Mechanical assembly has its own dynamic quality directly affecting the dynamic quality of whole product and should be considered in quality inspection and estimation of mechanical assembly. Based on functional relatio...Mechanical assembly has its own dynamic quality directly affecting the dynamic quality of whole product and should be considered in quality inspection and estimation of mechanical assembly. Based on functional relations between dynamic characteristics involved in mechanical assembly, the effects of assembling process on dynamic characteristics of substructural components of an assembly system are investigated by substructuring analysis. Assembly-coupling dynamic stiffness is clarified as the dominant factor of the effects and can be used as a quantitative measure of assembly dynamic quality. Two computational schemes using frequency response functions(FRFs) to determine the stiffness are provided and discussed by inverse substructuring analysis, including their applicable conditions and implementation procedure in application. Eigenvalue analysis on matrix-ratios of FRFs before and after assembling is employed and well validates the analytical outcomes and the schemes via both a lumped-parameter model and its analogic experimental counterpart. Applying the two schemes to inspect the dynamic quality provides the message of dynamic performance of the assembly system, and therefore improves conventional quality inspection and estimation of mechanical assembly in completeness.展开更多
Product assembly simulation is considered as one of the key technologies in the process of complex product design and manufacturing.Virtual assembly realizes the assembly process design,verification,and optimization o...Product assembly simulation is considered as one of the key technologies in the process of complex product design and manufacturing.Virtual assembly realizes the assembly process design,verification,and optimization of complex products in the virtual environment,which plays an active and effective role in improving the assembly quality and efficiency of complex products.In recent years,augmented reality(AR)and digital twin(DT)technology have brought new opportunities and challenges to the digital assembly of complex products owing to their characteristics of virtual reality fusion and interactive control.This paper expounds the concept and connotation of AR,enumerates a typical AR assembly system structure,analyzes the key technologies and applications of AR in digital assembly,and notes that DT technology is the future development trend of intelligent assembly research.展开更多
Operations in assembling and joining large size aircraft components are changed to novel digital and flexible ways by digital measurement assisted alignment.Positions and orientations(P&O)of aligned components are ...Operations in assembling and joining large size aircraft components are changed to novel digital and flexible ways by digital measurement assisted alignment.Positions and orientations(P&O)of aligned components are critical characters which assure geometrical positions and relationships of those components.Therefore,evaluating the P&O of a component is considered necessary and critical for ensuring accuracy in aircraft assembly.Uncertainty of position and orientation(U-P&O),as a part of the evaluating result of P&O,needs to be given for ensuring the integrity and credibility of the result;furthermore,U-P&O is necessary for error tracing and quality evaluating of measurement assisted aircraft assembly.However,current research mainly focuses on the process integration of measurement with assembly,and usually ignores the uncertainty of measured result and its influence on quality evaluation.This paper focuses on the expression,analysis,and application of U-P&O in measurement assisted alignment.The geometrical and algebraical connotations of U-P&O are presented.Then,an analytical algorithm for evaluating the multi-dimensional U-P&O is given,and the effect factors and characteristics of U-P&O are discussed.Finally,U-P&O is used to evaluate alignment in aircraft assembly for quality evaluating and improving.Cases are introduced with the methodology.展开更多
The microvibrations produced by momentum wheel assemblies(MWA) can degrade the performance of instruments with high pointing precision and stability on spacecraft.This paper concentrates on analyzing and testing the...The microvibrations produced by momentum wheel assemblies(MWA) can degrade the performance of instruments with high pointing precision and stability on spacecraft.This paper concentrates on analyzing and testing the microvibrations produced by MWA.We analyze the disturbance sources produced by mass imbalance,structural mode,bearing irregularity and nonlinear stiffness,and random noise;then,test a well-balanced MWA by a highly sensitive measurement system consisting of a Kistler table and an optical tabletop.The results show that the test system has a resolution of less than 0.003 N in the frequency range of 3-300 Hz.The dynamic imbalance of the MWA cannot excite the radial rocking mode,but there are dynamic amplifications when the poly-harmonic disturbances intersect with the structural modes.Especially at high rotational speed(〉3 000 rev/min),the main disturbance sources of the MWA come from the bearing irregularity interacting with radial translation mode in the high frequency range.Thus,bearing noise deserves more attention for the well-balanced MWA,and alternative of high quality bearings are proposed to reduce the microvibrations.展开更多
基金Supported by National Natural Science Foundation of China(Grant No.51475211)
文摘Mechanical assembly has its own dynamic quality directly affecting the dynamic quality of whole product and should be considered in quality inspection and estimation of mechanical assembly. Based on functional relations between dynamic characteristics involved in mechanical assembly, the effects of assembling process on dynamic characteristics of substructural components of an assembly system are investigated by substructuring analysis. Assembly-coupling dynamic stiffness is clarified as the dominant factor of the effects and can be used as a quantitative measure of assembly dynamic quality. Two computational schemes using frequency response functions(FRFs) to determine the stiffness are provided and discussed by inverse substructuring analysis, including their applicable conditions and implementation procedure in application. Eigenvalue analysis on matrix-ratios of FRFs before and after assembling is employed and well validates the analytical outcomes and the schemes via both a lumped-parameter model and its analogic experimental counterpart. Applying the two schemes to inspect the dynamic quality provides the message of dynamic performance of the assembly system, and therefore improves conventional quality inspection and estimation of mechanical assembly in completeness.
基金the National Natural Science Foundation of China(51875517,51490663 and 51821093)and Key Research and Development Program of Zhejiang Province(2017C01045).
文摘Product assembly simulation is considered as one of the key technologies in the process of complex product design and manufacturing.Virtual assembly realizes the assembly process design,verification,and optimization of complex products in the virtual environment,which plays an active and effective role in improving the assembly quality and efficiency of complex products.In recent years,augmented reality(AR)and digital twin(DT)technology have brought new opportunities and challenges to the digital assembly of complex products owing to their characteristics of virtual reality fusion and interactive control.This paper expounds the concept and connotation of AR,enumerates a typical AR assembly system structure,analyzes the key technologies and applications of AR in digital assembly,and notes that DT technology is the future development trend of intelligent assembly research.
基金support of National Natural Science Foundation of China (No.50905010)Fund of National Engineering and Research Center for Commercial Aircraft Manufacturing (No.SAMC12-JS-15-044)
文摘Operations in assembling and joining large size aircraft components are changed to novel digital and flexible ways by digital measurement assisted alignment.Positions and orientations(P&O)of aligned components are critical characters which assure geometrical positions and relationships of those components.Therefore,evaluating the P&O of a component is considered necessary and critical for ensuring accuracy in aircraft assembly.Uncertainty of position and orientation(U-P&O),as a part of the evaluating result of P&O,needs to be given for ensuring the integrity and credibility of the result;furthermore,U-P&O is necessary for error tracing and quality evaluating of measurement assisted aircraft assembly.However,current research mainly focuses on the process integration of measurement with assembly,and usually ignores the uncertainty of measured result and its influence on quality evaluation.This paper focuses on the expression,analysis,and application of U-P&O in measurement assisted alignment.The geometrical and algebraical connotations of U-P&O are presented.Then,an analytical algorithm for evaluating the multi-dimensional U-P&O is given,and the effect factors and characteristics of U-P&O are discussed.Finally,U-P&O is used to evaluate alignment in aircraft assembly for quality evaluating and improving.Cases are introduced with the methodology.
文摘The microvibrations produced by momentum wheel assemblies(MWA) can degrade the performance of instruments with high pointing precision and stability on spacecraft.This paper concentrates on analyzing and testing the microvibrations produced by MWA.We analyze the disturbance sources produced by mass imbalance,structural mode,bearing irregularity and nonlinear stiffness,and random noise;then,test a well-balanced MWA by a highly sensitive measurement system consisting of a Kistler table and an optical tabletop.The results show that the test system has a resolution of less than 0.003 N in the frequency range of 3-300 Hz.The dynamic imbalance of the MWA cannot excite the radial rocking mode,but there are dynamic amplifications when the poly-harmonic disturbances intersect with the structural modes.Especially at high rotational speed(〉3 000 rev/min),the main disturbance sources of the MWA come from the bearing irregularity interacting with radial translation mode in the high frequency range.Thus,bearing noise deserves more attention for the well-balanced MWA,and alternative of high quality bearings are proposed to reduce the microvibrations.