To understand the source and nature of the ore-forming fluids of the Edmond hydrothermal field on the Central Indian Ridge, we studied the He-Ar isotope composition and fluid inclusions of the hydrothermal precipitate...To understand the source and nature of the ore-forming fluids of the Edmond hydrothermal field on the Central Indian Ridge, we studied the He-Ar isotope composition and fluid inclusions of the hydrothermal precipitates.Our results show that the sulfide samples contain noble gases He, Ne, Kr, and Xe with their abundances in between those of air-saturated water（ASW） and mid-ocean ridge basalt（MORB）. The ^3He/^4He ratio varies from1.3 to 8.7 Ra（n=10, average： 5.1 Ra）, whereas the ^40Ar/^36Ar ratio is from 285.3 to 314.7（n=10, average： 294.8）. These results suggest that the He was derived from a mixture of MORB with variable amounts of seawater, but the Ar in the ore-forming fluids trapped in the sulfides is predominantly derived from seawater. The fluid inclusions of barite have a wide range of homogenization temperatures and salinities varying from 163℃ to 260℃ and 2.6 wt%to 8.5 wt% Na Cl equiv., respectively. It is suggested that the ore-forming fluids were produced by phase separation, which agreed with the present-day vent fluid study.展开更多
The Longquanzhan gold deposit hosted in granitic cataclasites with mylontization of the foot wall of the main Yishui-Tangtou fault. 3He/4He ratios in fluid inclusions range from 0. 14 to 0. 24 R/Ra,close to those of t...The Longquanzhan gold deposit hosted in granitic cataclasites with mylontization of the foot wall of the main Yishui-Tangtou fault. 3He/4He ratios in fluid inclusions range from 0. 14 to 0. 24 R/Ra,close to those of the crust-source helium. 40Ar/36Ar ratios were measured to be 289-1811, slightly higher than those of atmospheric argon. The results of analysis of helium and argon isotopes suggested that ore-forming fluids were derived chiefly from the crust. The δ18O values of fluid inclusions from vein quartz range from -1.78‰ to 4.07‰, and the δD values of the fluid inclusions vary between -74‰ and -77‰. The hydrogen and oxygen isotope data indicated that the ore-forming fluid for the Longquanzhan gold deposit had mixed with meteoric water in the process of mineralization. This is consistent with the conclusion from the helium and argon isotope data.展开更多
The available studies in the literature on physical and mathematical modeling of the argon oxygen decarburization (AOD) process of stainless steel have briefly been reviewed. The latest advances made by the author wi...The available studies in the literature on physical and mathematical modeling of the argon oxygen decarburization (AOD) process of stainless steel have briefly been reviewed. The latest advances made by the author with his research group have been summarized. Water modeling was used to investigate the fluid flow and mixing characteristics in the bath of an 18 t AOD vessel, as well as the 'back attack' action of gas jets and its effects on the erosion and wear of the refractory lining, with sufficiently full kinematic similarity. The non rotating and rotating gas jets blown through two annular tuyeres, respectively of straight tube and spiral flat tube type, were employed in the experiments. The geometric similarity ratio between the model and its prototype (including the straight tube type tuyeres) was 1:3. The influences of the gas flow rate, the angle included between the two tuyeres and other operating parameters, and the suitability of the spiral tuyere as a practical application, were examined. These latest studies have clearly and successfully brought to light the fluid flow and mixing characteristics in the bath and the overall features of the back attack phenomena of gas jets during the blowing, and have offered a better understanding of the refining process. Besides, mathematical modeling for the refining process of stainless steel was carried out and a new mathematical model of the process was proposed and developed. The model performs the rate calculations of the refining and the mass and heat balances of the system. Also, the effects of the operating factors, including adding the slag materials, crop ends, and scrap, and alloy agents; the non isothermal conditions; the changes in the amounts of metal and slag during the refining; and other factors were all considered. The model was used to deal with and analyze the austenitic stainless steel making (including ultra low carbon steel) and was tested on data of 32 heats obtained in producing 304 grade steel in an 18 t AOD vessel. The changes in the bath composition and temperature during the refining process with time can be accurately predicted using this model. The model can provide some very useful information and a reliable basis for optimizing the process practice of the refining of stainless steel and control of the process in real time and online.展开更多
The dominant process in relaxation of DC glow discharge between two plane parallel electrodes in argon at pressure 200 Pa is analyzed by measuring the breakdown time delay and by analytical and numerical models. By us...The dominant process in relaxation of DC glow discharge between two plane parallel electrodes in argon at pressure 200 Pa is analyzed by measuring the breakdown time delay and by analytical and numerical models. By using the approx- imate analytical model it is found that the relaxation in a range from 20 to 60 ms in afterglow is dominated by Ar＋ ions, produced by atomic-to-molecular conversion of Ar＋ ions in the first several milliseconds after the cessation of the discharge. This conversion is confirmed by the presence of double-Gaussian distribution for the formative time delay, as well as con- version maxima in a set of memory curves measured in different conditions. Finally, the numerical one-dimensional （1D） model for determining the number densities of dominant particles in stationary DC glow discharge and two-dimensional （2D） model for the relaxation are used to confirm the previous assumptions and to determine the corresponding collision and transport coefficients of dominant species and processes.展开更多
基金The National Natural Science Foundation of China under contract No.41306056the China Ocean Mineral Resources R&D Association Project under contract No.DY125-12-R-03the Scientific Research Fund of the Second Institute of Oceanography,SOA under contract No.JG1308
文摘To understand the source and nature of the ore-forming fluids of the Edmond hydrothermal field on the Central Indian Ridge, we studied the He-Ar isotope composition and fluid inclusions of the hydrothermal precipitates.Our results show that the sulfide samples contain noble gases He, Ne, Kr, and Xe with their abundances in between those of air-saturated water（ASW） and mid-ocean ridge basalt（MORB）. The ^3He/^4He ratio varies from1.3 to 8.7 Ra（n=10, average： 5.1 Ra）, whereas the ^40Ar/^36Ar ratio is from 285.3 to 314.7（n=10, average： 294.8）. These results suggest that the He was derived from a mixture of MORB with variable amounts of seawater, but the Ar in the ore-forming fluids trapped in the sulfides is predominantly derived from seawater. The fluid inclusions of barite have a wide range of homogenization temperatures and salinities varying from 163℃ to 260℃ and 2.6 wt%to 8.5 wt% Na Cl equiv., respectively. It is suggested that the ore-forming fluids were produced by phase separation, which agreed with the present-day vent fluid study.
基金This research is jointly granted by the National Natural Science Foundation of China （Grant No. 40272088）.
文摘The Longquanzhan gold deposit hosted in granitic cataclasites with mylontization of the foot wall of the main Yishui-Tangtou fault. 3He/4He ratios in fluid inclusions range from 0. 14 to 0. 24 R/Ra,close to those of the crust-source helium. 40Ar/36Ar ratios were measured to be 289-1811, slightly higher than those of atmospheric argon. The results of analysis of helium and argon isotopes suggested that ore-forming fluids were derived chiefly from the crust. The δ18O values of fluid inclusions from vein quartz range from -1.78‰ to 4.07‰, and the δD values of the fluid inclusions vary between -74‰ and -77‰. The hydrogen and oxygen isotope data indicated that the ore-forming fluid for the Longquanzhan gold deposit had mixed with meteoric water in the process of mineralization. This is consistent with the conclusion from the helium and argon isotope data.
文摘The available studies in the literature on physical and mathematical modeling of the argon oxygen decarburization (AOD) process of stainless steel have briefly been reviewed. The latest advances made by the author with his research group have been summarized. Water modeling was used to investigate the fluid flow and mixing characteristics in the bath of an 18 t AOD vessel, as well as the 'back attack' action of gas jets and its effects on the erosion and wear of the refractory lining, with sufficiently full kinematic similarity. The non rotating and rotating gas jets blown through two annular tuyeres, respectively of straight tube and spiral flat tube type, were employed in the experiments. The geometric similarity ratio between the model and its prototype (including the straight tube type tuyeres) was 1:3. The influences of the gas flow rate, the angle included between the two tuyeres and other operating parameters, and the suitability of the spiral tuyere as a practical application, were examined. These latest studies have clearly and successfully brought to light the fluid flow and mixing characteristics in the bath and the overall features of the back attack phenomena of gas jets during the blowing, and have offered a better understanding of the refining process. Besides, mathematical modeling for the refining process of stainless steel was carried out and a new mathematical model of the process was proposed and developed. The model performs the rate calculations of the refining and the mass and heat balances of the system. Also, the effects of the operating factors, including adding the slag materials, crop ends, and scrap, and alloy agents; the non isothermal conditions; the changes in the amounts of metal and slag during the refining; and other factors were all considered. The model was used to deal with and analyze the austenitic stainless steel making (including ultra low carbon steel) and was tested on data of 32 heats obtained in producing 304 grade steel in an 18 t AOD vessel. The changes in the bath composition and temperature during the refining process with time can be accurately predicted using this model. The model can provide some very useful information and a reliable basis for optimizing the process practice of the refining of stainless steel and control of the process in real time and online.
基金supported by the Ministry of Education,Science and Technological Development of the Republic of Serbia(Grant No.ON171025)
文摘The dominant process in relaxation of DC glow discharge between two plane parallel electrodes in argon at pressure 200 Pa is analyzed by measuring the breakdown time delay and by analytical and numerical models. By using the approx- imate analytical model it is found that the relaxation in a range from 20 to 60 ms in afterglow is dominated by Ar＋ ions, produced by atomic-to-molecular conversion of Ar＋ ions in the first several milliseconds after the cessation of the discharge. This conversion is confirmed by the presence of double-Gaussian distribution for the formative time delay, as well as con- version maxima in a set of memory curves measured in different conditions. Finally, the numerical one-dimensional （1D） model for determining the number densities of dominant particles in stationary DC glow discharge and two-dimensional （2D） model for the relaxation are used to confirm the previous assumptions and to determine the corresponding collision and transport coefficients of dominant species and processes.
