ARRAY PULSED EDDY CURRENT IMAGING SYSTEM USED TO DETECT CORROSION

A theory model is established to describe the voltage-current responsefunction. The peak amplitude and the zero-crossing time of the transient signal is extracted as theimaging features, array pulsed eddy current (PEC) imaging is proposed to detect corrosion. The testresults show that this system has the advantage of fast scanning speed, different imaging mode andquantitative detection, it has a broad application in the aviation nondestructive testing.

Wireless closed-loop deep brain stimulation using microelectrode array probes

Deep brain stimulation(DBS),including optical stimulation and electrical stimulation,has been demonstrated considerable value in exploring pathological brain activity and developing treatments for neural disorders.Advances in DBS microsystems based on implantable microelectrode array(MEA)probes have opened up new opportunities for closed-loop DBS(CL-DBS)in situ.This technology can be used to detect damaged brain circuits and test the therapeutic potential for modulating the output of these circuits in a variety of diseases simultaneously.Despite the success and rapid utilization of MEA probe-based CL-DBS microsystems,key challenges,including excessive wired communication,need to be urgently resolved.In this review,we considered recent advances in MEA probe-based wireless CL-DBS microsystems and outlined the major issues and promising prospects in this field.This technology has the potential to offer novel therapeutic options for psychiatric disorders in the future.

Inspection system for welded tubular joint based on ultrasonic phased array

A manual inspection of large-diameter tubular joints is difficult. As a result a scanner with three degrees of freedom （ DOFs） was developed based on the scanning principle of ultrasonic phased array. The weld tracing is realized by a 2DOF motion of scanner. The pose of ultrasonic probe is controlled by the third one. The control strategy is put forward based on a programmable multi-axis controller. Four kinds of scanning modes can be implemented simultaneously employing this ultrasonic inspection system. Experiments on reference blocks of tubular joints reveal that the automatic ultrasonic phased array inspection system has the same inspection accuracy as a manual ultrasonic inspection. This system is superior to the manual ultrasonic system in terms of reliability and repeatability. The artificial dejects of weld at tubular joint can be detected accurately with the presented inspection system.

Experimental Studies of Low-Pressure Plasma Jet by Means of Langmuir Probes and Emission Spectra

An investigation was made into the argon plasma jet that expanded in a low-pressure vacuum chamber. The spatial distributions of the parameters of the plasma jet with different supplied powers were measured using a ten-channel Langmuir probe array. The chemical species in the plasma jet were identified by emission spectroscopy. The electron excitation temperatures at two positions, 10 cm and 50 cm downstream from the nozzle exit were calculated, respectively, by the Boltzmann plot method.

A 57-Pin Langmuir Probe Array for Two-Dimensional Diagnosis in the Toroidal KT-5D Steady-State Plasma

In this article, the design idea of a 57-pin Langmuir probe array is presented, together with some experimental results. The manufacture technique of the probe array is discussed. Two-dimensional distributions of the plasma density, the floating potential and their fluctuations in the poloidal cross section are obtained. The blobs, which move radially and poloidally, cause great particle and energy transport. The charge neutralization by the poloidal movement of particles greatly decreases the vertical electric field in the helimak plasma. This leads to a confinement time which is two orders of magnitude larger than the theoretical prediction.

A new electromagnetic probe array diagnostic for analyzing electrostatic and magnetic fluctuations in EAST plasmas

A novel electromagnetic probe array(EMPA) diagnostic, which consists of a magnetic probe array and an electrostatic probe array, has recently been developed on EAST. The EMPA is fixed near the first wall at horizontal port P. The magnetic probe array of the EMPA consists of 24 identical magnetic probes, each of them capable of measuring toroidal, poloidal and radial magnetic fluctuations simultaneously, providing additional toroidal magnetic fluctuation measurements compared with the regular magnetic probes on EAST. With a higher sampling rate and self-resonant frequency, the EMPA magnetic probes can provide higher frequency magnetic fluctuation measurements. The magnetic probe array of the EMPA is composed of two parallel layers of magnetic probes with a radial distance of 63 mm, and each layer of magnetic probes is arranged in four poloidal rows and three toroidal columns. The compact arrangement of the EMPA magnetic probe array largely improves the toroidal mode number measurement ability from-8≤ n≤ 8 to-112≤ n≤ 112, and also improves the high poloidal wave number measurement ability of magnetic fluctuations compared with the regular high frequency magnetic probes on EAST. The electrostatic probe array of the EMPA consists of two sets of four-tip probes and a single-tip probe array with three poloidal rows and four toroidal columns. It complements the electrostatic parameter measurements behind the main limiter and near the first wall in EAST. The engineering details of the EMPA diagnostic, including the mechanical system, the electrical system, the acquisition and control system, and the effective area calibration, are presented. The preliminary applications of the EMPA in L-mode and H-mode discharges on EAST have demonstrated that the EMPA works well for providing information on the magnetic and electrostatic fluctuations and can contribute to deeper physical analysis in future EAST experiments.

Study of beam divergence and thrust vector eccentricity characteristics of the Hall thruster based on dual Faraday probe array planes and its applications

The accurate knowledge of the thrust vector eccentricity and beam divergence characteristics of Hall thrusters are of significant engineering value for the beneficial integration and successful application of Hall thrusters on spacecraft.For the characteristics of the plume bipolar diffusion due to the annular discharge channel of the Hall thruster,a Gaussian-fitted method for thrust vector deviation angle and beam divergence of Hall thrusters based on dual Faraday probe array planes was proposed in respect of the Hall thruster beam characteristics.The results show that the ratios of the deviation between the maximum and minimum values of the beam divergence angle and the thrust vector eccentricity angle using a Gaussian fit to the optimized Faraday probe dual plane to the mean value are 1.4%and 11.5%,respectively.The optimized thrust vector eccentricity angle obtained has been substantially improved,by approximately 20%.The beam divergence angle calculated using a Gaussian fitting to the optimized Faraday probe dual plane is approximately identical to the non-optimized one.The beam divergence and thrust vector eccentricity angles for different anode mass flow rates were obtained by averaging the beam divergence and thrust vector eccentricity angles calculated by the dual-plane,Gaussian-fitted ion current density method for different cross-sections.The study not only allows for an immediate and effective tool for determining the design of thrust vector adjustment mechanisms of spacecraft with different power Hall thrusters but also for characterizing the 3D spatial distribution of the Hall thruster plume.

A Simple Method of Detecting Chlamydia Trachomatis UsingEnzymatically Amplified DNA and Immobilized Probes onMicrotiter Plate

We have develoPed a simPle and economical method f0r Chlamydia trachomatisdetecting, called microtiter plate hybridization (PCR-MPH), which may replace stan-dard PCR. This method is similar to that of an ELISA. Brithe, the PCR productslabeled at the 5'termini with biotin were hybridized with probes immobilized on a mi-crotiter well, and the bound PCR products were detected by streptavidin-c0njugatedenzymes followed by color development. Two inprovements have been made in immobi-lizing the probe to the microtiter wells, in terms of increasing both immobility and hy-bridization deciency. One is that singleustranded (ss )DNA, without the complemen-tary strand, is used. The other is that instead of a single copy, a tandem array of theprobe is used for immobilization and hybridization. Using of ssDNA containing abouta 5O-rePeat array of a relevant sequence as an immobilized probe, the sensitivity in-creased 1O-fold over that of a single oligonucleotide unit. We also found that the hy-brldizatlon condltions such as time, temPerature, and solution composition could be simplthed. The advantages of this microtiter plate-hybridization method for routinepathogens detecting are a short time assay, easy processing of large numbers of sansples, and the potential for automation.

The radial self-positioning algorithm of intelligent ultrasonic probe array in oil/gas pipeline

The working principle of the pipeline intelligent pig and the structure of ultrasonic probe array used to detect defects in oil/gas pipeline are introduced. The effects of the array＇ s radial position in pipe on defect resolution are analyzed. The causes leading to radial positioning error are investigated. An algo- rithm for the radial self-positioning is presented. The experimental results show that the radial self-positioning algorithm can eliminate the array＇ s space position error effectively and improve the defect resolution.

Prediction of curved oil–water interface in horizontal pipes using modified model with dynamic contact angle

In this study,interface shapes of horizontal oil–water two-phase flow are predicted by using Young-Laplace equation model and minimum energy model.Meanwhile,the interface shapes of horizontal oil–water twophase flow in a 20 mm inner diameter pipe are measured by a novel conductance parallel-wire array probe(CPAP).It is found that,for flow conditions with low water holdup,there is a large deviation between the model-predicted interface shape and the experimentally measured one.Since the variation of pipe wetting characteristics in the process of fluid flow can lead to the changes of the contact angle between the fluid and the pipe wall,the models mentioned above are modified by considering dynamic contact angle.The results indicate that the interface shapes predicted by the modified models present a good consistence with the ones measured by CPAP.

Analyses of edge plasma characteristics in HL-2A

The edge plasma characteristics are studied by both a movable array of Much/Reynolds stress/Langmuir 10-probes in the boundary region and the fixed flush probe arrays on the 4 divertor neutralization plates at the same toroidal crosssection in the HL-2A tokamak. The dependence of the Reynolds stress on poloidal flow in the edge plasma is analysed. The result indicates that the sheared poloidal flow in tokamak plasma can be induced by the radial gradient of Reynolds stress. In the divertor experiments of HL-2A, the profiles of the electron temperature, density and floating potential on divertor plates are measured by the flush probe arrays. The edge electron temperature in divertor configuration is higher than that in limiter configuration. The temperature asymmetry between outer and inner target plates is observed. The result of magnetic surface reconstructed from 18 Mirnov coils signals is presented. Both the particle recycling and the impurity flux in the bulk plasma during divertor discharges are discussed. Neutral gas pressure in divertor chamber, measured by fast ionization gauge during divertor discharge, is given.

The study of complex focussing acoustic field of a convex phased array probe used in ultrasonic diagnostic B-scanner

This paper reports a study of complex focussing acoustic fields of a convex phased array probe widely used in ultrasonic diagnostic B-scanner. The time delay necessary for electronic focussing and for geometric focussing of complex focussing is given. By means of Helmholtz's integral formula, the expressions of acoustic fields were obtained for the electronic focussing and complex focussing.With Simpson's numerical integral, a great deal of computations was carried out with an 86 / 330 computer. By means of using different parameters, an optimum focal range and beam width of a 4 sequences electronic and complex focussing acoustic system was selected. With an EUB-40 ultrasound diagnostic B-scanner produced by the Hitachi company, the lateral focussing acoustic field and lateral resolution in an echoic tank were photographed by latticing method and the experimental result is consistent with the theory.