Inner Attitude Integration Algorithm Based on Fault Detection for Strapdown Inertial Attitude and Heading Reference System

This article proposes a new inner attitude integration algorithm to improve attitude accuracy of the strapdown inertial attitude and heading reference system （SIAHRS） , which, by means of a Kalman filter, integrates the calculated attitude from the accelerometers in inertial measuring unit （IMU） , called damping attitudes, with those from the conventional IMU. As vehicle＇ s acceleration could produce damping attitude errors, the horizontal outputs from accelerometers are firstly used to judge the vehicle＇ s motion so as to determine whether the damping attitudes could be reasonably applied. This article also analyzes the limitation of this approach. Furthermore, it suggests a residual chi-square test to judge the validity of damping attitude measurement in real time, and accordingly puts forward proper information fusion strategy. Finally,the effectiveness of the proposed algorithm is proved through the experiments on a real system in dynamic and static states.

Coupled Dynamics and Integrated Control for Position and Attitude Motions of Spacecraft:A Survey

Inspired by the integrated guidance and control design for endo-atmospheric aircraft,the integrated position and attitude control of spacecraft has attracted increasing attention and gradually induced a wide variety of study results in last over two decades,fully incorporating control requirements and actuator characteristics of space missions.This paper presents a novel and comprehensive survey to the coupled position and attitude motions of spacecraft from the perspective of dynamics and control.To this end,a systematic analysis is firstly conducted in details to show the position and attitude mutual couplings of spacecraft.Particularly,in terms of the time discrepancy between spacecraft position and attitude motions,space missions can be categorized into two types:space proximity operation and space orbital maneuver.Based on this classification,the studies on the coupled dynamic modeling and the integrated control design for position and attitude motions of spacecraft are sequentially summarized and analyzed.On the one hand,various coupled position and dynamic formulations of spacecraft based on various mathematical tools are reviewed and compared from five aspects,including mission applicability,modeling simplicity,physical clearance,information matching and expansibility.On the other hand,the development of the integrated position and attitude control of spacecraft is analyzed for two space missions,and especially,five distinctive development trends are captured for space operation missions.Finally,insightful prospects on future development of the integrated position and attitude control technology of spacecraft are proposed,pointing out current primary technical issues and possible feasible solutions.

Bias Momentum Attitude Control System Using Energy/Momentum Wheels

The integrated power and attitude control for a bias momentum attitudecontrol system is investigated. A pair of counter-spinning wheels is used to provide the biasangular momentum and store/ discharge energy for power requirement of the devices on the spacecraft.The roll/yaw motion is controlled by pitch magnetic dipole moment. The torque-based control law ofthe wheels is designed, so that the desired pitch control torque is provided and the operation ofcharging/discharging energy is carried out based on the given power. System singularity in thecontrol law of wheels is fully avoided by keeping the wheels counter-spinning. A power managementscheme using kinetic energy feedback is proposed to keep energy balance, which can avoid wheelsaturation caused by superfluous energy. The minimum moment of inertia of the wheels is limited bythe maximum bias angular momentum and the minimum energy, such constrains are analyzed incombination with the geometrical method. Numerical simulation results are presented to demonstratethe effectiveness of the control scheme.

Spacecraft Attitude Tracking and Energy Storage Using Flywheels

The control law of the flywheel in an integrated power and attitude control system （IPACS） for a spacecraft is investigated. The flywheels are used as attitude control actuators as well as energy storage device. A feedback control law for attitude tracking is firstly developed by using Lyapunov approach, and then a torque based control law of the flywheel is studied. The control torque vector of the flywheel is decomposed into three parts which are orthogonal to one another by using the method of singularity value decomposition （SVD）. One part is used to provide the attitude control torque, another part is used to store energy with given power, and the last part is used to accomplish wheel speed equalization to avoid wheel saturation caused by large difference among the wheel spin rates. A management scheme for energy storage power using kinetic energy feedback is proposed to keep energy balance, which can avoid wheel saturation caused by superfluous energy. Numerical simulation results demonstrate the effectiveness of the control scheme.

Integrated Power and Single Axis Attitude Control System with Two Flywheels

The existing research of the integrated power and attitude control system（IPACS） in satellites mainly focuses on the IPACS concept,which aims at solving the coupled problem between the attitude control and power tracking.In the IPACS,the configuration design of IPACS is usually not considered,and the coupled problem between two flywheels during the attitude control and energy storage has not been resolved.In this paper,an integrated power and single axis attitude control system using two counter rotating magnetically suspended flywheels mounted to an air table is designed.The control method of power and attitude control using flywheel is investigated and the coupling problem between energy storage and attitude control is resolved.A computer simulation of an integrated power and single axis attitude control system with two flywheels is performed,which consists of two counter rotating magnetically suspended flywheels mounted to an air rotary table.Both DC bus and a single axis attitude are the regulation goals.An attitude ＆ DC bus coordinator is put forward to separate DC bus regulation and attitude control problems.The simulation results of DC bus regulation and attitude control are presented respectively with a DC bus regulator and a simple PD attitude controller.The simulation results demonstrate that it is possible to integrate power and attitude control simultaneously for satellite using flywheels.The proposed research provides theory basis for design of the IPACS.

New Strategy of IPACS Design and Energy Management for Spacecrafts

The design problem of an integrated power and attitude control system （IPACS） for spacecrafts is investigated. A Lyapunov-typed IPACS controller is designed for a spacecraft equipped with 4 flywheels （3 orthogonal ＋ 1 skew）. This controller keeps in the nonlinear properties of original systems, so the control result can be more precise. A control law of the flywheels is also proposed to accomplish the attitude control and energy storage simultaneously. Aiming at the limitations existing in the power conversion characteristic and the wheel＇s motor, a new strategy of energy management is proposed. The strategy can not only make the charged/discharged energy reaching balance in each orbital period, but also sufficiently utilize the power provided by the solar arrays. Therefore, the size and mass of solar arrays can be decreased, and the cost of spacecraft can be economized. A simulation example illustrates the validity of the designed IPACS.

On all-propulsion design of integrated orbit and attitude control for inner-formation gravity field measurement satellite

The inner-formation gravity field measurement satellite （IFS） is a novel pure gravitational orbiter. It aims to measure the Earth＇s gravity field with unprecedented accuracy and spatial resolution by means of precise orbit determination （POD） and relative state measurement. One of the key factors determining the measurement level is the outer-satellite control used for keeping the inner-satellite flying in a pure gravitational orbit stably. In this paper the integrated orbit and attitude control of IFS during steady-state phase was investigated using only thrusters. A six degree-of-freedom translational and rotational dynamics model was constructed considering nonlinearity resulted from quaternion expression and coupling induced by community thrusters. A feasible quadratic optimization model was established for the integrated orbit and attitude control using con- strained nonlinear model predictive control （CNMPC） techniques. Simulation experiment demonstrated that the presented CNMPC aigorithm can achieve rapid calculation and overcome the non-convexity of partial constraints. The thruster layout is rational with low thrust consumption, and the mission requirements of IFS are fully satisfied.

Knowledge, attitude and use of complementary and integrative health strategies: a preliminary survey of Iranian nurses

BACKGROUND： Disagreement exists regarding the need for knowledge about complementary and integrative health（CIH） strategies, as well as for the need to consider such strategies in clinical nursing practice. OBJECTIVE： This study was conducted to assess the knowledge, attitude and use of CIH strategies among nurses in Iran. DESIGN, SETTING, PARTICIPANTS AND INTERVENTIONS： A cross-sectional study of nurses working in two hospitals of Zabol University of Medical Sciences, in southeast Iran, was conducted from October 2014 to April 2015. The questionnaire, developed specifically for this research, was used to assess the knowledge, attitude and use of CIH by nurses. Descriptive and inferential statistics were used to interpret the survey responses.RESULTS： Most nurses（n=95, 60.5%） have average knowledge about CIH strategies with most holding a positive attitude about use（n=81, 51.6%）. The majority（n=90, 57.3%） of nurses, however, never applied CIH methods. Where CIH was used, massage was most often clinically applied（n=129, 82.2%） and a large percentage believed it useful for treating illness（n=136, 87.9%）. Other CIH methods commonly used included prayer and herbal medicine.CONCLUSION： Nurses have positive attitudes about CIH though knowledge was typically weak. Educational programs should carefully consider how knowledge about CIH methods could be strengthened within curricula.