An analytical solution for scattering of plane P waves by circular-arc layered alluvial valleys was derived by Fourier-Bessel series expansion technique, and the solution was utilized to analyze the effects of alluvia...An analytical solution for scattering of plane P waves by circular-arc layered alluvial valleys was derived by Fourier-Bessel series expansion technique, and the solution was utilized to analyze the effects of alluvial sequence and their relative stiffness on the scattering of incident waves.展开更多
The nitrided layers mainly containing TiN dendrites were fabricated by direct current nitrogen arc melting method. The test results show that the layers are harder and more resistant to wear than the titanium substrat...The nitrided layers mainly containing TiN dendrites were fabricated by direct current nitrogen arc melting method. The test results show that the layers are harder and more resistant to wear than the titanium substrate. Arc traveling speeds and arc currents have an effect on both the microstructures and the properties of the layers. Decreasing the arc traveling speed or increasing the arc current can obviously enhance the hardness and the wear resistance of the nitrided layers.展开更多
An analytical solution for scattering of incident plane SV waves by a circular-arc canyon with a covering layer was derived by Fourier-Bessel series expansion technique, and the solution was utilized to analyze the ef...An analytical solution for scattering of incident plane SV waves by a circular-arc canyon with a covering layer was derived by Fourier-Bessel series expansion technique, and the solution was utilized to analyze the effects of the covering layer on incident plane SV waves. It was shown that the covering layer in a canyon, even if it is very thin, amplifies incident plane SV waves tremendously, and the amplification can be two and half times more than that for a simple canyon; the stiffness and thickness of the covering layer also have great effects on incident plane SV waves.展开更多
The anode region of welding arc is divided into three subzones: the anode boundary layer, the presheath and the sheath. A model is established for analyzing the transport mechanism in the anode boundary layer. The com...The anode region of welding arc is divided into three subzones: the anode boundary layer, the presheath and the sheath. A model is established for analyzing the transport mechanism in the anode boundary layer. The computer program is designed and the governing equations of the dominating processes with the boundary conditions taken from the solutions of LTE plasmas are solved by applying the Runge-Kutta procedure. One parameter θ, the ratio of the heavy particle temperature at the free-fall edge to the anode surface temperature, is introduced into this study. The results indicate that then the parameter θ is equal to 6, the predicted heat flux at the anode surface matches the measured one. Based on the model, various plasma properties in the boundary layer can be obtained. The calculated results are in good agreement with the measurements.展开更多
Effective control of hypersonic transition is essential.In order to avoid affecting the structural proflle of the aircraft,as well as reducing power consumption and electromagnetic interference,a low-frequency surface...Effective control of hypersonic transition is essential.In order to avoid affecting the structural proflle of the aircraft,as well as reducing power consumption and electromagnetic interference,a low-frequency surface arc plasma disturbance experiment to promote hypersonic transition was carried out in theΦ0.25 m double-throat Ludwieg tube wind tunnel at Huazhong University of Science and Technology.Contacting printed circuit board sensors and non-contact focused laser differential interferometry testing technology were used in combination.Experimental results showed that the low-frequency surface arc plasma actuation had obvious stimulation effects on the second-mode unstable wave and could promote boundary layer transition by changing the spectral characteristics of the second-mode unstable wave.At the same time,the plasma actuation could promote energy exchange between the second-mode unstable wave and other unstable waves.Finally,the corresponding control mechanism is discussed.展开更多
The results of systematic numerical studies of graphene flakes growth in low-temperature arc discharge plasmas are presented. Diffusion-based growth model was developed, verified using the previously published experim...The results of systematic numerical studies of graphene flakes growth in low-temperature arc discharge plasmas are presented. Diffusion-based growth model was developed, verified using the previously published experiments, and used to investigate the principal effects of the process parameters such as plasma density, electron temperature, surface temperature and time of growth on the size and structure of the plasma-grown graphene flakes. It was demonstrated that the higher growth temperatures result in larger graphene flakes reaching 5 μm, and simultaneously, lead to much lower density of the carbon atoms adsorbed on the flake surface. The low density of the carbon adatoms reduces the probability of the additional graphene layer nucleation on surface of growing flake, thus eventually resulting in the synthesis of the most valuable single-layered graphenes.展开更多
In this work, the deposition process features of a copper coating on stainless steel substrate, using the pulse vacuum arc spraying method were researched. A continuous layer of copper was deposited on a stainless ste...In this work, the deposition process features of a copper coating on stainless steel substrate, using the pulse vacuum arc spraying method were researched. A continuous layer of copper was deposited on a stainless steel substrate, and a high degree of coating adhesion to the substrate was demonstrated. The thickness of coating using application time was calculated, and the surface unevenness was estimated. Inside the coating layer substrate material elements were observed, that could appear as a result of simultaneously plasma spraying on the surface of the substrate. The feature of this method was discovered, that surface plasma plays a significant role in the deposition process. Finally, it was shown that the device with a pulsed arc could effectively be used in industry, since it is possible to change the layer thickness in the range of hundreds of microns by varying the deposition time.展开更多
基金State Natural Science Foundation of China (No.59878032).
文摘An analytical solution for scattering of plane P waves by circular-arc layered alluvial valleys was derived by Fourier-Bessel series expansion technique, and the solution was utilized to analyze the effects of alluvial sequence and their relative stiffness on the scattering of incident waves.
文摘The nitrided layers mainly containing TiN dendrites were fabricated by direct current nitrogen arc melting method. The test results show that the layers are harder and more resistant to wear than the titanium substrate. Arc traveling speeds and arc currents have an effect on both the microstructures and the properties of the layers. Decreasing the arc traveling speed or increasing the arc current can obviously enhance the hardness and the wear resistance of the nitrided layers.
基金State Natural Science Foundation of China (No.59878032).
文摘An analytical solution for scattering of incident plane SV waves by a circular-arc canyon with a covering layer was derived by Fourier-Bessel series expansion technique, and the solution was utilized to analyze the effects of the covering layer on incident plane SV waves. It was shown that the covering layer in a canyon, even if it is very thin, amplifies incident plane SV waves tremendously, and the amplification can be two and half times more than that for a simple canyon; the stiffness and thickness of the covering layer also have great effects on incident plane SV waves.
基金This project is supported by the National Natural Science Foundation of China (Grant No. 59875053).
文摘The anode region of welding arc is divided into three subzones: the anode boundary layer, the presheath and the sheath. A model is established for analyzing the transport mechanism in the anode boundary layer. The computer program is designed and the governing equations of the dominating processes with the boundary conditions taken from the solutions of LTE plasmas are solved by applying the Runge-Kutta procedure. One parameter θ, the ratio of the heavy particle temperature at the free-fall edge to the anode surface temperature, is introduced into this study. The results indicate that then the parameter θ is equal to 6, the predicted heat flux at the anode surface matches the measured one. Based on the model, various plasma properties in the boundary layer can be obtained. The calculated results are in good agreement with the measurements.
基金supported by National Science and Technology Major Project(No.J2019-II-0014-0035)。
文摘Effective control of hypersonic transition is essential.In order to avoid affecting the structural proflle of the aircraft,as well as reducing power consumption and electromagnetic interference,a low-frequency surface arc plasma disturbance experiment to promote hypersonic transition was carried out in theΦ0.25 m double-throat Ludwieg tube wind tunnel at Huazhong University of Science and Technology.Contacting printed circuit board sensors and non-contact focused laser differential interferometry testing technology were used in combination.Experimental results showed that the low-frequency surface arc plasma actuation had obvious stimulation effects on the second-mode unstable wave and could promote boundary layer transition by changing the spectral characteristics of the second-mode unstable wave.At the same time,the plasma actuation could promote energy exchange between the second-mode unstable wave and other unstable waves.Finally,the corresponding control mechanism is discussed.
文摘The results of systematic numerical studies of graphene flakes growth in low-temperature arc discharge plasmas are presented. Diffusion-based growth model was developed, verified using the previously published experiments, and used to investigate the principal effects of the process parameters such as plasma density, electron temperature, surface temperature and time of growth on the size and structure of the plasma-grown graphene flakes. It was demonstrated that the higher growth temperatures result in larger graphene flakes reaching 5 μm, and simultaneously, lead to much lower density of the carbon atoms adsorbed on the flake surface. The low density of the carbon adatoms reduces the probability of the additional graphene layer nucleation on surface of growing flake, thus eventually resulting in the synthesis of the most valuable single-layered graphenes.
文摘In this work, the deposition process features of a copper coating on stainless steel substrate, using the pulse vacuum arc spraying method were researched. A continuous layer of copper was deposited on a stainless steel substrate, and a high degree of coating adhesion to the substrate was demonstrated. The thickness of coating using application time was calculated, and the surface unevenness was estimated. Inside the coating layer substrate material elements were observed, that could appear as a result of simultaneously plasma spraying on the surface of the substrate. The feature of this method was discovered, that surface plasma plays a significant role in the deposition process. Finally, it was shown that the device with a pulsed arc could effectively be used in industry, since it is possible to change the layer thickness in the range of hundreds of microns by varying the deposition time.
