Research on the expansion and fracture of explosively driven metal shells has been a key issue in weapon development and structural protection.It is important to study and predict the failure mode,fracture mechanism,a...Research on the expansion and fracture of explosively driven metal shells has been a key issue in weapon development and structural protection.It is important to study and predict the failure mode,fracture mechanism,and fragment distribution characteristics of explosively driven metal shells.In this study,we used the finite element-smoothed particle hydrodynamics(FE-SPH)adaptive method and the fluid-structure interaction method to perform a three-dimensional numerical simulation of the expansion and fracture of a metal cylindrical shell.Our method combined the advantages of the FEM and SPH,avoiding system mass loss,energy loss,and element distortion;in addition,the proposed method had a good simulation effect on the interaction between detonation waves and the cylindrical shell.The simulated detonation wave propagation,shell damage morphology,and fragment velocity distribution were in good agreement with theoretical and experimental results.We divided the fragments into three regions based on their shape characteristics.We analyzed the failure mode and formation process of fragments in different regions.The numerical results reproduced the phenomenon in which cracks initiated from the inner surface and extended to the outer surface of the cylindrical shell along the 45°or 135°shear direction.In addition,fragments composed of elements are identified,and the mass and characteristic lengths of typical fragments at a stable time are provided.Furthermore,the mass and size distribution characteristics of the fragments were explored,and the variation in the fitting results of the classical distribution function under different explosion pressures was examined.Finally,based on mathematical derivation,the distribution formula of fragment velocity was improved.The improved formula provided higher accuracy and could be used to analyze any metal cylindrical shells with different length-to-diameter ratios.展开更多
Two silkworm strains viz, B20 A (high cocoon shell ratio) and C.Nichi (low cocoon shell ratio) were sib mated for 10 generations to determine the homozygosis. Both bulked segregant analysis(BSA) and near isogenic line...Two silkworm strains viz, B20 A (high cocoon shell ratio) and C.Nichi (low cocoon shell ratio) were sib mated for 10 generations to determine the homozygosis. Both bulked segregant analysis(BSA) and near isogenic lines (NIL) studies were done to identify the RFLP markers closely linked to cocoon shell parameters. Three hundred and fifty two random clones were identified as the low copy number sequence and used for identification of Restriction Fragment Length Polymorphic (RFLP) marker linked to cocoon weight and cocoon shell character. In the bulk segregant analysis, DNA from the parents (B20 A, C.Nichi), F 1 and F 2 progeny of high shell ratio (HSR) and low shell ratio (LSR) were screened for hybridization with the random clones. Polymorphic banding pattern achieved through southern hybridization with different probes indicated the probable correlation of polymorphism with high and low cocoon shell character which are possible landmarks in identifying the putative marker(s) for the cocoon shell character. Out of the 100 probes tried with parents, F 1, F 2 and their bulks, 10 probes were found to be closely linked to cocoon shell characters.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.11872118,11627901)。
文摘Research on the expansion and fracture of explosively driven metal shells has been a key issue in weapon development and structural protection.It is important to study and predict the failure mode,fracture mechanism,and fragment distribution characteristics of explosively driven metal shells.In this study,we used the finite element-smoothed particle hydrodynamics(FE-SPH)adaptive method and the fluid-structure interaction method to perform a three-dimensional numerical simulation of the expansion and fracture of a metal cylindrical shell.Our method combined the advantages of the FEM and SPH,avoiding system mass loss,energy loss,and element distortion;in addition,the proposed method had a good simulation effect on the interaction between detonation waves and the cylindrical shell.The simulated detonation wave propagation,shell damage morphology,and fragment velocity distribution were in good agreement with theoretical and experimental results.We divided the fragments into three regions based on their shape characteristics.We analyzed the failure mode and formation process of fragments in different regions.The numerical results reproduced the phenomenon in which cracks initiated from the inner surface and extended to the outer surface of the cylindrical shell along the 45°or 135°shear direction.In addition,fragments composed of elements are identified,and the mass and characteristic lengths of typical fragments at a stable time are provided.Furthermore,the mass and size distribution characteristics of the fragments were explored,and the variation in the fitting results of the classical distribution function under different explosion pressures was examined.Finally,based on mathematical derivation,the distribution formula of fragment velocity was improved.The improved formula provided higher accuracy and could be used to analyze any metal cylindrical shells with different length-to-diameter ratios.
文摘Two silkworm strains viz, B20 A (high cocoon shell ratio) and C.Nichi (low cocoon shell ratio) were sib mated for 10 generations to determine the homozygosis. Both bulked segregant analysis(BSA) and near isogenic lines (NIL) studies were done to identify the RFLP markers closely linked to cocoon shell parameters. Three hundred and fifty two random clones were identified as the low copy number sequence and used for identification of Restriction Fragment Length Polymorphic (RFLP) marker linked to cocoon weight and cocoon shell character. In the bulk segregant analysis, DNA from the parents (B20 A, C.Nichi), F 1 and F 2 progeny of high shell ratio (HSR) and low shell ratio (LSR) were screened for hybridization with the random clones. Polymorphic banding pattern achieved through southern hybridization with different probes indicated the probable correlation of polymorphism with high and low cocoon shell character which are possible landmarks in identifying the putative marker(s) for the cocoon shell character. Out of the 100 probes tried with parents, F 1, F 2 and their bulks, 10 probes were found to be closely linked to cocoon shell characters.
