Design of a modern automatic control system for the activated sludge process in wastewater treatment

The Activated Sludge Process(ASP) exhibits highly nonlinear properties. The design of an automatic control system that is robust against disturbance of inlet wastewater flow rate and has short process settling times is a challenging matter. The proposed control method is an I-P modi fied controller automatic control system with state variable feedback and control canonical form simulation diagram for the process. A more stable response is achieved with this type of modern control. Settling times of 0.48 days are achieved for the concentration of microorganisms,(reference value step increase of 50 mg·L-1) and 0.01 days for the concentration of oxygen(reference value step increase of 0.1 mg·L-1). Fluctuations of concentrations of oxygen and microorganisms after an inlet disturbance of5 × 103m3·d-1are small. Changes in the reference values of oxygen and microorganisms(increases by 10%, 20% and 30%) show satisfactory response of the system in all cases. Changes in the value of inlet wastewater flow rate disturbance(increases by 10%, 25%, 50% and 100%) are stabilized by the control system in short time. Maximum percent overshoot is also taken in consideration in all cases and the largest value is 25% which is acceptable. The proposed method with I-P controller is better for disturbance rejection and process settling times compared to the same method using PI controller. This method can substitute optimal control systems in ASP.

Design and realization of the automatic control system for the bell anneal furnace production

In accordance with the technical requirements of the full hydrogen bell anneal furnace(BAF)used for the annealing of stainless steel coils in the Baosteel Stainless Steel Business Unit,the design concept for the automatic control system was introduced in the paper.The major points described concerned the infrastructure of computers and networks,system interfaces,control functions,etc.The process control system of the full hydrogen BAF(L2)was the topic and its seven main functions were introduced.The expected output was achieved and manufacturing efficiency was enhanced within three months after the BAF units were put into operation,which demonstrated that the design concept of the automatic control system introduced in the paper was correct and that its functionalities were effective.

Design and Simulation of an Audio Signal Alerting and Automatic Control System

A large part of our daily lives is spent with audio information. Massive obstacles are frequently presented by the colossal amounts of acoustic information and the incredibly quick processing times. This results in the need for applications and methodologies that are capable of automatically analyzing these contents. These technologies can be applied in automatic contentanalysis and emergency response systems. Breaks in manual communication usually occur in emergencies leading to accidents and equipment damage. The audio signal does a good job by sending a signal underground, which warrants action from an emergency management team at the surface. This paper, therefore, seeks to design and simulate an audio signal alerting and automatic control system using Unity Pro XL to substitute manual communication of emergencies and manual control of equipment. Sound data were trained using the neural network technique of machine learning. The metrics used are Fast Fourier transform magnitude, zero crossing rate, root mean square, and percentage error. Sounds were detected with an error of approximately 17%;thus, the system can detect sounds with an accuracy of 83%. With more data training, the system can detect sounds with minimal or no error. The paper, therefore, has critical policy implications about communication, safety, and health for underground mine.

Development of Distributed Control System for Neutral Beam Injector on EAST

A distributed control system of Neutral Beam Injector （NBI） on the Experimental Advanced Superconducting Tokamak （EAST-NBI） is briefly presented in this paper. The control system is developed in accordance with the experimental operational characteristics of the EAST- NBI. The NBI control system （NBICS）, which is based on the computer network technologies and classified according to the control levels, consists of three levels： a remote monitoring layer, a server control layer, and a field control layer. The 3-layer architecture is capable of extending the system functions and upgrading devices. The timing system provides the reference clock of the synchronization and interlock for the EAST-NBI system. An interlock system ensures the safety of the experiment operators and field devices. Both of the ion sources of the beamline are designed to operate independently. This lays an important foundation for developing a control system for the second beamline on EAST. Experimental results demonstrate that the NBICS meets functional requirements of the EAST-NBI control, and makes experimental operations visual and automatic.

Automatic Control of Automobile Transmission Performance Test Stand

To realize automatic control of automobile transmission performance test stand Methods The automatic control technique of the lubricant temperature,the program- controll- edautomaticshifting of the transmission,the continuous adjusting of revolution speed and load, data-acquisition and data real-time processing were adopted.Results The lubricant temperature was controlled at the set temperature ±2℃.The automatic shifting of the trans- mission is simple,reliable and accurate.The automatic adjusting of load and rotation speed is rapidandaccurate,the torque divergence is ±1N·m,the rotation speed divergence is ±5r/min Conclusion The four kinds of techniques are applied into the automobile transmission perfor- mance test stand successfully. mancetest stand successfully.

Research on HCI Prototype Design of Ink Automatic Control System for Offset Printer

In order to solve the low efficiency and poor precision problems of traditional ink control methods on domestic offset printers,developing modern ink automatic control system has become more and more urgent.As an important subsystem,the hu- man computer interface (HCI) is a key function for the wholly automatic control.Once this goal is obtained,all the printing pro- cedures especially the automatic control of ink volume should be finished with human computer interface in different areas.consid- ering the HCI design theory and structure characteristics of domestic printers comprehensively,the HCI prototype for automatic ink control system has been developed based on Visual Basic platform.As the individual ink key is instead of the integrated key,the di- vision result of ink fountain can be displayed on the interface.Through the interface,the dynamic adjusting functions such as mod- ifying ink volume,locking or unlocking each ink key and real-time displaying the adjusting results etc.can be completed.The sim- ulation test has shown that the opening and practical feature of the prototype is satisfactory.

Study of Robotization for Excavator on the Automatic Control System of the Excavating Process

Based on reference[1], the Automatic Control System of the Excavating Process (ACSEP) is studied and aualyzed In this paper- At first, the general structure of the control system is discussed- And theo depeded on the kinematical equations, the "Generator or Expected link variable (GE)" and "Generator of Actual bucket trajectory (CA)" are put forward. Finally, based on the current technology and existing techniques of WD-400 Mechanical Forward Excavator (MFE), the automatic system of excavating process composed of two relatively indepodent sub-systems is designed with simple but practical structure’ According to the computer simulation, this control system has high tracking precision to the desired trajectory and good adaptive capacity to the load disturbance.

A distributed control system for picosecond accelerator at SINAP

The picosecond accelerator (PA) is a low energy electron linear accelerator facility under commissioning, which is built for the experiment of ps level pulse radiolysis in Shanghai Institute of Applied Physics (SINAP). A practical distributed DA&C system for this facility has been developed. In view of the upgrading-ability and main-tainability of the control system and controlled devices, Advantech? distributed intelligent DA&C products are adopted into the control system. ADAM 5000/TCPs with the protocol of Modbus/TCP are employed to accomplish data acquisition and device control. The PC-compatible programmable logic controller, ADAM-5511, is also adopted to handle the interlocks and the emergency events. On the software side, the integrated software package King-view?V6.5, which friendly supports all Advantech products, has been used to develop the upper layer control logic and process the data. This paper describes the control system design and system architecture. The intelligent ADAM controllers and the software platform are also discussed in detail.

Implementation of Distributed Control System for Rice Mill Using C#

The paper presents the distributed control system for rice mill using C#language.The real-time manufacturing system can be implemented by utilizing the signal from the real time control units that is more operative than other old-fashioned control systems in the extent of modern industrial days.The software-based Distributed Control System(DCS)is novel fashionable than any other conventional control systems in the state-ofthe-art manufacturing developments.This research study emphasizes on the implementation of the DCS-based rice mill using visual C#.net.The Industrial Ethernet(IE)is realized between the top level controller for the operator and the controlled station for the remote devices.The model of client-server approach is more appropriate for the automation and manufacturing research purposes.In this study,the computer graphical simulation of the complete control development is depicted in real-time status quo by visual C#language under Visual Studio 2008 software.The parallel ports in the computers of remote terminal level and the master terminal level controllers have been interconnected with port interface coding by visual C#program.

Cosimulation Platform for Distributed Control System via Heterogeneous Network

A cosimulation platform was established for distributed control systems via heterogeneous network,which integrated OPNET and Matlab/Simulink.The communication node in this cosimulation platform was built based on OSI model and UDP protocol,which was adopted as the transportation layer protocol.Data exchanged between the data source module and the specified node.It was fulfilled by revising the corresponding protocol modules based on the characteristics of UDP.The effectiveness of the constructed simulation platform was demonstrated by a numerical example.

Designing Neural Network Model in Distributed Control System

The realizing of Artificial Neural Network(ANN) in Distributed Control System (DCS) is discussed. The model of ANN designed can be called as easily as conventional algorithm. It can act as an ANN controller or as an identifier in adaptive control system.

Effectiveness of Automatic Control over Flash Distillation Kettle for Liquid-Phase Bulk Polymerization of Propylene

Automatic control over flash distillation section at SINOPEC Cangzhou Refinery has been realized, resulting in saving of propylene feedstock and emission reduction to harvest significant economic benefits.

Design and Implementation of Automatic Control Drip Irrigation Device in Macadamia Digital Management

Macadamia has the highest economic value and has always enjoyed the reputation of"king of dried fruits".In the process of digital management,irrigation is the most widely used.This paper designs the automatic control drip irrigation device in the digital management of macadamia nuts,including drip irrigation pipe,soil moisture sensor,motor,water storage chamber,water pump and central controller,and then gives an implementation scheme.The device is not only convenient for laying and positioning,but also convenient for controlling the overall irrigation water consumption during each drip irrigation and accurate use and improving the level of digital management.

The Application of Principle of Automatic Control in the site Management of Electric Power Construction Enterprise

It is need to establish site project department during the construction of electric power project.The head office should design and build the main structure,continually improve structure of project department,meantime,positively apply principle of automatic control to improve the site management of electric power construction.In this article,the application strategy of principle of automatic control is analyzed focusing on the site work of electric power construction.

Design and Application of Water, Fertilizer and Pesticide Integrated Automatic Control Device

Integration of water, fertilizer and pesticide is the final stage of agricultural development, which improves the utilization efficiency of water, fertilizer and pesticide. Starting from the design and realization of water, fertilizer and pesticide integrated automatic control device, the paper discusses selection and application of fertilizer pesticides, use procedure, water, fertilizer and pesticide saving effect and receptive crowd in the application process of modern planting industry, so as to provide the basis for promotion and popularization of water, fertilizer and pesticide integration.

Automatic Control of Water Pumping Stations

Automatic Control of pumps is an interesting proposal to operate water pumping stations among many kinds of water pumping stations according to their functions.In this paper,our pumping station is being used for water supply system. This paper is to introduce the idea of pump controller and the important factors that must be considering when we want to design automatic control system of water pumping stations. Then the automatic control circuit with the function of all components will be introduced.

Leader-follower Optimal Selection Method for Distributed Control System in Active Distribution Networks

Aiming at the shortcomings of a traditional centralized control in an active distribution network(AND),this paper proposes a leader-follower distributed group cooperative control strategy to realize multiple operation and control tasks for an ADN.The distributed information exchange protocols of the distributed generation(DG)group devoted to node voltage regulation or exchange power control are developed using a DG power utilization ratio as the consensus variable.On these bases,this study further investigates the leader optimal selection method for a DG group to improve the response speed of the distributed control system.Furthermore,a single or multiple leader selection model is established to minimize the constraints of the one-step convergence factor and the number of leaders to improve the response speed of the distributed control system.The simulation results of the IEEE 33 bus standard test system show the effectiveness of the proposed distributed control strategy.In addition,the response speed of a DG control group can be improved effectively when the single or multiple leaders are selected optimally.

Observer-based dynamic event-triggered control for distributed parameter systems over mobile sensor-plus-actuator networks

We develop a policy of observer-based dynamic event-triggered state feedback control for distributed parameter systems over a mobile sensor-plus-actuator network.It is assumed that the mobile sensing devices that provide spatially averaged state measurements can be used to improve state estimation in the network.For the purpose of decreasing the update frequency of controller and unnecessary sampled data transmission, an efficient dynamic event-triggered control policy is constructed.In an event-triggered system, when an error signal exceeds a specified time-varying threshold, it indicates the occurrence of a typical event.The global asymptotic stability of the event-triggered closed-loop system and the boundedness of the minimum inter-event time can be guaranteed.Based on the linear quadratic optimal regulator, the actuator selects the optimal displacement only when an event occurs.A simulation example is finally used to verify that the effectiveness of such a control strategy can enhance the system performance.

MAS Based Distributed Automatic Generation Control for Cyber-Physical Microgrid System

The microgrid is a typical cyber-physical microgrid system (CPMS). The physical unconventional distributed generators (DGs) are intermittent and inverter-interfaced which makes them very different to control. The cyber components, such as the embedded computer and communication network, are equipped with DGs, to process and transmit the necessary information for the controllers. In order to ensure system-wide observability, controllability and stabilization for the microgrid, the cyber and physical component need to be integrated. For the physical component of CPMS, the droop-control method is popular as it can be applied in both modes of operation to improve the grid transient performance. Traditional droop control methods have the drawback of the inherent trade-off between power sharing and voltage and frequency regulation. In this paper, the global information (such as the average voltage and the output active power of the microgrid and so on) are acquired distributedly based on multi-agent system (MAS). Based on the global information from cyber components of CPMS, automatic generation control (AGC) and automatic voltage control (AVC) are proposed to deal with the drawback of traditional droop control. Simulation studies in PSCAD demonstrate the effectiveness of the proposed control methods. © 2014 Chinese Association of Automation.

The Teaching Reform of“Automatic Control Theory”Course

Modern control theory course is a compulsory course for automation majors.It is based on automatic control theory course and plays an important role in teaching process.In view of the problems in the teaching of modern control theory,such as abstract content and weak mathematical foundation,this paper puts forward some reform suggestions from the aspects of teaching method,mathematical foundation,and the difference and connection with the course of automatic control theory,in order to improve students’learning interest and teaching quality.Based on the analysis of the teaching status of automatic control theory in School of Electronic and Electrical Engineering of Zhengzhou University of Science and Technology,combined with the reform needs of ideological and political needs,teaching methods,assessment and evaluation,this paper puts forward a multi-dimensional curriculum reform with“moral education as the center”and“case type”+“online and offline hybrid”+“ideological and political”Thinking.Some results have been obtained through practice.