his paper deals with the phase trans formation of austenite to ferrite within the critical temperature region(between Ac1 and Ac3).The results show that the volume fraction of trans formation of ferrite formed isother...his paper deals with the phase trans formation of austenite to ferrite within the critical temperature region(between Ac1 and Ac3).The results show that the volume fraction of trans formation of ferrite formed isothermally from austenite is mainly varied with the austenitizing temperature.The higher the austenitizing temperature,the more volume fraction of the ferrite formed isothermally from austenite.Besides,the phase trans formation of austenite to ferrite within the critical temperature region was checked by austenitizing isothermal time.The volume fraction of ferrite formed isothermally from austenite within the critical temperature region for different isothermal time has heen examined experimen tally.The lglg(l-fv)-1 vs lgt relation does not follow the Avrami equation strictly and consists of two straight lines.展开更多
The hydrogen attack of austenitic stainless steel 304 exposed to hydrogen under the pressure of 5 MPa at 733 K for 2×10~4 h in service was detected.The microstructure has been studied by SEM and TEM.Hydrogen was ...The hydrogen attack of austenitic stainless steel 304 exposed to hydrogen under the pressure of 5 MPa at 733 K for 2×10~4 h in service was detected.The microstructure has been studied by SEM and TEM.Hydrogen was determined with molten samples which had tempered at.573,673,773,873,and 973 K for 6 h.The results showed that hydrogen attack in this steel was due to methane bubbles which resulted in occuring of Cr_(23)C_6.Thermodynamic analysis of hydrogen attack for stainless steel 304 was discussed.展开更多
Baosteel’s first BTW1 austenitic high-manganese wear-resistant steel exhibits strong deformation-induced hardening characteristics.Compared with common low-alloy martensitic wear-resistant steels in the market, it ha...Baosteel’s first BTW1 austenitic high-manganese wear-resistant steel exhibits strong deformation-induced hardening characteristics.Compared with common low-alloy martensitic wear-resistant steels in the market, it has improved impact wear resistance, hard abrasive wear, erosion wear performance, and impact toughness.The metallurgical properties of such austenitic wear-resistant steel lead to the risk of failure because of hot cracking defects in the welded structure.In wear-resistant applications, evaluating hot cracking susceptibility is necessary to avoid the effect of welding defects.In this study, the Varestraint test is used to quantitatively analyze and evaluate the hot cracking susceptibility of BTW1 austenitic high-manganese wear-resistant steel.The test results show that by controlling the content of impurity elements and grain refinement, BTW1 austenitic high-manganese wear-resistant steel effectively reduces hot cracking tendency and has a low incidence of hot cracking under small strain conditions.The developed matching welding process can effectively avoid the influence of hot cracking susceptibility.展开更多
文摘his paper deals with the phase trans formation of austenite to ferrite within the critical temperature region(between Ac1 and Ac3).The results show that the volume fraction of trans formation of ferrite formed isothermally from austenite is mainly varied with the austenitizing temperature.The higher the austenitizing temperature,the more volume fraction of the ferrite formed isothermally from austenite.Besides,the phase trans formation of austenite to ferrite within the critical temperature region was checked by austenitizing isothermal time.The volume fraction of ferrite formed isothermally from austenite within the critical temperature region for different isothermal time has heen examined experimen tally.The lglg(l-fv)-1 vs lgt relation does not follow the Avrami equation strictly and consists of two straight lines.
文摘The hydrogen attack of austenitic stainless steel 304 exposed to hydrogen under the pressure of 5 MPa at 733 K for 2×10~4 h in service was detected.The microstructure has been studied by SEM and TEM.Hydrogen was determined with molten samples which had tempered at.573,673,773,873,and 973 K for 6 h.The results showed that hydrogen attack in this steel was due to methane bubbles which resulted in occuring of Cr_(23)C_6.Thermodynamic analysis of hydrogen attack for stainless steel 304 was discussed.
文摘Baosteel’s first BTW1 austenitic high-manganese wear-resistant steel exhibits strong deformation-induced hardening characteristics.Compared with common low-alloy martensitic wear-resistant steels in the market, it has improved impact wear resistance, hard abrasive wear, erosion wear performance, and impact toughness.The metallurgical properties of such austenitic wear-resistant steel lead to the risk of failure because of hot cracking defects in the welded structure.In wear-resistant applications, evaluating hot cracking susceptibility is necessary to avoid the effect of welding defects.In this study, the Varestraint test is used to quantitatively analyze and evaluate the hot cracking susceptibility of BTW1 austenitic high-manganese wear-resistant steel.The test results show that by controlling the content of impurity elements and grain refinement, BTW1 austenitic high-manganese wear-resistant steel effectively reduces hot cracking tendency and has a low incidence of hot cracking under small strain conditions.The developed matching welding process can effectively avoid the influence of hot cracking susceptibility.
