The Tianma 65 m radio telescope(TMRT)at Shanghai is a fully steerable single-dish radio telescope in China,operating at centimeter to millimeter wavelengths(1.25 GHz to 50 GHz).This paper presents details on the main ...The Tianma 65 m radio telescope(TMRT)at Shanghai is a fully steerable single-dish radio telescope in China,operating at centimeter to millimeter wavelengths(1.25 GHz to 50 GHz).This paper presents details on the main specifications,design,performance analysis,testing,and construction of the telescope antenna.The measured total efficiency is better than 50%over the whole elevation angle range,first sidelobe levels are less than−20 dB,antenna system noise temperatures are less than 70 K at 30°elevation angle,and pointing accuracy is less than 3″.The measured and calculated results are in good agreement,verifying the effectiveness of the design and analysis.展开更多
An offset elliptical reflector antenna suitable for satellite application was designed and investigated when it was fed by a rectangular horn partially filled.with a dielectric..The.reflector antenna exhibits high gai...An offset elliptical reflector antenna suitable for satellite application was designed and investigated when it was fed by a rectangular horn partially filled.with a dielectric..The.reflector antenna exhibits high gain, low cross polarization. low sidelines and an elliptical beam. Al- though this study has been carried out in view of possible satellite applications, it is clear that this. antenna. is also suitable for use in radar antennas.展开更多
Space-deployable mechanisms can be used as supporting structures for large-diameter antennas in space engineering.This study proposes a novel method for constructing the surface design of space reflector antennas base...Space-deployable mechanisms can be used as supporting structures for large-diameter antennas in space engineering.This study proposes a novel method for constructing the surface design of space reflector antennas based on polar scissor units.The concurrency and deployability equations of the space scissor unit with definite surface constraints are derived using the rod and vector methods.Constraint equations of the spatial transformation for space n-edge polar scissor units are summarized.A new closed-loop deployable structure,called the polar scissor deployable antenna(PSDA),is designed by combining planar polar scissor units with spatial polar scissor units.The overconstrained problem is solved by releasing the curve constraint that locates at the end-point of the planar scissor mechanism.Kinematics simulation and error analysis are performed.The results show that the PSDA can effectively fit the paraboloid of revolution.Finally,deployment experiments verify the validity and feasibility of the proposed design method,which provides a new idea for the construction of large space-reflector antennas.展开更多
Large reflector antennas are widely used in radars, satellite communication, radio astronomy, and so on. The rapid developments in these fields have created demands for development of better performance and higher sur...Large reflector antennas are widely used in radars, satellite communication, radio astronomy, and so on. The rapid developments in these fields have created demands for development of better performance and higher surface accuracy. However, low accuracy and low effi- ciency are the common disadvantages for traditional panel alignment and adjustment. In order to improve the surface accuracy of large reflector antenna, a new method is pre- sented to determinate panel adjustment values from far field pattern. Based on the method of Physical Optics (PO), the effect of panel facet displacement on radiation field value is derived. Then the linear system is constructed between panel adjustment vector and far field pattern. Using the method of Singular Value Decomposition (SVD), the adjustment value for all panel adjustors are obtained by solving the linear equations. An experiment is conducted on a 3.7 m reflector antenna with 12 segmented panels. The results of simulation and test are similar, which shows that the presented method is feasible. Moreover, thediscussion about validation shows that the method can be used for many cases of reflector shape. The proposed research provides the instruction to adjust surface panels efficiently and accurately.展开更多
The main surface of a large Cassegrain antenna consists of a large number of panels. There are inevitably random and systematic errors which will degrade the antenna pattern and limit its applicability when working at...The main surface of a large Cassegrain antenna consists of a large number of panels. There are inevitably random and systematic errors which will degrade the antenna pattern and limit its applicability when working at high frequencies. Correcting the subreflector surface is difficult to describe by a global expansion effectively with a small amount of data. This paper presents a simple and clear way for correcting the subreflector surface of a large Cassegrain antenna for achieving such compensation. The advantage of the method is that the geometrical optics (GO) analysis is extremely simplified by the concept of equivalent prime-focus paraboloid, and corrected deformations of the subreflector surface are determined by simple formulas which represent the relationship between distortions of the subreflector surface and phase of the main surface current. The final shape of the subreflector surface is represented by a B-spline surface. To obtain a satisfactory antenna pattern with the simplest subreflector surface, the optimal number of B-spline patches are searched by particle swarm optimization (PSO). The shaping process is verified by compensating a 22-m Cassegrain antenna whose main reflector has 96 panels. The results are satisfactory and demonstrate the simplicity and effectiveness of the approach.展开更多
The design of the Qitai 110 m Radio Telescope(QTT) with large aperture and very high working frequency(115 GHz) was investigated in Xinjiang, China. The results lead to a main reflector with high surface precision...The design of the Qitai 110 m Radio Telescope(QTT) with large aperture and very high working frequency(115 GHz) was investigated in Xinjiang, China. The results lead to a main reflector with high surface precision and high pointing precision. In this paper, the properties of active surface adjustment in a deformed parabolic reflector antenna are analyzed. To assure the performance of large reflector antennas such as gain and boresight, which can be obtained by utilizing an electromechanical coupling model, and satisfy them simultaneously, research on active surface adjustment applied to a new parabolic reflector as target surface has been done. Based on the initial position of actuators and the relationship between adjustment points and target points, a novel mathematical model and a program thatdirectly calculates the movements of actuators have been developed for guiding the active surface adjustment of large reflector antennas. This adjustment method is applied to an 8 m reflector antenna,in which we only consider gravity deformation. The results show that this method is more efficient in adjusting the surface and improving the working performance.展开更多
In this paper,a high gain and directional coplanarwaveguide(CPW)-fed ultra-wideband(UWB)planar antenna with a new frequency selective surface(FSS)unit cells design is proposed for UWB applications.The proposed UWB ant...In this paper,a high gain and directional coplanarwaveguide(CPW)-fed ultra-wideband(UWB)planar antenna with a new frequency selective surface(FSS)unit cells design is proposed for UWB applications.The proposed UWB antenna was designed based on the Mercedes artistic-shaped planar(MAP)antenna.The antenna consisted of a circular ring embedded with three straight legs for antenna impedance bandwidth improvement.The modelled FSS used the integration of a two parallel conductive metallic patch with a circular loop structure.The FSS provided a UWB stopband filter response covering a bandwidth of 10.5 GHz,for frequencies from 2.2 to 12.7 GHz.The proposed FSS had a compact physical dimension of 5 mm×5 mm×1.6 mm,with a printed array of 19×19 FSS unit cells.The FSS unit cells were printed on only one side of the dielectric FR4 substrate and placed as a sandwich between the antenna and the reflector ground plane.An equivalent circuit configuration(ECC)was used to verify the FSS unit cell structure’s performance.The simulated results indicated that the UWB MAP antenna and FSS reflector provided a fractional bandwidth of 136%and a high gain of 11.5 dB at 8.5 GHz with an acceptable radiation efficiency of 89%.Furthermore,the gain was improved across the operating band and kept between 8.3 and 11.5 dB.The proposed antenna was in good agreement between theoretical and experimental results and offered a wide enough bandwidth for UWB and vehicle applications.展开更多
Aiming at the problem of the surface accuracy and electrical performance of the antenna in space environment are reduced due to thermal deformation caused by temperature load. This paper presents a method to compensat...Aiming at the problem of the surface accuracy and electrical performance of the antenna in space environment are reduced due to thermal deformation caused by temperature load. This paper presents a method to compensate the thermally induced shape distortion of antenna reflector by actively adjusting actuators in order to improve the electrical performance. The adjustment of each actuator is related to the local deformation of the panel. Then, taking a space deployable antenna with a diameter of 5 meters as an example, the finite element model is established. According to the range of the temperature variation in space (<span style="white-space:nowrap;">−</span>180<span style="white-space:nowrap;">°</span>C - 200<span style="white-space:nowrap;">°</span>C), different temperature loads are applied to the antenna. The variation of electrical properties and surface accuracy is analyzed and the worst working condition is determined, and the antenna is compensated based on this condition. Then, four different electrical performance parameters are used as the optimization objectives, and the electromechanical coupling optimization model is established, and the PSO algorithm is used to optimize the actuators adjustments. The results show that the method can effectively improve the electrical performance of the deformed reflector antenna.展开更多
In order to overcome the shortcoming of space-borne rigid antenna reflector made of carbon fiber reinforced plastic(CFRP)skins with aluminum honeycomb sandwich(SAHS)structure,a new type of full CFRP skin plus rib(SPR)...In order to overcome the shortcoming of space-borne rigid antenna reflector made of carbon fiber reinforced plastic(CFRP)skins with aluminum honeycomb sandwich(SAHS)structure,a new type of full CFRP skin plus rib(SPR)structure ring-focused parabolic surface antenna reflector with the size of 2.5 m×1.9 m is designed.Under the condition that the original caliber,surface type,and interface remain unchanged,the main influence factors are designed and controlled.First,from the perspective of high stiffness,lightweight,and easy to form,a finite element simulation software is used to analyze and optimize the layout of the rib,the cross-sectional shape of the rib,the size of the rib,and the matching of the size and the coefficients of thermal expansion(CTEs)of the rib and the skin.Second,two structures are prepared by the autoclave molding process.Third,the weight and the surface precision root mean square(RMS)value are measured.The results show that the fundamental frequency of the SPR structure is 142.2 Hz,which is 3.5 Hz higher;the number of the new structural parts is reduced by 40%,and the forming process is greatly simplified.The total weight of the new structure is 11.9 kg,lighter 42.5%,indicating that the weight loss is obvious.The RMS value is 0.15 mm,which is slightly lower 0.01 mm but satisfies the accuracy requirement not greater than 0.3 mm.It is proved that the SPR structure reflector is a superior structure of the lightweight spaceborne antenna reflector.展开更多
A gradient-based optimization method for producing a contoured beam by using a single-fed reflector antenna is presented. First, a quick and accurate pattern approximation formula based on physical optics(PO) is adopt...A gradient-based optimization method for producing a contoured beam by using a single-fed reflector antenna is presented. First, a quick and accurate pattern approximation formula based on physical optics(PO) is adopted to calculate the gradients of the directivity with respect to reflector's nodal displacements. Because the approximation formula is a linear function of nodal displacements, the gradient can be easily derived. Then, the method of the steepest descent is adopted, and an optimization iteration procedure is proposed. The iteration procedure includes two loops: an inner loop and an outer loop. In the inner loop, the gradient and pattern are calculated by matrix operation, which is very fast by using the pre-calculated data in the outer loop. In the outer loop, the ideal terms used in the inner loop to calculate the gradient and pattern are updated, and the real pattern is calculated by the PO method. Due to the high approximation accuracy, when the outer loop is performed once, the inner loop can be performed many times, which will save much time because the integration is replaced by matrix operation. In the end, a contoured beam covering the continental United States(CONUS) is designed, and simulation results show the effectiveness of the proposed algorithm.展开更多
Based on the works of Greve and Rahmat-Samii, theelectromagnetic (EM) performance of the reflector antenna withnon-uniform surface errors along radius is further addressed. Amathematical model is developed to descri...Based on the works of Greve and Rahmat-Samii, theelectromagnetic (EM) performance of the reflector antenna withnon-uniform surface errors along radius is further addressed. Amathematical model is developed to describe the weighting functionfor the non-uniform surface errors along radius. Then, somediscussions on the peak gain loss (PGL) and the first sidelobelevel increase (SLLI) caused by the non-uniform surface errors arepresented and several significant radiation characteristics of thereflector with non-uniform errors are pointed out. Last, based onthe proposed model, the weighted root mean square (RMS) valueof the surface errors is produced to evaluate the EM performanceand several representative cases with different non-uniform errorsare presented with good results. Results show that the weightedRMS value should be taken into account for a better quality evaluationof the reflector surface.展开更多
The structure of the antenna which will be used in HT-7 tokamak electron cyclotron resonance heating (ECRH) experiment and the design of its key component (the elliptical reflector) were introduced. A quasi-Gaussian T...The structure of the antenna which will be used in HT-7 tokamak electron cyclotron resonance heating (ECRH) experiment and the design of its key component (the elliptical reflector) were introduced. A quasi-Gaussian TE11 wave sent from the TE01-TE11 mode converter was reflected by two mirrors from the waveguide aperture to the plasma center area. One of the two mirrors is a plane mirror and the other is an elliptical mirror. In this process, the wave beam will be converged by the two reflecting mirrors and the emissive direction of the wave is also controlled by them. As requested physically for ECRH experiment, the arrangement of the two mirrors can ensure the wave to be launched from the low-field side of the tour.展开更多
The radiation characteristics of a doubly curved shaped reflector antenna with random holes is analyzed by physical optics (PO) method, and the probability model of the random holes and its numerical realization metho...The radiation characteristics of a doubly curved shaped reflector antenna with random holes is analyzed by physical optics (PO) method, and the probability model of the random holes and its numerical realization method are presented. The radiation patterns show that in the azimuth plane the peak sidelobe level becomes much higher as the reflector surface with random holes. The simulation results can provide a theoretical guidance for the radar attackers.展开更多
A design method of a new shaped spherical reflector antenna with a horn feed for wide-angle scanning is presented,in which the horn's phase center need not be found out and its optimal position can be determined.I...A design method of a new shaped spherical reflector antenna with a horn feed for wide-angle scanning is presented,in which the horn's phase center need not be found out and its optimal position can be determined.It is found from numerical calculation that the shaped spherical reflector antenna has better electrical performance than that of the spherical reflector antenna,at the maximum gain value under the conditions of the same feed and reflector aperture,and can be used as a wide angle searching antenna.展开更多
An user-oriented computer software consisting of three modeling codes, named DRAD, DRAA and FDPAT, is introduced. It can be used to design three types of Cassegrain system: classical, with shaped subreflector and with...An user-oriented computer software consisting of three modeling codes, named DRAD, DRAA and FDPAT, is introduced. It can be used to design three types of Cassegrain system: classical, with shaped subreflector and with dual shaped reflectors, and to analyse radiation patterns for the antennas. Several mathematical models and numerical techniques are presented.展开更多
文摘The Tianma 65 m radio telescope(TMRT)at Shanghai is a fully steerable single-dish radio telescope in China,operating at centimeter to millimeter wavelengths(1.25 GHz to 50 GHz).This paper presents details on the main specifications,design,performance analysis,testing,and construction of the telescope antenna.The measured total efficiency is better than 50%over the whole elevation angle range,first sidelobe levels are less than−20 dB,antenna system noise temperatures are less than 70 K at 30°elevation angle,and pointing accuracy is less than 3″.The measured and calculated results are in good agreement,verifying the effectiveness of the design and analysis.
文摘An offset elliptical reflector antenna suitable for satellite application was designed and investigated when it was fed by a rectangular horn partially filled.with a dielectric..The.reflector antenna exhibits high gain, low cross polarization. low sidelines and an elliptical beam. Al- though this study has been carried out in view of possible satellite applications, it is clear that this. antenna. is also suitable for use in radar antennas.
基金Supported by National Key R&D Program of China(Grant No.2018YFB1304600)National Natural Science Foundation of China(Grant No.51775541)+1 种基金CAS Interdisciplinary Innovation Team of China(Grant No.JCTD-2018-11)Hundred-Talent Program(Chinese Academy of Sciences)(Grant No.Y8A3210304).
文摘Space-deployable mechanisms can be used as supporting structures for large-diameter antennas in space engineering.This study proposes a novel method for constructing the surface design of space reflector antennas based on polar scissor units.The concurrency and deployability equations of the space scissor unit with definite surface constraints are derived using the rod and vector methods.Constraint equations of the spatial transformation for space n-edge polar scissor units are summarized.A new closed-loop deployable structure,called the polar scissor deployable antenna(PSDA),is designed by combining planar polar scissor units with spatial polar scissor units.The overconstrained problem is solved by releasing the curve constraint that locates at the end-point of the planar scissor mechanism.Kinematics simulation and error analysis are performed.The results show that the PSDA can effectively fit the paraboloid of revolution.Finally,deployment experiments verify the validity and feasibility of the proposed design method,which provides a new idea for the construction of large space-reflector antennas.
基金Supported by National Natural Science Foundation of China(Grant Nos.51490661,51490660,51205301)National Key Basic Research Program of China(973 Program,Grant No.2015CB857100)Special Funding for Key Laboratory of Xinjiang Uygur Autonomous Region,China(Grant No.2014KL012)
文摘Large reflector antennas are widely used in radars, satellite communication, radio astronomy, and so on. The rapid developments in these fields have created demands for development of better performance and higher surface accuracy. However, low accuracy and low effi- ciency are the common disadvantages for traditional panel alignment and adjustment. In order to improve the surface accuracy of large reflector antenna, a new method is pre- sented to determinate panel adjustment values from far field pattern. Based on the method of Physical Optics (PO), the effect of panel facet displacement on radiation field value is derived. Then the linear system is constructed between panel adjustment vector and far field pattern. Using the method of Singular Value Decomposition (SVD), the adjustment value for all panel adjustors are obtained by solving the linear equations. An experiment is conducted on a 3.7 m reflector antenna with 12 segmented panels. The results of simulation and test are similar, which shows that the presented method is feasible. Moreover, thediscussion about validation shows that the method can be used for many cases of reflector shape. The proposed research provides the instruction to adjust surface panels efficiently and accurately.
基金supported by the National 973 Program(No.2015CB857100)the National Natural Science Foundation of China(Grant Nos.51522507 and 51475349)+3 种基金Youth Science and Technology Star Project of Shaanxi Province(No.2016KJXX-06)the Natural Science Basic Research Plan in Shaanxi Province(No.2016JQ5072)the Fundamental Research Funds for the Central Universitiesthe Innovation Fund of Xidian University
文摘The main surface of a large Cassegrain antenna consists of a large number of panels. There are inevitably random and systematic errors which will degrade the antenna pattern and limit its applicability when working at high frequencies. Correcting the subreflector surface is difficult to describe by a global expansion effectively with a small amount of data. This paper presents a simple and clear way for correcting the subreflector surface of a large Cassegrain antenna for achieving such compensation. The advantage of the method is that the geometrical optics (GO) analysis is extremely simplified by the concept of equivalent prime-focus paraboloid, and corrected deformations of the subreflector surface are determined by simple formulas which represent the relationship between distortions of the subreflector surface and phase of the main surface current. The final shape of the subreflector surface is represented by a B-spline surface. To obtain a satisfactory antenna pattern with the simplest subreflector surface, the optimal number of B-spline patches are searched by particle swarm optimization (PSO). The shaping process is verified by compensating a 22-m Cassegrain antenna whose main reflector has 96 panels. The results are satisfactory and demonstrate the simplicity and effectiveness of the approach.
基金supported by the National Basic Research Program of China(973 Program)(Grant No.2015CB857100)the National Natural Science Foundation of China(Grant Nos.51522507,51475349 and 51490660)+1 种基金the Youth Science and Technology Star Project of Shaanxi Province(Grant No.2016KJXX-06)the National 111 Project(Grant No.B14042)
文摘The design of the Qitai 110 m Radio Telescope(QTT) with large aperture and very high working frequency(115 GHz) was investigated in Xinjiang, China. The results lead to a main reflector with high surface precision and high pointing precision. In this paper, the properties of active surface adjustment in a deformed parabolic reflector antenna are analyzed. To assure the performance of large reflector antennas such as gain and boresight, which can be obtained by utilizing an electromechanical coupling model, and satisfy them simultaneously, research on active surface adjustment applied to a new parabolic reflector as target surface has been done. Based on the initial position of actuators and the relationship between adjustment points and target points, a novel mathematical model and a program thatdirectly calculates the movements of actuators have been developed for guiding the active surface adjustment of large reflector antennas. This adjustment method is applied to an 8 m reflector antenna,in which we only consider gravity deformation. The results show that this method is more efficient in adjusting the surface and improving the working performance.
基金We would like to thanks to Ministry of Higher Education and UTeM through FRGS Grant F00430 FRGS/1/2020/FKEKK-CETRI/F00430 that support this research.
文摘In this paper,a high gain and directional coplanarwaveguide(CPW)-fed ultra-wideband(UWB)planar antenna with a new frequency selective surface(FSS)unit cells design is proposed for UWB applications.The proposed UWB antenna was designed based on the Mercedes artistic-shaped planar(MAP)antenna.The antenna consisted of a circular ring embedded with three straight legs for antenna impedance bandwidth improvement.The modelled FSS used the integration of a two parallel conductive metallic patch with a circular loop structure.The FSS provided a UWB stopband filter response covering a bandwidth of 10.5 GHz,for frequencies from 2.2 to 12.7 GHz.The proposed FSS had a compact physical dimension of 5 mm×5 mm×1.6 mm,with a printed array of 19×19 FSS unit cells.The FSS unit cells were printed on only one side of the dielectric FR4 substrate and placed as a sandwich between the antenna and the reflector ground plane.An equivalent circuit configuration(ECC)was used to verify the FSS unit cell structure’s performance.The simulated results indicated that the UWB MAP antenna and FSS reflector provided a fractional bandwidth of 136%and a high gain of 11.5 dB at 8.5 GHz with an acceptable radiation efficiency of 89%.Furthermore,the gain was improved across the operating band and kept between 8.3 and 11.5 dB.The proposed antenna was in good agreement between theoretical and experimental results and offered a wide enough bandwidth for UWB and vehicle applications.
文摘Aiming at the problem of the surface accuracy and electrical performance of the antenna in space environment are reduced due to thermal deformation caused by temperature load. This paper presents a method to compensate the thermally induced shape distortion of antenna reflector by actively adjusting actuators in order to improve the electrical performance. The adjustment of each actuator is related to the local deformation of the panel. Then, taking a space deployable antenna with a diameter of 5 meters as an example, the finite element model is established. According to the range of the temperature variation in space (<span style="white-space:nowrap;">−</span>180<span style="white-space:nowrap;">°</span>C - 200<span style="white-space:nowrap;">°</span>C), different temperature loads are applied to the antenna. The variation of electrical properties and surface accuracy is analyzed and the worst working condition is determined, and the antenna is compensated based on this condition. Then, four different electrical performance parameters are used as the optimization objectives, and the electromechanical coupling optimization model is established, and the PSO algorithm is used to optimize the actuators adjustments. The results show that the method can effectively improve the electrical performance of the deformed reflector antenna.
文摘In order to overcome the shortcoming of space-borne rigid antenna reflector made of carbon fiber reinforced plastic(CFRP)skins with aluminum honeycomb sandwich(SAHS)structure,a new type of full CFRP skin plus rib(SPR)structure ring-focused parabolic surface antenna reflector with the size of 2.5 m×1.9 m is designed.Under the condition that the original caliber,surface type,and interface remain unchanged,the main influence factors are designed and controlled.First,from the perspective of high stiffness,lightweight,and easy to form,a finite element simulation software is used to analyze and optimize the layout of the rib,the cross-sectional shape of the rib,the size of the rib,and the matching of the size and the coefficients of thermal expansion(CTEs)of the rib and the skin.Second,two structures are prepared by the autoclave molding process.Third,the weight and the surface precision root mean square(RMS)value are measured.The results show that the fundamental frequency of the SPR structure is 142.2 Hz,which is 3.5 Hz higher;the number of the new structural parts is reduced by 40%,and the forming process is greatly simplified.The total weight of the new structure is 11.9 kg,lighter 42.5%,indicating that the weight loss is obvious.The RMS value is 0.15 mm,which is slightly lower 0.01 mm but satisfies the accuracy requirement not greater than 0.3 mm.It is proved that the SPR structure reflector is a superior structure of the lightweight spaceborne antenna reflector.
基金supported by the National Natural Science Foundation of China(51805399)the Fundamental Research Funds for the Central Universities(JB180403)+2 种基金the Chinese Academy of Sciences(CAS)"Light of West China" Program(2017-XBQNXZ-B-024)the National Basic Research Program of China(973 Program)(2015CB857100)the Operation,Maintenance and Upgrading Fund for Astronomical Telescopes and Facility Instruments,budgeted from the Ministry of Finance of China(MOF)and administrated by the CAS
文摘A gradient-based optimization method for producing a contoured beam by using a single-fed reflector antenna is presented. First, a quick and accurate pattern approximation formula based on physical optics(PO) is adopted to calculate the gradients of the directivity with respect to reflector's nodal displacements. Because the approximation formula is a linear function of nodal displacements, the gradient can be easily derived. Then, the method of the steepest descent is adopted, and an optimization iteration procedure is proposed. The iteration procedure includes two loops: an inner loop and an outer loop. In the inner loop, the gradient and pattern are calculated by matrix operation, which is very fast by using the pre-calculated data in the outer loop. In the outer loop, the ideal terms used in the inner loop to calculate the gradient and pattern are updated, and the real pattern is calculated by the PO method. Due to the high approximation accuracy, when the outer loop is performed once, the inner loop can be performed many times, which will save much time because the integration is replaced by matrix operation. In the end, a contoured beam covering the continental United States(CONUS) is designed, and simulation results show the effectiveness of the proposed algorithm.
基金supported by the National Basic Research Program of China(973 Program)(2015CB857100)the Foundation for Key Laboratory of Xinjiang Uygur Autonomous Region(2014KL012)+2 种基金the National Natural Science Foundation of China(514906605147534951522507)
文摘Based on the works of Greve and Rahmat-Samii, theelectromagnetic (EM) performance of the reflector antenna withnon-uniform surface errors along radius is further addressed. Amathematical model is developed to describe the weighting functionfor the non-uniform surface errors along radius. Then, somediscussions on the peak gain loss (PGL) and the first sidelobelevel increase (SLLI) caused by the non-uniform surface errors arepresented and several significant radiation characteristics of thereflector with non-uniform errors are pointed out. Last, based onthe proposed model, the weighted root mean square (RMS) valueof the surface errors is produced to evaluate the EM performanceand several representative cases with different non-uniform errorsare presented with good results. Results show that the weightedRMS value should be taken into account for a better quality evaluationof the reflector surface.
基金This work was supported by Meg-Science Engineering Item of the Chinese Academy of Sciences.
文摘The structure of the antenna which will be used in HT-7 tokamak electron cyclotron resonance heating (ECRH) experiment and the design of its key component (the elliptical reflector) were introduced. A quasi-Gaussian TE11 wave sent from the TE01-TE11 mode converter was reflected by two mirrors from the waveguide aperture to the plasma center area. One of the two mirrors is a plane mirror and the other is an elliptical mirror. In this process, the wave beam will be converged by the two reflecting mirrors and the emissive direction of the wave is also controlled by them. As requested physically for ECRH experiment, the arrangement of the two mirrors can ensure the wave to be launched from the low-field side of the tour.
文摘The radiation characteristics of a doubly curved shaped reflector antenna with random holes is analyzed by physical optics (PO) method, and the probability model of the random holes and its numerical realization method are presented. The radiation patterns show that in the azimuth plane the peak sidelobe level becomes much higher as the reflector surface with random holes. The simulation results can provide a theoretical guidance for the radar attackers.
文摘A design method of a new shaped spherical reflector antenna with a horn feed for wide-angle scanning is presented,in which the horn's phase center need not be found out and its optimal position can be determined.It is found from numerical calculation that the shaped spherical reflector antenna has better electrical performance than that of the spherical reflector antenna,at the maximum gain value under the conditions of the same feed and reflector aperture,and can be used as a wide angle searching antenna.
文摘An user-oriented computer software consisting of three modeling codes, named DRAD, DRAA and FDPAT, is introduced. It can be used to design three types of Cassegrain system: classical, with shaped subreflector and with dual shaped reflectors, and to analyse radiation patterns for the antennas. Several mathematical models and numerical techniques are presented.