This paper presents the results of an experimental survey on the potential application of DARC （dry asphalt rubber concrete） in rail superstructure, within sub-ballast layers by measuring its damping and mechanical ...This paper presents the results of an experimental survey on the potential application of DARC （dry asphalt rubber concrete） in rail superstructure, within sub-ballast layers by measuring its damping and mechanical properties. Based on the environmental friendly point of view the DARC has the significant advantage as the backfill material of sub-ballast layer because the rubber comes from the waste tires of truck and its usage can results a significant recycling of non-biodegradable wastes. After a preliminary mix-design of several DARCs, with different rubber content that confirmed by using the Marshall test, the stiffness modulus and damping ratio both of a standard bituminous mixture and of dry asphalt rubber concrete with a rubber content equal to 1.5% were determined using the four points bending device. The experimental results were compared and a numerical analysis by means of a 2D lumped mass model was developed in order to evaluate the different performance within the rail superstructure in terms both of the deflection and of the pressure on sub-grade. Both the results on the mechanical and dissipative properties of the DARC and the mechanical behavior of the correlate rail superstructure encourage the authors to continue the research on the application of such material for sub-ballast layers.展开更多
The poor fatigue properties and high rigidity of cement asphalt emulsion treated mis(CETM) have for a long time been problems restricting its further development making it impossible for C-ETMto be used as surface lay...The poor fatigue properties and high rigidity of cement asphalt emulsion treated mis(CETM) have for a long time been problems restricting its further development making it impossible for C-ETMto be used as surface layer materials. In this paper, a new kind of cement asphalt emulsion composite-rubberized asphalt emulsion modified Portland cement concrete (RACC) was proposed, which was formed by dispersing rubberized aSPhalt emulsion coated coarse aggregates into cement mortar matrix. In order to evaluate systematically the performance of RACC, laboratory tests with nearly one thousand SPecimen were conducted for resilient modulus, fatigue properties, ultimate ban and length,abrasion, temperature contraction, and dry shrinkage. The experimental results show that the problems existed in C-ETM have to a great extends been solved by RACc. To verify the field performance and inquire into paving technology, teSt road appearsatlsfactory it is concluded that when thed ape surface laycr of semi-rigid base course, RACC is more for surface layer material than both Portland cement concrete(PCC) and asphalt concrete(AC)展开更多
In order to delay or eliminate the occurrence and expansion of the reflective cracking in the asphalt concrete overlay on old cement concrete pavement, an epoxy asphalt geogrid stress-absorbing layer（ EAGSAL） was de...In order to delay or eliminate the occurrence and expansion of the reflective cracking in the asphalt concrete overlay on old cement concrete pavement, an epoxy asphalt geogrid stress-absorbing layer（ EAGSAL） was designed. The EAGSAL consists of epoxy asphalt and fiberglass geogrid. The pull-out test, skewshearing test, bending beam test and fatigue test were conducted to evaluate the performance of the EAGSAL and a traditional stress-absorbing layer（ TSAL）. The results showthat the adhesive performance, shear performance, bending strength and fatigue performance of the EAGSAL with an optimal spraying volume of epoxy asphalt are better than those of optimally designed TSAL, and the maximum bending strain of the EAGSAL is very close to that of the TSAL. The EAGSAL has superior performance in reflective cracking resistance.Moreover, the EAGSAL with the optimal spraying volume of approximately 2. 0 L m^2 is thinner and lighter than the TSAL,which can decrease the thickness and improve the bearing ability of the whole pavement structure.展开更多
A three-dimensional finite element model （3D FEM） is built using ABAQUS to analyze the dynamic response of a concrete pavement structure with an asphalt isolating layer under moving loads. The 3D model is prepared a...A three-dimensional finite element model （3D FEM） is built using ABAQUS to analyze the dynamic response of a concrete pavement structure with an asphalt isolating layer under moving loads. The 3D model is prepared and validated in the state of no asphalt isolating layer. Stress and deflection at the critical load position are calculated by changing thickness, modulus of isolating layer and the combination between the isolating layer and concrete slab. Analysis result shows that the stress and deflection of the concrete slab increase with the increase of thickness. The stress and deflection of the concrete slab decrease with the increase of combination between the isolating layer and concrete slab. The influence of changing the isolating layer modulus to the stress and deflection of the concrete slab is not significant. From the results, asphalt isolating layer design is suggested in concrete pavement.展开更多
The corrosion of the anticorrosion coating and the defects of the asphalt concrete paved layer have been investigated on long-span steel box bridge decks. The anticorrosion coating lies in the midclle of two entirely ...The corrosion of the anticorrosion coating and the defects of the asphalt concrete paved layer have been investigated on long-span steel box bridge decks. The anticorrosion coating lies in the midclle of two entirely different materials： a highway steel box bridge deck and a paved layer, which is used as anticorrosion and waterproof coating for the steel bridge deck. For our study, electrochemical corrosion and pull strength experiments have been selected for the investigation of the corrosion properties of inorganic zinc rich coating, epoxy zinc rich coating and arc sprayed zinc coating. The adhesive strength between the coatings and the panel, and the effect of the coating corrosion on the shear properties of the paved layers including cast asphalt, thermal asphalt mortar, epoxy asphalt and modified asphalt con- crete have been investigated. The results show that the adhesive strength between the coatings and the bridge panel is controlled by the method of pre-processing rust removal. Coating by sandblasting has stronger adhesive strength than coating by shot peening. The results also reveal that shear strength of the paved layer is affected by the corrosion product of zinc coating. The arc sprayed zinc coating has stronger shear strength than zinc rich coatings.展开更多
文摘This paper presents the results of an experimental survey on the potential application of DARC （dry asphalt rubber concrete） in rail superstructure, within sub-ballast layers by measuring its damping and mechanical properties. Based on the environmental friendly point of view the DARC has the significant advantage as the backfill material of sub-ballast layer because the rubber comes from the waste tires of truck and its usage can results a significant recycling of non-biodegradable wastes. After a preliminary mix-design of several DARCs, with different rubber content that confirmed by using the Marshall test, the stiffness modulus and damping ratio both of a standard bituminous mixture and of dry asphalt rubber concrete with a rubber content equal to 1.5% were determined using the four points bending device. The experimental results were compared and a numerical analysis by means of a 2D lumped mass model was developed in order to evaluate the different performance within the rail superstructure in terms both of the deflection and of the pressure on sub-grade. Both the results on the mechanical and dissipative properties of the DARC and the mechanical behavior of the correlate rail superstructure encourage the authors to continue the research on the application of such material for sub-ballast layers.
文摘The poor fatigue properties and high rigidity of cement asphalt emulsion treated mis(CETM) have for a long time been problems restricting its further development making it impossible for C-ETMto be used as surface layer materials. In this paper, a new kind of cement asphalt emulsion composite-rubberized asphalt emulsion modified Portland cement concrete (RACC) was proposed, which was formed by dispersing rubberized aSPhalt emulsion coated coarse aggregates into cement mortar matrix. In order to evaluate systematically the performance of RACC, laboratory tests with nearly one thousand SPecimen were conducted for resilient modulus, fatigue properties, ultimate ban and length,abrasion, temperature contraction, and dry shrinkage. The experimental results show that the problems existed in C-ETM have to a great extends been solved by RACc. To verify the field performance and inquire into paving technology, teSt road appearsatlsfactory it is concluded that when thed ape surface laycr of semi-rigid base course, RACC is more for surface layer material than both Portland cement concrete(PCC) and asphalt concrete(AC)
基金The National Natural Science Foundation of China(No.51178114,51378122)
文摘In order to delay or eliminate the occurrence and expansion of the reflective cracking in the asphalt concrete overlay on old cement concrete pavement, an epoxy asphalt geogrid stress-absorbing layer（ EAGSAL） was designed. The EAGSAL consists of epoxy asphalt and fiberglass geogrid. The pull-out test, skewshearing test, bending beam test and fatigue test were conducted to evaluate the performance of the EAGSAL and a traditional stress-absorbing layer（ TSAL）. The results showthat the adhesive performance, shear performance, bending strength and fatigue performance of the EAGSAL with an optimal spraying volume of epoxy asphalt are better than those of optimally designed TSAL, and the maximum bending strain of the EAGSAL is very close to that of the TSAL. The EAGSAL has superior performance in reflective cracking resistance.Moreover, the EAGSAL with the optimal spraying volume of approximately 2. 0 L m^2 is thinner and lighter than the TSAL,which can decrease the thickness and improve the bearing ability of the whole pavement structure.
基金funded by the Program of Department of Transport of Hebei Province,China(No. 2011023)
文摘A three-dimensional finite element model （3D FEM） is built using ABAQUS to analyze the dynamic response of a concrete pavement structure with an asphalt isolating layer under moving loads. The 3D model is prepared and validated in the state of no asphalt isolating layer. Stress and deflection at the critical load position are calculated by changing thickness, modulus of isolating layer and the combination between the isolating layer and concrete slab. Analysis result shows that the stress and deflection of the concrete slab increase with the increase of thickness. The stress and deflection of the concrete slab decrease with the increase of combination between the isolating layer and concrete slab. The influence of changing the isolating layer modulus to the stress and deflection of the concrete slab is not significant. From the results, asphalt isolating layer design is suggested in concrete pavement.
基金Project BK2005020 supported by the Natural Science Foundation of the Jiangsu Province
文摘The corrosion of the anticorrosion coating and the defects of the asphalt concrete paved layer have been investigated on long-span steel box bridge decks. The anticorrosion coating lies in the midclle of two entirely different materials： a highway steel box bridge deck and a paved layer, which is used as anticorrosion and waterproof coating for the steel bridge deck. For our study, electrochemical corrosion and pull strength experiments have been selected for the investigation of the corrosion properties of inorganic zinc rich coating, epoxy zinc rich coating and arc sprayed zinc coating. The adhesive strength between the coatings and the panel, and the effect of the coating corrosion on the shear properties of the paved layers including cast asphalt, thermal asphalt mortar, epoxy asphalt and modified asphalt con- crete have been investigated. The results show that the adhesive strength between the coatings and the bridge panel is controlled by the method of pre-processing rust removal. Coating by sandblasting has stronger adhesive strength than coating by shot peening. The results also reveal that shear strength of the paved layer is affected by the corrosion product of zinc coating. The arc sprayed zinc coating has stronger shear strength than zinc rich coatings.
