The path planning of autonomous mobile robots(PPoAMR)is a very complex multi-constraint problem.The main goal is to find the shortest collision-free path from the starting point to the target point.By the fact that th...The path planning of autonomous mobile robots(PPoAMR)is a very complex multi-constraint problem.The main goal is to find the shortest collision-free path from the starting point to the target point.By the fact that the PPoAMR problem has the prior knowledge that the straight path between the starting point and the target point is the optimum solution when obstacles are not considered.This paper proposes a new path planning algorithm based on the prior knowledge of PPoAMR,which includes the fitness value calculation method and the prior knowledge particle swarm optimization(PKPSO)algorithm.The new fitness calculation method can preserve the information carried by each individual as much as possible by adding an adaptive coefficient.The PKPSO algorithm modifies the particle velocity update method by adding a prior particle calculated from the prior knowledge of PPoAMR and also implemented an elite retention strategy,which improves the local optima evasion capability.In addition,the quintic polynomial trajectory optimization approach is devised to generate a smooth path.Finally,some experimental comparisons with those state-of-the-arts are carried out to demonstrate the effectiveness of the proposed path planning algorithm.展开更多
This paper deals with a new approach based on Q-learning for solving the problem of mobile robot path planning in complex unknown static environments.As a computational approach to learning through interaction with th...This paper deals with a new approach based on Q-learning for solving the problem of mobile robot path planning in complex unknown static environments.As a computational approach to learning through interaction with the environment,reinforcement learning algorithms have been widely used for intelligent robot control,especially in the field of autonomous mobile robots.However,the learning process is slow and cumbersome.For practical applications,rapid rates of convergence are required.Aiming at the problem of slow convergence and long learning time for Q-learning based mobile robot path planning,a state-chain sequential feedback Q-learning algorithm is proposed for quickly searching for the optimal path of mobile robots in complex unknown static environments.The state chain is built during the searching process.After one action is chosen and the reward is received,the Q-values of the state-action pairs on the previously built state chain are sequentially updated with one-step Q-learning.With the increasing number of Q-values updated after one action,the number of actual steps for convergence decreases and thus,the learning time decreases,where a step is a state transition.Extensive simulations validate the efficiency of the newly proposed approach for mobile robot path planning in complex environments.The results show that the new approach has a high convergence speed and that the robot can find the collision-free optimal path in complex unknown static environments with much shorter time,compared with the one-step Q-learning algorithm and the Q(λ)-learning algorithm.展开更多
Current research on autonomous mobile robots focuses primarily on perceptual accuracy and autonomous performance.In commercial and domestic constructions,concrete,wood,and glass are typically used.Laser and visual map...Current research on autonomous mobile robots focuses primarily on perceptual accuracy and autonomous performance.In commercial and domestic constructions,concrete,wood,and glass are typically used.Laser and visual mapping or planning algorithms are highly accurate in mapping wood panels and concrete walls.However,indoor and outdoor glass curtain walls may fail to perceive these transparent materials.In this study,a novel indoor glass recognition and map optimization method based on boundary guidance is proposed.First,the status of glass recognition techniques is analyzed comprehensively.Next,a glass image segmentation network based on boundary data guidance and the optimization of a planning map based on depth repair are proposed.Finally,map optimization and path-planning tests are conducted and compared using different algorithms.The results confirm the favorable adaptability of the proposed method to indoor transparent plates and glass curtain walls.Using the proposed method,the recognition accuracy of a public test set increases to 94.1%.After adding the planning map,incorrect coverage redundancies for two test scenes reduce by 59.84%and 55.7%.Herein,a glass recognition and map optimization method is proposed that offers sufficient capacity in perceiving indoor glass materials and recognizing indoor no-entry regions.展开更多
Given the difficulty in hand coding task schemes, an intellectualized architecture of the autonomous micro mobile robot based behavior for fault repair was presented. Integrating the reinforcement learning and the...Given the difficulty in hand coding task schemes, an intellectualized architecture of the autonomous micro mobile robot based behavior for fault repair was presented. Integrating the reinforcement learning and the group behavior evolution simulating the human's learning and evolution, the autonomous micro mobile robot will automatically generate the suited actions satisfied the environment. However, the designer only devises some basic behaviors, which decreases the workload of the designer and cognitive deficiency of the robot to the environment. The results of simulation have shown that the architecture endows micro robot with the ability of learning, adaptation and robustness, also with the ability of accomplishing the given task.展开更多
This paper considers the formation control problem of multi-agent systems in a distributed fashion. Two cases of the information propagating topologies among multiple agents, characterized by graphics model, are consi...This paper considers the formation control problem of multi-agent systems in a distributed fashion. Two cases of the information propagating topologies among multiple agents, characterized by graphics model, are considered. One is fixed topology. The other is switching topology which represents the limited and less reliable information exchange. The local formation control strategies established in this paper are based on a simple modification of the existing consensus control strategies. Moreover, some existing convergence conditions are shown to be a special case of our model even in the continuous-time consensus case. Therefore, the results of this paper extend the existing results about the consensus problem.展开更多
In the mobile robotic systems a precise estimate of the robot pose (Cartesian [x y] position plus orientation angle theta) with the intention of the path planning optimization is essential for the correct performance,...In the mobile robotic systems a precise estimate of the robot pose (Cartesian [x y] position plus orientation angle theta) with the intention of the path planning optimization is essential for the correct performance, on the part of the robots, for tasks that are destined to it, especially when intention is for mobile robot autonomous navigation. This work uses a ToF (Time-of-Flight) of the RF digital signal interacting with beacons for computational triangulation in the way to provide a pose estimative at bi-dimensional indoor environment, where GPS system is out of range. It’s a new technology utilization making good use of old ultrasonic ToF methodology that takes advantage of high performance multicore DSP processors to calculate ToF of the order about ns. Sensors data like odometry, compass and the result of triangulation Cartesian estimative, are fused in a Kalman filter in the way to perform optimal estimation and correct robot pose. A mobile robot platform with differential drive and nonholonomic constraints is used as base for state space, plants and measurements models that are used in the simulations and for validation the experiments.展开更多
The development of intelligent algorithms for controlling autonomous mobile robots in real-time activities has increased dramatically in recent years.However,conventional intelligent algorithms currently fail to accur...The development of intelligent algorithms for controlling autonomous mobile robots in real-time activities has increased dramatically in recent years.However,conventional intelligent algorithms currently fail to accurately predict unexpected obstacles involved in tour paths and thereby suffer from inefficient tour trajectories.The present study addresses these issues by proposing a potential field integrated pruned adaptive resonance theory(PPART)neural network for effectively managing the touring process of autonomous mobile robots in real-time.The proposed system is implemented using the AlphaBot platform,and the performance of the system is evaluated according to the obstacle prediction accuracy,path detection accuracy,time-lapse,tour length,and the overall accuracy of the system.The proposed system provide a very high obstacle prediction accuracy of 99.61%.Accordingly,the proposed tour planning design effectively predicts unexpected obstacles in the environment and thereby increases the overall efficiency of tour navigation.展开更多
Recently there has been great interest in the idea that evolvable system based on the principle of artifcial intelligence can be used to continuously and autonomously adapt the behaviour of physically embedded systems...Recently there has been great interest in the idea that evolvable system based on the principle of artifcial intelligence can be used to continuously and autonomously adapt the behaviour of physically embedded systems such as autonomous mobile robots and intelligent home devices. Meanwhile, we have seen the introduction of evolvable hardware(EHW): new integrated electronic circuits that are able to continuously evolve to adapt the chages in the environment implemented by evolutionary algorithms such as genetic algorithm(GA) and reinforcement learning. This paper concentrates on developing a robotic navigation system whose basic behaviours are obstacle avoidance and light source navigation. The results demonstrate that the intrinsic evolvable hardware system is able to create the stable robotiiuc behaviours as required in the real world instead of the traditional hardware systems.展开更多
This paper presents a novel vision-based obstacle avoidance approach for the Autonomous Mobile Robot (AMR) with a Pan-Tilt-Zoom (PTZ) camera as its only sensing modality. The approach combines the morphological closin...This paper presents a novel vision-based obstacle avoidance approach for the Autonomous Mobile Robot (AMR) with a Pan-Tilt-Zoom (PTZ) camera as its only sensing modality. The approach combines the morphological closing operation based on Sobel Edge Detection Operation and the (μ-kσ) thresholding technique to detect obstacles to soften the various lighting and ground floor effects. Both the morphology method and thresholding technique are computationally simple. The processing speed of the algorithm is fast enough to avoid some active obstacles. In addition, this approach takes into account the history obstacle effects on the current state. Fuzzy logic is used to control the behaviors of AMR as it navigates in the environment. All behaviors run concurrently and generate motor response solely based on vision perception. A priority based on subsumption coordinator selects the most appropriate response to direct the AMR away from obstacles. Validation of the proposed approach is done on a Pioneer 1 mobile robot.展开更多
New approaches for testing of autonomous driving functions are using Virtual Reality (VR) to analyze the behavior of automated vehicles in various scenarios. The real time simulation of the environment sensors is stil...New approaches for testing of autonomous driving functions are using Virtual Reality (VR) to analyze the behavior of automated vehicles in various scenarios. The real time simulation of the environment sensors is still a challenge. In this paper, the conception, development and validation of an automotive radar raw data sensor model is shown. For the implementation, the Unreal VR engine developed by Epic Games is used. The model consists of a sending antenna, a propagation and a receiving antenna model. The microwave field propagation is simulated by a raytracing approach. It uses the method of shooting and bouncing rays to cover the field. A diffused scattering model is implemented to simulate the influence of rough structures on the reflection of rays. To parameterize the model, simple reflectors are used. The validation is done by a comparison of the measured radar patterns of pedestrians and cyclists with simulated values. The outcome is that the developed model shows valid results, even if it still has deficits in the context of performance. It shows that the bouncing of diffuse scattered field can only be done once. This produces inadequacies in some scenarios. In summary, the paper shows a high potential for real time simulation of radar sensors by using ray tracing in a virtual reality.展开更多
Recently, virtual realities and simulations play important roles in the development of automated driving functionalities. By an appropriate abstraction, they help to design, investigate and communicate real traffic sc...Recently, virtual realities and simulations play important roles in the development of automated driving functionalities. By an appropriate abstraction, they help to design, investigate and communicate real traffic scenario complexity. Especially, for edge cases investigations of interactions between vulnerable road users (VRU) and highly automated driving functions, valid virtual models are essential for the quality of results. The aim of this study is to measure, process and integrate real human movement behaviour into a virtual test environment for highly automated vehicle functionalities. The overall system consists of a georeferenced virtual city model and a vehicle dynamics model, including probabilistic sensor descriptions. By motion capture hardware, real humanoid behaviour is applied to a virtual human avatar in the test environment. Through retargeting methods, which enable the independency of avatar and person under test (PuT) dimensions, the virtual avatar diversity is increased. To verify the biomechanical behaviour of the virtual avatars, a qualitative study is performed, which funds on a representative movement sequence. The results confirm the functionality of the used methodology and enable PuT independence control of the virtual avatars in real-time.展开更多
As the advancement of driverless technology,together with information and communication technology moved at a fast pace,autonomous vehicles have attracted great attention from both industries and academic sectors duri...As the advancement of driverless technology,together with information and communication technology moved at a fast pace,autonomous vehicles have attracted great attention from both industries and academic sectors during the past decades.It is evident that this emerging technology has great potential to improve the pedestrian safety on roads,mitigate traffic congestion,increase fuel efficiency,and reduce greenhouse gas emissions.However,there is limited systematic research into the applications and public perceptions of autonomous vehicles in road transportation.The purpose of this systematic literature review is to synthesise and analyse existing research on the applications,implications,and public perceptions of autonomous vehicles in road transportation system.It is found that autonomous vehicles are the future of road transportation and that the negative perception of humans is rapidly changing towards autonomous vehicles.Moreover,to fully deploy autonomous vehicles in a road transportation system,the existing road transportation infrastructure needs significant improvement.This systematic literature review contributes to the comprehensive knowledge of autonomous vehicles and will assist transportation researchers and urban planners to understand the fundamental and conceptual framework of autonomous vehicle technologies in road transportation systems.展开更多
This paper focuses on autonomous motion control of a nonholonomic platform with a robotic arm, which is called mobile manipulator. It serves in transportation of loads in imperfectly known industrial environments with...This paper focuses on autonomous motion control of a nonholonomic platform with a robotic arm, which is called mobile manipulator. It serves in transportation of loads in imperfectly known industrial environments with unknown dynamic obstacles. A union of both procedures is used to solve the general problems of collision-free motion. The problem of collision-free motion for mobile manipulators has been approached from two directions, Planning and Reactive Control. The dynamic path planning can be used to solve the problem of locomotion of mobile platform, and reactive approaches can be employed to solve the motion planning of the arm. The execution can generate the commands for the servo-systems of the robot so as to follow a given nominal trajectory while reacting in real-time to unexpected events. The execution can be designed as an Adaptive Fuzzy Neural Controller. In real world systems, sensor-based motion control becomes essential to deal with model uncertainties and unexpected obstacles.展开更多
In the present work, autonomous mobile robot(AMR) system is intended with basic behaviour, one is obstacle avoidance and the other is target seeking in various environments. The AMR is navigated using fuzzy logic, n...In the present work, autonomous mobile robot(AMR) system is intended with basic behaviour, one is obstacle avoidance and the other is target seeking in various environments. The AMR is navigated using fuzzy logic, neural network and adaptive neurofuzzy inference system(ANFIS) controller with safe boundary algorithm. In this method of target seeking behaviour, the obstacle avoidance at every instant improves the performance of robot in navigation approach. The inputs to the controller are the signals from various sensors fixed at front face, left and right face of the AMR. The output signal from controller regulates the angular velocity of both front power wheels of the AMR. The shortest path is identified using fuzzy, neural network and ANFIS techniques with integrated safe boundary algorithm and the predicted results are validated with experimentation. The experimental result has proven that ANFIS with safe boundary algorithm yields better performance in navigation, in particular with curved/irregular obstacles.展开更多
基金This work was supported by the National Key R&D Funding of China(No.2018YFB1403702)the Zhejiang Provincial Natural Science Foundation of China for Distinguished Young Scholars(No.LR22F030003).
文摘The path planning of autonomous mobile robots(PPoAMR)is a very complex multi-constraint problem.The main goal is to find the shortest collision-free path from the starting point to the target point.By the fact that the PPoAMR problem has the prior knowledge that the straight path between the starting point and the target point is the optimum solution when obstacles are not considered.This paper proposes a new path planning algorithm based on the prior knowledge of PPoAMR,which includes the fitness value calculation method and the prior knowledge particle swarm optimization(PKPSO)algorithm.The new fitness calculation method can preserve the information carried by each individual as much as possible by adding an adaptive coefficient.The PKPSO algorithm modifies the particle velocity update method by adding a prior particle calculated from the prior knowledge of PPoAMR and also implemented an elite retention strategy,which improves the local optima evasion capability.In addition,the quintic polynomial trajectory optimization approach is devised to generate a smooth path.Finally,some experimental comparisons with those state-of-the-arts are carried out to demonstrate the effectiveness of the proposed path planning algorithm.
基金Project supported by the National Natural Science Foundation of China (Nos. 61075091,61105100,and 61240052)the Natural Science Foundation of Shandong Province,China (No.ZR2012FM036)the Independent Innovation Foundation of Shandong University,China (Nos. 2011JC011 and 2012JC005)
文摘This paper deals with a new approach based on Q-learning for solving the problem of mobile robot path planning in complex unknown static environments.As a computational approach to learning through interaction with the environment,reinforcement learning algorithms have been widely used for intelligent robot control,especially in the field of autonomous mobile robots.However,the learning process is slow and cumbersome.For practical applications,rapid rates of convergence are required.Aiming at the problem of slow convergence and long learning time for Q-learning based mobile robot path planning,a state-chain sequential feedback Q-learning algorithm is proposed for quickly searching for the optimal path of mobile robots in complex unknown static environments.The state chain is built during the searching process.After one action is chosen and the reward is received,the Q-values of the state-action pairs on the previously built state chain are sequentially updated with one-step Q-learning.With the increasing number of Q-values updated after one action,the number of actual steps for convergence decreases and thus,the learning time decreases,where a step is a state transition.Extensive simulations validate the efficiency of the newly proposed approach for mobile robot path planning in complex environments.The results show that the new approach has a high convergence speed and that the robot can find the collision-free optimal path in complex unknown static environments with much shorter time,compared with the one-step Q-learning algorithm and the Q(λ)-learning algorithm.
基金Supported by National Key Research and Development Program of China(Grant No.2022YFB4700400).
文摘Current research on autonomous mobile robots focuses primarily on perceptual accuracy and autonomous performance.In commercial and domestic constructions,concrete,wood,and glass are typically used.Laser and visual mapping or planning algorithms are highly accurate in mapping wood panels and concrete walls.However,indoor and outdoor glass curtain walls may fail to perceive these transparent materials.In this study,a novel indoor glass recognition and map optimization method based on boundary guidance is proposed.First,the status of glass recognition techniques is analyzed comprehensively.Next,a glass image segmentation network based on boundary data guidance and the optimization of a planning map based on depth repair are proposed.Finally,map optimization and path-planning tests are conducted and compared using different algorithms.The results confirm the favorable adaptability of the proposed method to indoor transparent plates and glass curtain walls.Using the proposed method,the recognition accuracy of a public test set increases to 94.1%.After adding the planning map,incorrect coverage redundancies for two test scenes reduce by 59.84%and 55.7%.Herein,a glass recognition and map optimization method is proposed that offers sufficient capacity in perceiving indoor glass materials and recognizing indoor no-entry regions.
文摘Given the difficulty in hand coding task schemes, an intellectualized architecture of the autonomous micro mobile robot based behavior for fault repair was presented. Integrating the reinforcement learning and the group behavior evolution simulating the human's learning and evolution, the autonomous micro mobile robot will automatically generate the suited actions satisfied the environment. However, the designer only devises some basic behaviors, which decreases the workload of the designer and cognitive deficiency of the robot to the environment. The results of simulation have shown that the architecture endows micro robot with the ability of learning, adaptation and robustness, also with the ability of accomplishing the given task.
基金the National Natural Science Foundation of China (No.60674071).
文摘This paper considers the formation control problem of multi-agent systems in a distributed fashion. Two cases of the information propagating topologies among multiple agents, characterized by graphics model, are considered. One is fixed topology. The other is switching topology which represents the limited and less reliable information exchange. The local formation control strategies established in this paper are based on a simple modification of the existing consensus control strategies. Moreover, some existing convergence conditions are shown to be a special case of our model even in the continuous-time consensus case. Therefore, the results of this paper extend the existing results about the consensus problem.
文摘In the mobile robotic systems a precise estimate of the robot pose (Cartesian [x y] position plus orientation angle theta) with the intention of the path planning optimization is essential for the correct performance, on the part of the robots, for tasks that are destined to it, especially when intention is for mobile robot autonomous navigation. This work uses a ToF (Time-of-Flight) of the RF digital signal interacting with beacons for computational triangulation in the way to provide a pose estimative at bi-dimensional indoor environment, where GPS system is out of range. It’s a new technology utilization making good use of old ultrasonic ToF methodology that takes advantage of high performance multicore DSP processors to calculate ToF of the order about ns. Sensors data like odometry, compass and the result of triangulation Cartesian estimative, are fused in a Kalman filter in the way to perform optimal estimation and correct robot pose. A mobile robot platform with differential drive and nonholonomic constraints is used as base for state space, plants and measurements models that are used in the simulations and for validation the experiments.
文摘The development of intelligent algorithms for controlling autonomous mobile robots in real-time activities has increased dramatically in recent years.However,conventional intelligent algorithms currently fail to accurately predict unexpected obstacles involved in tour paths and thereby suffer from inefficient tour trajectories.The present study addresses these issues by proposing a potential field integrated pruned adaptive resonance theory(PPART)neural network for effectively managing the touring process of autonomous mobile robots in real-time.The proposed system is implemented using the AlphaBot platform,and the performance of the system is evaluated according to the obstacle prediction accuracy,path detection accuracy,time-lapse,tour length,and the overall accuracy of the system.The proposed system provide a very high obstacle prediction accuracy of 99.61%.Accordingly,the proposed tour planning design effectively predicts unexpected obstacles in the environment and thereby increases the overall efficiency of tour navigation.
文摘Recently there has been great interest in the idea that evolvable system based on the principle of artifcial intelligence can be used to continuously and autonomously adapt the behaviour of physically embedded systems such as autonomous mobile robots and intelligent home devices. Meanwhile, we have seen the introduction of evolvable hardware(EHW): new integrated electronic circuits that are able to continuously evolve to adapt the chages in the environment implemented by evolutionary algorithms such as genetic algorithm(GA) and reinforcement learning. This paper concentrates on developing a robotic navigation system whose basic behaviours are obstacle avoidance and light source navigation. The results demonstrate that the intrinsic evolvable hardware system is able to create the stable robotiiuc behaviours as required in the real world instead of the traditional hardware systems.
基金TheNationalNaturalSienceFoundationofChina (No .6 2 385 2 )
文摘This paper presents a novel vision-based obstacle avoidance approach for the Autonomous Mobile Robot (AMR) with a Pan-Tilt-Zoom (PTZ) camera as its only sensing modality. The approach combines the morphological closing operation based on Sobel Edge Detection Operation and the (μ-kσ) thresholding technique to detect obstacles to soften the various lighting and ground floor effects. Both the morphology method and thresholding technique are computationally simple. The processing speed of the algorithm is fast enough to avoid some active obstacles. In addition, this approach takes into account the history obstacle effects on the current state. Fuzzy logic is used to control the behaviors of AMR as it navigates in the environment. All behaviors run concurrently and generate motor response solely based on vision perception. A priority based on subsumption coordinator selects the most appropriate response to direct the AMR away from obstacles. Validation of the proposed approach is done on a Pioneer 1 mobile robot.
文摘New approaches for testing of autonomous driving functions are using Virtual Reality (VR) to analyze the behavior of automated vehicles in various scenarios. The real time simulation of the environment sensors is still a challenge. In this paper, the conception, development and validation of an automotive radar raw data sensor model is shown. For the implementation, the Unreal VR engine developed by Epic Games is used. The model consists of a sending antenna, a propagation and a receiving antenna model. The microwave field propagation is simulated by a raytracing approach. It uses the method of shooting and bouncing rays to cover the field. A diffused scattering model is implemented to simulate the influence of rough structures on the reflection of rays. To parameterize the model, simple reflectors are used. The validation is done by a comparison of the measured radar patterns of pedestrians and cyclists with simulated values. The outcome is that the developed model shows valid results, even if it still has deficits in the context of performance. It shows that the bouncing of diffuse scattered field can only be done once. This produces inadequacies in some scenarios. In summary, the paper shows a high potential for real time simulation of radar sensors by using ray tracing in a virtual reality.
文摘Recently, virtual realities and simulations play important roles in the development of automated driving functionalities. By an appropriate abstraction, they help to design, investigate and communicate real traffic scenario complexity. Especially, for edge cases investigations of interactions between vulnerable road users (VRU) and highly automated driving functions, valid virtual models are essential for the quality of results. The aim of this study is to measure, process and integrate real human movement behaviour into a virtual test environment for highly automated vehicle functionalities. The overall system consists of a georeferenced virtual city model and a vehicle dynamics model, including probabilistic sensor descriptions. By motion capture hardware, real humanoid behaviour is applied to a virtual human avatar in the test environment. Through retargeting methods, which enable the independency of avatar and person under test (PuT) dimensions, the virtual avatar diversity is increased. To verify the biomechanical behaviour of the virtual avatars, a qualitative study is performed, which funds on a representative movement sequence. The results confirm the functionality of the used methodology and enable PuT independence control of the virtual avatars in real-time.
文摘As the advancement of driverless technology,together with information and communication technology moved at a fast pace,autonomous vehicles have attracted great attention from both industries and academic sectors during the past decades.It is evident that this emerging technology has great potential to improve the pedestrian safety on roads,mitigate traffic congestion,increase fuel efficiency,and reduce greenhouse gas emissions.However,there is limited systematic research into the applications and public perceptions of autonomous vehicles in road transportation.The purpose of this systematic literature review is to synthesise and analyse existing research on the applications,implications,and public perceptions of autonomous vehicles in road transportation system.It is found that autonomous vehicles are the future of road transportation and that the negative perception of humans is rapidly changing towards autonomous vehicles.Moreover,to fully deploy autonomous vehicles in a road transportation system,the existing road transportation infrastructure needs significant improvement.This systematic literature review contributes to the comprehensive knowledge of autonomous vehicles and will assist transportation researchers and urban planners to understand the fundamental and conceptual framework of autonomous vehicle technologies in road transportation systems.
文摘This paper focuses on autonomous motion control of a nonholonomic platform with a robotic arm, which is called mobile manipulator. It serves in transportation of loads in imperfectly known industrial environments with unknown dynamic obstacles. A union of both procedures is used to solve the general problems of collision-free motion. The problem of collision-free motion for mobile manipulators has been approached from two directions, Planning and Reactive Control. The dynamic path planning can be used to solve the problem of locomotion of mobile platform, and reactive approaches can be employed to solve the motion planning of the arm. The execution can generate the commands for the servo-systems of the robot so as to follow a given nominal trajectory while reacting in real-time to unexpected events. The execution can be designed as an Adaptive Fuzzy Neural Controller. In real world systems, sensor-based motion control becomes essential to deal with model uncertainties and unexpected obstacles.
文摘In the present work, autonomous mobile robot(AMR) system is intended with basic behaviour, one is obstacle avoidance and the other is target seeking in various environments. The AMR is navigated using fuzzy logic, neural network and adaptive neurofuzzy inference system(ANFIS) controller with safe boundary algorithm. In this method of target seeking behaviour, the obstacle avoidance at every instant improves the performance of robot in navigation approach. The inputs to the controller are the signals from various sensors fixed at front face, left and right face of the AMR. The output signal from controller regulates the angular velocity of both front power wheels of the AMR. The shortest path is identified using fuzzy, neural network and ANFIS techniques with integrated safe boundary algorithm and the predicted results are validated with experimentation. The experimental result has proven that ANFIS with safe boundary algorithm yields better performance in navigation, in particular with curved/irregular obstacles.