Real-time arrival picking of rock microfracture signals based on convolutional-recurrent neural network and its engineering application

Accurately picking P-and S-wave arrivals of microseismic(MS)signals in real-time directly influences the early warning of rock mass failure.A common contradiction between accuracy and computation exists in the current arrival picking methods.Thus,a real-time arrival picking method of MS signals is constructed based on a convolutional-recurrent neural network(CRNN).This method fully utilizes the advantages of convolutional layers and gated recurrent units(GRU)in extracting short-and long-term features,in order to create a precise and lightweight arrival picking structure.Then,the synthetic signals with field noises are used to evaluate the hyperparameters of the CRNN model and obtain an optimal CRNN model.The actual operation on various devices indicates that compared with the U-Net method,the CRNN method achieves faster arrival picking with less performance consumption.An application of large underground caverns in the Yebatan hydropower station(YBT)project shows that compared with the short-term average/long-term average(STA/LTA),Akaike information criterion(AIC)and U-Net methods,the CRNN method has the highest accuracy within four sampling points,which is 87.44%for P-wave and 91.29%for S-wave,respectively.The sum of mean absolute errors(MAESUM)of the CRNN method is 4.22 sampling points,which is lower than that of the other methods.Among the four methods,the MS sources location calculated based on the CRNN method shows the best consistency with the actual failure,which occurs at the junction of the shaft and the second gallery.Thus,the proposed method can pick up P-and S-arrival accurately and rapidly,providing a reference for rock failure analysis and evaluation in engineering applications.

Underdetermined direction of arrival estimation with nonuniform linear motion sampling based on a small unmanned aerial vehicle platform

Uniform linear array(ULA)radars are widely used in the collision-avoidance radar systems of small unmanned aerial vehicles(UAVs).In practice,a ULA's multi-target direction of arrival(DOA)estimation performance suffers from significant performance degradation owing to the limited number of physical elements.To improve the underdetermined DOA estimation performance of a ULA radar mounted on a small UAV platform,we propose a nonuniform linear motion sampling underdetermined DOA estimation method.Using the motion of the UAV platform,the echo signal is sampled at different positions.Then,according to the concept of difference co-array,a virtual ULA with multiple array elements and a large aperture is synthesized to increase the degrees of freedom(DOFs).Through position analysis of the original and motion arrays,we propose a nonuniform linear motion sampling method based on ULA for determining the optimal DOFs.Under the condition of no increase in the aperture of the physical array,the proposed method obtains a high DOF with fewer sampling runs and greatly improves the underdetermined DOA estimation performance of ULA.The results of numerical simulations conducted herein verify the superior performance of the proposed method.

A Novel CCA-NMF Whitening Method for Practical Machine Learning Based Underwater Direction of Arrival Estimation

Underwater direction of arrival(DOA)estimation has always been a very challenging theoretical and practical problem.Due to the serious non-stationary,non-linear,and non-Gaussian characteristics,machine learning based DOA estimation methods trained on simulated Gaussian noised array data cannot be directly applied to actual underwater DOA estimation tasks.In order to deal with this problem,environmental data with no target echoes can be employed to analyze the non-Gaussian components.Then,the obtained information about non-Gaussian components can be used to whiten the array data.Based on these considerations,a novel practical sonar array whitening method was proposed.Specifically,based on a weak assumption that the non-Gaussian components in adjacent patches with and without target echoes are almost the same,canonical cor-relation analysis(CCA)and non-negative matrix factorization(NMF)techniques are employed for whitening the array data.With the whitened array data,machine learning based DOA estimation models trained on simulated Gaussian noised datasets can be used to perform underwater DOA estimation tasks.Experimental results illustrated that,using actual underwater datasets for testing with known machine learning based DOA estimation models,accurate and robust DOA estimation performance can be achieved by using the proposed whitening method in different underwater con-ditions.

Study on the pattern of train arrival headway time in high-speed railway

Purpose-The design goal for the tracking interval of high-speed railway trains in China is 3 min,but it is difficult to achieve,and it is widely believed that it is mainly limited by the tracking interval of train arrivals.If the train arrival tracking interval can be compressed,it will be beneficial for China's high-speed railway to achieve a 3-min train tracking interval.The goal of this article is to study how to compress the train arrival tracking interval.Design/methodologylapproach-By simulating the process of dense train groups arriving at the station and stopping,the headway between train arrivals at the station was calculated,and the pattern of train arrival headway was obtained,changing the traditional understanding that the train arrival headway is considered the main factor limiting the headway of trains.Findings-When the running speed of trains is high,the headway between trains is short,the length of the station approach throat area is considerable and frequent train arrivals at the station,the arrival headway for the first group or several groups of trains will exceed the headway,but the subsequent sets of trains will havea headway equal to the arrival headway.This convergence characteristic is obtained by appropriately increasing the running time.Originality/value-According to this pattern,there is no need to overly emphasize the impact of train arrival headway on the headway.This plays an important role in compressing train headway and improving high-speedrailwaycapacity.

Multiple Extreme Learning Machines Based Arrival Time Prediction for Public Bus Transport

Due to fast-growing urbanization,the traffic management system becomes a crucial problem owing to the rapid growth in the number of vehicles The research proposes an Intelligent public transportation system where informa-tion regarding all the buses connecting in a city will be gathered,processed and accurate bus arrival time prediction will be presented to the user.Various linear and time-varying parameters such as distance,waiting time at stops,red signal duration at a traffic signal,traffic density,turning density,rush hours,weather conditions,number of passengers on the bus,type of day,road type,average vehi-cle speed limit,current vehicle speed affecting traffic are used for the analysis.The proposed model exploits the feasibility and applicability of ELM in the travel time forecasting area.Multiple ELMs(MELM)for explicitly training dynamic,road and trajectory information are used in the proposed approach.A large-scale dataset(historical data)obtained from Kerala State Road Transport Corporation is used for training.Simulations are carried out by using MATLAB R2021a.The experiments revealed that the efficiency of MELM is independent of the time of day and day of the week.It can manage huge volumes of data with less human intervention at greater learning speeds.It is found MELM yields prediction with accuracy in the range of 96.7%to 99.08%.The MAE value is between 0.28 to 1.74 minutes with the proposed approach.The study revealed that there could be regularity in bus usage and daily bus rides are predictable with a better degree of accuracy.The research has proved that MELM is superior for arrival time pre-dictions in terms of accuracy and error,compared with other approaches.

Changes in Avian Spring Arrival Dates of 115 Species in the Central Appalachians over 127 Years

Global climate change affects many facets of avian ecology, such as shifts in breeding phenology and migration patterns. Migrating bird species respond to changes in climate by shifting their temporal patterns of spring migration. However, variation in species’ responses exists based on various life history traits, which exposes some species to an increased risk of phenological mismatch. This study examined the spring arrival dates of 115 migrating species over 127 years (1889-2015) using archival sources in West Virginia, USA, making this research unique in the length of study, the high number of species studied, and the historical crowd-sourced observations analyzed. Of the 115 taxa, 45 showed significant negative slopes of spring arrival dates (arriving earlier in the spring) plotted against the year. In contrast, only nine species showed positive slopes (arriving later in the spring), albeit non-significant. The average advance of spring arrival date for all species was 1.7 days per decade, and an advance of 2.6 days per decade in species that showed significance. Arrival dates were associated with increasing spring temperatures—for each 1˚C increase, the arrival date advanced by 0.81 days/decade. Several life history traits were linked to species that advanced their first arrival dates, including a shorter distance migrated to reach wintering grounds, increasing populations, and foraging habitat. Most avian species are advancing their spring arrival dates in response to climate change. However, the implications of earlier spring arrival are unclear. We draw attention to shifts in arrival dates and wintering ranges, leading to a possible increase in overwintering in the mid-latitudes of North America.

Combining Self-Organizing Map and Lipschitz Condition for Estimation in Direction of Arrival

There are many DOA estimation methods based on different signal features, and these methods are often evaluated by experimental results, but lack the necessary theoretical basis. Therefore, a direction of arrival (DOA) estimation system based on self-organizing map (SOM) and designed for arbitrarily distributed sensor array is proposed. The essential principle of this method is that the map from distance difference of arrival (DDOA) to DOA is Lipschitz continuity, it indicates the similar topology between them, and thus Kohonen SOM is a suitable network to classify DOA through DDOA. The simulation results show that the DOA estimation errors are less than 1° for most signals between 0° to 180°. Compared to MUSIC, Root-MUSIC, ESPRIT, and RBF, the errors of signals under signal-to-noise ratios (SNR) declines from 20 dB to 2 dB are robust, SOM is better than RBF and almost close to MUSIC. Further, the network can be trained in advance, which makes it possible to be implemented in real-time.

Exploiting Virtual Elasticity of Production Systems for Respecting OTD-Part 1: Post-Optimality Conditions for Ergodic Order Arrivals in Fixed Capacity Regimes

Respecting the on-time-delivery (OTD) for manufacturing orders is mandatory. This depends, however, on the probability distribution of incoming order rate. The case of non-equal distribution, such as aggregated arrivals, may compromise the observance of on-time supplies for some orders. The purpose of this paper is to evaluate the conditions of post-optimality for stochastic order rate governed production systems in order to observe OTD. Instead of a heuristic or a simulative exploration, a Cartesian-based approach is applied to developing the necessary and sufficient mathematical condition to solve the problem statement. The research result demonstrates that increasing speed of throughput reveals a latent capacity, which allows arrival orders above capacity limits to be backlog-buffered and rescheduled for OTD, exploiting the virtual manufacturing elasticity inherent to all production systems to increase OTD reliability of non JIT-based production systems.

Target Localization Based on Angle of Arrivals

Mobile location using angle of arrival （AOA） measurements has received considerable attention. This paper presents an approximation of maximum likelihood estimator （MLE） for localizing a source based on AOA measurements. By introducing an intermediate variable, the nonlinear equations relating AOA estimates can be transformed into a set of equations which are linear in the unknown parameters. It is an approximate realization of the MLE. Simulations show that the proposed algorithm outperforms the previous contribution.

Arrival time measurements of first arrival phases P and PKIKP using the method of fixed scale wavelet transformation ratio

The arrival times of first teleseismic phases are difficult to be measured precisely because of slowly and gradually changed onsets and weak amplitudes. The arrival times measured manually are usually behind the real ones. In this paper, using the ratio method of fixed scale wavelet transformations improved by us, the arrival times for the first arrival phases (such as P and PKIKP) at the teleseismic and far-teleseismic distances were measured. The results are reasonable and reliable based on the analysis and discussion of the reliabilities and errors.

Direction-of-arrival estimation for co-located multiple-input multiple-output radar using structural sparsity Bayesian learning

This paper addresses the direction of arrival （DOA） estimation problem for the co-located multiple-input multiple- output （MIMO） radar with random arrays. The spatially distributed sparsity of the targets in the background makes com- pressive sensing （CS） desirable for DOA estimation. A spatial CS framework is presented, which links the DOA estimation problem to support recovery from a known over-complete dictionary. A modified statistical model is developed to ac- curately represent the intra-block correlation of the received signal. A structural sparsity Bayesian learning algorithm is proposed for the sparse recovery problem. The proposed algorithm, which exploits intra-signal correlation, is capable being applied to limited data support and low signal-to-noise ratio （SNR） scene. Furthermore, the proposed algorithm has less computation load compared to the classical Bayesian algorithm. Simulation results show that the proposed algorithm has a more accurate DOA estimation than the traditional multiple signal classification （MUSIC） algorithm and other CS recovery algorithms.

Deep learning for P-wave arrival picking in earthquake early warning

Fast and accurate P-wave arrival picking significantly affects the performance of earthquake early warning(EEW)systems.Automated P-wave picking algorithms used in EEW have encountered problems of falsely picking up noise,missing P-waves and inaccurate P-wave arrival estimation.To address these issues,an automatic algorithm based on the convolution neural network(DPick)was developed,and trained with a moderate number of data sets of 17,717 accelerograms.Compared to the widely used approach of the short-term average/long-term average of signal characteristic function(STA/LTA),DPick is 1.6 times less likely to detect noise as a P-wave,and 76 times less likely to miss P-waves.In terms of estimating P-wave arrival time,when the detection task is completed within 1 s,DPick′s detection occurrence is 7.4 times that of STA/LTA in the 0.05 s error band,and 1.6 times when the error band is 0.10 s.This verified that the proposed method has the potential for wide applications in EEW.

Bus Arrival Time Prediction Based on Mixed Model

How to predict the bus arrival time accurately is a crucial problem to be solved in Internet of Vehicle. Existed methods cannot solve the problem effectively for ignoring the traffic delay jitter. In this paper,a three-stage mixed model is proposed for bus arrival time prediction. The first stage is pattern training. In this stage,the traffic delay jitter patterns(TDJP)are mined by K nearest neighbor and K-means in the historical traffic time data. The second stage is the single-step prediction,which is based on real-time adjusted Kalman filter with a modification of historical TDJP. In the third stage,as the influence of historical law is increasing in long distance prediction,we combine the single-step prediction dynamically with Markov historical transfer model to conduct the multi-step prediction. The experimental results show that the proposed single-step prediction model performs better in accuracy and efficiency than short-term traffic flow prediction and dynamic Kalman filter. The multi-step prediction provides a higher level veracity and reliability in travel time forecasting than short-term traffic flow and historical traffic pattern prediction models.

High-order extended coprime array design for direction of arrival estimation

Nonuniform linear arrays,such as coprime array and nested array,have received great attentions because of the increased degrees of freedom(DOFs)and weakened mutual coupling.In this paper,inspired by the existing coprime array,we propose a high-order extended coprime array(HoECA)for improved direction of arrival(DOA)estimation.We first derive the closed-form expressions for the range of consecutive lags.Then,by changing the inter-element spacing of a uniform linear array(ULA),three cases are proposed and discussed.It is indicated that the HoECA can obtain the largest number of consecutive lags when the spacing takes the maximum value.Finally,by comparing it with the other sparse arrays,the optimized HoECA enjoys a larger number of consecutive lags with mitigating mutual coupling.Simulation results are shown to evaluate the superiority of HoECA over the others in terms of DOF,mutual coupling leakage and estimation accuracy.

A novel AE source localization method using clustering detection to eliminate abnormal arrivals

Due to the significant effect of abnormal arrivals on localization accuracy,a novel acoustic emission(AE)source localization method using clustering detection to eliminate abnormal arrivals is proposed in the paper.Firstly,iterative weight estimation is utilized to obtain accurate equation residuals.Secondly,according to the distribution of equation residuals,clustering detection is used to identify and exclude abnormal arrivals.Thirdly,the AE source coordinate is recalculated with remaining normal arrivals.Experimental results of pencil-lead breaks indicate that the proposed method can achieve a better localization result with and without abnormal arrivals.The results of simulation tests further demonstrate that the proposed method possesses higher localization accuracy and robustness under different anomaly ratios and scales;even with abnormal arrivals as high as 30%,the proposed localization method still holds a correct detection rate of 91.85%.

Three-Dimensional Planning of Arrival and Departure Route Network Based on Improved Ant-Colony Algorithm

In order to improve safety,economy efficiency and design automation degree of air route in terminal airspace,Three-dimensional(3D)planning of routes network is investigated.A waypoint probability search method is proposed to optimize individual flight path.Through updating horizontal pheromones by negative feedback factors,an antcolony algorithm of path searching in 3Dterminal airspace is implemented.The principle of optimization sequence of arrival and departure routes is analyzed.Each route is optimized successively,and the overall optimization of the whole route network is finally achieved.A case study shows that it takes about 63 sto optimize 8arrival and departure routes,and the operation efficiency can be significantly improved with desirable safety and economy.

Active Source Seismic Identification and Automatic Picking of the P-wave First Arrival Using a Convolutional Neural Network

In seismic data processing,picking of the P-wave first arrivals takes up plenty of time and labor,and its accuracy plays a key role in imaging seismic structures.Based on the convolution neural network(CNN),we propose a new method to pick up the P-wave first arrivals automatically.Emitted from MINI28 vibroseis in the Jingdezhen seismic experiment,the vertical component of seismic waveforms recorded by EPS 32-bit portable seismometers are used for manually picking up the first arrivals(a total of 7242).Based on these arrivals,we establish the training and testing sets,including 25,290 event samples and 710,616 noise samples(length of each sample:2 s).After 3,000 steps of training,we obtain a convergent CNN model,which can automatically classify seismic events and noise samples with high accuracy(>99%).With the trained CNN model,we scan continuous seismic records and take the maximum output(probability of a seismic event)as the P-wave first arrival time.Compared with STA/LTA(short time average/long time average),our method shows higher precision and stronger anti-noise ability,especially with the low SNR seismic data.This CNN method is of great significance for promoting the intellectualization of seismic data processing,improving the resolution of seismic imaging,and promoting the joint inversion of active and passive sources.

Wideband angle of arrival estimation of chirp signals using virtual Wignerville distribution

To estimate the angle of arrivals （AOA） of wideband chirp sources, a new timo-frequency algorithm is proposed. In this method, virtual sensors are constructed based on the fact that the steering vectors of wideband chirp signals are linear and vary with time. And the randon Wignersville distribution （RWVD） of real sensors and virtual sensors are calculated to yield the new time-invariable steering vectors, furthermore, the noise and cross terms are suppressed. In addition, the multiple chirp signals are selected by their time-frequency points. The cost of computation is lower than the common AOA estimation methods of wideband sources due to nonrequirement of frequency focusing, interpolating and matrix decomposition, including subspace decomposition. Under the lower signal noise ratio （SNR） condition, the proposed method exhibits better precision than the method of frequency focusing （FF）. The proposed method can be further applied to nonuniform linear array （NLA） since it is not confined to the array geometry. Simulation results illustrate the efficacy of the proposed method.

Dual-cavity beam arrival time monitor design for the Shanghai soft X-ray FEL facility

Free electron lasers provide high-power and ultrashort pulses with extreme brightness. In order to improve a facility's capabilities and explore the possibility of performing high-resolution time-resolved experiments, a beam arrival time resolution under 100 fs is required. In this article, a novel beam arrival time monitor(BAM)equipped with two cavities has been designed and a beam flight time measurement scheme based on the BAM prototype has been proposed to estimate phase jitter in the signal measurement system. The two BAM cavities work at different frequencies and the frequency difference is designed to be 35 MHz. Therefore, a self-mixing intermediate frequency signal can be generated using the two cavities. The measured beam flight time shows a temporal deviation of 37 fs(rms).

Determination of Direction of Arrival of Seismic Wave by a Single Tri-axial Fiber Optic Geophone

A fiber Bragg grating (FBG) geophone and a surface seismic wave-based algorithm for detecting the direction of arrival (DOA) are described. The operational principle of FBG geophone is introduced and illustrated with systematic experimental data, demonstrating an improved FBG geophone with many advantages over the conventional geophones. An innovative, robust, and simple algorithm is developed for obtaining the bearing information on the seismic events, such as people walking, or vehicles moving. Such DOA estimate is based on the interactions and projections of surface-propagating seismic waves generated by the moving personnel or vehicles with a single tri-axial seismic sensor based on FBGs. Of particular interest is the case when the distance between the source of the seismic wave and the detector is less than or comparable to one wavelength (less than 100 m), corresponding to near-field detection, where an effective method of DOA finding lacks.