Mining a coal seam below a heating goaf with a force auxiliary ventilation system at Longhua underground coal mine, China

Extraction of a coal seam which lies not far below a heating goafcan be a major safety challenge. A force auxiliary ventilation system was adopted as a control method in successful extraction and recovery of the panel 30110 of the #3-1 coal seam, which is about 30-40 rn below the heating goaf of the #2-2 seam at Longhua underground coal mine, Shanxi Province, China. Booster fans and ventilation control devices such as doors and regulators were used in the system. The results show that, provided that a force auxiliary ventilation system is properly designed to achieve a pressure balance between a panel and its overlying goat＇, the system can be used to extract a coal seam overlain by a heating goal. This paper describes the design, installation and performance of the ventilation system during the extraction and recovery phases of the oanel 30110.

Progress in the Secondary Heating System for the HL-2A Tokamak

In 2006, the following work on secondary heating systems for HL-2A tokamak have been done： the development of an electron cyclotron resonance heating （ECRH） system, the improvement of lower hybrid resonance heating （LHCD） system and the fabrication on neutral beam injection （NBI） system.

Simulation on the deformation controlling of T-joint LBW with auxiliary heat source for high strength aluminum alloy

To avoid the angular deformation of aluminum alloy T-joint weldments, a new method named welding with auxiliary heat source is proposed. The welding simulation is performed with the commercial finite element software Abaqus and FORTRAN programme encoding a special conical heat source with Gaussian volumetric distribution of flux. The influence of the local model on the temperature, residual stress, and welding deformation distributions is investigated. The findings show that angular deformation achieved through numerical computation completely consists with the experimental result which has proved the effectiveness of the finite element methods developed. Various measurements performed on small-scale welded test specimens provide a data base of experimental results that serves as a bench mark for qualification of the simulation result. Finally, the residual stress and strain states in a T-joint are predicted.

Conceptual Design of Neutral Beam Injection System for EAST

Neutral beam injection （NBI） system with two neutral beam injections will be con- structed on the Experimental Advanced Superconducting Tokamak （EAST） in two stages for high power auxiliary plasmas heating and non-inductive current drive. Each NBI can deliver 2-4 MW beam power with 50-80 keV beam energy in 10-100 s pulse length. Each elements of the NBI system are presented in this contribution.

Simulations of Reversed Shear Configuration in EAST

The reversed shear （RS） mode is one of the advanced configurations being considered in EAST. Predictive simulations of EAST reversed shear configuration are carried out using an 1.5D equilibrium evolution code. In order to have the desired monotonic q-profile during a tokamak discharge, a successful preparation phase is required. In our simulation, the plasma current is ramped up from 100 kA to a fiat-top maximum of 1.0 MA for four seconds. An ICRH power of 1 MW is applied until the plasma shape is formed at the moment of 4 s, and then the power is raised to 3 MW. A LHCD power of 3.5 MW is applied from ls to optimize the plasma current density profile. A series of simulations are performed to study the influence of the time of applying the auxiliary heating on the plasma parameters. Based on these simulations, a scheme is proposed and tested for the control of the safety factor profile, which is very useful in real time profile control in tokamak experiments.

Thermo-Flow Performances for the Main-Auxiliary Integrated Natural Draft Dry Cooling System

Recently,natural draft dry cooling system with the main-auxiliary integrated air-cooled heat exchangers in the up and lower layers,has drawn attention to the electric power industry.This research firstly develops two physical models for the integrated cooling system,namely Case A and Case B.In Case A,the main air-cooled heat exchanger is arranged in the upper layer and the auxiliary air-cooled heat exchanger arranged in the lower layer,while in Case B,the two heat exchanger systems are arranged in the opposite way.And then,directing at the engineering TMCR and TRL 1 working conditions,the unit-local-overall thermo-flow characteristics of Case A and Case B are obtained and compared by numerical simulation.The findings show that,for the auxiliary air-cooled exchanger,Case A has obviously higher cooling performances than Case B,with the difference varying from 5.46%to 7.55%.Whereas,for the main air-cooled exchanger,Case B shows the recovered cooling performances,with the difference changing from 1.15%to 2.99%.Case A is preferably recommended to the engineering application in consideration of more strict cooling demand of the auxiliary cooling system.Conclusively,this research will provide some theoretical guidelines for the design and construction of the main-auxiliary integrated natural draft dry cooling system.

Analysis and survey of the application of solar dryers in eastern Nigeria

A survey on the use of solar dryers for drying purposes was carried out in some communities in eastern Nigeria.The objective of the study was to ascertain the extent uses of solar dryers by local farmers and the rural populace.The survey method included oral interview and questionnaire administration.The results of the study revealed that the practical use of solar dryers is absent domestically and industrially.However,great enthusiasm was shown by the farmers in the use of solar crop dryers if their performance is satisfactory with respect to quality and quantity of products dried at a given time interval.Most farmers rejected the idea of establishing communally maintained and operated systems but preferred commercialized systems where payments are made per unit quantity of products dried.The study therefore recommends the development of affordable solar crop dryers with auxiliary heat sources to mitigate the effects of daily and seasonal fluctuation in solar radiation in order to cope with the demands of a profit oriented commercial drying system.Such a system holds a lot of promises for entrepreneurs.