Stability of indirect field-oriented control (IFOC) of induction motor drives is greatly influenced by estimated value of rotor time constant. By choosing estimation error of rotor time constant as bifurcation paramet...Stability of indirect field-oriented control (IFOC) of induction motor drives is greatly influenced by estimated value of rotor time constant. By choosing estimation error of rotor time constant as bifurcation parameter, the conditions of generating Hopf bifurcation in IFOC drives are analyzed. Dynamic responses and Lyapunov exponents show that chaos and limit cycles will arise for some ranges of load torque with certain PI speed controller setting. Stable drives are required for conventional applications, but chaotic rotation can promote efficiency or improve dynamic characteristics of drives. Thus, the study may be a guideline for designing a stable system or an oscillating system.展开更多
Induction motor is a multi-parameter, non-linear and strong coupling system, which requires efficient control algorithms. In this paper, rotor flux oriented control （FOC） algorithm based on voltage source inverter-f...Induction motor is a multi-parameter, non-linear and strong coupling system, which requires efficient control algorithms. In this paper, rotor flux oriented control （FOC） algorithm based on voltage source inverter-fed is deduced in detail, including stator voltage compensation, closed-loop PI parameters＇ calculation of torque and rotor flux. FOC＇ s Simulink model is setup to simulate torque and rotor flux＇s response. At last, the experimental results are shown.展开更多
Service-Oriented Architecture (SOA) is becoming the dominant approach for developing and organizing distributed enterprise-wide applications. Although the concepts of SOA have been extensively described in the literat...Service-Oriented Architecture (SOA) is becoming the dominant approach for developing and organizing distributed enterprise-wide applications. Although the concepts of SOA have been extensively described in the literature and in-dustry, the effects of adopting SOA on software quality are still unclear. The aim of the paper is to analyze how adopt-ing SOA can affect software quality as opposed to the Object-Oriented (OO) paradigm and expose the differential implications of adopting both paradigms on software quality. The paper provides a brief introduction of the architectural differences between the Service-Oriented (SO) and OO paradigms and a description of internal software quality metrics used for the comparison. The effects and differences are exposed by providing a case study architected for both paradigms. The quantitative measure concluded in the paper showed that a software system developed using SOA approach provides higher reusability and lower coupling among software modules, but at the same time higher complexity than those of the OO approach. It was also found that some of the existing OO software quality metrics are inapplicable to SOA software systems. As a consequence, new metrics need to be developed specifically to SOA software systems.展开更多
The control platform of the induction motor （IM） with low costs is developed by using DSP MC56F8013 with a good performance/price rtaio. The control algorithm for the speed sensorless IM is studied based on the stat...The control platform of the induction motor （IM） with low costs is developed by using DSP MC56F8013 with a good performance/price rtaio. The control algorithm for the speed sensorless IM is studied based on the stator flux orientation （SFO）. The algorithm structure is simple to be implemented and cannot be influenced by motor parameters, The improved stator flux estimation is used to compensate errors caused by the low pass filter （LPF）. A new speed regulator is designed to ensure the system working with the maximal torque in the transient state. The system simulation and the prototype experiment are made. Results show that the con- trol system has good dynamic and static performance.展开更多
The bearingless induction motor, which combines the inductionmotor and magnetic bearing is a strongly coupled complicatednonlinear system; the decoupling control of the electromag- net toqueand readial levitation forc...The bearingless induction motor, which combines the inductionmotor and magnetic bearing is a strongly coupled complicatednonlinear system; the decoupling control of the electromag- net toqueand readial levitation force is the base of the stable operation ofthe benaringless motor. In this paper, the air-gap motor fluxoriented vector control is proposed to realize the decoupling controlof this nonlinear system even in the transient case based on thelevitation principle. Simulations show the stable suspension and goodperformance of the proposed algorithm.展开更多
This paper deals a detailed performance investigation of asymmetrical six-phase grid connected induction generator(GCIG)in two proposed configurations in variable speed operation.During the system development,regulati...This paper deals a detailed performance investigation of asymmetrical six-phase grid connected induction generator(GCIG)in two proposed configurations in variable speed operation.During the system development,regulation of DC-link voltage has been proposed using particle swarm optimization(PSO)based PI controller,ensuring the power flow to utility grid through back to back converters.The closed loop operation of asymmetrical six-phase GCIG using indirect field oriented control in different configurations has been carried out in Matlab/Simulink environment.Analytical results have been verified using real time test results on virtual platform of Typhoon HIL supported with some experimental validation.展开更多
The high grade non-oriented electrical steel sheets containing 3.0%Si were manufacturing processed using different cutting techniques, then they were stress relief annealed（SRA）, the profiles and textures of the cut...The high grade non-oriented electrical steel sheets containing 3.0%Si were manufacturing processed using different cutting techniques, then they were stress relief annealed（SRA）, the profiles and textures of the cutting edges were compared before and after annealing, and the magnetic properties of these specimens were tested and compared. The experimental results show that the iron loss of the specimen by water jet cutting is the lowest, but the magnetic induction under the low magnetic field is the highest, the iron loss of the specimen by laser cutting is the highest, but the magnetic induction under the low magnetic field is the lowest. It is necessary to adopt suitable production conditions and minimize the deterioration involved, and the magnetic property can be recovered by SRA effectively.展开更多
Based on the state governance background of peasant household oriented land circulation,I analyzed characteristics of peasant household oriented land circulation.The characteristics mainly include uncertain definition...Based on the state governance background of peasant household oriented land circulation,I analyzed characteristics of peasant household oriented land circulation.The characteristics mainly include uncertain definition of rural land circulation,significant off-media feature of land circulation,long-term land circulation contract,farmers' preference of peasant household oriented land circulation,and progressive path of land circulation.The essential feature is the progressive mode of land circulation.Under the existing property right,it realizes the perfect combination of modern production factors and traditional agricultural,and the combination of traditional family safeguarding function and modern social mutual growth spirit.Thus,it shows relative independence and manifests the idea of common prosperity.The opportunity cost of peasant household oriented land circulation is minimal,institutional cost will increase circulation risk,and what's more,the cost for state governance of peasant household oriented land circulation is minimal.It comes to conclusion that building proper and harmonious land circulation mechanism is responsibility of central government and favorable for healthy development of peasant household oriented land circulation.展开更多
Generalist avian brood parasites vary considerably in their degree of host specialization(e.g.,number of hosts);some parasitize the nests of just a few host species,whereas others exploit more than 100 species.Several...Generalist avian brood parasites vary considerably in their degree of host specialization(e.g.,number of hosts);some parasitize the nests of just a few host species,whereas others exploit more than 100 species.Several factors,including habitat range,habitat type,and geographic location,have been suggested to account for these variations.However,inter-specific differences in individual attributes,such as personality and plasticity,have rarely been considered as potential factors of such variation,despite their potential relationship to,for example,range expansion.Using cage experiments,we tested the hypothesis that parasitic species exploiting more host species may be more active and exploratory.To this end,we quantified behaviors exhibited by two Cuculus cuckoos(Common Cuckoo C.canorus and Oriental Cuckoo C.optatus)that vary greatly in their number of host species.Specifically,we evaluated exploratory behavior displayed by birds in the cage,such as the number of movements,head-turning,wing-flapping,and stepping.The Common Cuckoo,which has a higher number of host species,tended to exhibit higher levels of exploratory behaviors than the Oriental Cuckoo.Our study showed that the two cuckoo species exhibited different exploratory levels,as predicted by the differences in their number of hosts.Further studies regarding the causality between individual attributes and host specialization with improved experimental methodology would greatly enhance our understanding of the role of individual characteristics in the coevolution of avian brood parasites and their hosts.展开更多
Rotor flux and torque of an induction motor (IM) are decoupled to obtain performance of DC motor. The decoupling strategy has been developed in terms of stator current components where the core loss is neglected. Many...Rotor flux and torque of an induction motor (IM) are decoupled to obtain performance of DC motor. The decoupling strategy has been developed in terms of stator current components where the core loss is neglected. Many different controllers including fuzzy logic controller (FLC) with neglecting core loss have been designed to control the speed of induction motor. The outcome of investigation about the effect of core loss on indirect field oriented control (IFOC) has been concluded that the actual flux and torque are not reached to the reference flux and torque if core loss is neglected. Thus, the purpose of this paper is to propose a fuzzy logic speed controller of induction motor where flux and torque decoupling strategy is decoupled in terms of magnetizing current instead of stator current to alleviate the effects of core loss. The performances of proposed fuzzy-logic-based controller have been verified by computer simulation. The simulation of speed control of IM using PI and FLC are performed. The simulation study for high-performance control of IM drive shows the superiority of the proposed fuzzy logic controller over the conventional PI controller.展开更多
This paper investigates a Luenberger flux observer with speed adaptation for a direct field oriented control of an induction motor. An improved method of speed estimation that operates on the principle of speed adapti...This paper investigates a Luenberger flux observer with speed adaptation for a direct field oriented control of an induction motor. An improved method of speed estimation that operates on the principle of speed adaptive flux and current observer has been proposed. An observer is basically an estimator that uses a plant model and a feedback loop with measured stator voltage and current. Simulation results show that the proposed direct field oriented control with the proposed observer provides good performance dynamic characteristics. The induction motor is fed by an indirect power electronics converter. This indirect converter is controlled by a sliding mode technique that enables minimization of harmonics introduced by the line converter, as well as the control of the power factor and DC-link voltage. The robustness of the overall system is studied using simulation for different operating modes and varied parameters.展开更多
基金This work was supported by the National Natural Science Foundation of China (No,50177009) and Guangdong Natural Science Foundation (No.011652) .
文摘Stability of indirect field-oriented control (IFOC) of induction motor drives is greatly influenced by estimated value of rotor time constant. By choosing estimation error of rotor time constant as bifurcation parameter, the conditions of generating Hopf bifurcation in IFOC drives are analyzed. Dynamic responses and Lyapunov exponents show that chaos and limit cycles will arise for some ranges of load torque with certain PI speed controller setting. Stable drives are required for conventional applications, but chaotic rotation can promote efficiency or improve dynamic characteristics of drives. Thus, the study may be a guideline for designing a stable system or an oscillating system.
文摘Induction motor is a multi-parameter, non-linear and strong coupling system, which requires efficient control algorithms. In this paper, rotor flux oriented control （FOC） algorithm based on voltage source inverter-fed is deduced in detail, including stator voltage compensation, closed-loop PI parameters＇ calculation of torque and rotor flux. FOC＇ s Simulink model is setup to simulate torque and rotor flux＇s response. At last, the experimental results are shown.
文摘Service-Oriented Architecture (SOA) is becoming the dominant approach for developing and organizing distributed enterprise-wide applications. Although the concepts of SOA have been extensively described in the literature and in-dustry, the effects of adopting SOA on software quality are still unclear. The aim of the paper is to analyze how adopt-ing SOA can affect software quality as opposed to the Object-Oriented (OO) paradigm and expose the differential implications of adopting both paradigms on software quality. The paper provides a brief introduction of the architectural differences between the Service-Oriented (SO) and OO paradigms and a description of internal software quality metrics used for the comparison. The effects and differences are exposed by providing a case study architected for both paradigms. The quantitative measure concluded in the paper showed that a software system developed using SOA approach provides higher reusability and lower coupling among software modules, but at the same time higher complexity than those of the OO approach. It was also found that some of the existing OO software quality metrics are inapplicable to SOA software systems. As a consequence, new metrics need to be developed specifically to SOA software systems.
文摘The control platform of the induction motor （IM） with low costs is developed by using DSP MC56F8013 with a good performance/price rtaio. The control algorithm for the speed sensorless IM is studied based on the stator flux orientation （SFO）. The algorithm structure is simple to be implemented and cannot be influenced by motor parameters, The improved stator flux estimation is used to compensate errors caused by the low pass filter （LPF）. A new speed regulator is designed to ensure the system working with the maximal torque in the transient state. The system simulation and the prototype experiment are made. Results show that the con- trol system has good dynamic and static performance.
文摘The bearingless induction motor, which combines the inductionmotor and magnetic bearing is a strongly coupled complicatednonlinear system; the decoupling control of the electromag- net toqueand readial levitation force is the base of the stable operation ofthe benaringless motor. In this paper, the air-gap motor fluxoriented vector control is proposed to realize the decoupling controlof this nonlinear system even in the transient case based on thelevitation principle. Simulations show the stable suspension and goodperformance of the proposed algorithm.
文摘This paper deals a detailed performance investigation of asymmetrical six-phase grid connected induction generator(GCIG)in two proposed configurations in variable speed operation.During the system development,regulation of DC-link voltage has been proposed using particle swarm optimization(PSO)based PI controller,ensuring the power flow to utility grid through back to back converters.The closed loop operation of asymmetrical six-phase GCIG using indirect field oriented control in different configurations has been carried out in Matlab/Simulink environment.Analytical results have been verified using real time test results on virtual platform of Typhoon HIL supported with some experimental validation.
基金Funded by the High Technology Research and Development Program of China(2011AA11A238)
文摘The high grade non-oriented electrical steel sheets containing 3.0%Si were manufacturing processed using different cutting techniques, then they were stress relief annealed（SRA）, the profiles and textures of the cutting edges were compared before and after annealing, and the magnetic properties of these specimens were tested and compared. The experimental results show that the iron loss of the specimen by water jet cutting is the lowest, but the magnetic induction under the low magnetic field is the highest, the iron loss of the specimen by laser cutting is the highest, but the magnetic induction under the low magnetic field is the lowest. It is necessary to adopt suitable production conditions and minimize the deterioration involved, and the magnetic property can be recovered by SRA effectively.
基金Supported by Henan Province Philosophy and Social Science Planning Project (2010FJJ045)Decision-making Project of Henan Provincial Government (2011B559)
文摘Based on the state governance background of peasant household oriented land circulation,I analyzed characteristics of peasant household oriented land circulation.The characteristics mainly include uncertain definition of rural land circulation,significant off-media feature of land circulation,long-term land circulation contract,farmers' preference of peasant household oriented land circulation,and progressive path of land circulation.The essential feature is the progressive mode of land circulation.Under the existing property right,it realizes the perfect combination of modern production factors and traditional agricultural,and the combination of traditional family safeguarding function and modern social mutual growth spirit.Thus,it shows relative independence and manifests the idea of common prosperity.The opportunity cost of peasant household oriented land circulation is minimal,institutional cost will increase circulation risk,and what's more,the cost for state governance of peasant household oriented land circulation is minimal.It comes to conclusion that building proper and harmonious land circulation mechanism is responsibility of central government and favorable for healthy development of peasant household oriented land circulation.
基金supported by the National Research Foundation of Korea(NRF2017R1D1A1B03030329,NRF-2019K2A9A2A06022677)。
文摘Generalist avian brood parasites vary considerably in their degree of host specialization(e.g.,number of hosts);some parasitize the nests of just a few host species,whereas others exploit more than 100 species.Several factors,including habitat range,habitat type,and geographic location,have been suggested to account for these variations.However,inter-specific differences in individual attributes,such as personality and plasticity,have rarely been considered as potential factors of such variation,despite their potential relationship to,for example,range expansion.Using cage experiments,we tested the hypothesis that parasitic species exploiting more host species may be more active and exploratory.To this end,we quantified behaviors exhibited by two Cuculus cuckoos(Common Cuckoo C.canorus and Oriental Cuckoo C.optatus)that vary greatly in their number of host species.Specifically,we evaluated exploratory behavior displayed by birds in the cage,such as the number of movements,head-turning,wing-flapping,and stepping.The Common Cuckoo,which has a higher number of host species,tended to exhibit higher levels of exploratory behaviors than the Oriental Cuckoo.Our study showed that the two cuckoo species exhibited different exploratory levels,as predicted by the differences in their number of hosts.Further studies regarding the causality between individual attributes and host specialization with improved experimental methodology would greatly enhance our understanding of the role of individual characteristics in the coevolution of avian brood parasites and their hosts.
文摘Rotor flux and torque of an induction motor (IM) are decoupled to obtain performance of DC motor. The decoupling strategy has been developed in terms of stator current components where the core loss is neglected. Many different controllers including fuzzy logic controller (FLC) with neglecting core loss have been designed to control the speed of induction motor. The outcome of investigation about the effect of core loss on indirect field oriented control (IFOC) has been concluded that the actual flux and torque are not reached to the reference flux and torque if core loss is neglected. Thus, the purpose of this paper is to propose a fuzzy logic speed controller of induction motor where flux and torque decoupling strategy is decoupled in terms of magnetizing current instead of stator current to alleviate the effects of core loss. The performances of proposed fuzzy-logic-based controller have been verified by computer simulation. The simulation of speed control of IM using PI and FLC are performed. The simulation study for high-performance control of IM drive shows the superiority of the proposed fuzzy logic controller over the conventional PI controller.
文摘This paper investigates a Luenberger flux observer with speed adaptation for a direct field oriented control of an induction motor. An improved method of speed estimation that operates on the principle of speed adaptive flux and current observer has been proposed. An observer is basically an estimator that uses a plant model and a feedback loop with measured stator voltage and current. Simulation results show that the proposed direct field oriented control with the proposed observer provides good performance dynamic characteristics. The induction motor is fed by an indirect power electronics converter. This indirect converter is controlled by a sliding mode technique that enables minimization of harmonics introduced by the line converter, as well as the control of the power factor and DC-link voltage. The robustness of the overall system is studied using simulation for different operating modes and varied parameters.
