Tension Active Disturbance Rejection Control of Automatic Yarn Splicing Robots for Ring Spinning

Automatic splicing of interrupted yarns in ring spinning has always been a problem in the industry.Factors such as low yarn strengths and environmental influence on yarn tensions make it difficult to control the yarn tension during the robotic splicing process.The purpose of this research is to design active disturbance rejection control(ADRC)for a third-order nonlinear tension system subject to external disturbances.Firstly,a third-order extended state observer(ESO)is designed to achieve the suppression and the compensation of the internal modeling error and the external disturbances of the system.Secondly,the adaptive gain error feedback control and the filtering process are designed to reduce the influence of sensor noise on the disturbance observation.Finally,the tension control during the splicing process is simulated and experimented,and the experiments show that the method has good robustness in the tension tracking task under a dynamic environment,which verifies the effectiveness of the method.

Disturbances rejection optimization based on improved two-degree-of-freedom LADRC for permanent magnet synchronous motor systems

Permanent magnet synchronous motor(PMSM)speed control systems with conventional linear active disturbance rejection control(CLADRC)strategy encounter issues regarding the coupling between dynamic response and disturbance suppression and have poor performance in suppressing complex nonlinear disturbances.In order to address these issues,this paper proposes an improved two-degree-of-freedom LADRC(TDOF-LADRC)strategy,which can enhance the disturbance rejection performance of the system while decoupling entirely the system's dynamic and anti-disturbance performance to boost the system robustness and simplify controller parameter tuning.PMSM models that consider total disturbances are developed to design the TDOF-LADRC speed controller accurately.Moreover,to evaluate the control performance of the TDOF-LADRC strategy,its stability is proven,and the influence of each controller parameter on the system control performance is analyzed.Based on it,a comparison is made between the disturbance observation ability and anti-disturbance performance of TDOF-LADRC and CLADRC to prove the superiority of TDOF-LADRC in rejecting disturbances.Finally,experiments are performed on a 750 W PMSM experimental platform,and the results demonstrate that the proposed TDOF-LADRC exhibits the properties of two degrees of freedom and improves the disturbance rejection performance of the PMSM system.

Active disturbance rejection control on first-order plant

Conventional PI control encounters some problems when dealing with large lag process in the presence of parameter uncertainties.For the typical first-order process,an observerbased linear active disturbance rejection control（LADRC） scheme is presented to cope with the difficulties,and a reduced-order observer scheme is proposed further.Some quantitative dynamic results with regard to non-overshoot characteristics are obtained.Finally,the performance boundaries of LADRC and PI control are explicitly compared with each other,which shows that the former is more superior in most cases.

Research on improved active disturbance rejection control of continuous rotary motor electro-hydraulic servo system

In order to meet the precision requirements and tracking performance of the continuous rotary motor electro-hydraulic servo system under unknown strong non-linear and uncertain strong disturbance factors,such as dynamic uncertainty and parameter perturbation,an improved active disturbance rejection control(ADRC)strategy was proposed.The state space model of the fifth order closed-loop system was established based on the principle of valve-controlled hydraulic motor.Then the three parts of ADRC were improved by parameter perturbation and external disturbance;the fast tracking differentiator was introduced into linear and non-linear combinations;the nonlinear state error feedback was proposed using synovial control;the extended state observer was determined by nonlinear compensation.In addition,the grey wolf algorithm was used to set the parameters of the three parts.The simulation and experimental results show that the improved ADRC can realize the system frequency 12 Hz when the tracking accuracy and response speed meet the requirements of double ten indexes,which lay foundation for the motor application.

Active Disturbance Rejection Control for Uncertain Nonlinear Systems With Sporadic Measurements

This paper deals with the problem of active disturbance rejection control(ADRC)design for a class of uncertain nonlinear systems with sporadic measurements.A novel extended state observer(ESO)is designed in a cascade form consisting of a continuous time estimator,a continuous observation error predictor,and a reset compensator.The proposed ESO estimates not only the system state but also the total uncertainty,which may include the effects of the external perturbation,the parametric uncertainty,and the unknown nonlinear dynamics.Such a reset compensator,whose state is reset to zero whenever a new measurement arrives,is used to calibrate the predictor.Due to the cascade structure,the resulting error dynamics system is presented in a non-hybrid form,and accordingly,analyzed in a general sampled-data system framework.Based on the output of the ESO,a continuous ADRC law is then developed.The convergence of the resulting closed-loop system is proved under given conditions.Two numerical simulations demonstrate the effectiveness of the proposed control method.

Active disturbance rejection control FCS-MPC strategy based on ESO of PMSM system

In order to improve the control performance of three-phase permanent magnet synchronous motor(PMSM)system,an active disturbance rejection finite control set-mode predictive control(FCS-MPC)strategy based on improved extended state observer(ESO)is proposed in this paper.ESO is designed based on the arc-hyperbolic sine function to obtain estimations of rotating speed and back electromotive force(EMF)term of motor speed.Active disturbance rejection control(ADRC)is applied as speed controller.The proposed FCS-MPC strategy aims to reduce the electromagnetic torque ripple and the complexity and calculation of the algorithm.Compared with the FCS-MPC strategy based on PI controller,the constructed control strategy can guarantee the reliable and stable operation of PMSM system,and has good speed tracking,anti-interference ability and robustness.

Active Disturbance Rejection Control for a Multiple-Flexible-Link Manipulator

The control problem of multiple-flexible-link manipulators( MFLMs) is studied in this paper.The dynamic model of MFLM is derived and separated into two-time scale by utilizing the singular perturbation technique. The active disturbance rejection control( ADRC) is adopted to the slow subsystem to track a desired trajectory. The proposed ADRC structure preshapes the desired trajectory by utilizing the tracking differentiator,estimates the disturbance and internal states with an extended state observer,and guarantees a robust performance by combining a feedback controller with a feedforward term. Two types of feedback controllers are designed,proportional derivative( PD) controller and nonlinear PD( NPD) controller. For the fast subsystem,a fast stabilizing control is designed according to the standard linear quadratic regulator approach. Simulations are performed to evaluate the proposed control scheme.Results show that,compared with the traditional PD controller,the ADRC structure based control scheme has smaller overshot and shorter settling time,suppresses vibration quickly,and is robust to the maneuver speed. In general,the control scheme utilizing ADRC structure and NPD feedback controller shows better performance.

Active disturbance rejection control for precise position tracking of piezoelectric actuators

Positioning with high precision piezoelectric actuators is widely used.To overcome positioning inaccuracy caused by hysteresis and creep of actuators,a precise tracking method for piezoelectric actuators using active disturbance rejection control(ADRC) has been proposed in this paper.This method,in real-time,actively estimates and compensates parameter uncertainties,nonlinear factors such as hysteresis,and external disturbances in the tracking system.Precise tracking of the piezoelectric actuator can be achieved without any form of feedforward compensations.The experimental results demonstrate that the active disturbance rejection controller can reduce tracking errors by over90%comparing with those using the PID controller.Those features of the proposed control method are very suitable for applications in adaptive optics.

Fractional Order Linear Active Disturbance Rejection Control for Linear Flexible Joint System

A linear flexible joint system using fractional order linear active disturbance rejection control is studied in this paper.With this control scheme,the performance against disturbances,uncertainties,and attenuation is enhanced.Linear active disturbance rejection control(LADRC)is mainly based on an extended state observer(ESO)technology.A fractional integral(FOI)action is combined with the LADRC technique which proposes a hybrid control scheme like FO-LADRC.Incorporating this FOI action improves the robustness of the standard LADRC.The set-point tracking of the proposed FO-LADRC scheme is designed by Bode’s ideal transfer function(BITF)based robust closed-loop concept,an appropriate pole placement method.The effectiveness of the proposed FO-LADRC scheme is illustrated through experimental results on the linear flexible joint system(LFJS).The results show the enhancement of the robustness with disturbance rejection.Furthermore,a comparative analysis is presented with the results obtained using the integer-order LADRC and FO-LADRC scheme.

Depth control for a deep-sea self-holding intelligent buoy system based on active disturbance rejection control method

The net buoyancy of the deep-sea self-holding intelligent buoy(DSIB)will change with depth due to pressure hull deformation in the deep submergence process.The net buoyancy changes will affect the hovering performance of the DSIB.To make the DSIB have better resistance to the external disturbances caused by the net buoyancy and water resistance,a depth controller was designed to improve the depth positioning based on the active disturbance rejection control(ADRC).Firstly,a dynamic model was established based on the motion analysis of the DSIB.In addition,the extended state observer(ESO)and nonlinear state error feedback controller were designed based on the Lyapunov stability principle.Finally,semi-physical simulations for the depth control process were made by using the ADRC depth controller and traditional PID depth controller,respectively.The results of the semi-physical simulations indicate that the depth controller based on the ADRC can achieve the predefined depth control under the external disturbances.Compared with the traditional PID depth controller,the overshoot of the ADRC depth controller is 1.74%,and the depth error is within 0.5%.It not only has a better control capability to restrain the overshoot and shock caused by the external disturbances,but also can improve intelligence of the DSIB under the depth tracking task.

Multi-Objective Optimization for Active Disturbance Rejection Control for the ALSTOM Benchmark Problem

Based on a thing that it is difficult to choose the parameters of active disturbance rejection control for the non-linear ALSTOM gasifier, multi-objective optimization algorithm is applied in the choose of parameters. Simulation results show that performance tests in load change and coal quality change achieve better dynamic responses and larger scales of rejecting coal quality disturbances. The study provides an alternative to choose parameters for other control schemes of the ALSTOM gasifier.

Control of Linear Servo Carts with Integral-Based Disturbance Rejection

This paper describes a system designed for linear servo cart systems that employs an integral-based Linear Active Disturbance Rejection Control(ILADRC)scheme to detect and respond to disturbances.The upgrade in this control technique provides extensive immunity to uncertainties,attenuation,internal disturbances,and external sources of noise.The fundamental technology base of LADRC is Extended State Observer(ESO).LADRC,when combined with Integral action,becomes a hybrid control technique,namely ILADRC.Setpoint tracking is based on Bode’s Ideal Transfer Function(BITF)in this proposed ILADRC technique.This proves to be a very robust and appropriate pole placement scheme.The proposed LSC system has experimented with the hybrid ILADRC technique plotted the results.From the results,it is evident that the proposed ILADRC scheme enhances the robustness of the LSC system with remarkable disturbance rejection.Furthermore,the results of a linear quadratic regulator(LQR)and ILADRC schemes are comparatively analyzed.This analysis deduced the improved performance of ILADRC over the LQR control scheme.

ADRC FRACTIONAL ORDER PID CONTROLLER DESIGN OF HYPERSONIC FLIGHT VEHICLE

Active disturbance rejection controller（ADRC）uses tracking-differentiator（TD）to solve the contradiction between the overshoot and the rapid nature.Fractional order proportion integral derivative（PID）controller improves the control quality and expands the stable region of the system parameters.ADRC fractional order（ADRFO）PID controller is designed by combining ADRC with the fractional order PID and applied to reentry attitude control of hypersonic vehicle.Simulation results show that ADRFO PID controller has better control effect and greater stable region for the strong nonlinear model of hypersonic flight vehicle under the influence of external disturbance,and has stronger robustness against the perturbation in system parameters.

On stability analysis of nonlinear ADRC-based control system with application to inverted pendulum problems

This paper mainly focuses on stability analysis of the nonlinear active disturbance rejection control(ADRC)-based control system and its applicability to real world engineering problems.Firstly,the nonlinear ADRC(NLADRC)-based control system is transformed into a multi-input multi-output(MIMO)Lurie-like system,then sufficient condition for absolute stability based on linear matrix inequality(LMI)is proposed.Since the absolute stability is a kind of global stability,Lyapunov stability is further considered.The local asymptotical stability can be deter-mined by whether a matrix is Hurwitz or not.Using the inverted pendulum as an example,the proposed methods are verified by simulation and experiment,which show the valuable guidance for engineers to design and analyze the NL ADRC-based control system.

Path tracking for vehicle parallel parking based on ADRC controller

A novel path tracking controller for parallel parking based on active disturbance rejection control （ADRC） was presented in this paper. A second order ADRC controller was used to solve the path tracking robustness, which can estimate and compensate model uncertainty caused by steering kinematics and disturbances caused by parking speed and steering system delay. Collision-free path planning technology was adopted to generate the reference path. The simulation results validate that the performance of the proposed path tracking controller is better than the conventional PID controller. The actual vehicle tests show that the proposed path tracking controller is effective and robust to model uncertainty and disturbances.

基于ILADRC的多逆变器并联系统谐振抑制策略

针对由电网阻抗间的耦合作用而引发的多逆变器谐振现象,文章提出一种基于线性自抗扰和比例积分控制相结合的双闭环控制策略。首先,依据多逆变器拓扑,建立多逆变器并联系统的数学模型,并分析谐振产生的机理;其次,建立多逆变器并联系统的等效电路模型,并对3阶系统做分阶处理,2阶系统采用2阶自抗扰,1阶系统采用比例积分控制,从而形成双闭环控制策略;再次,建立李雅普诺夫稳定性函数,对闭环控制系统的稳定性给予了证明;最后,搭建并联逆变器系统的数字仿真模型,同时进行PI、3阶自抗扰、改进线性自抗扰的仿真比较。研究结果表明,文章所提出的双闭环控制策略不仅具有优异的谐振抑制能力,而且可以使系统获得更好的稳定性。

Compensated acceleration feedback based active disturbance rejection control for launch vehicles

In this paper, the attitude tracking and load relief control problems against wind disturbances and uncertain aerodynamics as well as the engine thrust of launch vehicles are studied.Firstly, a framework of Compensated Acceleration Feedback based Active Disturbance Rejection Control(CAF-ADRC) is established to achieve both desired attitude tracking and load relief performances. In particular, the total disturbance that includes the effects caused by both aerocoefficient perturbations and disturbances is estimated by constructing an Extended State Observer(ESO) to achieve attitude tracking. Furthermore, combined with the normal acceleration due to the engine thrust, the accelerometer measurement is also compensated to enhance the load relief effect.Secondly, the quantitative analysis of ESO and the entire closed-loop system are studied. It can be concluded that the desired attitude tracking and load relief performances can be achieved simultaneously under the proposed approach. Besides, tuning laws of the proposed approach are systematically given, which are divided into ESO, Proportional Derivative(PD) and Compensated Acceleration Feedback(CAF) modules. Moreover, the performances under CAF-ADRC approach can be better than those under CAF based PD(CAF-PD) approach by tuning load relief gain.Finally, the approach presented is applied to a typical control problem of launch vehicles with wind disturbances and parameter uncertainties.

基于ADRC和分数阶PID的永磁直驱风力发电系统控制

为了使直驱永磁风电机组在复杂风况中保持稳定运行,提出一种自抗扰控制(ADRC)和分数阶微积分PID组合的控制策略。针对转速环控制ADRC中分断点处存在不可导和不平滑问题,基于fal函数设计一种连续且平滑的tal函数,有效改善了系统原点抖振问题,并对ADRC控制器重新设计。在电流环控制中引用了分数阶微积分PID控制器替代整数阶微积分PID控制器,保证风力发电机组的可靠运行。仿真结果表明:所提控制策略与传统ADRC、改进型ADRC控制策略比较,无论是静态稳定性还是动态响应速度都优于传统ADRC和改进型ADRC。

High AOA decoupling control for aircraft based on ADRC

In this paper, a practical decoupling control scheme for fighter aircraft is proposed to achieve high angle of attack(AOA)tracking and super maneuver action by utilizing the thrust vector technology. Firstly, a six degree-of-freedom(DOF) nonlinear model with 12 variables is given. Due to low sufficiency of the aerodynamic actuators at high AOA, a thrust vector model with rotatable engine nozzles is derived. Secondly, the active disturbance rejection control(ADRC) is used to realize a three-channel decoupling control such that a strong coupling between different channels can be treated as total disturbance, which is estimated by the designed extended state observer. The control surface allocation is implemented by the traditional daisy chain method. Finally,the effectiveness of the presented control strategy is demonstrated by some numerical simulation results.

The Indirect Shared Steering Control Under Double Loop Structure of Driver and Automation

Due to the critical defects of techniques in fully autonomous vehicles,man-machine cooperative driving is still of great significance in today’s transportation system.Unlike the previous shared control structure,this paper introduces a double loop structure which is applied to indirect shared steering control between driver and automation.In contrast to the tandem indirect shared control,the parallel indirect shared control put the authority allocation system of steering angle into the framework to allocate the corresponding weighting coefficients reasonably and output the final desired steering angle according to the current deviation of vehicle and the accuracy of steering angles.Besides,the active disturbance rejection controller(ADRC)is also added in the frame in order to track the desired steering angle fleetly and accurately as well as restrain the internal and external disturbances effectively which including the steering friction torque,wind speed and ground interference etc.Eventually,we validated the advantages of double loop framework through three sets of double lane change and slalom experiments,respectively.Exactly as we expected,the simulation results show that the double loop structure can effectively reduce the lateral displacement error caused by the driver or the controller,significantly improve the tracking precision and keep great performance in trajectory tracking characteristics when driving errors occur in one of driver and controller.