A 32-channel wavelength division multiplexer with 100 GHz spacing is designed and fabricated by interleaving two silicon arrayed waveguide gratings(AWGs).It has a parallel structure consisting of two silicon 16-channe...A 32-channel wavelength division multiplexer with 100 GHz spacing is designed and fabricated by interleaving two silicon arrayed waveguide gratings(AWGs).It has a parallel structure consisting of two silicon 16-channel AWGs with200 GHz spacing and a Mach-Zehnder interferometer(MZI)with 200 GHz free spectral range.The 16 channels of one silicon AWG are interleaved with those of the other AWG in spectrum,but with an identical spacing of 200 GHz.For the composed wavelength division multiplexer,the experiment results reveal 32 wavelength channels in C-band,a wavelength spacing of 100 GHz,and a channel crosstalk lower than-15 dB.展开更多
We have provided optical simulations of the evanescently coupled waveguide photodiodes integrated with a 13- channels AWGs. The photodiode could exhibit high internal efficiency by appropriate choice of layers geometr...We have provided optical simulations of the evanescently coupled waveguide photodiodes integrated with a 13- channels AWGs. The photodiode could exhibit high internal efficiency by appropriate choice of layers geometry and refrac- tive index. Aseamless joint structure has been designed and fabricated for integrating the output waveguides of AWGs with the evanescently coupled waveguide photodiode array. The highest simulation quantum efficiency could achieve 92% when the matching layer thickfiess of the PD is 120 nm and the insertion length is 2 μm. The fabricated PD with 320-nm-thick match.ing layer and 2-μm-length insertion matching layer present a responsivity of 0.87 A/W.展开更多
A 13-channel, InP-based arrayed waveguide grating (AWG) is designed and fabricated in which the on-chip loss of the central channel is about -5 dB and the crosstalk is less than -23 dB in the center of the spectrum ...A 13-channel, InP-based arrayed waveguide grating (AWG) is designed and fabricated in which the on-chip loss of the central channel is about -5 dB and the crosstalk is less than -23 dB in the center of the spectrum response. However, the central wavelength and channel spacing are deviated from the design values. To improve their accuracy, an optimized design is adopted to compensate the process error. As a result, the central wavelength 1549.9 nm and channel spacing 1.59 nm are obtained in the experiment, while their design values are 1549.32 nm and 1.6 nm, respectively. The route capability and thermo-optic characteristic of the AWG are also discussed in detail.展开更多
A four-channel 400 GHz channel spacing InP-based arrayed waveguide grating with a flattened wavelength re- sponse by employing a multimode interference coupler at the input waveguide of the filter is prepared. The fab...A four-channel 400 GHz channel spacing InP-based arrayed waveguide grating with a flattened wavelength re- sponse by employing a multimode interference coupler at the input waveguide of the filter is prepared. The fabricated devices show a flattened spectral response with a broadened 3-dB bandwidth up to 3.5 nm, interchan- nel non-uniformity of 〈0. 7dB and excellent match to the simulation results.展开更多
The silicon-based arrayed waveguide grating(AWG)is widely used due to its compact footprint and its compatibility with the mature CMOS process.However,except for AWGs with ridged waveguides of a few micrometers of cro...The silicon-based arrayed waveguide grating(AWG)is widely used due to its compact footprint and its compatibility with the mature CMOS process.However,except for AWGs with ridged waveguides of a few micrometers of cross section,any small process error will cause a large phase deviation in other AWGs,resulting in an increasing cross talk.In this paper,an ultralow cross talk AWG via a tunable microring resonator(MRR)filter is demonstrated on the SOI platform.The measured insertion loss and minimum adjacent cross talk of the designed AWG are approximately 3.2 and-45.1 d B,respectively.Compared with conventional AWG,its cross talk is greatly reduced.展开更多
In this paper, based on the principle of Arrayed Waveguide Grating (AWG)theory, some important parameters are optimized for polymer AWG around the central wavelength of1.55μm with the wavelength spacing of 1.6 nm. Th...In this paper, based on the principle of Arrayed Waveguide Grating (AWG)theory, some important parameters are optimized for polymer AWG around the central wavelength of1.55μm with the wavelength spacing of 1.6 nm. Then, a 9 X 9 polymer AWG is designed and thefabricating process are described . The cladding material is poly-methyl-methacrylate-co-glyciclylmethacrylate (PMMA-GMA) and the core material is the mixture of PMMA-GMA and bis-phonel-A epoxy. Inorder to obtain a better shape of the waveguide after the Reactive Ion Etching (RIE) using oxygen,an aluminum mask is used on polymer instead of conventional photoresist as mask in the fabricationprocess. The measuring results indicate that the fabricated optical waveguide achieves single-modetransmission.展开更多
We have characterized polarization dependent loss(PDL), differential group delay(DGD), and chromatic dispersion of an AWG and a simple method was proposed to estimate the chromatic dispersion from the measured DGD of ...We have characterized polarization dependent loss(PDL), differential group delay(DGD), and chromatic dispersion of an AWG and a simple method was proposed to estimate the chromatic dispersion from the measured DGD of the device.展开更多
Based on transmission theory, a 17 x 17 polymer arrayed waveguide grating (AWG) multiplexer para meter optimization is performed, and the influence of the fabrication results on the transmission characteristics are ...Based on transmission theory, a 17 x 17 polymer arrayed waveguide grating (AWG) multiplexer para meter optimization is performed, and the influence of the fabrication results on the transmission characteristics are analyzed. In this paper, we mainly discuss three of the main errors in the fabrication of polymer AWG devices. One is 3n 1, which is caused by the tuning of the core refractive index n 1, the second is 8b, which results from the rotating-coating of the core thickness b, and the other is the non-ideal core cross-section, which is caused by steam redissolution. The effects of the above fabrication errors on the transmission characteristics of the AWG device are investigated, and compensation techniques are proposed. By comparing the theoretical simulation and experimental results, the shift in the transmission spectrum is reduced by 0.028 nm, the 3 dB bandwidth is increased by about 0.036 nm, the insertion loss is reduced by about 3 dB for the central channel and 4.5 dB for the edge channels, and the crosstalk is reduced by 1.5 dB.展开更多
A 16 channel arrayed waveguide grating demultiplexer with 200 GHz channel spacing based on Si nanowire waveguides is designed. The transmission spectra response simulated by transmission function method shows that the...A 16 channel arrayed waveguide grating demultiplexer with 200 GHz channel spacing based on Si nanowire waveguides is designed. The transmission spectra response simulated by transmission function method shows that the device has channel spacing of 1.6 nm and crosstalk of 31 dB. The device is fabricated by 193 nm deep UV lithography in silicon-on-substrate. The demultiplexing characteristics are observed with crosstalk of 5-8 dB, central channel's insertion loss of 2.2 dB, flee spectral range of 24.7 nm and average channel spacing of 1.475 nm. The cause of the spectral distortion is analyzed specifically.展开更多
Two array waveguide grating (AWGs) based fiber ring lasers are experimentally demonstrated. Either of them achieves wavelength discrete tuning of 32 nm, or yields simultaneously lasing up to four channels with -7 dBm ...Two array waveguide grating (AWGs) based fiber ring lasers are experimentally demonstrated. Either of them achieves wavelength discrete tuning of 32 nm, or yields simultaneously lasing up to four channels with -7 dBm output power for each channel.展开更多
Arrayed waveguide grating(AWG) is a key device in the wavelength-division multiplexing(WDM) system, and the flat spectral response of the AWG device is required.In this paper,the RIE process has been improved.By u...Arrayed waveguide grating(AWG) is a key device in the wavelength-division multiplexing(WDM) system, and the flat spectral response of the AWG device is required.In this paper,the RIE process has been improved.By using the steam-redissolution technique,the insertion loss and the crosstalk have been reduced.Experimental results show that the central wavelength is 1550.86 nm,the channel spectral response flatness is about 1.5 dB,3-dB bandwidth is about 0.478 nm,insertion loss is 10.5 dB,and crosstalk is about-22 dB.The insertion loss of an AWG device is reduced by about 3 dB for the central channel and 4.5 dB for the edge channels,and the crosstalk is reduced by 2.5 dB after the steam-redissolution.展开更多
A 16-channel dual tuning wavelength division multiplexer/demultiplexer based on silicon on insulator platform is demonstrated, which is both peak wavelength tunable and output optical power tunable. The wavelength div...A 16-channel dual tuning wavelength division multiplexer/demultiplexer based on silicon on insulator platform is demonstrated, which is both peak wavelength tunable and output optical power tunable. The wavelength division multiplexer/demultiplexer consists of an arrayed waveguide grating for wavelength division multiplexing/demultiplexing, a heater for peak wavelength tuning and a variable optical attenuator based on p–i–n carrier-injection structure for optical power tuning. The experimental results show that the insertion loss on chip of the device is 3.7 dB–5.7 dB and the crosstalk is 7.5 dB–9 dB. For the tunability of the peak wavelength, 1.058-nm wavelength tunability is achieved with 271.2-mW power consumption, and the average modulation efficiency is 3.9244 nm/W; for the tunability of the optical power, the optical power equalization is achieved in all 16 channels, 20-dB attenuation is achieved with 144.07-mW power consumption,and the raise/fall time of VOA is 35 ns/42 ns.展开更多
An optical network is a type of data communication network built with optical fibre technology. It utilizes optical fibre cables as the primary communication medium for converting data and passing data as light pulses...An optical network is a type of data communication network built with optical fibre technology. It utilizes optical fibre cables as the primary communication medium for converting data and passing data as light pulses between sender and receiver nodes. The major issue in optical networking is disjoints that occur in the network. A polynomial time algorithm Wavelength Division Multiplexing-Passive Optical Networking (WDM-PON) computes disjoints of an optical network and reduces the count of disjoints that occur in the network by separating Optical Network Units (ONU) into several virtual point-to-point connections. The Arrayed Waveguide Grating (AWG) filter is included in WDM-PON to avoid the traffic in the network thereby increasing the bandwidth capacity. In case of a failure or disjoint Ant Colony Optimization (ACO) algorithm is used to find the optimized shortest path for re-routing. For enhanced security, modified Rivert Shamir Adleman (RSA) algorithm encrypts the message during communication between the nodes. The efficiency is found to be improved in terms of delay in packet delivery, longer optical reach, optimized shortest path, packet error rate.展开更多
Miniaturized fiber-Bragg-grating(FBG)interrogators are of interest for applications in the areas where weight and size controlling is important,e.g.,airplanes and aerospace or in-situ monitoring.An ultra-compact high-...Miniaturized fiber-Bragg-grating(FBG)interrogators are of interest for applications in the areas where weight and size controlling is important,e.g.,airplanes and aerospace or in-situ monitoring.An ultra-compact high-precision on-chip interrogator is proposed based on a tailored arrayed waveguide grating(AWG)on a silicon-on-insulator(SOI)platform.The on-chip interrogator enables continuous wavelength interrogation from 1544 nm to 1568 nm with the wavelength accuracy of less than 1 pm[the root-mean-square error(RMSE)is 0.73 pm]over the whole wavelength range.The chip loss is less than 5 dB.The 1×16 AWG is optimized to achieve a large bandwidth and a low noise level at each channel,and the FBG reflection peaks can be detected by multiple output channels of the AWG.The fabricated AWG is utilized to interrogate FBG sensors through the center of gravity(CoG)algorithm.The validation of an on-chip FBG interrogator that works with sub-picometer wavelength accuracy in a broad wavelength range shows large potential for applications in miniaturized fiber optic sensing systems.展开更多
We proposed an arrayed waveguide granting (AWG) based 10 Gbps full duplex wavelength division multiplexing passive optical network (WDM-PON) utiliz- ing a return-to-zero differential phase shift keying (RZ- DPSK...We proposed an arrayed waveguide granting (AWG) based 10 Gbps full duplex wavelength division multiplexing passive optical network (WDM-PON) utiliz- ing a return-to-zero differential phase shift keying (RZ- DPSK) modulation technique for down-link direction and then re-modulation of the downlink (DL) signal for the uplink (UL) direction using intensity modulation technique (OOK) with a data rate of 10 Gbps per channel. A successful cost effective colorless WDM-PON full duplex transmission operation for a data rate of 10Gbps per channel, with a channel spacing of 60 GHz over a distance of 25 km without any optical amplification and dispersion compensation is achieved within low power penalty.展开更多
基金Project supported by the National Key Research and Development Program of China(Grant No.2019YFB2203600)。
文摘A 32-channel wavelength division multiplexer with 100 GHz spacing is designed and fabricated by interleaving two silicon arrayed waveguide gratings(AWGs).It has a parallel structure consisting of two silicon 16-channel AWGs with200 GHz spacing and a Mach-Zehnder interferometer(MZI)with 200 GHz free spectral range.The 16 channels of one silicon AWG are interleaved with those of the other AWG in spectrum,but with an identical spacing of 200 GHz.For the composed wavelength division multiplexer,the experiment results reveal 32 wavelength channels in C-band,a wavelength spacing of 100 GHz,and a channel crosstalk lower than-15 dB.
基金Project supported by the National High Technology Research and Development Program of China(Grant Nos.2013AA031401,2015AA016902,and 2015AA016904)the National Natural Science Foundation of China(Grant Nos.61176053,61274069,and 61435002)the National Basic Research Program of China(Grant Nos.2012CB933503 and 2013CB932904)
文摘We have provided optical simulations of the evanescently coupled waveguide photodiodes integrated with a 13- channels AWGs. The photodiode could exhibit high internal efficiency by appropriate choice of layers geometry and refrac- tive index. Aseamless joint structure has been designed and fabricated for integrating the output waveguides of AWGs with the evanescently coupled waveguide photodiode array. The highest simulation quantum efficiency could achieve 92% when the matching layer thickfiess of the PD is 120 nm and the insertion length is 2 μm. The fabricated PD with 320-nm-thick match.ing layer and 2-μm-length insertion matching layer present a responsivity of 0.87 A/W.
基金Project supported by the National High Technology Research and Development Program of China(Grant Nos.2011AA010303 and 2013AA031401)the National Natural Science Foundation of China(Grant No.61090390)
文摘A 13-channel, InP-based arrayed waveguide grating (AWG) is designed and fabricated in which the on-chip loss of the central channel is about -5 dB and the crosstalk is less than -23 dB in the center of the spectrum response. However, the central wavelength and channel spacing are deviated from the design values. To improve their accuracy, an optimized design is adopted to compensate the process error. As a result, the central wavelength 1549.9 nm and channel spacing 1.59 nm are obtained in the experiment, while their design values are 1549.32 nm and 1.6 nm, respectively. The route capability and thermo-optic characteristic of the AWG are also discussed in detail.
基金Supported by the National Natural Science Foundation of China under Grant Nos 61274046,61201103,61335009 and61320106013the National Basic Research Program of China under Grant No 2013AA014202
文摘A four-channel 400 GHz channel spacing InP-based arrayed waveguide grating with a flattened wavelength re- sponse by employing a multimode interference coupler at the input waveguide of the filter is prepared. The fabricated devices show a flattened spectral response with a broadened 3-dB bandwidth up to 3.5 nm, interchan- nel non-uniformity of 〈0. 7dB and excellent match to the simulation results.
基金supported by the National Key Research and Development Program of China(No.2018YFB2200500)the Yunnan Provincial Foundation Program(No.202201AT070202)the National Natural Science Foundation of China(No.62065010)。
文摘The silicon-based arrayed waveguide grating(AWG)is widely used due to its compact footprint and its compatibility with the mature CMOS process.However,except for AWGs with ridged waveguides of a few micrometers of cross section,any small process error will cause a large phase deviation in other AWGs,resulting in an increasing cross talk.In this paper,an ultralow cross talk AWG via a tunable microring resonator(MRR)filter is demonstrated on the SOI platform.The measured insertion loss and minimum adjacent cross talk of the designed AWG are approximately 3.2 and-45.1 d B,respectively.Compared with conventional AWG,its cross talk is greatly reduced.
文摘In this paper, based on the principle of Arrayed Waveguide Grating (AWG)theory, some important parameters are optimized for polymer AWG around the central wavelength of1.55μm with the wavelength spacing of 1.6 nm. Then, a 9 X 9 polymer AWG is designed and thefabricating process are described . The cladding material is poly-methyl-methacrylate-co-glyciclylmethacrylate (PMMA-GMA) and the core material is the mixture of PMMA-GMA and bis-phonel-A epoxy. Inorder to obtain a better shape of the waveguide after the Reactive Ion Etching (RIE) using oxygen,an aluminum mask is used on polymer instead of conventional photoresist as mask in the fabricationprocess. The measuring results indicate that the fabricated optical waveguide achieves single-modetransmission.
文摘We have characterized polarization dependent loss(PDL), differential group delay(DGD), and chromatic dispersion of an AWG and a simple method was proposed to estimate the chromatic dispersion from the measured DGD of the device.
基金supported by the National Natural Science Foundation of China(No.11254001)the Science and Technology Development of Jilin Province of China(Nos.20110320,201201078)
文摘Based on transmission theory, a 17 x 17 polymer arrayed waveguide grating (AWG) multiplexer para meter optimization is performed, and the influence of the fabrication results on the transmission characteristics are analyzed. In this paper, we mainly discuss three of the main errors in the fabrication of polymer AWG devices. One is 3n 1, which is caused by the tuning of the core refractive index n 1, the second is 8b, which results from the rotating-coating of the core thickness b, and the other is the non-ideal core cross-section, which is caused by steam redissolution. The effects of the above fabrication errors on the transmission characteristics of the AWG device are investigated, and compensation techniques are proposed. By comparing the theoretical simulation and experimental results, the shift in the transmission spectrum is reduced by 0.028 nm, the 3 dB bandwidth is increased by about 0.036 nm, the insertion loss is reduced by about 3 dB for the central channel and 4.5 dB for the edge channels, and the crosstalk is reduced by 1.5 dB.
基金Project supported by the National High Technology Research and Development Program of China(No.2006AA03Z420)the National Natural Science Foundation of China(Nos.60776057,60837001,60776057)
文摘A 16 channel arrayed waveguide grating demultiplexer with 200 GHz channel spacing based on Si nanowire waveguides is designed. The transmission spectra response simulated by transmission function method shows that the device has channel spacing of 1.6 nm and crosstalk of 31 dB. The device is fabricated by 193 nm deep UV lithography in silicon-on-substrate. The demultiplexing characteristics are observed with crosstalk of 5-8 dB, central channel's insertion loss of 2.2 dB, flee spectral range of 24.7 nm and average channel spacing of 1.475 nm. The cause of the spectral distortion is analyzed specifically.
文摘Two array waveguide grating (AWGs) based fiber ring lasers are experimentally demonstrated. Either of them achieves wavelength discrete tuning of 32 nm, or yields simultaneously lasing up to four channels with -7 dBm output power for each channel.
基金Project supported by the National Natural Science Foundation of China(No.60576045).
文摘Arrayed waveguide grating(AWG) is a key device in the wavelength-division multiplexing(WDM) system, and the flat spectral response of the AWG device is required.In this paper,the RIE process has been improved.By using the steam-redissolution technique,the insertion loss and the crosstalk have been reduced.Experimental results show that the central wavelength is 1550.86 nm,the channel spectral response flatness is about 1.5 dB,3-dB bandwidth is about 0.478 nm,insertion loss is 10.5 dB,and crosstalk is about-22 dB.The insertion loss of an AWG device is reduced by about 3 dB for the central channel and 4.5 dB for the edge channels,and the crosstalk is reduced by 2.5 dB after the steam-redissolution.
基金Project supported by the National Key Research and Development Program of China(Grant No.2016YFB0402504)the National Nature Science Foundation of China(Grant No.61435013)
文摘A 16-channel dual tuning wavelength division multiplexer/demultiplexer based on silicon on insulator platform is demonstrated, which is both peak wavelength tunable and output optical power tunable. The wavelength division multiplexer/demultiplexer consists of an arrayed waveguide grating for wavelength division multiplexing/demultiplexing, a heater for peak wavelength tuning and a variable optical attenuator based on p–i–n carrier-injection structure for optical power tuning. The experimental results show that the insertion loss on chip of the device is 3.7 dB–5.7 dB and the crosstalk is 7.5 dB–9 dB. For the tunability of the peak wavelength, 1.058-nm wavelength tunability is achieved with 271.2-mW power consumption, and the average modulation efficiency is 3.9244 nm/W; for the tunability of the optical power, the optical power equalization is achieved in all 16 channels, 20-dB attenuation is achieved with 144.07-mW power consumption,and the raise/fall time of VOA is 35 ns/42 ns.
文摘An optical network is a type of data communication network built with optical fibre technology. It utilizes optical fibre cables as the primary communication medium for converting data and passing data as light pulses between sender and receiver nodes. The major issue in optical networking is disjoints that occur in the network. A polynomial time algorithm Wavelength Division Multiplexing-Passive Optical Networking (WDM-PON) computes disjoints of an optical network and reduces the count of disjoints that occur in the network by separating Optical Network Units (ONU) into several virtual point-to-point connections. The Arrayed Waveguide Grating (AWG) filter is included in WDM-PON to avoid the traffic in the network thereby increasing the bandwidth capacity. In case of a failure or disjoint Ant Colony Optimization (ACO) algorithm is used to find the optimized shortest path for re-routing. For enhanced security, modified Rivert Shamir Adleman (RSA) algorithm encrypts the message during communication between the nodes. The efficiency is found to be improved in terms of delay in packet delivery, longer optical reach, optimized shortest path, packet error rate.
基金This work wasssupported by the National Natural Science Foundation of China(Grant Nos.62020106002 and 61735017)Innovation Project of Zhejiang Laboratory(Grant No.2021MG0AL01)+2 种基金the Youth Foundation of Zhejiang Laboratory(Grant No.2020MC0AA08)Major Scientific Research Project of Zhejiang Laboratory(Grant No.2019MC0AD02)National Key Basic Research Program of China(Grant No.2021YFC2401403).
文摘Miniaturized fiber-Bragg-grating(FBG)interrogators are of interest for applications in the areas where weight and size controlling is important,e.g.,airplanes and aerospace or in-situ monitoring.An ultra-compact high-precision on-chip interrogator is proposed based on a tailored arrayed waveguide grating(AWG)on a silicon-on-insulator(SOI)platform.The on-chip interrogator enables continuous wavelength interrogation from 1544 nm to 1568 nm with the wavelength accuracy of less than 1 pm[the root-mean-square error(RMSE)is 0.73 pm]over the whole wavelength range.The chip loss is less than 5 dB.The 1×16 AWG is optimized to achieve a large bandwidth and a low noise level at each channel,and the FBG reflection peaks can be detected by multiple output channels of the AWG.The fabricated AWG is utilized to interrogate FBG sensors through the center of gravity(CoG)algorithm.The validation of an on-chip FBG interrogator that works with sub-picometer wavelength accuracy in a broad wavelength range shows large potential for applications in miniaturized fiber optic sensing systems.
文摘We proposed an arrayed waveguide granting (AWG) based 10 Gbps full duplex wavelength division multiplexing passive optical network (WDM-PON) utiliz- ing a return-to-zero differential phase shift keying (RZ- DPSK) modulation technique for down-link direction and then re-modulation of the downlink (DL) signal for the uplink (UL) direction using intensity modulation technique (OOK) with a data rate of 10 Gbps per channel. A successful cost effective colorless WDM-PON full duplex transmission operation for a data rate of 10Gbps per channel, with a channel spacing of 60 GHz over a distance of 25 km without any optical amplification and dispersion compensation is achieved within low power penalty.