Performance Characterization of CR/PU Asphalt for Potential Application in Assembled Fast-Repairing Engineering

Conventional repairing methods for asphalt pavement have some inconveniences,such as insufficient strength,and are typically time-consuming.To address these issues,this study proposes a new technological method to design and prepare a high-performance assembled asphalt concrete block for fast repair of the potholes.A series of composite modified asphalt binders with 10%crumb rubber(CR)and different dosages(0%,1%,3%,5%)of polyurethane(PU)are examined to determine the optimized binder.Subsequently,the corresponding asphalt mixtures are prepared for further comparison and assessment of engineering properties,such as moistureinduced damage,high-temperature deformation,and low-temperature cracking characteristics.The test results show that PU can significantly improve the high-temperature performance and hardness of(crumb rubber modified asphalt)CRMA binder;3%PU contributes allowing the resistance of CRMA mixture to moisture-induced damage at higher levels,particularly under water whole immersion;as 3%PU is added,the high-temperature rutting deformation resistance of the CRMA mixture increases significantly,and the low-temperature anti-cracking properties are also improved slightly.Therefore,the innovatively designed high-quality assembled fast-repairing asphalt concrete block is recommended as an appropriate option for highway maintenance.

Numerical Simulation-Based Analysis of the Impact of Overloading on Segmentally Assembled Bridges

Segmentally assembled bridges are increasinglyfinding engineering applications in recent years due to their unique advantages,especially as urban viaducts.Vehicle loads are one of the most important variable loads acting on bridge structures.Accordingly,the influence of overloaded vehicles on existing assembled bridge structures is an urgent concern at present.This paper establishes thefinite element model of the segmentally assembled bridge based on ABAQUS software and analyzes the influence of vehicle overload on an assembled girder bridge struc-ture.First,afinite element model corresponding to the target bridge is established based on ABAQUS software,and the load is controlled to simulate vehicle movement in each area of the traveling zone at different times.Sec-ond,the key cross-sections of segmental girder bridges are monitored in real time based on the force character-istics of continuous girder bridges,and they are compared with the simulation results.Finally,a material damage ontology model is introduced,and the structural damage caused by different overloading rates is compared and analyzed.Results show that thefinite element modeling method is accurate by comparing with on-site measured data,and it is suitable for the numerical simulation of segmental girder bridges;Dynamic sensors installed at 1/4L,1/2L,and 3/4L of the segmental girder main beams could be used to identify the dynamic response of segmental girder bridges;The bottom plate of the segmental girder bridge is mostly damaged at the position where the length of the precast beam section changes and the midspan position.With the increase in load,damage in the direction of the bridge develops faster than that in the direction of the transverse bridge.Thefindings of this study can guide maintenance departments in the management and maintenance of bridges and vehicles.

Application Strategies of Modular Design in Assembled Teaching Buildings

As an efficient,environmentally friendly,energy-saving construction method,assembled buildings are now widely used in campus building construction.Modular design thinking is system-based design thinking,and its application to the design of an assembled teaching building project will comprehensively improve the rationality of the teaching building and component design.The paper focuses on the application of modular design thinking in assembled teaching building design,aiming to provide references for China’s architectural design units,giving full play to the advantages of modular design thinking in future teaching building design projects,and enhancing the level of design,for the construction of the teaching building and the basis of the technical guarantee.

Electrodeposited 3D hierarchical NiFe microflowers assembled from nanosheets robust for the selective electrooxidation of furfuryl alcohol

A robust and green strategy for the selective upgrading of biomass-derived platform chemicals towards highly valuable products is important for the sustainable development.Herein,the efficient electrocatalytic oxidation of biomass-derived furfuryl alcohol(FFA)into furoic acid(FurAc)catalyzed by the electrodeposited non-precious NiFe microflowers was successfully reached under the low temperature and ambient pressure.The 3D hierarchical NiFe microflowers assembled from ultrathin nanosheets were controllably synthesized by the electrodeposition method and uniformly grown on carbon fiber paper(CFP).Electrochemical analysis confirmed that NiFe nanosheets more preferred in the selective oxidation of FFA(FFAOR)than oxygen evolution reaction(OER).The linear sweep voltammetry(LSV)in FFAOR displayed a clear decrease towards lower potential,resulting in 30 mV reduction of overpotential at 20 mA cm^(-2) compared with that of OER.The optimal catalyst Ni_(1)Fe_(2) nanosheets exhibited the highest selectivity of FurAc(94.0%)and 81.4%conversion of FFA within 3 h.Besides,the influence of various reaction parameters on FFAOR was then explored in details.After that,the reaction pathway was investigated and rationally proposed.The outstanding performance for FFAOR can be ascribed to the unique structure of 3D flower-like NiFe nanosheets and oxygen vacancies,resulting in large exposure of active sites,faster electron transfer and enhanced adsorption of reactants.Our findings highlight a facile and convenient mean with a promising green future,which is promising for processing of various biomass-derived platform chemicals into value-added products.

Response Spectrum Analysis of 7-story Assembled Frame Structure with Energy Dissipation System

Viscoelastic damper is an effective passive damping device,which can reduce the seismic response of the structure by increasing the damping and dissipating the vibration energy of structures.It has a wide application prospect in actual structural vibration control because of simple device and economical material.In view of the poor seismic behaviors of assembled frame structure connections,various energy dissipation devices are proposed to improve the seismic performance.The finite element numerical analysis method is adopted to analyze relevant energy dissipation structural parameters.The response spectrum of a 7-story assembled frame structure combined the ordinary steel support,ordinary viscoelastic damper,and viscoelastic damper with displacement amplification device is analyzed.The analysis results show that the mechanical behavior of assembled frame structure with ordinary steel supports are not significantly different from those without energy dissipation devices.The assembled frame structure with viscoelastic damper has better seismic performance and energy dissipation,especially for the viscoelastic damper with displacement amplification devices.The maximum value of inter-story displacement angle decreases by 32.24%;the maximum floor displacement decreases by 31.91%,and the base shear decreases by 13.62%compared with the assembled frame structures without energy dissipation devices.The results show that the seismic fortification ability of the structure is significantly improved,and the overall structure is more uniformly stressed.The damping structure with viscoelastic damper mainly reduces the dynamic response of the structure by increasing the damping coefficient,rather than by changing the natural vibration period of the structure.This paper provides an effective theoretical basis and reference for improving the energy dissipation system and the seismic performance of assembled frame structures.

Analysis of Soundproof Technology of Assembled Steel Structure Houses

The problem of noise has always been highlighted in assembled steel structure houses.Therefore,it is necessary to use effective soundproof measures where steel beams intersect with the reserved line pipe openings,doors,windows,elevator shafts,and other locations.In this paper,we will investigate the areas with subpar soundproof performance in an assembled steel structure residential project and propose suitable noise control measures to address this issue.

Gyroscope Dynamic Balance Counterweight Prediction Based on Multi-Head ResGAT Networks

The dynamic balance assessment during the assembly of the coordinator gyroscope significantly impacts the guidance accuracy of precision-guided equipment.In dynamic balance debugging,reliance on rudimentary counterweight empirical formulas persists,resulting in suboptimal debugging accuracy and an increased repetition rate.To mitigate this challenge,we present a multi-head residual graph attention network(ResGAT)model,designed to predict dynamic balance counterweights with high precision.In this research,we employ graph neural networks for interaction feature extraction from assembly graph data.An SDAE-GPC model is designed for the assembly condition classification to derive graph data inputs for the ResGAT regression model,which is capable of predicting gyroscope counterweights under small-sample conditions.The results of our experiments demonstrate the effectiveness of the proposed approach in predicting dynamic gyroscope counterweight in its assembly process.Our approach surpasses current methods in mitigating repetition rates and enhancing the assembly efficiency of gyroscopes.

Optimization of Fixture Number in Large Thin-Walled Parts Assembly Based on IPSO

There are lots of researches on fixture layout optimization for large thin-walled parts.Current researches focus on the positioning problem,i.e.,optimizing the positions of a constant number of fixtures.However,how to determine the number of fixtures is ignored.In most cases,the number of fixtures located on large thin-walled parts is determined based on engineering experience,which leads to huge fixture number and extra waste.Therefore,this paper constructs an optimization model to minimize the number of fixtures.The constraints are set in the optimization model to ensure that the part deformation is within the surface profile tolerance.In addition,the assembly gap between two parts is also controlled.To conduct the optimization,this paper develops an improved particle swarm optimization(IPSO)algorithm by integrating the shrinkage factor and adaptive inertia weight.In the algorithm,particles are encoded according to the fixture position.Each dimension of the particle is assigned to a sub-region by constraining the optional position range of each fixture to improve the optimization efficiency.Finally,a case study on ship curved panel assembly is provided to prove that our method can optimize the number of fixtures while meeting the assembly quality requirements.This research proposes a method to optimize the number of fixtures,which can reduce the number of fixtures and achieve deformation control at the same time.

Textured Asymmetric Membrane Electrode Assemblies of Piezoelectric Phosphorene and Ti_(3)C_(2)T_(x)MXene Heterostructures for Enhanced Electrochemical Stability and Kinetics in LIBs

Black phosphorus with a superior theoretical capacity(2596 mAh g^(-1))and high conductivity is regarded as one of the powerful candidates for lithium-ion battery(LIB)anode materials,whereas the severe volume expansion and sluggish kinetics still impede its applications in LIBs.By contrast,the exfoliated two-dimensional phosphorene owns negligible volume variation,and its intrinsic piezoelectricity is considered to be beneficial to the Li-ion transfer kinetics,while its positive influence has not been discussed yet.Herein,a phosphorene/MXene heterostructure-textured nanopiezocomposite is proposed with even phosphorene distribution and enhanced piezo-electrochemical coupling as an applicable free-standing asymmetric membrane electrode beyond the skin effect for enhanced Li-ion storage.The experimental and simulation analysis reveals that the embedded phosphorene nanosheets not only provide abundant active sites for Li-ions,but also endow the nanocomposite with favorable piezoelectricity,thus promoting the Li-ion transfer kinetics by generating the piezoelectric field serving as an extra accelerator.By waltzing with the MXene framework,the optimized electrode exhibits enhanced kinetics and stability,achieving stable cycling performances for 1,000 cycles at 2 A g^(-1),and delivering a high reversible capacity of 524 m Ah g^(-1)at-20℃,indicating the positive influence of the structural merits of self-assembled nanopiezocomposites on promoting stability and kinetics.

Deterministic processes drive turnover-dominated beta diversity of breeding birds along the central Himalayan elevation gradient

Beta diversity,the variation of community composition among sites,bridges alpha and gamma diversity and can reveal the mechanisms of community assembly through applying distance-decay models and/or partitioning beta diversity into turnover and nestedness components from functional and phylogenetic perspectives.Mountains as the most natural experiment system provide good opportunities for exploring beta diversity patterns and the underlying ecological processes.Here,we simultaneously consider distance-decay models and multiple di-mensions of beta diversity to examine spatial variations of bird communities,and to evaluate the relative importance of niche-based and neutral community assembly mechanisms along a 3600-m elevational gradient in the central Himalayas,China.Our results showed that species turnover dominates taxonomic,functional,and phylogenetic beta diversity.We observed strongest evidence of spatial distance decays in taxonomic similarities of birds,followed by its phylogenetic and functional analogues.Turnover component was highest in taxonomic beta diversity,while nestedness component was highest in functional beta diversity.Further,all correlations of assemblage similarity with climatic distance were higher than that with spatial distances.Standardized values of overall taxonomic,functional,and phylogenetic beta diversity and their turnover components increase with increasing elevational distance,while the standardized values of taxonomic and phylogenetic nestedness decreased with increasing elevational distance.Our results highlighted the niche-based deterministic processes in shaping elevational bird diversity patterns that were determined by the relative roles of decreasing trend of environmental filtering and increasing trend of limiting similarity along elevation distances.

Gapless Genome Assembly of ZH8015 and Preliminary Multi-Omics Analysis to Investigate ZH8015's Responses Against Brown Planthopper Infestation

Accurate genomic information is essential for advancing genetic breeding research in specific rice varieties.This study presented a gapless genome assembly of the indica rice cultivar Zhonghui 8015(ZH8015)using Pac Bio HiFi,Hi-C,and ONT(Oxford Nanopore Technologies)ultra-long sequencing technologies,annotating 43037 gene structures.Subsequently,utilizing this genome along with transcriptomic and metabolomic techniques,we explored ZH8015's response to brown planthopper(BPH)infestation.Continuous transcriptomic sampling indicated significant changes in gene expression levels around 48 h after BPH feeding.Enrichment analysis revealed particularly significant alterations in genes related to reactive oxygen species scavenging and cell wall formation.Metabolomic results demonstrated marked increases in levels of several monosaccharides,which are components of the cell wall and dramatic changes in flavonoid contents.Omics association analysis identified differentially expressed genes associated with key metabolites,shedding light on ZH8015's response to BPH infestation.In summary,this study constructed a reliable genome sequence resource for ZH8015,and the preliminary multi-omics results will guide future insect-resistant breeding research.

Self-assembly of tau fragments as a key pathologic event in tauopathies

Tau protein is encoded by the microtubuleassociated protein tau(MAPT)gene and stabilizes microtubules in the neurons.Tau has unique biophysical properties that make it both highly water-soluble and positively charged.Although tau is an intrinsically disordered protein lacking defined secondary structures,it can acquire highly organized-sheet structures and stack into a filamentous inclusion such as a paired helical filament(PHF).

Ionic Liquid-Enhanced Assembly of Nanomaterials for Highly Stable Flexible Transparent Electrodes

The controlled assembly of nanomaterials has demon-strated significant potential in advancing technological devices.However,achieving highly efficient and low-loss assembly technique for nanomate-rials,enabling the creation of hierarchical structures with distinctive func-tionalities,remains a formidable challenge.Here,we present a method for nanomaterial assembly enhanced by ionic liquids,which enables the fabrication of highly stable,flexible,and transparent electrodes featuring an organized layered structure.The utilization of hydrophobic and non-volatile ionic liquids facilitates the production of stable interfaces with water,effectively preventing the sedimentation of 1D/2D nanomaterials assembled at the interface.Furthermore,the interfacially assembled nanomaterial monolayer exhibits an alternate self-climbing behavior,enabling layer-by-layer transfer and the formation of a well-ordered MXene-wrapped silver nanowire network film.The resulting composite film not only demonstrates exceptional photoelectric performance with a sheet resistance of 9.4Ωsq^(-1) and 93%transmittance,but also showcases remarkable environmental stability and mechanical flexibility.Particularly noteworthy is its application in transparent electromagnetic interference shielding materials and triboelectric nanogenerator devices.This research introduces an innovative approach to manufacture and tailor functional devices based on ordered nanomaterials.

RNA m6A dynamic modification mediated by nucleuslocalized FTO is involved in follicular reserve

In eukaryotic organisms,the most common internal modification of messenger RNA(m RNA)is N6-methyladenosine(m6A).This modification can be dynamically and reversibly controlled by specific enzymes known as m6A writers and erasers.The fat-mass and obesity-associated protein(FTO)catalyzes RNA demethylation and plays a critical role in various physiological and pathological processes.Our research identified dynamic alterations in both m6A and FTO during the assembly of primordial follicles,with an inverse relationship observed for m6A levels and nuclear-localized FTO expression.Application of Fto small interfering RNA(si RNA)altered the expression of genes related to cell proliferation,hormone regulation,and cell chemotaxis,and affected RNA alternative splicing.Overexpression of the full-length Fto gene led to changes in m6A levels,alternative splicing of Cdk5,cell proliferation,cell cycle progression,and proportion of primordial follicles.Conversely,overexpression of Fto lacking a nuclear localization signal(NLS)did not significantly alter m6A levels or primordial follicle assembly.These findings suggest that FTO,localized in the nucleus but not in the cytoplasm,regulates RNA m6A demethylation and plays a role in cell proliferation,cell cycle progression,and primordial follicle assembly.These results highlight the potential of m6A and its eraser FTO as possible biomarkers and therapeutic targets.

Development of Fixture Layout Optimization for Thin-Walled Parts:A Review

An increasing number of researchers have researched fixture layout optimization for thin-walled part assembly during the past decades.However,few papers systematically review these researches.By analyzing existing literature,this paper summarizes the process of fixture layout optimization and the methods applied.The process of optimization is made up of optimization objective setting,assembly variation/deformation modeling,and fixture layout optimization.This paper makes a review of the fixture layout for thin-walled parts according to these three steps.First,two different kinds of optimization objectives are introduced.Researchers usually consider in-plane variations or out-of-plane deformations when designing objectives.Then,modeling methods for assembly variation and deformation are divided into two categories:Mechanism-based and data-based methods.Several common methods are discussed respectively.After that,optimization algorithms are reviewed systematically.There are two kinds of optimization algorithms:Traditional nonlinear programming and heuristic algorithms.Finally,discussions on the current situation are provided.The research direction of fixture layout optimization in the future is discussed from three aspects:Objective setting,improving modeling accuracy and optimization algorithms.Also,a new research point for fixture layout optimization is discussed.This paper systematically reviews the research on fixture layout optimization for thin-walled parts,and provides a reference for future research in this field.

A telomere-to-telomere genome assembly of Zhonghuang 13,a widely-grown soybean variety from the original center of Glycine max

Soybean(Glycine max)stands as a globally significant agricultural crop,and the comprehensive assembly of its genome is of paramount importance for unraveling its biological characteristics and evolutionary history.Nevertheless,previous soybean genome assemblies have harbored gaps and incompleteness,which have constrained in-depth investigations into soybean.Here,we present Telomere-to-Telomere(T2T)assembly of the Chinese soybean cultivar Zhonghuang 13(ZH13)genome,termed ZH13-T2T,utilizing PacBio Hifi and ONT ultralong reads.We employed a multi-assembler approach,integrating Hifiasm,NextDenovo,and Canu,to minimize biases and enhance assembly accuracy.The assembly spans 1,015,024,879 bp,effectively resolving all 393 gaps that previously plagued the reference genome.Our annotation efforts identified 50,564 high-confidence protein-coding genes,707 of which are novel.ZH13-T2T revealed longer chromosomes,421 not-aligned regions(NARs),112 structure variations(SVs),and a substantial expansion of repetitive element compared to earlier assemblies.Specifically,we identified 25.67 Mb of tandem repeats,an enrichment of 5S and 48S rDNAs,and characterized their genotypic diversity.In summary,we deliver the first complete Chinese soybean cultivar T2T genome.The comprehensive annotation,along with precise centromere and telomere characterization,as well as insights into structural variations,further enhance our understanding of soybean genetics and evolution.

Engineering vascularized organotypic tissues via module assembly

Adequate vascularization is a critical determinant for the successful construction and clinical implementation of complex organotypic tissue models. Currently, low cell and vessel density and insufficient vascular maturation make vascularized organotypic tissue construction difficult,greatly limiting its use in tissue engineering and regenerative medicine. To address these limitations, recent studies have adopted pre-vascularized microtissue assembly for the rapid generation of functional tissue analogs with dense vascular networks and high cell density. In this article, we summarize the development of module assembly-based vascularized organotypic tissue construction and its application in tissue repair and regeneration, organ-scale tissue biomanufacturing, as well as advanced tissue modeling.

Genome sequencing provides insights into Caprifoliaceae genome evolution and the mechanism underlying second blooming phenomenon in Heptacodium miconioides

Plants of the Caprifoliaceae family are widely cultivated worldwide as ornamental plants owing to their numerous,sweet-smelling,beautiful flowers and fruits.Heptacodium miconioides Rehd.,a member of the family,is endemic to eastern China and is cultivated as a popular ornamental plant in North America and European countries.It has a rather novel and beautiful trait of high horticultural value,that is,its sepals persist and enlarge,turning purplish red.Here,we report the chromosome-level genome assembly of H.miconioides to understand its evolution and floral characteristics.The 622.28 Mb assembled genome harbored a shared whole-genome duplication with a related species,Lonicera japonica.Comparative genomic analysis suggested that chromosome fission events following genome duplication underlie the unusual chromosome number of these two species,as well as chromosome fission of another five chromosomes in H.miconioides,giving rise to a haploid chromosome number of 14(versus 9 in L.japonica).In addition,based on transcriptome and chloroplast genome analysis of 17 representative species in the Caprifoliaceae,we assumed that large structural variations in the chromosomes of H.miconioides were not caused by hybridization.Changes in the candidate genes of the MADS-box family were detected in the H.miconioides genome,including AP1-,AP3-,and SEPexpanded,which might underlie the sepal elongation and development in this species.The current findings provided a critical resource for genome evolution studies in Caprifoliaceae and it was an example of how multi-omics data can elucidate the regulation of important ornamental traits.

A simple and efficient CRISPR/Cas9 system permits ultra-multiplex genome editing in plants

The development and maturation of the CRISPR/Cas genome editing system provides a valuable tool for plant functional genomics and genetic improvement.Currently available genome-editing tools have a limited number of targets,restricting their application in genetic research.In this study,we developed a novel CRISPR/Cas9 plant ultra-multiplex genome editing system consisting of two template vectors,eight donor vectors,four destination vectors,and one primer-design software package.By combining the advantages of Golden Gate cloning to assemble multiple repetitive fragments and Gateway recombination to assemble large fragments and by changing the structure of the amplicons used to assemble sg RNA expression cassettes,the plant ultra-multiplex genome editing system can assemble a single binary vector targeting more than 40 genomic loci.A rice knockout vector containing 49 sg RNA expression cassettes was assembled and a high co-editing efficiency was observed.This plant ultra-multiplex genome editing system advances synthetic biology and plant genetic engineering.

A telomere-to-telomere genome assembly of Hongyingzi,a sorghum cultivar used for Chinese Baijiu production

Sorghum(Sorghum bicolor(L.)Moench)is a world cereal crop used in China for producing Baijiu,a distilled spirit.We report a telomere-to-telomere genome assembly of the Baijiu cultivar Hongyingzi,HYZ-T2T,using ultralong reads.The 10 chromosome pairs contained 33,462 genes,of which 93%were functionally annotated.The 20 telomeres and 10 centromeric regions on the HYZ-T2T chromosomes were predicted and two consecutive large inversions on chromosome 2 were characterized.A 65-gene reconstruction of the metabolic pathway of tannins,the flavor substances in Baijiu,was performed and may advance the breeding of sorghum cultivars for Baijiu production.