Preparation, characterization and nonlinear optical properties of colloidal gallium arsenide nanocrystals

GaAs nanocrystals were prepared via a simple mechanical ball milling technique. The prepared GaAs nanocrystals have high purity and could form colloidal ethanol suspension without any surfactant additives. The colloidal GaAs nanocrystal suspension displayed excellent two-photon absorption property over the visible and near-infrared region from 490 nm to 1064 nm, which enables it to become a promising broadband optical limiting material.

Burst mode enabled ultrafast laser inscription inside gallium arsenide

Ultrafast laser inscription(ULI)inside semiconductors offers new perspectives for 3D monolithic structures to be fabricated and new functionalities to be added in electronic and photonic microdevices.However,important challenges remain because of nonlinear effects such as strong plasma generation that distort the energy delivery at the focal point when exposing these materials to intense infrared light.Up to now,the successful technological demonstrations have primarily concentrated on silicon(Si).In this paper,we target at another important semiconductor:gallium arsenide(GaAs).With nonlinearities higher than those of Si,3D-machining of GaAs with femtosecond pulses becomes even harder.However,we show that the difficulty can be circumvented by burst-mode irradiation.We generate and apply trains of pulses at terahertz repetition rates for efficient pulse-to-pulse accumulation of laser-induced free carriers in the focal region,while avoiding an overdose of prefocal excitations.The superior performance of burst-mode irradiation is confirmed by a comparative study conducted with infrared luminescence microscopy.The results indicate a successful reduction of the plasma density in the prefocal region so that higher pulse energy reaches the focal spot.The same method is applied to identify optimum irradiation conditions considering particular cases such as asymmetric pulse trains and aberrated beams.With 64-pulse trains,we successfully manage to cross the writing threshold providing a solution for ULI inside GaAs.The application potential is finally illustrated with a stealth dicing demonstration by taking benefit of the burst mode.The irradiation method opens wide possibilities for 3D structuring inside GaAs by ULI.

Dark Current Compensation and Sensitivity Adjustment on Gallium Arsenide Linear Array Detector for X-Ray Imaging

For the last several years, the linear array x-ray detector for x-ray imaging with gallium arsenide direct conversion sensitive elements has been developed and tested at the In-stitute for High Energy Physics. The array consists of 16 sensitive modules. Each module has 128 gallium arsenide (GaAs) sensitive elements with 200 μm pitch. Current article describes two key program procedures of initial dark current compensation of each sensitive element in the linear array, and sensitivity adjustment for alignment of strip pattern in the raw image data. As a part of evaluation process a modular transfer function (MTF) was measured with the slanted sharp-edge object under RQA5 technique as it described in the International Electrotechnical Commission 62220-1 standard (high voltage 70 kVp, additional aluminium filter 21 mm) for images with compensated dark currents and adjusted sensitivity of detector elements. The 10% level of the calculated MTF function has spatial resolution within 2 - 3 pair of lines per mm for both vertical and horizontal orientation.

Determination of Band Structure of Gallium-Arsenide and Aluminium-Arsenide Using Density Functional Theory

This research paper is on Density Functional Theory (DFT) within Local Density Approximation. The calculation was performed using Fritz Haber Institute Ab-initio Molecular Simulations (FHIAIMS) code based on numerical atomic-centered orbital basis sets. The electronic band structure, total density of state (DOS) and band gap energy were calculated for Gallium-Arsenide and Aluminium-Arsenide in diamond structures. The result of minimum total energy and computational time obtained from the experimental lattice constant 5.63 A for both Gallium Arsenide and Aluminium Arsenide is -114,915.7903 eV and 64.989 s, respectively. The electronic band structure analysis shows that Aluminium-Arsenide is an indirect band gap semiconductor while Gallium-Arsenide is a direct band gap semiconductor. The energy gap results obtained for GaAs is 0.37 eV and AlAs is 1.42 eV. The band gap in GaAs observed is very small when compared to AlAs. This indicates that GaAs can exhibit high transport property of the electron in the semiconductor which makes it suitable for optoelectronics devices while the wider band gap of AlAs indicates their potentials can be used in high temperature and strong electric fields device applications. The results reveal a good agreement within reasonable acceptable errors when compared with the theoretical and experimental values obtained in the work of Federico and Yin wang [1] [2].

Behavior of exciton in direct−indirect band gap Al_(x)Ga_(1−x)As crystal lattice quantum wells

Excitons have significant impacts on the properties of semiconductors.They exhibit significantly different properties when a direct semiconductor turns in to an indirect one by doping.Huybrecht variational method is also found to influence the study of exciton ground state energy and ground state binding energy in Al_(x)Ga_(1−x)As semiconductor spherical quantum dots.The Al_(x)Ga_(1−x)As is considered to be a direct semiconductor at AI concentration below 0.45,and an indirect one at the concentration above 0.45.With regards to the former,the ground state binding energy increases and decreases with AI concentration and eigenfrequency,respectively;however,while the ground state energy increases with AI concentration,it is marginally influenced by eigenfrequency.On the other hand,considering the latter,while the ground state binding energy increases with AI concentration,it decreases with eigenfrequency;nevertheless,the ground state energy increases both with AI concentration and eigenfrequency.Hence,for the better practical performance of the semiconductors,the properties of the excitons are suggested to vary by adjusting AI concentration and eigenfrequency.

Pressure-driven anomalous thermal transport behaviors in gallium arsenide

High-pressure has been widely utilized to improve material performances such as thermal conductiv-ityκand interfacial thermal conductance G.Gallium arsenide(GaAs)as a functional semiconductor has attracted extensive attention in high-pressure studies for its technological importance and complex structure transitions.Thermal properties of GaAs under high pressure are urgent needs in physics but remain elusive.Herein,we systematically investigateκGaAs and G Al/GaAs of multi-structure up to -23 GPa.We conclude that:(1)in pressurization,phonon group velocity,lattice defects,and electrons play a central role inκGaAs in elastic,plastic,and metallization regions,respectively.The increased phonon density of states(PDOS)overlap,group velocity,and interfacial bonding enhances G Al/GaAs.(2)In depressurization,electrons remain the dominant factor on κ GaAs from 23 to 13.5 GPa.G Al/GaAs increases dramatically at -12 GPa due to the larger PDOS overlap.With decompressing to ambient,lattice defects including grain size reduction,arsenic vacancies,and partial amorphization reduce κ GaAs to a glass-like value.Remarkably,the released G Al/GaAs is 2.6 times higher than that of the initial.Thus our findings open a new dimension in synergistically realizing glass-like κ and enhancing G,which can facilitate thermoelectric performance and its potential engineering applications.

GaAs-based resonant tunneling diode:Device aspects from design,manufacturing,characterization and applications

This review article discusses the development of gallium arsenide(GaAs)-based resonant tunneling diodes(RTD)since the 1970s.To the best of my knowledge,this article is the first review of GaAs RTD technology which covers different epitaxialstructure design,fabrication techniques,and characterizations for various application areas.It is expected that the details presented here will help the readers to gain a perspective on the previous accomplishments,as well as have an outlook on the current trends and future developments in GaAs RTD research.

HIGH-ENERGY PROTON IRRADIATION EFFECTS ON GaAs/Ge SPACE SOLAR CELLS

This paper reports the high-energy proton irradiation effects on GaAs/Ge space solar cells. The solar cells were irradiated by protons with energy of 5-20 MeV at fluence ranging from 1×109 to 7×1013 cm-2, and then their electric parameters were measured at AM0. It was shown that the Isc, Voc and Pmax decrease as the proton energy increasing, and the degradation is relative to proton irradiation-induced defect with a level of Ec-0.41 eV in irradiated GaAs/Ge cells.

High Quality Zinc Sulfide Epitaxial Layers Grown by Metalorganic Chemical Vapour Deposition

ZnS films were successfully grown by metallorganic chemical vapour deposition (MOCVD) at atmospheric pressure on (100) GaAs substrates. The deposition was carried out at a substrate temperature between 280 approximately 550°C with optimisation of reactor design and growth conditions. The gas phase prereaction is effectively restrained. These epilayers exhibit high crystallographic quality and reveal a mirror surface morphology. The peak halfwidths of X-ray diffraction patterns from their (400) faces are within 0.06 approximately 0.09°. The epilayers grown on (111) GaAs, (112ˉ0) Al2O3 and (100) Si have proven to be single crystalline feature. The optical and electrical characteristics of ZnS epilayers are measured by photoluminescence, cathodeluminescence, and the Van der Pauw method. The results indicate that there are not a large number of deep centers that could be detected both at 77K and at room temperature. A broad CL peak around 2.897eV and 2.672eV was observed only under very strong excitation. Their origin has not been examined. All epilayers present high resistivities up to 1013Ω&middotcm.

Determining the sign of g factor via time-resolved Kerr rotation spectroscopy with a rotatable magnetic field

Time-resolved Kerr rotation spectroscopy is used to determine the sign of the g factor of carriers in a semiconductor material, with the help of a rotatable magnetic field in the plane of the sample. The spin precession signal of carriers at a fixed time delay is measured as a function of the orientation of the magnetic field with a fixed strength B. The signal has a sine-like form and its phase determines the sign of the g factor of carriers. As a natural extension of previous methods to measure the （time-resolved） photoluminescence or time-resolved Kerr rotation signal as a function of the magnetic field strength with a fixed orientation, such a method gives the correct sign of the g factor of electrons in GaAs. Furthermore, the sign of carriers in a （Ga, Mn）As magnetic semiconductor is also found to be negative.

Low Temperature Growth of GaAs on Si byIon Beam Cluster Technique

Ion cluster beam (ICB) technique has many advantages in depositing thin film. In present study some characters of epitaxial layer of GaAs on Si by ICB have been investigated. these include: comparison of crystalline quality between ICB deposited GaAs and vacuum deposited GaAs, and to reveal defects by etching on GaAs-Si interface. The experimental results are discussed.

Analysis of silicon-based integrated photovoltaic–electrochemical hydrogen generation system under varying temperature and illumination

Last decade witnessed tremendous research and development in the area of photo-electrolytic hydrogen generation using chemically stable nanostructured photo-cathode/anode materials. Due to intimately coupled charge separation and photo-catalytic processes, it is very difficult to optimize individual components of such system leading to a very low demonstrated solar-to-fuel efficiency (SFE) of less than 1%. Recently there has been growing interest in an integrated photovoltaic–electrochemical (PV–EC) system based on GaAs solar cells with the demonstrated SFE of 24.5% under concentrated illumination condition. But a high cost of GaAs based solar cells and recent price drop of poly-crystalline silicon (pc-Si) solar cells motivated researchers to explore silicon based integrated PV–EC system. In this paper a theoretical framework is introduced to model silicon-based integrated PV–EC device. The theoretical framework is used to analyze the coupling and kinetic losses of a silicon solar cell based integrated PV–EC water splitting system under varying temperature and illumination. The kinetic loss occurs in the range of 19.1%–27.9% and coupling loss takes place in the range of 5.45%–6.74% with respect to varying illumination in the range of 20–100?mW/cm2. Similarly, the effect of varying temperature has severe impact on the performance of the system, wherein the coupling loss occurs in the range of 0.84%–21.51% for the temperature variation from 25 to 50?°C. ? 2016 Science Press

Atomic-Scale Friction Studies on Single-Crystal Gallium Arsenide Using Atomic Force Microscope and Molecular Dynamics Simulation

This paper provides a fresh perspective and new insights into nanoscale friction by investigating it through molecular dynamics(MD)simulation and atomic force microscope(AFM)nanoscratch experiments.This work considered gallium arsenide,an importantⅢ-Ⅴdirect bandgap semiconductor material residing in the zincblende structure,as a reference sample material due to its growing usage in 5G communication devices.In the simulations,the scratch depth was tested as a variable in the fine range of 0.5-3 nm to understand the behavior of material removal and to gain insights into the nanoscale friction.Scratch force,normal force,and average cutting forces were extracted from the simulation to obtain two scalar quantities,namely,the scratch cutting energy(defined as the work performed to remove a unit volume of material)and the kinetic coefficient of friction(defined as the force ratio).A strong size effect was observed for scratch depths below 2 nm from the MD simulations and about 15 nm from the AFM experiments.A strong quantitative corroboration was obtained between the specific scratch energy determined by the MD simulations and the AFM experiments,and more qualitative corroboration was derived for the pile-up and the kinetic coefficient of friction.This conclusion suggests that the specific scratch energy is insensitive to the tool geometry and the scratch speed used in this investigation.However,the pile-up and kinetic coefficient of friction are dependent on the geometry of the tool tip.

Mercuryplane—A Spacecraft for Regular Delivery of Astronauts onto the Mercury

The project of “Mercuryplane”—a spacecraft for regular delivery of astronauts to the planet Mercury is considered. In the first stage of the flight, with the help of a carrier rocket, equipped with a chemical rocket engine, astronauts are delivered to the international space station ISS. A design consisting of an interorbital module and a takeoff-landing capsule has been developed to deliver astronauts from Earth’s orbit into Mercury’s orbit. The interorbital module is an electric rocket equipped with 8 superconductor magnetoplasma electric engines MARS type. The electric power supply for the engines is provided by a collapsible solar panel made of gallium arsenide. The design of the takeoff-landing capsule has been developed for landing and take-off from the surface of Mercury. A device has been developed to refuel in Earth’s orbit the electric rocket engines with nitrogen, and chemical rocket engines with oxygen and hydrogen, which are in liquid state The developed spacecraft is able to regularly deliver three astronauts from Earth orbit to the surface of Mercury within 35 days.

Passive Q-switching of diode-pumped Yb:YAG microchip laser with ion-implanted GaAs

We reported a passive Q-switched diode laser pumped Yb: YAG microchip laser with an ion-implanted semi-insulating GaAs wafer. The wafer was implanted with 400-keV As+ in the concentration of 1016 ions/cm2. To decrease the non-saturable loss, we annealed the ion-implanted GaAs at 500℃ for 5 minutes and coated both sides of the ion-implanted GaAs with antireflection (AR) and high reflection (HR) films, respectively. Using GaAs wafer as an absorber and an output coupler, we obtained 52-ns pulse duration of single pulse.

Diode-pumped passively Q-switched Nd:YVO_4 laser with GaAs saturable absorber

The intracavity photon density is assumed to be of Gaussian spatial distributions and its longitudinal variation is also considered in the rate equations for a laser diode (LD) end-pumped passively Q-switched Nd:YVO4 laser with GaAs saturable absorber. These space-dependent rate equations are solved numerically. The dependences of pulse width, pulse repetition rate, single-pulse energy, and peak power on incident pump power are obtained. In the experiment, the LD end-pumped passively Q-switched Nd:YVO4 laser with GaAs saturable absorber is realized and the experimental results are consistent with the numerical solutions.

Terahertz electromagnetic waves emitted from semiconductor investigated using terahertz time domain spectroscopy

Ultrafast electromagnetic waves radiated from semiconductor material under high electric fields and photoexcited by femtosecond laser pulses have been recorded by using terahertz time domain spectroscopy （THz-TDS）.The waveforms of these electromagnetic waves reflect the dynamics of the photoexcited carriers in the semiconductor material,thus,THz-TDS provides a unique opportunity to observe directly the temporal and spatial evolutions of non-equilibrium transport of carriers within sub-picosecond time scale.We report on the observed THz emission waveforms emitted from GaAs by using a novel technology,the time domain THz electro-optic （EO） sampling,which has a bipolar feature,i.e.,an initial positive peak and a subsequent negative dip that arises from its velocity overshoot.The initial positive peak has been interpreted as electron acceleration in the bottom of Γ valley in GaAs,where electrons have a light effective mass.The subsequent negative dip has been attributed to intervalley transfer from Γ to X and L valleys.Furthermore,the power dissipation spectra of the bulk GaAs in THz range are also investigated by using the Fourier transformation of the time domain THz traces.From the power dissipation spectra,the cutoff frequency for negative power dissipation （i.e.,gain） under step electric field in the bulk GaAs can also be obtained.The cutoff frequency for the gain gradually increases with increasing electric fields up to 50 kV/cm and achieves saturation at approximately 1 THz at 300 K.Furthermore,based on the temperature dependence of the cutoff frequency,we find that this cutoff frequency is governed by the energy relaxation process of electrons from L to Γ valley via successive optical phonon emission.

1.3-μm uncooled 10 Gb/s directly modulated MQW AlGaInAs/InP laser diodes

In this paper, we report a novel 1.3-μm uncooled AlGaInAs/InP multiple quantum well （MQW） ridge waveguide laser diodes. By optimizing the design of MQW structure and facet coatings, together with the application of reversed-mesa ridge waveguide （RM-RWG） structure, polyimide planarization, and lift-off processes technology, an uncooled 1.3-μm, 10-Gb/s directly modulated MQW ridge waveguide laser diode was successfully fabricated. The threshold current and the slope efficiency were 7 mA and 0.48 mW/mA, respectively. The directly modulated bandwidths of 11 and 9.2 GHz were achieved at room temperature and 80℃, respectively.

Metamorphic In_(0.53)Ga_(0.47)As p-i-n photodetector grown on GaAs substrates by low-pressure MOCVD

Top-illuminated metamorphic In0.53Ga0.47As p-i-n photodetectors are grown on the ultrathin low- temperature InP buffered GaAs substrates. Photodetectors with the 300-nm-thick In0.53Ga0.47As absorption layer show a typical responsivity of 0.12 A/W to 1.55μm optical radiation, corresponding to an external quantum efficiency of 9.6%. Photodetectors with the active area of 50 × 50 （μm） exhibit the -3 dB bandwidth up to 6 GHz. These results are very encouraging for the application of this metamorphic technology to opto-electronic integrated circuit （OEIC） devices.

Graded tensile-strained bulk InGaAs/InP superluminescent diode with very wide emission spectrum

A kind of novel broad-band superluminescent diodes (SLDs) using graded tensile-strained bulk InGaAs is developed. The graded tensile-strained bulk InGaAs is obtained by changing only group-Ⅲ trimethyl-gallium source flow during low-pressure metal organic vapor-phase epitaxy. At the injection current of 200 mA, the fabricated SLDs with such structure demonstrate full-width at half-maximum spectral width of 106 nm and the output light power of 13.6 mW, respectively.