatibility to various types of hydrocarbon surfactants make them as sustainable alternatives to PFOA （perfluorooctanoic acid, C7F15CO2H） and PFOS （perfluorooctane sulphonate, C8F17SO3X, with X = K, Na, H）.