Triboelectrostatic Separation-an Efficient Method of Producing Low Ash Clean Coal

At present, coal is mainly consumed as fuel. In fact, coal is also a kind of precious raw material in chemical industry on the premise that some harmful minerals should be removed from coal. The paper presents the results of the research on producing low ash (<2%) coal with triboelectrostatic separator used for producing high-grade active carbon. The test is conducted in bench-scale system, whose capacity is 30～100 kg/h. The results indicate that: 1) the ash content of clean coal increases with the increase of solid content of feedstock, on the contrary, the yield of clean coal is declining; 2) a high velocity may result in a good separation efficiency; 3) for the same solid content, the reunion caused by intermolecular force makes the separation efficiency drop down when the ultra-fine coal is separated; 4) the separation efficiency is improved with the increase of electric field intensity, but there is a good optimized match between the electric field intensity and yield of clean coal; 5) a low rank coal is easy-to-wash in triboelectrostatic separation process; 6) the yield of clean coal can be enhanced and the ash decreased through adapting optimized conditions according to various coals.

RESEARCH ON THE QUALITY PRICE RATIO OF COKING COAL

If assortment priee parity of Clase coking coal and its qtalty price danrcnee is nonreasonable, it deren't gulde in Anprotrig tbe quallry metaliurgical coking coal and may be influence theeconomic benefit of metallurgical enterprises. This paper propose the principles and mathematicmodel for determination aseortment party of clean cokingcoal and its quality difference of ash content in clean coking coal in order to urge wasbenes into producing superior clean coking cleal whichis under condition of consideration both interest waskeries and interest metallurgicai industry. It canbe used as a method in theory to make price strategies under condition of socialism maket economicfor washeries of clean coking coal

Effects of regenerative mechanical vibration on the mechanical integrity of ceramic diesel particulate filters

In this study, the effects of mechanical vibration on the mechanical properties of ceramic diesel particulate filters(DPFs) were investigated. The goal is to determine how the mechanical vibration used in the regenerative ash cleaning process for these filters affects their mechanical integrity during subsequent reuse. Both virgin and vibrated DPF samples were subjected to compressive and 3-point flexural loading at three different loading rates along axial and tangential directions. Statistical analysis was conducted to determine the significance of variation in the compressive and flexural strengths of the DPFs as a result of exposure to mechanical vibration. The results show that there is no statistically significant difference in both compressive and flexural strengths of the virgin DPFs and the DPFs subjected to the same level of mechanical vibration typically used in ash cleaning of DPFs. When the intensity of vibration was doubled, the drop in compressive strength became statistically significant, but less than 10% under axial loading. However, no drop in flexural strength was observed for DPFs subjected to this high intensity of mechanical vibration. The safe threshold for mechanical vibration of ceramic filters is considered to be much higher than that currently used in vibration-based ash cleaning process.