A review of automatic detection of epilepsy based on EEG signals

Epilepsy is a common neurological disorder that occurs at all ages.Epilepsy not only brings physical pain to patients,but also brings a huge burden to the lives of patients and their families.At present,epilepsy detection is still achieved through the observation of electroencephalography(EEG)by medical staff.However,this process takes a long time and consumes energy,which will create a huge workload to medical staff.Therefore,it is particularly important to realize the automatic detection of epilepsy.This paper introduces,in detail,the overall framework of EEG-based automatic epilepsy identification and the typical methods involved in each step.Aiming at the core modules,that is,signal acquisition analog front end(AFE),feature extraction and classifier selection,method summary and theoretical explanation are carried out.Finally,the future research directions in the field of automatic detection of epilepsy are prospected.

Automatic Diagnosis of Polycystic Ovarian Syndrome Using Wrapper Methodology with Deep Learning Techniques

One of the significant health issues affecting women that impacts their fertility and results in serious health concerns is Polycystic ovarian syndrome(PCOS).Consequently,timely screening of polycystic ovarian syndrome can help in the process of recovery.Finding a method to aid doctors in this procedure was crucial due to the difficulties in detecting this condition.This research aimed to determine whether it is possible to optimize the detection of PCOS utilizing Deep Learning algorithms and methodologies.Additionally,feature selection methods that produce the most important subset of features can speed up calculation and enhance the effectiveness of classifiers.In this research,the tri-stage wrapper method is used because it reduces the computation time.The proposed study for the Automatic diagnosis of PCOS contains preprocessing,data normalization,feature selection,and classification.A dataset with 39 characteristics,including metabolism,neuroimaging,hormones,and biochemical information for 541 subjects,was employed in this scenario.To start,this research pre-processed the information.Next for feature selection,a tri-stage wrapper method such as Mutual Information,ReliefF,Chi-Square,and Xvariance is used.Then,various classification methods are tested and trained.Deep learning techniques including convolutional neural network(CNN),multi-layer perceptron(MLP),Recurrent neural network(RNN),and Bi long short-term memory(Bi-LSTM)are utilized for categorization.The experimental finding demonstrates that with effective feature extraction process using tri stage wrapper method+CNN delivers the highest precision(97%),high accuracy(98.67%),and recall(89%)when compared with other machine learning algorithms.

An automatic detection of green tide using multi-windows with their adaptive threshold from Landsat TM/ETM plus image

Since the atmospheric correction is a necessary preprocessing step of remote sensing image before detecting green tide, the introduced error directly affects the detection precision. Therefore, the detection method of green tide is presented from Landsat TM/ETM plus image which needs not the atmospheric correction. In order to achieve an automatic detection of green tide, a linear relationship（y =0.723 x＋0.504） between detection threshold y and subtraction x（x=λnir–λred） is found from the comparing Landsat TM/ETM plus image with the field surveys.Using this relationship, green tide patches can be detected automatically from Landsat TM/ETM plus image.Considering there is brightness difference between different regions in an image, the image will be divided into a plurality of windows（sub-images） with a same size firstly, and then each window will be detected using an adaptive detection threshold determined according to the discovered linear relationship. It is found that big errors will appear in some windows, such as those covered by clouds seriously. To solve this problem, the moving step k of windows is proposed to be less than the window width n. Using this mechanism, most pixels will be detected[n/k]×[n/k] times except the boundary pixels, then every pixel will be assigned the final class（green tide or sea water） according to majority rule voting strategy. It can be seen from the experiments, the proposed detection method using multi-windows and their adaptive thresholds can detect green tide from Landsat TM/ETM plus image automatically. Meanwhile, it avoids the reliance on the accurate atmospheric correction.

A detailed investigation of low latitude tweek atmospherics observed by the WHU ELF/VLF receiver:Ⅰ. Automatic detection and analysis method

As a dispersive wave mode produced by lightning strokes, tweek atmospherics provide important hints of lower ionospheric(i.e., D-region) electron density. Based on data accumulation from the WHU ELF/VLF receiver system, we develop an automatic detection module in terms of the maximum-entropy-spectral-estimation(MESE) method to identify unambiguous instances of low latitude tweeks.We justify the feasibility of our procedure through a detailed analysis of the data observed at the Suizhou Station(31.57°N, 113.32°E) on17 February 2016. A total of 3961 tweeks were registered by visual inspection;the automatic detection method captured 4342 tweeks, of which 3361 were correct ones, producing a correctness percentage of 77.4%(= 3361/4342) and a false alarm rate of 22.6%(= 981/4342).A Short-Time Fourier Transformation(STFT) was also applied to trace the power spectral profiles of identified tweeks and to evaluate the tweek propagation distance. It is found that the fitting accuracy of the frequency–time curve and the relative difference of propagation distance between the two methods through the slope and through the intercept can be used to further improve the accuracy of automatic tweek identification. We suggest that our automatic tweek detection and analysis method therefore supplies a valuable means to investigate features of low latitude tweek atmospherics and associated ionospheric parameters comprehensively.

Pavement Cracks Coupled With Shadows:A New Shadow-Crack Dataset and A Shadow-Removal-Oriented Crack Detection Approach

Automatic pavement crack detection is a critical task for maintaining the pavement stability and driving safety.The task is challenging because the shadows on the pavement may have similar intensity with the crack,which interfere with the crack detection performance.Till to the present,there still lacks efficient algorithm models and training datasets to deal with the interference brought by the shadows.To fill in the gap,we made several contributions as follows.First,we proposed a new pavement shadow and crack dataset,which contains a variety of shadow and pavement pixel size combinations.It also covers all common cracks(linear cracks and network cracks),placing higher demands on crack detection methods.Second,we designed a two-step shadow-removal-oriented crack detection approach:SROCD,which improves the performance of the algorithm by first removing the shadow and then detecting it.In addition to shadows,the method can cope with other noise disturbances.Third,we explored the mechanism of how shadows affect crack detection.Based on this mechanism,we propose a data augmentation method based on the difference in brightness values,which can adapt to brightness changes caused by seasonal and weather changes.Finally,we introduced a residual feature augmentation algorithm to detect small cracks that can predict sudden disasters,and the algorithm improves the performance of the model overall.We compare our method with the state-of-the-art methods on existing pavement crack datasets and the shadow-crack dataset,and the experimental results demonstrate the superiority of our method.

Precision orchard sprayer based on automatically infrared target detecting and electrostatic spraying techniques

There is an urgent need for new chemical application techniques and sprayers in Chinese orchard spraying.A new tractor-mounted automatic target detecting electrostatics,and air-assisted orchard sprayer was designed and developed to meet the demand of chemical pest control in orchards.This sprayer light weighted,highly efficient,reduces pesticide use and is friendly to the environment.The techniques of automatic target detecting,electrostatics,and air-assisted spraying were combined in this system.The electrostatically charged droplets are projected toward the target by the assistance of an air stream that increases the droplets penetration within canopy.Experimental results show that the new automatic target detecting orchard sprayer with an infrared sensor can save more than 50%to 75%of pesticides,improve the utilization rate(over 55%),control efficiency,and significantly reduce environmental pollution caused by the pesticide application.At the same time the key technological problems related to air-assisted low volume and electrostatic spraying were solved.

Approximate entropy and support vector machines for electroencephalogram signal classification

The automatic detection and identification of electroencephalogram waves play an important role in the prediction, diagnosis and treatment of epileptic seizures. In this study, a nonlinear dynamics index–approximate entropy and a support vector machine that has strong generalization ability were applied to classify electroencephalogram signals at epileptic interictal and ictal periods. Our aim was to verify whether approximate entropy waves can be effectively applied to the automatic real-time detection of epilepsy in the electroencephalogram, and to explore its generalization ability as a classifier trained using a nonlinear dynamics index. Four patients presenting with partial epileptic seizures were included in this study. They were all diagnosed with neocortex localized epilepsy and epileptic foci were clearly observed by electroencephalogram. The electroencephalogram data form the four involved patients were segmented and the characteristic values of each segment, that is, the approximate entropy, were extracted. The support vector machine classifier was constructed with the approximate entropy extracted from one epileptic case, and then electroencephalogram waves of the other three cases were classified, reaching a 93.33% accuracy rate. Our findings suggest that the use of approximate entropy allows the automatic real-time detection of electroencephalogram data in epileptic cases. The combination of approximate entropy and support vector machines shows good generalization ability for the classification of electroencephalogram signals for epilepsy.

Auroral event detection using spatiotemporal statistics of local motion vectors

The analysis and exploration of auroral dynamics are very significant for studying auroral mechanisms. This paper proposes a method based on auroral dynamic processes for detecting auroral events automatically. We first obtained the motion fields using the multiscale fluid flow estimator. Then, the auroral video frame sequence was represented by the spatiotemporal statistics of local motion vectors. Finally, automatic auroral event detection was achieved. The experimental results show that our methods could detect the required auroral events effectively and accurately, and that the detections were independent on any specific auroral event. The proposed method makes it feasible to statistically analyze a large number of continuous observations based on the auroral dynamic process.

Localized Coverage Connectivity Based on Shape and Area Using Mobile Sensor Robots in Wireless Sensor Networks

A wireless sensor network (WSN) is spatially distributing independent sensors to monitor physical and environmental characteristics such as temperature, sound, pressure and also provides different applications such as battlefield inspection and biological detection. The Constrained Motion and Sensor (CMS) Model represents the features and explain k-step reach ability testing to describe the states. The description and calculation based on CMS model does not solve the problem in mobile robots. The ADD framework based on monitoring radio measurements creates a threshold. But the methods are not effective in dynamic coverage of complex environment. In this paper, a Localized Coverage based on Shape and Area Detection (LCSAD) Framework is developed to increase the dynamic coverage using mobile robots. To facilitate the measurement in mobile robots, two algorithms are designed to identify the coverage area, (i.e.,) the area of a coverage hole or not. The two algorithms are Localized Geometric Voronoi Hexagon (LGVH) and Acquaintance Area Hexagon (AAH). LGVH senses all the shapes and it is simple to show all the boundary area nodes. AAH based algorithm simply takes directional information by locating the area of local and global convex points of coverage area. Both these algorithms are applied to WSN of random topologies. The simulation result shows that the proposed LCSAD framework attains minimal energy utilization, lesser waiting time, and also achieves higher scalability, throughput, delivery rate and 8% maximal coverage connectivity in sensor network compared to state-of-art works.

微型计算机控制系统的可靠性分析

目前国际上已广泛开展微机系统可靠性的研究,对控制系统进行可靠性设计。对于实时处理控制系统采用自动检测及容错设计技术,以提高系统的可靠性。假设某微机控制系统的可靠度为R(f),则该系统的失效率为F(t),即从0到t时刻内发生故障的概率为F(t)=1-R(t)。

Particle Size Estimation Based on Edge Density

Given image sequences of closely packed particles, the underlying aim is to estimate diameters without explicit segmentation. In a way, this is similar to the task of counting objects without directly counting them. Such calculations may, for example, be useful）Cast estimation of particle size in different application areas. The topic is that of estimating average size （=average diameter） of packed particles, from formulas involving edge density, and the edges from moment-based thresholding are used. An average shape factor is involved in the calculations, obtained for some frames from crude partial segmentation. Measurement results from about 80frames have been analyzed.

Research on Known Vulnerability Detection Method Based on Firmware Analysis

At present,the network security situation is becoming more and more serious.Malicious network attacks such as computer viruses,Trojans and hacker attacks are becoming more and more rampant.National and group network attacks such as network information war and network terrorism have a serious damage to the production and life of the whole society.At the same time,with the rapid development of Internet of Things and the arrival of 5G era,IoT devices as an important part of industrial Internet system,have become an important target of infiltration attacks by hostile forces.This paper describes the challenges facing firmware vulnerability detection at this stage,and introduces four automatic detection and utilization technologies in detail:based on patch comparison,based on control flow,based on data flow and ROP attack against buffer vulnerabilities.On the basis of clarifying its core idea,main steps and experimental results,the limitations of its method are proposed.Finally,combined with four automatic detection methods,this paper summarizes the known vulnerability detection steps based on firmware analysis,and looks forward to the follow-up work.

Automatic Determination of Water Hardness by Vector Colorimetry with Acid Chrome Blue K

Based on the Mg^(2+)complexation with acid chrome blue K(ACBK)at pH 10.2,an automatic system was designed to determine total hardness of water.The system consists of a vector colorimeter,a multi-channel sampling pump and both reagents A and B.Two kinds of reagent solutions were prepared and used in this system,i.e.,ammoniacal buffer and ACBK—disodium magnesium EDTA solutions.The experimental results of the standard solutions containing 2 and 3 mg/L of total hardness showed that the relative standard deviations(RSDs)were 1.9%and 2.2%,respectively,and the limit of detection(LOD)was only 0.035 mg/L.The detection of four natural water samples showed that the recoveries were between 85.0%and 108.6%,consistent with those obtained by ICP-AES method.

Automatic detection of sow estrus using a lightweight real-time detector and thermal images

Determination of ovulation time is one of the most important tasks in sow reproduction management.Temperature variation in the vulva of the sows can be used as a predictor of ovulation time.However,the skin temperatures of sows in existing studies are obtained manually from infrared thermal images,posing an obstacle to the automatic prediction of ovulation time.In this study,an improved YOLO-V5s detector based on feature fusion and dilated convolution(FDYOLOV5s)was proposed for the automatic extraction of the vulva temperature of sows based on infrared thermal images.For the purpose of reducing the model complexity,the depthwise separable convolution and the modified lightweight ShuffleNet-V2 module were introduced in the backbone.Meanwhile,the feature fusion network structure of the model was simplified for efficiency,and a mixed dilated convolutional module was designed to obtain global features.The experimental results show that FD-YOLOV5s outperformed the other nine methods,with a mean average precision(mAP)of 99.1%,an average frame rate of 156.25 fps,and a model size of only 3.86 MB,indicating that the method effectively simplifies the model while ensuring detection accuracy.Using a linear regression between manual extraction and the results extracted using this method in randomly selected thermal images,the coefficients of determination for maximum and average vulvar temperatures reached 99.5%and 99.3%,respectively.The continuous vulva temperature of sows was obtained by the target detection algorithm,and the sow estrus detection was performed by the temperature trend and compared with the manually detected estrus results.The results showed that the sensitivity,specificity,and error rate of the estrus detection algorithm were 89.3%,94.5%,and 5.8%,respectively.The method achieves real-time and accurate extraction of sow vulva temperature and can be used for the automatic detection of sow estrus,which could be helpful for the automatic prediction of ovulation time.

Chi-squared Automatic Interaction Detection Decision Tree Analysis of Risk Factors for Infant Anemia in Beijing, China

Background： In the past decades, studies on infant anemia have mainly focused on rural areas of China. With the increasing heterogeneity of population in recent years, available information on infant anemia is inconclusive in large cities of China, especially with comparison between native residents and floating population. This population-based cross-sectional study was implemented to determine the anemic status of infants as well as the risk factors in a representative downtown area of Beijing. Methods： As useful methods to build a predictive model, Chi-squared automatic interaction detection （CHAID） decision tree analysis and logistic regression analysis were introduced to explore risk factors of infant anemia. A total of 1091 infants aged 6-12 months together with their parents/caregivers living at Heping Avenue Subdistrict of Beijing were surveyed from January 1,2013 to December 31, 2014. Results： The prevalence of anemia was 12.60% with a range of 3.47%-40.00% in different subgroup characteristics. The CHAID decision tree model has demonstrated multilevel interaction among risk factors through stepwise pathways to detect anemia. Besides the three predictors identified by logistic regression model including maternal anemia during pregnancy, exclusive breastfeeding in the first 6 months, and floating population, CHAID decision tree analysis also identified the fourth risk factor, the maternal educational level, with higher overall classification accuracy and larger area below the receiver operating characteristic curve. Conclusions： The infant anemic status in metropolis is complex and should be carefully considered by the basic health care practitioners. CHAID decision tree analysis has demonstrated a better performance in hierarchical analysis of population with great heterogeneity. Risk factors identified by this study might be meaningful in the early detection and prompt treatment of infant anemia in large cities.

Automatic detection of ruminant cows’ mouth area during rumination based on machine vision and video analysis technology

In order to realize the automatic monitoring of ruminant activities of cows,an automatic detection method for the mouth area of ruminant cows based on machine vision technology was studied.Optical flow was used to calculate the relative motion speed of each pixel in the video frame images.The candidate mouth region with large motion ranges was extracted,and a series of processing methods,such as grayscale processing,threshold segmentation,pixel point expansion and adjacent region merging,were carried out to extract the real area of cows’mouth.To verify the accuracy of the proposed method,six videos with a total length of 96 min were selected for this research.The results showed that the highest accuracy was 87.80%,the average accuracy was 76.46%and the average running time of the algorithm was 6.39 s.All the results showed that this method can be used to detect the mouth area automatically,which lays the foundation for automatic monitoring of cows’ruminant behavior.

Fusing moving average model and stationary wavelet decomposition for automatic incident detection:case study of Tokyo Expressway

Traffic congestion is a growing problem in urban areas all over the world. The transport sector has been in full swing event study on intelligent transportation system for automatic detection. The functionality of automatic incident detection on expressways is a primary objective of advanced traffic management system. In order to save lives and prevent secondary incidents, accurate and prompt incident detection is necessary. This paper presents a methodology that integrates moving average （MA） model with stationary wavelet decomposition for automatic incident detection, in which parameters of layer coefficient are extracted from the difference between the upstream and downstream occupancy. Unlike other wavelet-based method presented before, firstly it smooths the raw data with MA model. Then it uses stationary wavelet to decompose, which can achieve accurate reconstruction of the signal, and does not shift the signal transfer coefficients. Thus, it can detect the incidents more accurately. The threshold to trigger incident alarm is also adjusted according to normal traffic condition with con- gestion. The methodology is validated with real data from Tokyo Expressway ultrasonic sensors. Ex- perimental results show that it is accurate and effective, and that it can differentiate traffic accident from other condition such as recurring traffic congestion.

Design and test of automatic detection platform for soil fragmentation rate in rotary tillage

As an important index of soil crushing performance of rotary tiller,the soil fragmentation rate is still limited to manual measurement.In this study,an automatic detection platform for soil fragmentation rate was designed,which integrated soil intake,screening,weighing and calculation of soil fragmentation rate.This platform can solve the problem that the index of the soil fragmentation rate cannot be detected quickly and effectively after rotary tillage,which leads to difficulty in field quality evaluation.The platform was mainly composed of a shovel soil module,conveying module,screening module,weighing module and automatic control system,which could realize single-line and multi-point automatic soil fragmentation rate detection.Based on the homogeneous dry slope model,the tilting angles of soil intake and soil feeding after rotary tillage on the platform were determined to be 30.10°and 26.67°,respectively.According to the principle of flow conservation,a rotary circulation screening module was designed to obtain soil particle size grading.A method based on the principle of multi-line and multi-point measurement was developed to detect soil fragmentation rate.The influence of screening speed on screening effect was analyzed,and the reasonable value of screening speed was determined to be 0.5 m/s.A field performance test was carried out in October 2019 to verify the detection performance of the platform.The results showed that,compared with the manual test method,the maximum test error was no more than 11%,the minimum test error was less than 4%,the maximum single test time was no more than 2 min,and the total test time of each test area was no more than 30 min.The efficiency of single-point detection was significantly better than the manual detection,which indicated that the design in this study met the requirements of rapid detection of soil fragmentation rate,and provided a new idea for the automatic detection of quality of rotary tillage.

An Automatic HFO Detection Method Combining Visual Inspection Features with Multi-Domain Features

As an important promising biomarker,high frequency oscillations(HFOs)can be used to track epileptic activity and localize epileptogenic zones.However,visual marking of HFOs from a large amount of intracranial electroencephalogram(iEEG)data requires a great deal of time and effort from researchers,and is also very dependent on visual features and easily influenced by subjective factors.Therefore,we proposed an automatic epileptic HFO detection method based on visual features and non-intuitive multi-domain features.To eliminate the interference of continuous oscillatory activity in detected sporadic short HFO events,the iEEG signals adjacent to the detected events were set as the neighboring environmental range while the number of oscillations and the peak–valley differences were calculated as the environmental reference features.The proposed method was developed as a MatLab-based HFO detector to automatically detect HFOs in multi-channel,long-distance iEEG signals.The performance of our detector was evaluated on iEEG recordings from epileptic mice and patients with intractable epilepsy.More than 90%of the HFO events detected by this method were confirmed by experts,while the average missed-detection rate was<10%.Compared with recent related research,the proposed method achieved a synchronous improvement of sensitivity and specificity,and a balance between low false-alarm rate and high detection rate.Detection results demonstrated that the proposed method performs well in sensitivity,specificity,and precision.As an auxiliary tool,our detector can greatly improve the efficiency of clinical experts in inspecting HFO events during the diagnosis and treatment of epilepsy.

An Infrared Touch System for Automatic Behavior Monitoring

Key requirements of successful animal behavior research in the laboratory are robustness,objectivity,and high throughput,which apply to both the recording and analysis of behavior.Many automatic methods of monitoring animal behavior meet these requirements.However,they usually depend on high-performing hardware and sophisticated software,which may be expensive.Here,we describe an automatic infrared behavior-monitor(AIBM)system based on an infrared touchscreen frame.Using this,animal positions can be recorded and used for further behavioral analysis by any PC supporting touch events.This system detects animal behavior in real time and gives closed-loop feedback using relatively low computing resources and simple algorithms.The AIBM system automatically records and analyzes multiple types of animal behavior in a highly efficient,unbiased,and low-cost manner.